arXiv subjects

Luciano Rodriguez

Publications and source records attributed to Luciano Rodriguez.

At least 19 recordsLinked to original sources

arXiv2025

A multi-viewpoint comparison of the velocity field of coronal propagating disturbances

Small-scale propagating disturbances (PD) are ubiquitous in the solar corona. Time-Normalised Optical Flow (TNOF) is a method developed for mapping PD velocity fields in time series of Extreme-Ultraviolet (EUV) images. We show PD velocity fields of a quiet Sun (QS) region containing a small coronal hole (CH) and filament channel (FC) jointly observed by Extreme Ultraviolet Imager (EUI) aboard the Solar Orbiter and Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO). The QS observations acquired on 28 October 2023 in 174A channel of High Resolution EUV Imager (HRIEUV) of EUI and 171A channel of AIA are used. During the time of the observations, the separation angle between Solar Orbiter and SDO was approximately 26\de. A novel image alignment analysis shows that the dominant formation heights are 11.4Mm for HRIEUV and 4Mm for AIA. Despite this height difference, the PD velocity fields obtained from the observations from the two instruments are in good agreement across the region. In the QS the median PD speed is around 6.7 and 7.4\kms\ for HRIEUV and AIA respectively, with maximum speeds of around 40\kms. The small equatorial CH is a region dominated by a low temperature of $\approx$0.8MK and is host to high PD speeds, with a median speed of 17\kms. The velocity field bridges coherently across the CH from neighbouring QS regions from east to west, thus the CH must be overlaid by a system of long, low-lying closed magnetic loops. This unexpected configuration is supported by a potential field (PF) magnetic model and may be due to the longevity of the CH, allowing time for interchange reconnection with neighbouring closed-field regions. The FC is observed to be multithermal, with a narrow central strip of high emission at both low (0.8MK) and high (2.5MK) temperatures and low emission at warm (1.2MK) temperature. The FC has PD speeds similar to those of the QS.

astro-ph.SR↗

arXiv2025

Coronal electron density: Insights from radio and in situ observations, and EUHFORIA modeling

The distribution of the coronal electron density at different distances from the Sun strongly influences the physical processes in the solar corona and is therefore a very important topic in solar physics. Most methods, including radio observations, used for estimating coronal electron density were not fully validated due to the absence of in situ observations closer to the Sun. Consequently, space weather forecasting models that simulate coronal density lacked proper validation. Newly available PSP in situ observations at distances close to the Sun provide an opportunity to study plasma properties near the Sun and to compare observational and modeling results. This work studies type III bursts, estimates their propagation path, and validates coronal electron density obtained from radio, in situ observations, and modeling with EUHFORIA. Type III bursts observed during the second PSP perihelion are analyzed using radio triangulation and modeling. We determine 3D positions of radio sources and use EUHFORIA to estimate electron densities at various locations. The electron densities derived from radio observations and EUHFORIA modeling are inter-validated with in situ PSP measurements. We studied 11 type III bursts during the second PSP perihelion, with radio triangulation showing propagation paths southward from the solar ecliptic plane. Radio source sizes ranged from 0.5 to 40 deg (0.5 to 25 Rs) with no clear frequency dependence, indicating that scattering of radio waves was not very significant. Comparison of electron densities from radio triangulation, PSP data, and EUHFORIA modeling showed a large range of values, influenced by different propagation paths and model limitations. Despite these variations, EUHFORIA identified high-density regions along type III burst paths.

astro-ph.SR↗

arXiv2024

Cannibals in PARADISE: The effect of merging interplanetary shocks on solar energetic particle events

Gradual solar energetic particle (SEP) events are associated with shocks driven by coronal mass ejections (CMEs). The merging of two CMEs (so-called Cannibalistic CMEs) and the interaction of their associated shocks, has been linked to some of the most powerful solar storms ever recorded. Multiple studies have focused on the observational aspects of these SEP events, yet only a handful have focused on modeling similar CME-CME interactions in the heliosphere using advanced magnetohydrodynamic (MHD) models. This work presents, to our knowledge, the first modeling results of a fully time-dependent 3D simulation that captures both the interaction of two CMEs and its effect on the acceleration and transport of SEPs. This is achieved by using an MHD model for the solar wind and CME propagation together with an integrated SEP model. We perform different simulations and compare the behavior of the energetic protons in three different solar wind environments, where a combination of two SEP-accelerating CMEs are modeled. We find that particle acceleration is significantly affected by the presence of both CMEs in the simulation. Initially, less efficient acceleration results in lower energy particles. However, as the CMEs converge and their shocks eventually merge, particle acceleration is significantly enhanced through multiple acceleration processes between CME-driven shocks, resulting in higher particle intensities and energy levels.

