arXiv subjects

Lucia Sorba

Publications and source records attributed to Lucia Sorba.

At least 19 recordsLinked to original sources

arXiv2026

Emission dynamics in zincblende InAsxP1-x quantum dots in InP nanowires: influence of quantum dot size, composition and nanowire geometry

Hereby, we present an experimental and theoretical investigation of emission dynamics in zincblende InAsxP1-x quantum dots (QDs) embedded in InP nanowires (NWs) grown via vapour-liquid-solid mechanism by chemical beam epitaxy, using Au nanoparticles as a nucleation catalyst. By measuring time-resolved photoluminescence from an ensemble of QD-NWs it was possible to determine the exciton lifetime dependence on QD composition and height. Changes in the InP shell thickness surrounding the InP NW stem with a QD, brought additional insight into the influence of photonic environment on the carrier dynamics. High-resolution transmission electron microscopy, combined with energy-dispersive X-ray spectroscopy, provided actual structural parameters. The experimentally obtained lifetimes were interpreted in the light of results of 8 band kp calculations combined with configuration-interaction model to take into account the Coulomb interactions and finite-difference time domain photonic simulations to include the effect of optical confinement. The full understanding of the experimental results required considering both, the changes in the QD potential and the Purcell effect, the latter leading to spontaneous emission inhibition in the case of NWs with thin InP shell.

cond-mat.mes-hall↗

arXiv2026

Magnetically Induced Switching-Current Jumps in InAs/Al Josephson Junctions

We report Barkhausen-like switching at millitesla fields in an $n$-doped InAs/Al nanowire Josephson junction, which serves as an interferometric probe of intrinsic magnetic reconfigurations, as evidenced by discrete switching-current jumps. At $T=30$~mK the device displays a Fraunhofer-like modulation with $I_{\mathrm{sw}}(0)\approx 0.24~\mu\mathrm{A}$ and an abrupt transition at $|B|\approx 3~\mathrm{mT}$ between two branches differing by $\Delta I_{\mathrm{sw}}\approx 0.13~\mu\mathrm{A}$. By tracking the characteristic field scales from $30$ to $900$~mK, we find that the jump field is essentially temperature-independent, whereas the superconducting critical field decreases with temperature, as expected for thin Al films. The sharp discontinuity, sweep-direction asymmetry, and reproducibility across repeated scans point to avalanche-like switching between metastable magnetic configurations of the local magnetic texture, which are directly coupled to the weak link. Within an effective-field framework, each reconfiguration modifies a local field offset, thereby reshaping the interference response and leading to an abrupt reorganization of the switching-current pattern.

cond-mat.mes-hall↗

arXiv2026

Extremely weak electron-phonon coupling in Josephson junctions built on InAs on Insulator

InAs-on-Insulator (InAsOI) enables an effective superconducting proximity effect and extremely weak electron-phonon (e-ph) coupling, allowing precise electronic-temperature control with minimal power. Using Josephson junction thermometry, we extract sub-Kelvin e-ph coupling parameters, confirming strong thermal decoupling and robust superconducting performance. The combination of weak e-ph interaction and full electrostatic tunability makes InAsOI a powerful platform for coherent caloritronics, ultrasensitive bolometry, single-photon detection, and gate-controlled superconducting thermal circuits.

cond-mat.supr-con↗

arXiv2026

Growth and Transport Properties of InAsSb Nanoflags

The present work reports, for the first time, the growth of high-quality free-standing InAsSb nanoflags and their electronic properties. Different growth conditions have been explored, and zinc-blende InAsSb nanoflags of various composition have been obtained. In particular, InAs0.77Sb0.23 nanoflags are on average (2000+-180) nm long, (640+-50) nm wide, and (130+-30) nm thick. We show that these nanoflags have a Land\'e g-factor larger than InAs and InSb and a mobility comparable to those of the best performing InAs and InSb nanoflags. Besides, we show evidence for a surface Fermi level pinning in the conductance band of these InAs0.77Sb0.23 nanoflags, similar to the well-known behavior of InAs. This promises to make InAsSb easy to couple to superconductors, while keeping or improving many of the features that make InSb an interesting material for quantum applications.

