SearcharxivSearch

arXiv subjects

Lucio Piccirillo

Publications and source records attributed to Lucio Piccirillo.

At least 19 recordsLinked to original sources

Constraints on the polarization angle oscillations of the Crab Nebula with the Simons Array and its applications to the search for axion-like particles

We present a search for polarization oscillation of the Crab Nebula, also known as Tau A, at millimeter wavelengths using observations with the Simons Array, the successor experiment to POLARBEAR. We follow up on previous work by POLARBEAR using 90 GHz band data of the 2023 observing season of the Simons Array to evaluate the variability of Tau A's polarization angle. Tau A is widely used as a polarization angle calibration source in millimeter-wave astronomy, and thus it is necessary to validate the stability. Additionally, an interesting application of the time-resolved polarimetry of Tau A is to search for axion-like particles (ALPs). We do not detect a global signal across the frequencies considered in this analysis and place a median 95% upper bound of polarization oscillation amplitude $A<0.12^{\circ}$ over oscillation frequencies from 3.39 year$^{-1}$ to 1.50 day$^{-1}$. This constrains the ALP-photon coupling at a median 95% upper bound of $g_{a\gamma\gamma}< 3.84\times 10^{-12}\times\left(m_a/10^{-21}\,\mathrm{eV}\right)$ in the mass range from $4.4\times10^{-22}$ to $7.2\times10^{-20}$ eV, assuming the ALP constitutes all of dark matter, its field is a stochastic Gaussian field, and it is the sole source of Tau A's polarization angle oscillation. Additionally, we do not detect signal at the frequencies where 2.5$\sigma$ hints were previously reported by POLARBEAR, but we do not exclude these signals at the 95% confidence level.

astro-ph.CO

A measurement of atmospheric circular polarization with POLARBEAR

At millimeter wavelengths, the atmospheric emission is circularly polarized owing to the Zeeman splitting of molecular oxygen by the Earth's magnetic field. We report a measurement of the signal in the 150 GHz band using 3 years of observational data with the \textsc{Polarbear} project. Non-idealities of a continuously rotating half-wave plate (HWP) partially convert circularly polarized light to linearly polarized light. While \textsc{Polarbear} detectors are sensitive to linear polarization, this effect makes them sensitive to circular polarization. Although this was not the intended use, we utilized this conversion to measure circular polarization. We reconstruct the azimuthal gradient of the circular polarization signal and measure its dependency from the scanning direction and the detector bandpass. We compare the signal with a simulation based on atmospheric emission theory, the detector bandpass, and the HWP leakage spectrum model. We find the ratio of the observed azimuthal slope to the simulated slope is $0.92 \pm 0.01\rm{(stat)} \pm 0.07\rm{(sys)}$. This ratio corresponds to a brightness temperature of $3.8\,\mathrm{m K}$ at the effective band center of $121.8\,\mathrm{GHz}$ and bandwidth of $3.5\,\mathrm{GHz}$ estimated from representative detector bandpass and the spectrum of Zeeman emission. This result validates our understanding of the instrument and reinforces the feasibility of measuring the circular polarization using the imperfection of continuously rotating HWP. Continuously rotating HWP is popular in ongoing and future cosmic microwave background experiments to modulate the polarized signal. This work shows a method for signal extraction and leakage subtraction that can help measuring circular polarization in such experiments.

astro-ph.IM

Exploration of the polarization angle variability of the Crab Nebula with POLARBEAR and its application to the search for axion-like particles

The Crab Nebula, also known as Tau A, is a polarized astronomical source at millimeter wavelengths. It has been used as a stable light source for polarization angle calibration in millimeter-wave astronomy. However, it is known that its intensity and polarization vary as a function of time at a variety of wavelengths. Thus, it is of interest to verify the stability of the millimeter-wave polarization. If detected, polarization variability may be used to better understand the dynamics of Tau~A, and for understanding the validity of Tau~A as a calibrator. One intriguing application of such observation is to use it for the search of axion-like particles (ALPs). Ultralight ALPs couple to photons through a Chern-Simons term, and induce a temporal oscillation in the polarization angle of linearly polarized sources. After assessing a number of systematic errors and testing for internal consistency, we evaluate the variability of the polarization angle of the Crab Nebula using 2015 and 2016 observations with the 150 GHz POLARBEAR instrument. We place a median 95% upper bound of polarization oscillation amplitude $A < 0.065^\circ$ over the oscillation frequencies from $0.75~\mathrm{year}^{-1}$ to $0.66~\mathrm{hour}^{-1}$. Assuming that no sources other than ALP are causing Tau A's polarization angle variation, that the ALP constitutes all the dark matter, and that the ALP field is a stochastic Gaussian field, this bound translates into a median 95% upper bound of ALP-photon coupling $g_{a\gamma\gamma} < 2.16\times10^{-12}\,\mathrm{GeV}^{-1}\times(m_a/10^{-21} \mathrm{eV})$ in the mass range from $9.9\times10^{-23} \mathrm{eV}$ to $7.7\times10^{-19} \mathrm{eV}$. This demonstrates that this type of analysis using bright polarized sources is as competitive as those using the polarization of cosmic microwave background in constraining ALPs.

