arXiv subjects

Luis A. Correa

Publications and source records attributed to Luis A. Correa.

At least 19 recordsLinked to original sources

arXiv2026

Parameter Estimation in a Continuously Monitored Non-Markovian Quantum System

Continuous monitoring is a powerful tool for analyzing quantum systems and is increasingly used as a non-demolition technique in quantum metrology. In this context, noisy data acquired through continuous monitoring can be used to precisely pinpoint unknown parameters of the system. However, extending the theoretical framework that connects these data to the underlying parameters beyond Markovian dynamics is notoriously difficult, primarily because such dynamics cannot be expressed as completely positive divisible maps. To overcome this, we propose a method based on the reaction coordinate mapping to extend these parameter-estimation techniques beyond the Markovian regime. Our approach specifically targets linear systems with non-Markovian dynamics undergoing Gaussian continuous measurements, such as homodyne detection. Within this framework, we analyze Bayesian estimation and provide an analytical expression for the Fisher information, alongside the asymptotic scaling of the estimation precision for arbitrary parameters. Finally, we demonstrate the efficacy of our method through the example of thermometry of a bosonic bath.

quant-ph↗

arXiv2026

Equilibrium thermometry in the multilevel quantum Rabi model

The temperature sensitivity of a probe in equilibrium can be gauged by its thermal quantum Fisher information (QFI). It is known that probes exhibiting degeneracy in their energy-level structure can achieve larger sensitivities, while probes with a more uniform spectrum may remain sensitive over a broader temperature range. Here, we study the thermometric performance of a multilevel quantum Rabi model in which two well-separated atomic manifolds of near-degenerate levels couple to a single cavity mode. We generalise the standard quantum Rabi treatment in the adiabatic regime to find an approximate closed-form expression for the thermal QFI. We then characterise two complementary limits. On the one hand, a large dark-state manifold (dark-manifold saturation) produces a robust peak in thermal sensitivity due to bright--dark population transfer. Such increase in sensitivity is further maximised at an intermediate light--matter coupling strength. Maximising instead the number of bright states (bright-manifold saturation) generates a broadband thermal response that becomes increasingly stable under random light--matter couplings as the number of levels is increased. The rich spectral structure of our cavity-QED model thus makes it a versatile and sensitive equilibrium thermometer over a broad range of temperatures.

quant-ph↗

arXiv2026

Roadmap on Quantum Thermodynamics

The last two decades has seen quantum thermodynamics become a well established field of research in its own right. In that time, it has demonstrated a remarkably broad applicability, ranging from providing foundational advances in the understanding of how thermodynamic principles apply at the nano-scale and in the presence of quantum coherence, to providing a guiding framework for the development of efficient quantum devices. Exquisite levels of control have allowed state-of-the-art experimental platforms to explore energetics and thermodynamics at the smallest scales which has in turn helped to drive theoretical advances. This Roadmap provides an overview of the recent developments across many of the field's sub-disciplines, assessing the key challenges and future prospects, providing a guide for its near term progress.

quant-ph↗

arXiv2025

Potential renormalisation, Lamb shift and mean-force Gibbs state -- to shift or not to shift?

Often, the microscopic interaction mechanism of an open quantum system gives rise to a `counter term' which renormalises the system Hamiltonian. Such term compensates for the distortion of the system's potential due to the finite coupling to the environment. Even if the coupling is weak, the counter term is, in general, not negligible. Similarly, weak-coupling master equations feature a number of `Lamb-shift terms' which, contrary to popular belief, cannot be neglected. Yet, the practice of vanishing both counter term and Lamb shift when dealing with master equations is almost universal; and, surprisingly, it can yield better results. By accepting the conventional wisdom, one may approximate the dynamics more accurately and, importantly, the resulting master equation is guaranteed to equilibrate to the correct steady state in the high-temperature limit. In this paper we discuss why is this the case. Specifically, we show that, if the potential distortion is small -- but non-negligible -- the counter term does not influence any dissipative processes to second order in the coupling. Furthermore, we show that, for large environmental cutoff, the Lamb-shift terms approximately cancel any coherent effects due to the counter term -- this renders the combination of both contributions irrelevant in practice. We thus provide precise conditions under which the open-system folklore regarding Lamb shift and counter terms is rigorously justified.