astro-ph.SR↗

arXiv2024

Calibrating the WSA model in EUHFORIA based on PSP observations

We employ Parker Solar Probe (PSP) observations during the latest solar minimum period (years 2018 -2021) to calibrate the version of the Wang-Sheeley-Arge (WSA) coronal model used in the European space weather forecasting tool EUHFORIA. WSA provides a set of boundary conditions at 0.1 au necessary to initiate the heliospheric part of EUHFORIA, namely, the domain extending beyond the solar Alfvenic point. To calibrate WSA, we observationally constrain four constants in the WSA semi-empirical formula based on PSP observations. We show how the updated (after the calibration) WSA boundary conditions at 0.1 au are compared to PSP observations at similar distances, and we further propagate these conditions in the heliosphere according to EUHFORIAs magnetohydrodynamic (MHD) approach. We assess the predictions at Earth based on the Dynamic Time Warping technique. Our findings suggest that, for the period of interest, the WSA configurations which resembled optimally the PSP observations close to the Sun, were different than the ones needed to provide better predictions at Earth. One reason for this discrepancy can be attributed to the scarcity of fast solar wind velocities recorded by PSP. The calibration of the model was performed based on unexpectedly slow velocities that did not allow us to achieve generally and globally improved solar wind predictions, compared to older studies. Other reasons can be attributed to missing physical processes from the heliospheric part of EUHFORIA but also the fact that the currently employed WSA relationship, as coupled to the heliospheric MHD domain, may need a global reformulation beyond that of just updating the four constant factors that were taken into account in this study.

astro-ph.SR↗

arXiv2024

On the Mesoscale Structure of CMEs at Mercury's Orbit: BepiColombo and Parker Solar Probe Observations

On 2022 February 15, an impressive filament eruption was observed off the solar eastern limb from three remote-sensing viewpoints, namely Earth, STEREO-A, and Solar Orbiter. In addition to representing the most-distant observed filament at extreme ultraviolet wavelengths -- captured by Solar Orbiter's field of view extending to above 6 $R_{\odot}$ -- this event was also associated with the release of a fast ($\sim$2200 km$\cdot$s$^{-1}$) coronal mass ejection (CME) that was directed towards BepiColombo and Parker Solar Probe. These two probes were separated by 2$^{\circ}$ in latitude, 4$^{\circ}$ in longitude, and 0.03 au in radial distance around the time of the CME-driven shock arrival in situ. The relative proximity of the two probes to each other and to the Sun ($\sim$0.35 au) allows us to study the mesoscale structure of CMEs at Mercury's orbit for the first time. We analyse similarities and differences in the main CME-related structures measured at the two locations, namely the interplanetary shock, the sheath region, and the magnetic ejecta. We find that, despite the separation between the two spacecraft being well within the typical uncertainties associated with determination of CME geometric parameters from remote-sensing observations, the two sets of in-situ measurements display some profound differences that make understanding of the overall 3D CME structure particularly challenging. Finally, we discuss our findings within the context of space weather at Mercury's distances and in terms of the need to investigate solar transients via spacecraft constellations with small separations, which has been gaining significant attention during recent years.

astro-ph.SR↗

arXiv2023

Evolution of dynamic fibrils from the cooler chromosphere to the hotter corona

Dynamic fibrils (DFs) are commonly observed chromospheric features in solar active regions. Recent observations from the Extreme Ultraviolet Imager (EUI) aboard the Solar Orbiter have revealed unambiguous signatures of DFs at the coronal base, in extreme ultraviolet (EUV) emission. However, it remains unclear if the DFs detected in the EUV are linked to their chromospheric counterparts. Simultaneous detection of DFs from chromospheric to coronal temperatures could provide important information on their thermal structuring and evolution through the solar atmosphere. In this paper, we address this question by using coordinated EUV observations from the Atmospheric Imaging Assembly (AIA), Interface Region Imaging Spectrograph (IRIS), and EUI to establish a one-to-one correspondence between chromospheric and transition region DFs (observed by IRIS) with their coronal counterparts (observed by EUI and AIA). Our analysis confirms a close correspondence between DFs observed at different atmospheric layers, and reveals that DFs can reach temperatures of about 1.5 million Kelvin, typical of the coronal base in active regions. Furthermore, intensity evolution of these DFs, as measured by tracking them over time, reveals a shock-driven scenario in which plasma piles up near the tips of these DFs and, subsequently, these tips appear as bright blobs in coronal images. These findings provide information on the thermal structuring of DFs and their evolution and impact through the solar atmosphere.

