arXiv subjects

Lucas Labadie

Publications and source records attributed to Lucas Labadie.

At least 19 recordsLinked to original sources

arXiv2026

Pushing high angular resolution and high contrast observations on the VLTI from Y to L band with the Asgard instrumental suite: integration status and plans

ESO's VLTI has a history of record-breaking discoveries in astrophysics using high-angular resolution instrumentation. Its latest visitor instrument, the Asgard instrumental suite, is one key to further enhance the potential of the facility, particularly in the very near-infrared. It comprises four natively collaborating instruments: HEIMDALLR, a K-band fringe tracker, wavefront corrector and stellar interferometer in K band, with the same optics; Baldr, an H-band Zernike wavefront sensor; BIFROST, an Y-J-H-band photonic combiner whose main science case is studying the formation processes and properties of stellar and planetary systems; and NOTT, an L-band nulling interferometer for imaging young planetary systems. Each of these instruments promise significant advances in their respective science goals that scale with their technical challenges and technology innovations. The integration of Asgard is planned in three phases. The first one (integration, commissioning of HEIMDALLR and Baldr) is successfully done. In this paper, we show an overview of the current progress of the integration of Asgard, the first results of the on-sky commissioning of HEIMDALLR and the future steps and observing policies for Asgard to serve the broader community.

astro-ph.IM↗

arXiv2026

Sensing ELT petal modes with a discrete beam combiner: an end-to-end theoretical model

The European Southern Observatory's Extremely Large Telescope (ELT), the 39-m telescope under construction in Chile, forms its entrance pupil from 798 hexagonal segments that the six 0.5-m-wide spider arms fragment into six "petals". The low-wind / island effect, adaptive-optics residuals, and mechanical drift imprint an independent piston on each petal. These differential-piston (petal) modes remain largely undetected by the ELT's baseline continuous-pupil wavefront sensors, a major bottleneck for diffraction-limited, high-contrast imaging. This paper presents a complete theoretical model of a single-mode photonic discrete beam combiner (DBC) configured to sense the six petal pistons. The model constructs the coupled-mode description of a two-dimensional evanescently coupled waveguide lattice with six inputs and forty-five outputs and derives its visibility-to-pixel matrix (V2PM); treats the pupil remapping that routes one sub-aperture per petal into the six inputs; develops the five-dimensional petal-mode basis of the fragmented pupil; and propagates the petal modes through the DBC to quantify the sensitivity. Optimising the input-port spacing and interaction length by minimising the V2PM condition number yields a well-conditioned device (CN = 10.4). It recovers petal pistons with unit linear gain over the full +/-lambda/2 (+/-800 nm) unambiguous range and separates the five modes with negligible cross-talk (< 10^-3). For 1% photometric noise, the reconstructed-piston error is 4.7 nm rms at lambda_0 = 1.6 micron. Tested against petal amplitudes from end-to-end ELT simulations (~40-300 nm rms atmospheric residual; ~0.3-1 micron low-wind events), the DBC recovers each piston to a few nm rms at H band, with a two-wavelength extension capturing the larger events. The DBC is therefore a compact, chromatically robust petalometer for the fragmented ELT pupil.

astro-ph.IM↗

arXiv2026

Using VLTI/GRAVITY+ to determine the identity of a third planet candidate in the PDS 70 system

Detections of protoplanets are rare and protoplanetary disk features mischaracterized as planets are common. PDS 70 is one of only two stars known to host multiple confirmed protoplanets, PDS 70 b and c, and repeat detections of a third point-like source in the system suggest the presence of third inner planet. However, previous observations of this third source are insufficient to distinguish whether it is a planet or a concentrated dust clump in Keplerian motion. Our observations with VLTI/GRAVITY+ did not re-detect this point-like source, suggesting that it is, in fact, a dust clump and not a planet. These observations demonstrate how the angular resolving power of VLTI/GRAVITY+ can be used to distinguish between protoplanets and protoplanetary disk features.

astro-ph.EP↗

arXiv2026

Resolving the smallest scales of massive star formation: A case for next-generation thermal-infrared interferometers