astro-ph.CO

The Impact of Surface Passivation on Kapitza Resistance at the Interface between a Semiconductor and Liquid Nitrogen

Cooling electronic devices to cryogenic temperatures (< 77 K) is crucial in various scientific and engineering domains. Efficient cooling involves the removal of heat generated from these devices through thermal contact with either a liquid cryogen or a dry cryostat cold stage. However, as these devices cool, thermal boundary resistance, also known as Kapitza resistance, hinders the heat flow across thermal interfaces, resulting in elevated device temperatures. In transistors, the presence of passivation layers like Silicon Nitride (SiN) introduces additional interfaces that further impede heat dissipation. This paper investigates the impact of passivation layer thickness on Kapitza resistance at the interface between a solid device and liquid nitrogen. The Kapitza resistance is measured using a capacitance thermometer that has been passivated with SiN layers ranging from 0 to 240 nm. We observe that Kapitza resistance increases with increasing passivation thickness.

physics.ins-det

QUIJOTE scientific results -- XIII. Intensity and polarization study of supernova remnants in the QUIJOTE-MFI wide survey: CTB 80, Cygnus Loop, HB 21, CTA 1, Tycho and HB 9

We use the new QUIJOTE-MFI wide survey (11, 13, 17 and 19 GHz) to produce spectral energy distributions (SEDs), on an angular scale of 1 deg, of the supernova remnants (SNRs) CTB 80, Cygnus Loop, HB 21, CTA 1, Tycho and HB 9. We provide new measurements of the polarized synchrotron radiation in the microwave range. For each SNR, the intensity and polarization SEDs are obtained and modelled by combining QUIJOTE-MFI maps with ancillary data. In intensity, we confirm the curved power law spectra of CTB 80 and HB 21 with a break frequency $ν_{\rm b}$ at 2.0$^{+1.2}_{-0.5}$ GHz and 5.0$^{+1.2}_{-1.0}$ GHz respectively; and spectral indices respectively below and above the spectral break of $-0.34\pm0.04$ and $-0.86\pm0.5$ for CTB 80, and $-0.24\pm0.07$ and $-0.60\pm0.05$ for HB 21. In addition, we provide upper limits on the Anomalous Microwave Emission (AME), suggesting that the AME contribution is negligible towards these remnants. From a simultaneous intensity and polarization fit, we recover synchrotron spectral indices as flat as $-0.24$, and the whole sample has a mean and scatter of $-0.44\pm0.12$. The polarization fractions have a mean and scatter of $6.1\pm1.9$\%. When combining our results with the measurements from other QUIJOTE studies of SNRs, we find that radio spectral indices are flatter for mature SNRs, and particularly flatter for CTB 80 ($-0.24^{+0.07}_{-0.06}$) and HB 21 ($-0.34^{+0.04}_{-0.03}$). In addition, the evolution of the spectral indices against the SNRs age is modelled with a power-law function, providing an exponent $-0.07\pm0.03$ and amplitude $-0.49\pm0.02$ (normalised at 10 kyr), which are conservative with respect to previous studies of our Galaxy and the Large Magellanic Cloud.

astro-ph.HE

Parametric amplification via superconducting contacts in a Ka band niobium pillbox cavity

Superconducting parametric amplifiers are commonly fabricated using planar transmission lines with a non-linear inductance provided by either Josephson junctions or the intrinsic kinetic inductance of the thin film. However, Banys et al. [1] reported non-linear behaviour in a niobium pillbox cavity, hypothesising that below Tc, the pair iris-bulk resonator would act as a superconducting contact surface exploiting a Josephson-like non-linearity. This work investigates this effect further by applying Keysight Technologies' Advanced Design System (ADS) to simulate the cavity using an equivalent circuit model that includes a user defined Josephson inductance component. The simulations show that for a resonance centred at nu0 = 30.649 GHz, when two tones (pump and signal) are injected into the cavity, mixing and parametric gain occur. The maximum achievable gain is explored when the resonator is taken to its bifurcation energy. These results are compared to cryogenic measurements where the pump and signal are provided by a Vector Network Analyzer.