cond-mat.mtrl-sci↗

arXiv2025

Giant thermal modulation via a semiconductor-superconductor photonic field-effect heat transistor

We present a groundbreaking demonstration of thermal modulation in a field-effect-controllable semiconductor-superconductor hybrid structure, wherein the heating mechanism is exclusively radiative. The architecture comprises two reservoirs separated by $\sim 1$ mm and interconnected via a completely non-galvanic electrical circuit, enabling the transfer of black-body radiation from the hot to the cold reservoir. Our device utilizes a superconducting Josephson field-effect transistor to achieve magnetic-field-free gate-tunable regulation of heat currents within the circuit. While prior studies have indicated the potential for electrostatic modulation of thermal transport properties, our framework demonstrates a temperature modulation of up to $\sim 45$ mK, exceeding prior findings by more than an order of magnitude. Furthermore, it proves a thermal transimpedance of $\sim 20$ mK/V at a bath temperature of $30$ mK. The development of such systems holds substantial promise for advancing heat management and routing in quantum chips and radiation sensors, as it enables precise nonlocal control of heat flow towards a designated structure, even when the heat source is distant and non-galvanically coupled.

cond-mat.mes-hall↗

arXiv2025

Phonon interference effects in GaAs-GaP superlattice nanowires

Fine-tuning the functional properties of nanomaterials is crucial for technological applications. Superlattices, characterized by periodic repetitions of two or more materials in different dimensions, have emerged as a promising area of investigation. We present a study of the phonon interference effect on thermal transport in GaAs-GaP superlattice nanowires with sharp interfaces between the GaAs and GaP layers, as confirmed by high-resolution transmission electron microscopy. We performed thermal conductivity measurements using the so-called thermal bridge method on superlattice nanowires with a period varying from 4.8 to 23.3 nm. The measurements showed a minimum of the thermal conductivity as a function of superlattice period up to room temperature, that we interpreted as an indication of the crossover from coherent to incoherent thermal transport. Notably, this effect is not destroyed by surface boundary or by phonon-phonon scattering, as the crossover trend is also observed at room temperature. Our results were corroborated by both ab initio lattice dynamics and semiclassical nonequilibrium molecular dynamics calculations. These findings provide insights into the wave-like and particle-like transport of phonons in superlattice nanowires and demonstrate the potential for engineering thermal properties through precise control of the superlattice structure.

cond-mat.mes-hall↗

arXiv2025

The Ferroelectric Superconducting Field Effect Transistor

The ferroelectric field-effect transistor (Fe-FET) is a three-terminal semiconducting device first introduced in the 1950s. Despite its potential, a significant boost in Fe-FET research occurred about ten years ago with the discovery of ferroelectricity in hafnium oxide. This material has been incorporated into electronic processes since the mid-2000s. Here, we observed ferroelectricity in a superconducting Josephson FET (Fe-JoFET) operating at cryogenic temperatures below 1 Kelvin. The Fe-JoFET was fabricated on the InAsOI platform, which features an InAs epilayer hosted by an electrical insulating substrate, using HfO2 as the gate insulator, making it a promising candidate due to its ferroelectric properties. The Fe-JoFET exhibits significant hysteresis in the switching current and normal-state resistance transfer characteristics, which depend on the range of gate voltages. This phenomenon opens a new research area exploring the interaction between ferroelectricity and superconductivity in hybrid superconducting-semiconducting systems, with potential applications in cryogenic data storage and computation. Supporting this, the Fe-JoFET was operated as a cryogenic superconducting single memory cell, exhibiting both dissipative and non-dissipative states. Its non-volatility was tested over a 24-hour measurement period. We also demonstrated that the Fe-JoFET can retain information at temperatures above the superconductor critical temperature, resulting in a temperature-fault-tolerant memory cell resistant to temperature oscillations or, in the worst case, cryostat faults.

cond-mat.supr-con↗

arXiv2025

Supercurrent modulation in InSb nanoflag-based Josephson junctions by scanning gate microscopy