quant-ph↗

arXiv2025

On the role of symmetry and geometry in global quantum sensing

Global quantum sensing enables parameter estimation across arbitrary ranges with a finite number of measurements. Among the various existing formulations, the Bayesian paradigm stands as a flexible approach for optimal protocol design under minimal assumptions. Within this paradigm, however, there are two fundamentally different ways to capture prior ignorance and uninformed estimation; namely, requiring invariance of the prior distribution under specific parameter transformations, or adhering to the geometry of a state space. In this paper we carefully examine the practical consequences of both the invariance-based and the geometry-based approaches, and show how to apply them in relevant examples of rate and coherence estimation in noisy settings. We find that, while the invariance-based approach often leads to simpler priors and estimators and is more broadly applicable in adaptive scenarios, the geometry-based one can lead to faster posterior convergence in a well-defined measurement setting. Crucially, by employing the notion of location-isomorphic parameters, we are able to unify the two formulations into a single practical and versatile framework for optimal global quantum sensing, detailing when and how each set of assumptions should be employed to tackle any given estimation task. We thus provide a blueprint for the design of novel high-precision quantum sensors.

quant-ph↗

arXiv2025

Accurate heat currents via reorganised master equation

The accurate characterisation of energy exchanges between nanoscale quantum systems and their environments is of paramount importance for quantum technologies, and central to quantum thermodynamics. Here, we show that, in order to accurately approximate steady-state heat currents via perturbative master equations, the coupling-induced reorganisation correction to the system's energy must be carefully taken into account. Not doing so, may yield sizeable errors, especially at low, or even moderate temperatures. In particular, we show how a 'reorganised master equation' can produce very accurate estimates for the heat currents when the reorganisation energy is weak and one works with environments with a broad spectrum. Notably, such master equation outperforms its 'non-reorganised' counterpart in the calculation of heat currents, at modelling dynamics, and at correctly capturing equilibration. This is so even if both types of equation are derived to the same order of perturbation theory. Most importantly, working with reorganised master equations does not involve additional complications when compared with alternative approaches. Also, invoking the secular approximation to secure thermodynamic consistency does not compromise their precision.

quant-ph↗

arXiv2024

Simultaneous photon and phonon lasing in a two-tone driven optomechanical system

Achieving simultaneous lasing of photons and phonons in optomechanical setups has great potential for applications in quantum information processing, high precision sensing and the design of hybrid photonic-phononic devices. Here, we explore this possibility with an optomechanical system driven by a two-tone field. Whenever the difference between the driving frequencies matches the associated mechanical frequency, the photon and phonon populations are found to achieve steady-state coherent oscillations, demonstrating a dual lasing phenomenon. Such drive-tone resonance condition can synchronize the phases of the photon and phonon fields, which facilitates a robust simultaneous lasing. Here, we provide analytical insights into the joint amplification of the optical and mechanical modes, and further confirm the dual lasing phenomenon by numerically calculating the relevant correlation functions and the power spectrum. Our setup, consisting of a single optomechanical cavity, is simpler than previous realizations of dual lasing and provides a clean picture of the underlying mechanisms. Our work thus paves the way for the development of novel strategies for the optimisation of optomechanical interactions through tailored driving schemes.

quant-ph↗

arXiv2023

Energy measurements remain thermometrically optimal beyond weak coupling

We develop a general perturbative theory of finite-coupling quantum thermometry up to second order in probe-sample interaction. By assumption, the probe and sample are in thermal equilibrium, so the probe is described by the mean-force Gibbs state. We prove that the ultimate thermometric precision can be achieved - to second order in the coupling - solely by means of local energy measurements on the probe. Hence, seeking to extract temperature information from coherences or devising adaptive schemes confers no practical advantage in this regime. Additionally, we provide a closed-form expression for the quantum Fisher information, which captures the probe's sensitivity to temperature variations. Finally, we benchmark and illustrate the ease of use of our formulas with two simple examples. Our formalism makes no assumptions about separation of dynamical timescales or the nature of either the probe or the sample. Therefore, by providing analytical insight into both the thermal sensitivity and the optimal measurement for achieving it, our results pave the way for quantum thermometry in setups where finite-coupling effects cannot be ignored.