physics.ins-det

Millimetre Wave Kinetic Inductance Parametric Amplification using Ridge Gap Waveguide

We present the design and simulation methodology of a superconducting ridge-gap waveguide (RGWG) as a potential basis for mm-wave kinetic inductance travelling wave parametric amplifiers (KI-TWPAs). A superconducting RGWG was designed using Ansys HFSS to support a quasi-TEM mode of transmission over a bandwidth of 20 to 120 GHz with its internal dimensions optimised for integration with W-band rectangular waveguide. A design of an impedance loaded travelling wave structure incorporating periodic perturbations of the ridge was described. A method to simulate the nonlinear kinetic inductance via user-defined components in Keysight's ADS was outlined, which yielded the power dependent S-parameters and parametric signal gain. A RGWG with a 30 nm NbTiN coating and 5 um conductor spacing, corresponding to a kinetic inductance fraction $α\sim 60\%$ was used for the description of a KI-TWPA with 900 perturbations equivalent to a physical length 25 cm that achieved more than 10 dB of signal gain over a 75--110 GHz bandwidth via 4-wave mixing (4WM).

cond-mat.supr-con

The Simons Observatory: the Large Aperture Telescope (LAT)

The Simons Observatory (SO) is a Cosmic Microwave Background (CMB) experiment to observe the microwave sky in six frequency bands from 30GHz to 290GHz. The Observatory -- at $\sim$5200m altitude -- comprises three Small Aperture Telescopes (SATs) and one Large Aperture Telescope (LAT) at the Atacama Desert, Chile. This research note describes the design and current status of the LAT along with its future timeline.

astro-ph.IM

QUBIC: Exploring the primordial Universe with the Q\&U Bolometric Interferometer

In this paper we describe QUBIC, an experiment that will observe the polarized microwave sky with a novel approach, which combines the sensitivity of state-of-the art bolometric detectors with the systematic effects control typical of interferometers. QUBIC unique features are the so-called "self-calibration", a technique that allows us to clean the measured data from instrumental effects, and its spectral imaging power, i.e. the ability to separate the signal in various sub-bands within each frequency band. QUBIC will observe the sky in two main frequency bands: 150 GHz and 220 GHz. A technological demonstrator is currently under testing and will be deployed in Argentina during 2019, while the final instrument is expected to be installed during 2020.

astro-ph.IM

Measurements of tropospheric ice clouds with a ground-based CMB polarization experiment, POLARBEAR

The polarization of the atmosphere has been a long-standing concern for ground-based experiments targeting cosmic microwave background (CMB) polarization. Ice crystals in upper tropospheric clouds scatter thermal radiation from the ground and produce a horizontally-polarized signal. We report the detailed analysis of the cloud signal using a ground-based CMB experiment, POLARBEAR, located at the Atacama desert in Chile and observing at 150 GHz. We observe horizontally-polarized temporal increases of low-frequency fluctuations ("polarized bursts," hereafter) of $\lesssim$0.1 K when clouds appear in a webcam monitoring the telescope and the sky. The hypothesis of no correlation between polarized bursts and clouds is rejected with $>$24$σ$ statistical significance using three years of data. We consider many other possibilities including instrumental and environmental effects, and find no other reasons other than clouds that can explain the data better. We also discuss the impact of the cloud polarization on future ground-based CMB polarization experiments.

astro-ph.IM

Simons Observatory Large Aperture Telescope Receiver Design Overview

The Simons Observatory (SO) will make precision temperature and polarization measurements of the cosmic microwave background (CMB) using a series of telescopes which will cover angular scales between one arcminute and tens of degrees and sample frequencies between 27 and 270 GHz. Here we present the current design of the large aperture telescope receiver (LATR), a 2.4 m diameter cryostat that will be mounted on the SO 6 m telescope and will be the largest CMB receiver to date. The cryostat size was chosen to take advantage of the large focal plane area having high Strehl ratios, which is inherent to the Cross-Dragone telescope design. The LATR will be able to accommodate thirteen optics tubes, each having a 36 cm diameter aperture and illuminating several thousand transition-edge sensor (TES) bolometers. This set of equipment will provide an opportunity to make measurements with unparalleled sensitivity. However, the size and complexity of the LATR also pose numerous technical challenges. In the following paper, we present the design of the LATR and include how we address these challenges. The solutions we develop in the process of designing the LATR will be informative for the general CMB community, and for future CMB experiments like CMB-S4.