astro-ph.SR↗

arXiv2023

Slow Solar Wind Connection Science during Solar Orbiter's First Close Perihelion Passage

The Slow Solar Wind Connection Solar Orbiter Observing Plan (Slow Wind SOOP) was developed to utilise the extensive suite of remote sensing and in situ instruments on board the ESA/NASA Solar Orbiter mission to answer significant outstanding questions regarding the origin and formation of the slow solar wind. The Slow Wind SOOP was designed to link remote sensing and in situ measurements of slow wind originating at open-closed field boundaries. The SOOP ran just prior to Solar Orbiter's first close perihelion passage during two remote sensing windows (RSW1 and RSW2) between 2022 March 3-6 and 2022 March 17-22, while Solar Orbiter was at a heliocentric distance of 0.55-0.51 and 0.38-0.34 au from the Sun, respectively. Coordinated observation campaigns were also conducted by Hinode and IRIS. The magnetic connectivity tool was used, along with low latency in situ data, and full-disk remote sensing observations, to guide the target pointing of Solar Orbiter. Solar Orbiter targeted an active region complex during RSW1, the boundary of a coronal hole, and the periphery of a decayed active region during RSW2. Post-observation analysis using the magnetic connectivity tool along with in situ measurements from MAG and SWA/PAS, show that slow solar wind, with velocities between 210 and 600 km/s, arrived at the spacecraft originating from two out of the three of the target regions. The Slow Wind SOOP, despite presenting many challenges, was very successful, providing a blueprint for planning future observation campaigns that rely on the magnetic connectivity of Solar Orbiter.

astro-ph.SR↗

arXiv2023

Slow solar wind sources. High-resolution observations with a quadrature view

The origin of the slow solar wind is still an open issue. One possibility that has been suggested is that upflows at the edge of an active region can contribute to the slow solar wind. We aim to explain how the plasma upflows are generated, which mechanisms are responsible for them, and what the upflow region topology looks like. We investigated an upflow region using imaging data with the unprecedented temporal (3s) and spatial (2 pixels = 236km) resolution that were obtained on 30 March 2022 with the 174{\AA} of the Extreme-Ultraviolet Imager (EUI)/High Resolution Imager (HRI) on board Solar Orbiter. During this time, the EUI and Earth-orbiting satellites (Solar Dynamics Observatory, Hinode, and the Interface Region Imaging Spectrograph, IRIS) were located in quadrature (92 degrees), which provides a stereoscopic view with high resolution. We used the Hinode/EIS (Fe XII) spectroscopic data to find coronal upflow regions in the active region. The IRIS slit-jaw imager provides a high-resolution view of the transition region and chromosphere. For the first time, we have data that provide a quadrature view of a coronal upflow region with high spatial resolution. We found extended loops rooted in a coronal upflow region. Plasma upflows at the footpoints of extended loops determined spectroscopically through the Doppler shift are similar to the apparent upward motions seen through imaging in quadrature. The dynamics of small-scale structures in the upflow region can be used to identify two mechanisms of the plasma upflow: Mechanism I is reconnection of the hot coronal loops with open magnetic field lines in the solar corona, and mechanism II is reconnection of the small chromospheric loops with open magnetic field lines in the chromosphere or transition region. We identified the locations in which mechanisms I and II work.

astro-ph.SR↗

arXiv2022

Signatures of dynamic fibrils at the coronal base: Observations from Solar Orbiter/EUI

The solar chromosphere hosts a wide variety of transients, including dynamic fibrils (DFs) that are characterised as elongated, jet-like features seen in active regions, often through H$\alpha$ diagnostics. So far, these features have been difficult to identify in coronal images primarily due to their small size and the lower spatial resolution of the current EUV imagers. Here we present the first unambiguous signatures of DFs in coronal EUV data using high-resolution images from the Extreme Ultraviolet Imager (EUI) on board Solar Orbiter. Using the data acquired with the 174~{\AA} High Resolution Imager (HRI$_{EUV}$) of EUI, we find many bright dot-like features (of size 0.3-0.5 Mm) that move up and down (often repeatedly) in the core of an active region. In a space-time map, these features produce parabolic tracks akin to the chromospheric observations of DFs. Properties such as their speeds (14 km~s$^{-1}$), lifetime (332~s), deceleration (82 m~s$^{-2}$) and lengths (1293~km) are also reminiscent of the chromospheric DFs. The EUI data strongly suggest that these EUV bright dots are basically the hot tips (of the cooler chromospheric DFs) that could not be identified unambiguously before because of a lack of spatial resolution.

astro-ph.SR↗

arXiv2022

What drives decayless kink oscillations in active region coronal loops on the Sun?