quant-ph↗

arXiv2022

Optimal cold atom thermometry using adaptive Bayesian strategies

Precise temperature measurements on systems of few ultracold atoms is of paramount importance in quantum technologies, but can be very resource-intensive. Here, we put forward an adaptive Bayesian framework that substantially boosts the performance of cold atom temperature estimation. Specifically, we process data from real and simulated release--recapture thermometry experiments on few potassium atoms cooled down to the microkelvin range in an optical tweezer. From simulations, we demonstrate that adaptively choosing the release--recapture times to maximise information gain does substantially reduce the number of measurements needed for the estimate to converge to a final reading. Unlike conventional methods, our proposal systematically avoids capturing and processing uninformative data. We also find that a simpler non-adaptive method exploiting all the a priori information can yield competitive results, and we put it to the test on real experimental data. Furthermore, we are able to produce much more reliable estimates, especially when the measured data are scarce and noisy, and they converge faster to the real temperature in the asymptotic limit. Importantly, the underlying Bayesian framework is not platform-specific and can be adapted to enhance precision in other setups, thus opening new avenues in quantum thermometry.

quant-ph↗

arXiv2022

Bending the rules of low-temperature thermometry with periodic driving

There exist severe limitations on the accuracy of low-temperature thermometry, which poses a major challenge for future quantum-technological applications. Low-temperature sensitivity might be manipulated by tailoring the interactions between probe and sample. Unfortunately, the tunability of these interactions is usually very restricted. Here, we focus on a more practical solution to boost thermometric precision -- driving the probe. Specifically, we solve for the limit cycle of a periodically modulated linear probe in an equilibrium sample. We treat the probe-sample interactions \textit{exactly} and hence, our results are valid for arbitrarily low temperatures $ T $ and any spectral density. We find that weak near-resonant modulation strongly enhances the signal-to-noise ratio of low-temperature measurements, while causing minimal back action on the sample. Furthermore, we show that near-resonant driving changes the power law that governs thermal sensitivity over a broad range of temperatures, thus `bending' the fundamental precision limits and enabling more sensitive low-temperature thermometry. We then focus on a concrete example -- impurity thermometry in an atomic condensate. We demonstrate that periodic driving allows for a sensitivity improvement of several orders of magnitude in sub-nanokelvin temperature estimates drawn from the density profile of the impurity atoms. We thus provide a feasible upgrade that can be easily integrated into low-$T$ thermometry experiments.

quant-ph↗

arXiv2021

Global Quantum Thermometry

A paradigm shift in quantum thermometry is proposed. To date, thermometry has relied on local estimation, which is useful to reduce statistical fluctuations once the temperature is very well known. In order to estimate temperatures in cases where few measurement data or no substantial prior knowledge are available, we build instead a theory of global quantum thermometry. Based on scaling arguments, a mean logarithmic error is shown here to be the correct figure of merit for thermometry. Its full minimisation provides an operational and optimal rule to post-process measurements into a temperature reading, and it establishes a global precision limit. We apply these results to the simulated outcomes of measurements on a spin gas, finding that the local approach can lead to biased temperature estimates in cases where the global estimator converges to the true temperature. The global framework thus enables a reliable approach to data analysis in thermometry experiments.

quant-ph↗

arXiv2021

Local master equations bypass the secular approximation

Master equations are a vital tool to model heat flow through nanoscale thermodynamic systems. Most practical devices are made up of interacting sub-system, and are often modelled using either local master equations (LMEs) or global master equations (GMEs). While the limiting cases in which either the LME or the GME breaks down are well understood, there exists a 'grey area' in which both equations capture steady-state heat currents reliably, but predict very different transient heat flows. In such cases, which one should we trust? Here, we show that, when it comes to dynamics, the local approach can be more reliable than the global one for weakly interacting open quantum systems. This is due to the fact that the secular approximation, which underpins the GME, can destroy key dynamical features. To illustrate this, we consider a minimal transport setup and show that its LME displays exceptional points (EPs). These singularities have been observed in a superconducting-circuit realisation of the model [1]. However, in stark contrast to experimental evidence, no EPs appear within the global approach. We then show that the EPs are a feature built into the Redfield equation, which is more accurate than the LME and the GME. Finally, we show that the local approach emerges as the weak-interaction limit of the Redfield equation, and that it entirely avoids the secular approximation.