astro-ph.IM

Cooldown Strategies and Transient Thermal Simulations for the Simons Observatory

The Simons Observatory (SO) will provide precision polarimetry of the cosmic microwave background (CMB) using a series of telescopes which will cover angular scales from arc-minutes to tens of degrees, contain over 60,000 detectors, and observe in frequency bands between 27 GHz and 270 GHz. SO will consist of a six-meter-aperture telescope initially coupled to ~35,000 detectors along with an array of 0.5m aperture refractive cameras, coupled to an additional 30,000+ detectors. The large aperture telescope receiver (LATR) is coupled to a six-meter crossed Dragone telescope and will be 2.4m in diameter, weigh over 3 tons, and have five cryogenic stages (80 K, 40 K, 4 K, 1 K and 100 mK). The LATR is coupled to the telescope via 13 independent optics tubes containing cryogenic optical elements and detectors. The cryostat will be cooled by by two Cryomech PT90 (80 K) and three Cryomech PT420 (40 K and 4 K) pulse tube cryocoolers, with cooling of the 1 K and 100 mK stages by a commercial dilution refrigerator system. The second component, the small aperture telescope (SAT), is a single optics tube refractive cameras of 42cm diameter. Cooling of the SAT stages will be provided by two Cryomech PT420, one of which is dedicated to the dilution refrigeration system which will cool the focal plane to 100 mK. SO will deploy a total of three SATs. In order to estimate the cool down time of the camera systems given their size and complexity, a finite difference code based on an implicit solver has been written to simulate the transient thermal behavior of both cryostats. The result from the simulations presented here predict a 35 day cool down for the LATR. The simulations suggest additional heat switches between stages would be effective in distribution cool down power and reducing the time it takes for the LATR to cool. The SAT is predicted to cool down in one week, which meets the SO design goals.

astro-ph.IM

Simons Observatory large aperture receiver simulation overview

The Simons Observatory (SO) will make precision temperature and polarization measurements of the cosmic microwave background (CMB) using a series of telescopes which will cover angular scales between one arcminute and tens of degrees, contain over 60,000 detectors, and sample frequencies between 27 and 270 GHz. SO will consist of a six-meter-aperture telescope coupled to over 30,000 detectors along with an array of half-meter aperture refractive cameras, which together couple to an additional 30,000+ detectors. SO will measure fundamental cosmological parameters of our universe, find high redshift clusters via the Sunyaev-Zeldovich effect, constrain properties of neutrinos, and seek signatures of dark matter through gravitational lensing. In this paper we will present results of the simulations of the SO large aperture telescope receiver (LATR). We will show details of simulations performed to ensure the structural integrity and thermal performance of our receiver, as well as will present the results of finite element analyses (FEA) of designs for the structural support system. Additionally, a full thermal model for the LATR will be described. The model will be used to ensure we meet our design requirements. Finally, we will present the results of FEA used to identify the primary vibrational modes, and planned methods for suppressing these modes. Design solutions to each of these problems that have been informed by simulation will be presented.

astro-ph.IM

The Simons Observatory: Instrument Overview

The Simons Observatory (SO) will make precise temperature and polarization measurements of the cosmic microwave background (CMB) using a set of telescopes which will cover angular scales between 1 arcminute and tens of degrees, contain over 60,000 detectors, and observe at frequencies between 27 and 270 GHz. SO will consist of a 6 m aperture telescope coupled to over 30,000 transition-edge sensor bolometers along with three 42 cm aperture refractive telescopes, coupled to an additional 30,000+ detectors, all of which will be located in the Atacama Desert at an altitude of 5190 m. The powerful combination of large and small apertures in a CMB observatory will allow us to sample a wide range of angular scales over a common survey area. SO will measure fundamental cosmological parameters of our universe, constrain primordial fluctuations, find high redshift clusters via the Sunyaev-Zel`dovich effect, constrain properties of neutrinos, and trace the density and velocity of the matter in the universe over cosmic time. The complex set of technical and science requirements for this experiment has led to innovative instrumentation solutions which we will discuss. The large aperture telescope will couple to a cryogenic receiver that is 2.4 m in diameter and nearly 3 m long, creating a number of technical challenges. Concurrently, we are designing the array of cryogenic receivers housing the 42 cm aperture telescopes. We will discuss the sensor technology SO will use and we will give an overview of the drivers for and designs of the SO telescopes and receivers, with their cold optical components and detector arrays.

astro-ph.IM

Design and characterization of the POLARBEAR-2b and POLARBEAR-2c cosmic microwave background cryogenic receivers