We study here the phenomena of decayless kink oscillations in a system of active region (AR) coronal loops. Using high resolution observations from two different instruments, namely the Extreme Ultraviolet Imager (EUI) on board Solar Orbiter and the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory, we follow these AR loops for an hour each on three consecutive days. Our results show significantly more resolved decayless waves in the higher-resolution EUI data compared with the AIA data. Furthermore, the same system of loops exhibits many of these decayless oscillations on Day-2, while on Day-3, we detect very few oscillations and on Day-1, we find none at all. Analysis of photospheric magnetic field data reveals that at most times, these loops were rooted in sunspots, where supergranular flows are generally absent. This suggests that supergranular flows, which are often invoked as drivers of decayless waves, are not necessarily driving such oscillations in our observations. Similarly, our findings also cast doubt on other possible drivers of these waves, such as a transient driver or mode conversion of longitudinal waves near the loop footpoints. In conclusion, through our analysis we find that none of the commonly suspected sources proposed to drive decayless oscillations in active region loops seems to be operating in this event and hence, the search for that elusive wave driver needs to continue.

astro-ph.SR↗

arXiv2022

Implementation and validation of the FRi3D flux rope model in EUHFORIA

The Flux Rope in 3D (FRi3D, Isavnin, 2016), a coronal mass ejection (CME) model with global three-dimensional (3D) geometry, has been implemented in the space weather forecasting tool EUHFORIA (Pomoell and Poedts, 2018). By incorporating this advanced flux rope model in EUHFORIA, we aim to improve the modelling of CME flank encounters and, most importantly, the magnetic field predictions at Earth. After using synthetic events to showcase FRi3D's capabilities of modelling CME flanks, we optimize the model to run robust simulations of real events and test its predictive capabilities. We perform observation-based modelling of the halo CME event that erupted on 12 July 2012. The geometrical input parameters are constrained using the forward modelling tool included in FRi3D with additional flux rope geometry flexibilities as compared to the pre-existing models. The magnetic field input parameters are derived using the differential evolution algorithm to fit FRi3D parameters to the in situ data at 1 AU. An observation-based approach to constrain the density of CMEs is adopted, in order to achieve a better estimation of mass corresponding to the FRi3D geometry. The CME is evolved in EUHFORIA's heliospheric domain and a comparison of FRi3D's predictive performance with the previously implemented spheromak CME in EUHFORIA is presented. For this event, FRi3D improves the modelling of the total magnetic field magnitude and Bz at Earth by ~30% and ~70%, respectively. Moreover, we compute the expected geoeffectiveness of the storm at Earth using an empirical Dst model and find that the FRi3D model improves the predictions of minimum Dst by ~20% as compared to the spheromak CME model. Finally, we discuss the limitations of the current implementation of FRi3D in EUHFORIA and propose possible improvements.

astro-ph.SR↗

arXiv2022

Observation of Magnetic Switchback in the Solar Corona

Switchbacks are sudden, large radial deflections of the solar wind magnetic field, widely revealed in interplanetary space by the Parker Solar Probe. The switchbacks' formation mechanism and sources are still unresolved, although candidate mechanisms include Alfv\'enic turbulence, shear-driven Kelvin-Helmholtz instabilities, interchange reconnection, and geometrical effects related to the Parker spiral. This Letter presents observations from the Metis coronagraph onboard Solar Orbiter of a single large propagating S-shaped vortex, interpreted as first evidence of a switchback in the solar corona. It originated above an active region with the related loop system bounded by open-field regions to the East and West. Observations, modeling, and theory provide strong arguments in favor of the interchange reconnection origin of switchbacks. Metis measurements suggest that the initiation of the switchback may also be an indicator of the origin of slow solar wind.