InSb nanoflags represent an interesting platform for quantum transport and have recently been exploited in the study of hybrid planar Josephson junctions. Due to the uncovered semiconductor surface, they are also good candidates for surface probe techniques. Here, we report the first Scanning Gate Microscopy (SGM) experiments on Nb-contacted InSb nanoflag-based Josephson junctions. In the normal state, sizable conductance modulation via the charged tip of the SGM is recorded. In the superconducting state, we report the first application of Scanning Gate Microscopy to superconducting weak links, demonstrating the possibility of manipulating the supercurrent flow across a semiconductor-superconductor heterostructure at a local level. The experimental findings are consistent with theoretical predictions and establish a new way of investigating the behavior of superconducting weak links, towards the local imaging of supercurrent flow.

cond-mat.supr-con↗

arXiv2025

Novel structures of Gallenene intercalated in epitaxial Graphene

The creation of atomically thin layers of non-exfoliable materials remains a crucial challenge, requiring the development of innovative techniques. Here, confinement epitaxy is exploited to realize two-dimensional gallium via intercalation in epitaxial graphene grown on silicon carbide. Novel superstructures arising from the interaction of gallenene (a monolayer of gallium) with graphene and the silicon carbide substrate are investigated. The coexistence of different gallenene phases, including b010-gallenene and the elusive high-pressure Ga(III) phase, is identified. This work sheds new light on the formation of two-dimensional gallium and provides a platform for investigating the exotic electronic and optical properties of confined gallenene.

cond-mat.mtrl-sci↗

arXiv2025

Superconducting Quantum Interference Devices based on InSb nanoflag Josephson junctions

Planar Josephson junctions (JJs) based on InSb nanoflags have recently emerged as an intriguing platform in superconducting electronics. This letter presents the fabrication and investigation of superconducting quantum interference devices (SQUIDs) employing InSb nanoflag JJs. We provide measurements of interference patterns in both symmetric and asymmetric geometries. The interference patterns in both configurations can be modulated by a back-gate voltage, a feature well reproduced through numerical simulations. The observed behavior aligns with the skewed current-phase relations of the JJs, demonstrating significant contributions from higher harmonics. We explore the magnetic field response of the devices across a wide range of fields ($\pm 30$ mT), up to the single-junction interference regime, where a Fraunhofer-like pattern is detected. Finally, we assess the flux-to-voltage sensitivity of the SQUIDs to evaluate their performance as magnetometers. A magnetic flux noise of $S^{1/2}_\Phi = 4.4 \times 10^{-6} \Phi_0 / \sqrt{Hz}$ is identified, indicating potential applications in nanoscale magnetometry.

cond-mat.mes-hall↗

arXiv2025

Collapse of edge reconstruction in compressible Quantum Hall fluid within filling fraction range 2/3 to 1

The edge structure of a gate-defined compressible quantum Hall fluids in the filling fraction range 2/3 to 1 is studied using the three reconstructed $e^2/3h$ fractional edge modes of unity filling integer quantum Hall state. We find that the individually excited partially resolved $e^2/3h$ edge modes of the bulk state equilibrate completely even at higher magnetic field when passing through the gate defined compressible fluid with filling between 2/3 and 1. This result is unexpected because edge reconstruction at the smooth boundary is generally expected due to dominant incompressibility at filling 2/3 and 1/3. Recently such reconstructed edge mode has been reported for the compressible fluid in the filling fraction range 1/3 to 2/3. In contrary, equilibration of fractional edge modes in the compressible fluid within the filling fraction range 2/3 to 1 becomes faster with increasing magnetic field. This anomalous results will stimulate further investigations on edge structure in these complex many body systems.

cond-mat.mes-hall↗

arXiv2025

Structural and Transport Properties of Thin InAs Layers Grown on InxAl1-xAs Metamorphic Buffers