This white paper was submitted to the European Southern Observatory (ESO) as part of the "Expanding horizons: transforming astronomy in the 2040s" call. Understanding how massive stars assemble their mass is a major astrophysical challenge, primarily because the critical accretion, ejection, and fragmentation processes occurring within the innermost 100 au remain largely inaccessible. Current facilities, such as ALMA and near-infrared interferometers, either lack the resolution to probe the compact high-mass star-disk interaction zone or are severely hindered by high extinction and marginal spectral resolution. To bridge this observational gap, this white paper advocates for next-generation thermal-infrared interferometers operating in the L, M, N, and Q bands to directly observe warm dust, hot gas, and embedded protostars at sub-milliarcsecond scales. These advanced capabilities will provide unprecedented access to a rich molecular inventory and spatially resolved spectroscopy, which are crucial for disentangling accretion streams, disk winds, and fragmentation mechanisms on dynamical timescales. We propose that developing heterodyne-based, long-baseline interferometry at high, dry sites represents the most transformative and realistic pathway to finally unveil the complete picture of massive star formation.

astro-ph.IM↗

arXiv2025

System Analysis for a high-precision high-accuracy Astrometric instrument for HWO

This study presents a comprehensive system analysis for an instrument onboard the Habitable Worlds Observatory (HWO), designed for high-precision, high-accuracy differential astrometry, with the primary scientific goal to determine the mass of Earth-like planets around the nearest Sun-like stars. The analysis integrates the definition of the mission profile, the instrumental concept architecture, and an error budget that breaks down the key contributors to the sub-micro arcses precision required for a single measurement. A portion of this budget addresses photo-center estimation for both the target and calibration stars used in differential astrometry. Other major contributors are related to instrumental control of systematics in the reconstruction of differential angle measurements from pixel data (focal plane calibration) to on sky line of sight (telescope distortion calibration). End-of-mission astrometry requires multiple observations (typically 100) of the same target distributed over the mission lifetime. We assess the mission profile to estimate the fraction of survey time required for astrometric survey to achieve the science objective. The proposed architecture of the instrument concept is derived from error budget and mission constraints based on a large visible detector array composed of an assembly of multiple CMOS sensor chips resulting in an overall gigapixel focal plane. We evaluate the Technology Readiness Level (TRL) and propose a way forward reaching TRL 5 level for key technologies by the Mission Consolidation Review in 2029.

astro-ph.IM↗

arXiv2024

A binary system in the S cluster close to the supermassive black hole Sagittarius A*

High-velocity stars and peculiar G objects orbit the central supermassive black hole (SMBH) Sagittarius A* (Sgr A*). Together, the G objects and high-velocity stars constitute the S cluster. In contrast with theoretical predictions, no binary system near Sgr A* has been identified. Here, we report the detection of a spectroscopic binary system in the S cluster with the masses of the components of 2.80 $\pm$ 0.50 M$_{\odot}$ and 0.73 $\pm$ 0.14 M$_{\odot}$, assuming an edge-on configuration. Based on periodic changes in the radial velocity, we find an orbital period of 372 $\pm$ 3 days for the two components. The binary system is stable against the disruption by Sgr A* due to the semi-major axis of the secondary being 1.59 $\pm$ 0.01 AU, which is well below its tidal disruption radius of approximately 42.4 AU. The system, known as D9, shows similarities to the G objects. We estimate an age for D9 of 2.7$^{+1.9}_{-0.3}$ x 10$^6$ yr that is comparable to the timescale of the SMBH-induced von Zeipel-Lidov-Kozai cycle period of about 10$^6$ yr, causing the system to merge in the near future. Consequently, the population of G objects may consist of pre-merger binaries and post-merger products. The detection of D9 implies that binary systems in the S cluster have the potential to reside in the vicinity of the supermassive black hole Sgr A* for approximately 10$^6$ years.

astro-ph.GA↗

arXiv2024

High Precision Astrometry Science in the Context of Space Mission Prospectives

Astrometry is one of the oldest branches of astronomy which measures the position, the proper motion and parallax of celestial objects. Following the Hipparcos and Gaia missions that have measured several billions of them using global astrometry, we propose to increase astrometry precision on pointed objects using differential astrometry in a large field in order to unravel rocky planets in habitable zones of stars in the Sun vicinity and investigate the nature of dark matter in galactic environments as recommended by the ESA Senior Committee in the Voyager 2050 prospective. Substantial technology developments in a number of critical areas is needed in order to reach the highest required precision of sub-micro-arcsecond. One of them is CMOS image sensors using the stitching technique to merge the multiple design structures on the wafer and produce array with very large number of pixels. Another one is to calibrate the pixel positions using projecting modulating interferometric laser fringes on the array. Finally, the distortion of the optical system can be monitored and compensated using reference stars as metrology sources. The final precision depends on the diameter and the field of view of the telescope that is used as well as the time spent on each target. We present here the science goals that can be achieved with such missions either within the framework of an ESA Medium-class mission or even in the NASA most challenging Habitable Worlds Observatory, a large space telescope recommended by the American Astronomy and Astrophysics prospective for the 2020s and designed specifically to search for signs of life on planets orbiting other stars.