astro-ph.SR↗

arXiv2022

Influence of coronal hole morphology on the solar wind speed at Earth

It has long been known that the high-speed stream (HSS) peak velocity at Earth directly depends on the area of the coronal hole (CH) on the Sun. Different degrees of association between the two parameters have been shown by many authors. In this study, we revisit this association in greater detail for a sample of 45 nonpolar CHs during the minimum phase of solar cycle 24. The aim is to understand how CHs of different properties influence the HSS peak speeds observed at Earth and draw from this to improve solar wind modeling. The characteristics of the CHs of our sample were extracted based on the Collection of Analysis Tools for Coronal Holes (CATCH) which employs an intensity threshold technique applied to extreme-ultraviolet (EUV) filtergrams. We first examined all the correlations between the geometric characteristics of the CHs and the HSS peak speed and duration at Earth, for the entire sample. The CHs were then categorized in different groups based on morphological criteria, such as the aspect ratio, the orientation angle and the geometric complexity, a parameter which is often neglected when the formation of the fast solar wind at Earth is studied. Our results, confirmed also by the bootstrapping technique, show that all three aforementioned morphological criteria play a major role in determining the HSS peak speed at 1 AU. Therefore, they need to be taken into consideration for empirical models that aim to forecast the fast solar wind at Earth based on the observed CH solar sources.

astro-ph.SR↗

arXiv2021

Understanding the Origins of Problem Geomagnetic Storms Associated With "Stealth" Coronal Mass Ejections

Geomagnetic storms are an important aspect of space weather and can result in significant impacts on space- and ground-based assets. The majority of strong storms are associated with the passage of interplanetary coronal mass ejections (ICMEs) in the near-Earth environment. In many cases, these ICMEs can be traced back unambiguously to a specific coronal mass ejection (CME) and solar activity on the frontside of the Sun. Hence, predicting the arrival of ICMEs at Earth from routine observations of CMEs and solar activity currently makes a major contribution to the forecasting of geomagnetic storms. However, it is clear that some ICMEs, which may also cause enhanced geomagnetic activity, cannot be traced back to an observed CME, or, if the CME is identified, its origin may be elusive or ambiguous in coronal images. Such CMEs have been termed "stealth CMEs." In this review, we focus on these "problem" geomagnetic storms in the sense that the solar/CME precursors are enigmatic and stealthy. We start by reviewing evidence for stealth CMEs discussed in past studies. We then identify several moderate to strong geomagnetic storms (minimum Dst < -50 nT) in solar cycle 24 for which the related solar sources and/or CMEs are unclear and apparently stealthy. We discuss the solar and in situ circumstances of these events and identify several scenarios that may account for their elusive solar signatures. These range from observational limitations (e.g., a coronagraph near Earth may not detect an incoming CME if it is diffuse and not wide enough) to the possibility that there is a class of mass ejections from the Sun that have only weak or hard-to-observe coronal signatures. In particular, some of these sources are only clearly revealed by considering the evolution of coronal structures over longer time intervals than is usually considered. We also review a variety of numerical modelling approaches...

astro-ph.SR↗

arXiv2021

The Dynamic Time Warping as a Means to Assess Solar Wind Time Series

During the last decades, international attempts have been made to develop realistic space weather prediction tools aiming to forecast the conditions on the Sun and in the interplanetary environment. These efforts have led to the development of appropriate metrics in order to assess the performance of those tools. Metrics are necessary to validate models, compare different models and monitor improvements of a certain model over time. In this work, we introduce the Dynamic Time Warping (DTW) as an alternative way to evaluate the performance of models and, in particular, to quantify differences between observed and modeled solar wind time series. We present the advantages and drawbacks of this method as well as applications to WIND observations and EUHFORIA predictions at Earth. We show that DTW can warp sequences in time, aiming to align them with the minimum cost by using dynamic programming. It can be applied in two ways for the evaluation of modeled solar wind time series. The first, calculates the sequence similarity factor (SSF), a number that provides a quantification of how good the forecast is, compared to an ideal and a non-ideal prediction scenarios. The second way quantifies the time and amplitude differences between the points that are best matched between the two sequences. As a result, DTW can serve as a hybrid metric between continuous measurements (e.g., the correlation coefficient), and point-by-point comparisons. It is a promising technique for the assessment of solar wind profiles providing at once the most complete evaluation portrait of a model.

astro-ph.SR↗

arXiv2021

Exploring the radial evolution of Interplanetary Coronal Mass Ejections using EUHFORIA