The POLARBEAR-2/Simons Array Cosmic Microwave Background (CMB) polarization experiment is an upgrade and expansion of the existing POLARBEAR-1 (PB-1) experiment, located in the Atacama desert in Chile. Along with the CMB temperature and $E$-mode polarization anisotropies, PB-1 and the Simons Array study the CMB $B$-mode polarization anisotropies produced at large angular scales by inflationary gravitational waves, and at small angular scales by gravitational lensing. These measurements provide constraints on various cosmological and particle physics parameters, such as the tensor-to-scalar ratio $r$, and the sum of the neutrino masses. The Simons Array consists of three 3.5 m diameter telescopes with upgraded POLARBEAR-2 (PB-2) cryogenic receivers, named PB-2a, -2b, and -2c. PB-2a and -2b will observe the CMB over multiple bands centered at 95 GHz and 150 GHz, while PB-2c will observe at 220 GHz and 270 GHz, which will enable enhanced foreground separation and de-lensing. Each Simons Array receiver consists of two cryostats which share the same vacuum space: an optics tube containing the cold reimaging lenses and Lyot stop, infrared-blocking filters, and cryogenic half-wave plate; and a backend which contains the focal plane detector array, cold readout components, and millikelvin refrigerator. Each PB-2 focal plane array is comprised of 7,588 dual-polarization, multi-chroic, lenslet- and antenna-coupled, Transition Edge Sensor (TES) bolometers which are cooled to 250 mK and read out using Superconducting Quantum Interference Devices (SQUIDs) through a digital frequency division multiplexing scheme with a multiplexing factor of 40. In this work we describe progress towards commissioning the PB-2b and -2c receivers including cryogenic design, characterization, and performance of both the PB-2b and -2c backend cryostats.

astro-ph.IM

A Cryogenic Ultra-Low-Noise MMIC-based LNA with a discrete First Stage Transistor Suitable for Radio Astronomy Applications

In this paper a new design of MMIC based LNA is outlined. This design uses a discrete 100-nm InP HEMT placed in front of an existing InP MMIC LNA to lower the overall noise temperature of the LNA. This new approach known as the Transistor in front of MMIC (T+MMIC) LNA, possesses a gain in excess of 40dB and an average noise temperature of 9.4K compared to 14.5K for the equivalent MMIC-only LNA measured across a 27-33GHz bandwidth at a physical temperature of 8K. A simple ADS model offering further insights into the operation of the LNA is also presented and a potential radio astronomy application is discussed

astro-ph.IM

PRISM (Polarized Radiation Imaging and Spectroscopy Mission): A White Paper on the Ultimate Polarimetric Spectro-Imaging of the Microwave and Far-Infrared Sky

PRISM (Polarized Radiation Imaging and Spectroscopy Mission) was proposed to ESA in response to the Call for White Papers for the definition of the L2 and L3 Missions in the ESA Science Programme. PRISM would have two instruments: (1) an imager with a 3.5m mirror (cooled to 4K for high performance in the far-infrared---that is, in the Wien part of the CMB blackbody spectrum), and (2) an Fourier Transform Spectrometer (FTS) somewhat like the COBE FIRAS instrument but over three orders of magnitude more sensitive. Highlights of the new science (beyond the obvious target of B-modes from gravity waves generated during inflation) made possible by these two instruments working in tandem include: (1) the ultimate galaxy cluster survey gathering 10e6 clusters extending to large redshift and measuring their peculiar velocities and temperatures (through the kSZ effect and relativistic corrections to the classic y-distortion spectrum, respectively) (2) a detailed investigation into the nature of the cosmic infrared background (CIB) consisting of at present unresolved dusty high-z galaxies, where most of the star formation in the universe took place, (3) searching for distortions from the perfect CMB blackbody spectrum, which will probe a large number of otherwise inaccessible effects (e.g., energy release through decaying dark matter, the primordial power spectrum on very small scales where measurements today are impossible due to erasure from Silk damping and contamination from non-linear cascading of power from larger length scales). These are but a few of the highlights of the new science that will be made possible with PRISM.

astro-ph.CO

A Tiltable Single-Shot Miniature Dilution Refrigerator for Astrophysical Applications

We present a 3He / 4He dilution refrigerator designed for cooling astronomical mm-wave telescope receivers to around 100 mK. Used in combination with a Gifford-McMahon closed-cycle refrigerator, 4He and 3He sorption-pumped refrigerators, our cryogen-free system is capable of achieving 2 microW cooling power at 87 mK. A receiver attached directly to the telescope optics is required to rotate with respect to the downward direction. This scenario, of variable tilt, has proved difficult for typical dilution refrigerators, but our design has a geometry chosen to allow tilt to 45 degrees and beyond.

astro-ph.IM