astro-ph.EP↗

arXiv2024

Asgard/NOTT: water vapor and CO$_2$ atmospheric dispersion compensation system

To leverage the angular resolution of interferometry at high contrast, one must employ specialized beam-combiners called interferometric nullers. Nullers discard part of the astrophysical information to optimize the recording of light present in the dark fringe of the central source. Asgard/NOTT will deploy a beam-combination scheme offering good instrumental noise rejection when phased appropriately, but for which information is degenerate on the outputs, prompting a dedicated tuning strategy using the science detector. The dispersive effect of water vapor can be corrected with prisms forming a variable thickness of glass. But observations in the L band suffer from an additional and important chromatic effect due to longitudinal atmospheric dispersion coming from a resonance of CO2 at 4.3 micron. To compensate for this effect efficiently, a novel type of compensation device will be deployed leveraging a gas cell of variable length at ambient pressure. After reviewing the impact of water vapor and CO2, we present the design of this atmospheric dispersion compensation device and describe a strategy to maintain this tuning on-sky.

astro-ph.IM↗

arXiv2024

The Evaporating Massive Embedded Stellar Cluster IRS 13 Close to Sgr A*. II. Kinematic structure

The existence of two distinct and apparently unrelated populations of dusty stellar objects in the Nuclear Stellar Cluster (NSC) of the Milky Way, namely IRS 13 and the S-cluster, are potentially prone to a general process describing the star formation history in the Galactic Center (GC). The former cluster is thought to be entangled in the clockwise and counterclockwise disks, a large-scale stellar distribution revealed by the analysis of stars at different distances from Sgr A*, the supermassive black hole in the GC. Recently, this large-scale distribution was reported to exhibit a multi-disk structure with at least four components. Motivated by this finding, we revisit the anisotropic IRS 13 cluster and find strong evidence for a disk-like structure. An examination of about 50 individual stellar orbits reveals a new structure that does not follow any trend known in the literature. Furthermore, we investigate the possibility of an inspiral cluster undergoing star formation processes, as proposed by several authors. Using a simplified N-body simulation to reproduce our observational results, we conclude that, under certain conditions, a massive cluster can migrate from the Circum Nuclear Disk toward the inner parsec. Based on this classification, we revisit the large-scale NACO (VLT) observations of IRS 13 and find evidence for a separation of the cluster into a gravitationally stable core remnant and a dissipating part. With the velocity-resolved H30α line and the broadband spectral energy distribution of IRS 13E3, we provide tentative support for the existence of an intermediate-mass black hole of ~ 3 x 10^26 M_sun surrounded by a hot gaseous stream.

astro-ph.GA↗

arXiv2024

L-band nulling interferometry at the VLTI with Asgard/NOTT: status and plans

NOTT (formerly Hi-5) is the L'-band (3.5-4.0~microns) nulling interferometer of Asgard, an instrument suite in preparation for the VLTI visitor focus. The primary scientific objectives of NOTT include characterizing (i) young planetary systems near the snow line, a critical region for giant planet formation, and (ii) nearby main-sequence stars close to the habitable zone, with a focus on detecting exozodiacal dust that could obscure Earth-like planets. In 2023-2024, the final warm optics have been procured and assembled in a new laboratory at KU Leuven. First fringes and null measurements were obtained using a Gallium Lanthanum Sulfide (GLS) photonic chip that was also tested at cryogenic temperatures. In this paper, we present an overall update of the NOTT project with a particular focus on the cold mechanical design, the first results in the laboratory with the final NOTT warm optics, and the ongoing Asgard integration activities. We also report on other ongoing activities such as the characterization of the photonic chip (GLS, LiNbO3, SiO), the development of the exoplanet science case, the design of the dispersion control module, and the progress with the self-calibration data reduction software.

astro-ph.IM↗

arXiv2024

Pushing high angular resolution and high contrast observations on the VLTI from Y to L band with the Asgard instrumental suite: integration status and plans

ESO's Very Large Telescope Interferometer has a history of record-breaking discoveries in astrophysics and significant advances in instrumentation. The next leap forward is its new visitor instrument, called Asgard. It comprises four natively collaborating instruments: HEIMDALLR, an instrument performing both fringe tracking and stellar interferometry simultaneously with the same optics, operating in the K band; Baldr, a Strehl optimizer in the H band; BIFROST, a spectroscopic combiner to study the formation processes and properties of stellar and planetary systems in the Y-J-H bands; and NOTT, a nulling interferometer dedicated to imaging nearby young planetary systems in the L band. The suite is in its integration phase in Europe and should be shipped to Paranal in 2025. In this article, we present details of the alignment and calibration unit, the observing modes, the integration plan, the software architecture, and the roadmap to completion of the project.