Coronal Mass Ejections (CMEs) are large-scale eruptions from the Sun into interplanetary space. Despite being major space weather drivers, our knowledge of the CME properties in the inner heliosphere remains constrained by the scarcity of observations at distances other than 1 au. Furthermore, most CMEs are observed in situ by single spacecraft, requiring numerical models to complement the sparse observations available. We aim to assess the ability of the linear force-free spheromak CME model in EUHFORIA to describe the radial evolution of interplanetary CMEs, yielding new context for observational studies. We model one well-studied CME, and investigate its radial evolution by placing virtual spacecraft along the Sun-Earth line in the simulation domain. To directly compare observational and modelling results, we characterise the interplanetary CME signatures between 0.2 and 1.9 au from modelled time series, exploiting techniques traditionally employed to analyse real in situ data. Results show that the modelled radial evolution of the mean solar wind and CME values is consistent with observational and theoretical expectations. The CME expands as a consequence of the decaying pressure in the surrounding wind: the expansion is rapid within 0.4 au, and moderate at larger distances. The early rapid expansion could not explain the overestimated CME radial size in our simulation, suggesting this is an intrinsic limitation of the spheromak geometry used. The magnetic field profile indicates a relaxation of the CME during propagation, while ageing is most probably not a substantial source of magnetic asymmetry beyond 0.4 au. We also report a CME wake that is significantly shorter than suggested by observations. Overall, EUHFORIA provides a consistent description of the radial evolution of solar wind and CMEs; nevertheless, improvements are required to better reproduce the CME radial extension.

astro-ph.SR↗

arXiv2021

Implementing the MULTI-VP coronal model in EUHFORIA: test case results and comparisons with the WSA coronal model

In this study, we focus on improving EUHFORIA (European Heliospheric Forecasting Information Asset), a recently developed 3D MHD space weather prediction tool. EUHFORIA consists of two parts, covering two spatial domains; the solar corona and the inner heliosphere. For the first part, the semi-empirical Wang-Sheeley-Arge (WSA) model is used by default, which employs the Potential Field Source Surface (PFSS) and Schatten Current Sheet (SCS) models to provide the necessary solar wind plasma and magnetic conditions above the solar surface, at 0.1 AU, that serve as boundary conditions for the inner heliospheric part. Herein, we present the first results of the implementation of an alternative coronal model in EUHFORIA, the so-called MULTI-VP model. We compared the output of the default coronal model with the output from MULTI-VP at the inner boundary of the heliospheric domain of EUHFORIA in order to understand differences between the two models, before they propagate to Earth. We also compared the performance of WSA+EUHFORIA-heliosphere and MULTI-VP+EUHFORIA-heliosphere against in situ observations at Earth. In the frame of this study, we considered two different high-speed stream cases, one during a period of low solar activity and one during a period of high solar activity. We also employed two different magnetograms, i.e., GONG and WSO. Our results show that the choice of both the coronal model and the magnetogram play an important role on the accuracy of the solar wind prediction. However, it is not clear which component plays the most important role for the modeled results obtained at Earth. A statistical analysis with an appropriate number of simulations is needed to confirm our findings.

astro-ph.SR↗

arXiv2021

CME Magnetic Structure and IMF Preconditioning Affecting SEP Transport

Coronal mass ejections (CMEs) and solar energetic particles (SEPs) are two phenomena that can cause severe space weather effects throughout the heliosphere. The evolution of CMEs, especially in terms of their magnetic structure, and the configuration of the interplanetary magnetic field (IMF) that influences the transport of SEPs are currently areas of active research. These two aspects are not necessarily independent of each other, especially during solar maximum when multiple eruptive events can occur close in time. Accordingly, we present the analysis of a CME that erupted on 2012 May 11 (SOL2012-05-11) and an SEP event following an eruption that took place on 2012 May 17 (SOL2012-05-17). After observing the May 11 CME using remote-sensing data from three viewpoints, we evaluate its propagation through interplanetary space using several models. Then, we analyse in-situ measurements from five predicted impact locations (Venus, Earth, the Spitzer Space Telescope, the Mars Science Laboratory en route to Mars, and Mars) in order to search for CME signatures. We find that all in-situ locations detect signatures of an SEP event, which we trace back to the May 17 eruption. These findings suggest that the May 11 CME provided a direct magnetic connectivity for the efficient transport of SEPs. We discuss the space weather implications of CME evolution, regarding in particular its magnetic structure, and CME-driven IMF preconditioning that facilitates SEP transport. Finally, this work remarks the importance of using data from multiple spacecraft, even those that do not include space weather research as their primary objective.

astro-ph.SR↗