Indium Arsenide is a III-V semiconductor with low electron effective mass, a small band gap, strong spin-orbit coupling, and a large g-factor. These properties and its surface Fermi level pinned in the conduction band make InAs a good candidate for developing superconducting solid-state quantum devices. Here, we report the epitaxial growth of very thin InAs layers with thicknesses ranging from 12.5 nm to 500 nm grown by Molecular Beam Epitaxy on InxAl1-xAs metamorphic buffers. Differently than InAs substrates, these buffers have the advantage of being insulating at cryogenic temperatures, which allows for multiple device operations on the same wafer and thus making the approach scalable. The structural properties of the InAs layers were investigated by high-resolution X-ray diffraction, demonstrating the high crystal quality of the InAs layers. Furthermore, their transport properties, such as total and sheet carrier concentration, sheet resistance, and carrier mobility, were measured in the van der Pauw configuration at room temperature. A simple conduction model was employed to quantify the surface, bulk, and interface contributions to the overall carrier concentration and mobility.

cond-mat.mes-hall↗

arXiv2025

InAs on Insulator: A New Platform for Cryogenic Hybrid Superconducting Electronics

Superconducting circuits based on hybrid InAs Josephson Junctions (JJs) play a starring role in the design of fast and ultra-low power consumption solid-state quantum electronics and exploring novel physical phenomena. Conventionally, 3D substrates, 2D quantum wells (QWs), and 1D nanowires (NWs) made of InAs are employed to create superconducting circuits with hybrid JJs. Each platform has its advantages and disadvantages. Here, we proposed the InAs-on-insulator (InAsOI) as a groundbreaking platform for developing superconducting electronics. An epilayer of semiconducting InAs with different electron densities was grown onto an InAlAs metamorphic buffer layer, efficiently used as a cryogenic insulator to decouple adjacent devices electrically. JJs with various lengths and widths were fabricated employing Al as a superconductor and InAs with different electron densities. We achieved a switching current density of 7.3 uA/um, a critical voltage of 50-to-80 uV, and a critical temperature equal to that of the superconductor used. For all the JJs, the switching current follows a characteristic Fraunhofer pattern with an out-of-plane magnetic field. These achievements enable the use of InAsOI to design and fabricate surface-exposed Josephson Field Effect Transistors with high critical current densities and superior gating properties.

cond-mat.supr-con↗

arXiv2024

InAs Nanowire-Based Twin Electrical Sensors enabling Simultaneous Gas Detection Measurements: Nanodevice Engineering, Testing and Signal Fluctuation Analysis

Epitaxially grown InAs NWs are relevant for electrical sensing applications due to Fermi level pinning at NW surface, thus very sensitive to surrounding environment. While a single NW growth batch consists of millions virtually identical replicas of the same NW, real samples display subtle differences in NW size, shape, structure which may affect the detection performance. Here, electrical gas detection is investigated the in two NW-based nominally identical or twin devices fabricated starting from the same NW growth batch. Two individual wurtzite InAs NWs are placed onto a fabrication substrate at 2 micrometers distance with 90 degrees relative orientation, each NW is electrically contacted, and the nanodevices are exposed to humidity and NO$_2$ flux diluted in synthetic air. Electrical signal versus time is measured simultaneously in each nanodevice, upon different gases and concentrations. Observed detection limit is 2 ppm for NO$_2$, 20% for relative humidity. Correlation analysis method is exploited by calculating auto- and cross-correlation functions for the experimental signal pairs, indicating lack of cross-correlation in the signal noise of the two nanodevices, suggesting that signal differences could be ascribed mainly to nonidealities of fabrication protocol and nanoscopic differences in the two nanostructures, rather than different environmental conditions.

cond-mat.mes-hall↗

arXiv2024

Josephson Field Effect Transistors with InAs on Insulator and High Permittivity Gate Dielectrics