astro-ph.IM↗

arXiv2024

Asgard/NOTT: L-band nulling interferometry at the VLTI. II. Warm optical design and injection system

Asgard/NOTT (previously Hi-5) is a European Research Council (ERC)-funded project hosted at KU Leuven and a new visitor instrument for the Very Large Telescope Interferometer (VLTI). Its primary goal is to image the snow line region around young stars using nulling interferometry in the L-band (3.5 to 4.0)$μ$m, where the contrast between exoplanets and their host stars is advantageous. The breakthrough is the use of a photonic beam combiner, which only recently allowed the required theoretical raw contrast of $10^{-3}$ in this spectral range. Nulling interferometry observations of exoplanets also require a high degree of balancing between the four pupils of the VLTI in terms of intensity, phase, and polarization. The injection into the beam combiner and the requirements of nulling interferometry are driving the design of the warm optics and the injection system. The optical design up to the beam combiner is presented. It offers a technical solution to efficiently couple the light from the VLTI into the beam combiner. During the coupling, the objective is to limit throughput losses to 5% of the best expected efficiency for the injection. To achieve this, a list of different loss sources is considered with their respective impact on the injection efficiency. Solutions are also proposed to meet the requirements on beam balancing for intensity, phase, and polarization. The different properties of the design are listed, including the optics used, their alignment and tolerances, and their impact on the instrumental performances in terms of throughput and null depth. The performance evaluation gives an expected throughput loss of less than <6.4% of the best efficiency for the injection and a null depth of $\sim2.10^{-3}$, mainly from optical path delay errors outside the scope of this work.

astro-ph.IM↗

arXiv2023

2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments

Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms.

astro-ph.IM↗

arXiv2023

The Evaporating Massive Embedded Stellar Cluster IRS 13 Close to Sgr A*. I. Detection of a rich population of dusty objects in the IRS 13 cluster

A detailed analysis of the Nuclear Stellar Cluster (NSC) concedes not only the existence of the Scluster with its fast-moving stars and the supermassive black hole (SMBH) Sgr A*. It also reveals an embedded region of gas and dust with an exceptionally high stellar density called IRS 13. The IRS 13 cluster can be divided into the northern and the eastern counterparts, called IRS 13N and IRS 13E, respectively. This work will focus on both regions and study their most prominent members using rich infrared and radio/submm data baselines. Applying a multiwavelength analysis enables us to determine a comprehensive photometric footprint of the investigated cluster sample. Using the raytracing-based radiative transfer model HYPERION, the spectral energy distribution of the IRS 13 members suggests a stellar nature of the dusty sources. These putative Young Stellar Objects (YSOs) have a comparable spectroscopic identification to the D and G sources in or near the S cluster. Furthermore, we report the existence of a population of dusty sources in IRS 13 that can be mostly identified in the H-, K-, and Lband. Together with the objects reported in literature, we propose that this population is the outcome of a recent star formation process. Furthermore, we report that these presumably young objects are arranged in a disk structure. Although it cannot be excluded that the intrinsic arrangement of IRS 13 does show a disk structure, we find indications that the investigated cluster sample might be related to the counterclockwise disk.

astro-ph.GA↗

arXiv2023

X3: a high-mass Young Stellar Object close to the supermassive black hole Sgr~A*

To date, the proposed observation of Young Stellar Objects (YSOs) in the Galactic center (GC) still raises the question where and how these objects could have formed due to the violent vicinity of Sgr~A*. Here, we report the multi-wavelength detection of a highly dynamic YSO close to Sgr~A* that might be a member of the IRS13 cluster. We observe the beforehand known coreless bow-shock source X3 in the near- and mid-infrared (NIR/MIR) with SINFONI (VLT), NACO (VLT), ISAAC (VLT), VISIR (VLT), SHARP (NTT), and NIRCAM2 (KECK). In the radio domain, we use CO continuum and H30$α$ ALMA observations to identify system components at different temperatures and locations concerning the central stellar source. It is suggested that these radio/submm observations in combination with the NIR Br$γ$ line can be associated with a protoplanetary disk of the YSO which is consistent with manifold VISIR observations that reveal complex molecules and elements such as PAH, SIV, NeII and ArIII in a dense and compact region. Based on the photometric multi-wavelength analysis, we infer the mass of $15^{+10}_{-5} M_{\odot}$ for the YSO with a related age of a few $10^4$ yr. Due to this age estimate and the required relaxation time scales for high-mass stars, this finding is an indication for ongoing star formation in the inner parsec. The proper motion and 3d distance imply a relation of X3 and IRS13. We argue that IRS13 may serve as a birthplace for young stars that are ejected due to the evaporation of the cluster.

astro-ph.GA↗

arXiv2022

Asgard/NOTT: L-band nulling interferometry at the VLTI I. Simulating the expected high-contrast performance

Context: NOTT (formerly Hi-5) is a new high-contrast L' band (3.5-4.0 \textmu m) beam combiner for the VLTI with the ambitious goal to be sensitive to young giant exoplanets down to 5 mas separation around nearby stars. The performance of nulling interferometers in these wavelengths is affected both by fundamental noise from the background and by the contributions of instrumental noises. This motivates the development of end-to-end simulations to optimize these instruments. Aims: To enable the performance evaluation and inform the design of such instruments on the current and future infrastructures, taking into account the different sources of noise, and their correlation. Methods: SCIFYsim is an end-to-end simulator for single mode filtered beam combiners, with an emphasis on nulling interferometers. It is used to compute a covariance matrix of the errors. Statistical detection tests based on likelihood ratios are then used to compute compound detection limits for the instrument. Results: With the current assumptions on the performance of the wavefront correction systems, the errors are dominated by correlated instrumental errors down to stars of magnitude 6-7 in the L band, beyond which thermal background from the telescopes and relay system becomes dominant. Conclusions: SCIFYsim is suited to anticipate some of the challenges of design, tuning, operation and signal processing for integrated optics beam combiners. The detection limits found for this early version of NOTT simulation with the unit telescopes are compatible with detections at contrasts up to $10^5$ in the L band at separations of 5 to 80 mas around bright stars.

astro-ph.IM↗

arXiv2022

Locating dust and molecules in the inner circumstellar environment of R~Sculptoris with MATISSE

AGB stars are one of the main sources of dust production in the Galaxy. However, it is not clear what this process looks like and where the dust is condensing in the circumstellar environment. By characterizing the location of the dust and the molecules in the close environment of an AGB star, we aim to achieve a better understanding the history of the dust formation process. We observed the carbon star R Scl with the VLTI-MATISSE instrument in L- and N-bands. The high angular resolution of the VLTI observations, combined with a large uv-plane coverage allowed us to use image reconstruction methods. To constrain the dust and molecules' location, we used two different methods: MIRA image reconstruction and the 1D code RHAPSODY. We found evidence of C2H2 and HCN molecules between 1 and 3.4 Rstar which is much closer to the star than the location of the dust (between 3.8 and 17.0 Rstar). We also estimated a mass-loss rate of 1.2+-0.4x10-6 Msun per yr. In the meantime, we confirmed the previously published characteristics of a thin dust shell, composed of amorphous carbon (amC) and silicon carbide (SiC). However, no clear SiC feature has been detected in the MATISSE visibilities. This might be caused by molecular absorption that can affect the shape of the SiC band at 11.3 micron. The appearance of the molecular shells is in good agreement with predictions from dynamical atmosphere models. For the first time, we co-located dust and molecules in the environment of an AGB star. We confirm that the molecules are located closer to the star than the dust. The MIRA images unveil the presence of a clumpy environment in the fuzzy emission region beyond 4.0 Rstar. Furthermore, with the available dynamic range and angular resolution, we did not detect the presence of a binary companion. Additional observations combining MATISSE and SAM-VISIR instrument should enable this detection in future studies.

astro-ph.SR↗

arXiv2022

L-band nulling interferometry at the VLTI with Asgard/Hi-5: status and plans

Hi-5 is the L'-band (3.5-4.0 $μ$m) high-contrast imager of Asgard, an instrument suite in preparation for the visitor focus of the VLTI. The system is optimized for high-contrast and high-sensitivity imaging within the diffraction limit of a single UT/AT telescope. It is designed as a double-Bracewell nulling instrument producing spectrally-dispersed (R=20, 400, or 2000) complementary nulling outputs and simultaneous photometric outputs for self-calibration purposes. In this paper, we present an update of the project with a particular focus on the overall architecture, opto-mechanical design of the warm and cold optics, injection system, and development of the photonic beam combiner. The key science projects are to survey (i) nearby young planetary systems near the snow line, where most giant planets are expected to be formed, and (ii) nearby main sequence stars near the habitable zone where exozodiacal dust that may hinder the detection of Earth-like planets. We present an update of the expected instrumental performance based on full end-to-end simulations using the new GRAVITY+ specifications of the VLTI and the latest planet formation models.

astro-ph.IM↗