InAs on Insulator (InAsOI) has been recently demonstrated as a promising platform to develop hybrid semiconducting-superconducting Josephson Junctions (JJs) and Josephson Field Effect Transistors (JoFETs). The InAsOI consists of an InAs epilayer grown onto a cryogenic-electrically-insulating InAlAs metamorphic buffer, which allows the electrical decoupling of surface-exposed adjacent devices together with a high critical current density integration. The miniaturization of Si microchips has progressed significantly due to the integration of high permittivity (high-k) gate insulators, allowing an increased gate coupling with the transistor channel with consequent reduced gate operating voltages and leakages. As well as for Si-based FETs, integrating high-k gate insulators with JoFETs promises similar advantages in superconducting electronics. Here, we investigate the gate-tunable electrical properties of InAsOI-based JoFETs featuring different high-k gate insulators, namely, HfO2 and Al2O3. We found that both the ungated and gate-tunable electrical properties of the JoFETs are strongly dependent on the insulator chosen. With both dielectrics, the JoFETs can entirely suppress the switching current and increase the normal state resistance by 10-20 times using negative gate voltages. The HfO2-JoFETs exhibit improved gate-tunable electrical performance compared to those achieved with Al2O3-JoFETs, which is related to the higher permittivity of the insulator. Gate-dependent electrical properties of InAsOI-based JoFETs were evaluated in the temperature range from 50 mK to 1 K. Moreover, under the influence of an out-of-plane magnetic field, JoFETs exhibited an unconventional Fraunhofer diffraction pattern, from which an edge-peaked supercurrent density distribution was calculated.

cond-mat.supr-con↗

arXiv2024

Extremely weak sub-kelvin electron-phonon coupling in InAs On Insulator

We are proposing, as an ideal candidate for caloritronic devices operating at subKelvin temperatures, a hybrid superconductor-semiconductor platform named InAs on insulator (InAsOI). This heterostructure is made by doped InAs grown on an insulating buffer of InAlAs on a GaAs substrate. Caloritronic devices aim to heat or cool electrons out of equilibrium with respect to the phonon degree of freedom. However, their performances are usually limited by the strength of the electron-phonon (e-ph) coupling and the associated power loss. Our work discusses the advantages of the InAsOI platform, which are based on the significantly low e-ph coupling measured compared to all-metallic state-of-the-art caloritronic devices. Our structure demonstrates values of the e-ph coupling constant up to two orders of magnitude smaller than typical values in metallic structures.

cond-mat.supr-con↗

arXiv2024

Edge reconstruction of compressible Quantum Hall fluid in the filling fraction range 1/3 to 2/3

Edge reconstruction of gate-tunable compressible quantum Hall fluids in the filling fraction range 1/3 to 2/3 is studied by measuring transmitted conductance of two individually excited fractional $e^2/3h$ edge modes of bulk 2/3 fractional quantum Hall fluid. Our findings reveal that the measured transmitted conductance deviates from the fully equilibrated value for the filling fraction range 1/3 to 2/3 of the gate-tunable compressible quantum Hall fluids at higher magnetic fields. This observation suggests that at the boundary of the compressible fluid a reconstructed $e^2/3h$ fractional edge mode is present and the mode does not completely equilibrate with the inner dissipative bulk region. Consequently, this outer reconstructed edge mode supports adiabatic charge transport, allowing non-equilibrated current transport through the compressible region. These studies open new avenues for achieving robust fractional edge modes even in compressible quantum Hall fluids under strong magnetic fields, enhancing our understanding of edge state dynamics in these complex systems.

cond-mat.mes-hall↗

arXiv2024

Side-gate modulation of supercurrent in InSb nanoflag-based Josephson junctions

InSb nanoflags, due to their intrinsic spin-orbit interactions, are an interesting platform in the study of planar Josephson junctions. Ballistic transport, combined with high transparency of the superconductor/semiconductor interfaces, was reported to lead to interesting phenomena such as the Josephson diode effect. The versatility offered by the planar geometry can be exploited to manipulate both carrier concentration and spin-orbit strength by electrical means. Here we present experimental results on InSb nanoflag-based Josephson junctions fabricated with side-gates placed in close proximity to the junction. We show that side-gates can efficiently modulate the current through the junction, both in the dissipative and in the dissipation-less regimes, similarly to what obtained with a conventional back-gate. Furthermore, the side-gates can be used to influence the Fraunhofer interference pattern induced by the presence of an external out-of-plane magnetic field.

cond-mat.supr-con↗