quant-ph↗

arXiv2019

Pushing the limits of the reaction-coordinate mapping

The reaction-coordinate mapping is a useful technique to study complex quantum dissipative dynamics into structured environments. In essence, it aims to mimic the original problem by means of an 'augmented system', which includes a suitably chosen collective environmental coordinate---the 'reaction coordinate'. This composite then couples to a simpler 'residual reservoir' with short-lived correlations. If, in addition, the residual coupling is weak, a simple quantum master equation can be rigorously applied to the augmented system, and the solution of the original problem just follows from tracing out the reaction coordinate. But, what if the residual dissipation is strong? Here we consider an exactly solvable model for heat transport---a two-node linear "quantum wire" connecting two baths at different temperatures. We allow for a structured spectral density at the interface with one of the reservoirs and perform the reaction-coordinate mapping, writing a perturbative master equation for the augmented system. We find that: (a) strikingly, the stationary state of the original problem can be reproduced accurately by a weak-coupling treatment even when the residual dissipation on the augmented system is very strong; (b) the agreement holds throughout the entire dynamics under large residual dissipation in the overdamped regime; (c) and that such master equation can grossly overestimate the stationary heat current across the wire, even when its non-equilibrium steady state is captured faithfully. These observations can be crucial when using the reaction-coordinate mapping to study the largely unexplored strong-coupling regime in quantum thermodynamics.

quant-ph↗

arXiv2019

Thermometry in the quantum regime: Recent theoretical progress

Controlling and measuring the temperature in different devices and platforms that operate in the quantum regime is, without any doubt, essential for any potential application. In this review, we report the most recent theoretical developments dealing with accurate estimation of very low temperatures in quantum systems. Together with the emerging experimental techniques and developments of measurement protocols, the theory of quantum thermometry will decisively impinge and shape the forthcoming quantum technologies. While current quantum thermometric methods differ greatly depending on the experimental platform, the achievable precision, and the temperature range of interest, the theory of quantum thermometry is built under a unifying framework at the crossroads of quantum metrology, open quantum systems, and quantum many-body physics. At a fundamental level, theoretical quantum thermometry is concerned with finding the ultimate bounds and scaling laws that limit the precision of temperature estimation for systems in and out-of-thermal equilibrium. At a more practical level, it provides tools to formulate precise, yet feasible, thermometric protocols for relevant experimental architectures. Last but not least, the theory of quantum thermometry examines genuine quantum features, like entanglement and coherence, for their exploitation in enhanced-resolution thermometry.

quant-ph↗

arXiv2019

Classical emulation of quantum-coherent thermal machines

The performance enhancements observed in various models of continuous quantum thermal machines have been linked to the buildup of coherences in a preferred basis. But, is this connection always an evidence of `quantum-thermodynamic supremacy'? By force of example, we show that this is not the case. In particular, we compare a power-driven three-level continuous quantum refrigerator with a four-level combined cycle, partly driven by power and partly by heat. We focus on the weak driving regime and find the four-level model to be superior since it can operate in parameter regimes in which the three-level model cannot, it may exhibit a larger cooling rate, and, simultaneously, a better coefficient of performance. Furthermore, we find that the improvement in the cooling rate matches the increase in the stationary quantum coherences exactly. Crucially, though, we also show that the thermodynamic variables for both models follow from a classical representation based on graph theory. This implies that we can build incoherent stochastic-thermodynamic models with the same steady-state operation or, equivalently, that both coherent refrigerators can be emulated classically. More generally, we prove this for any N-level weakly driven device with a `cyclic' pattern of transitions. Therefore, even if coherence is present in a specific quantum thermal machine, it is often not essential to replicate the underlying energy conversion process.

quant-ph↗

arXiv2019

Wigner entropy production and heat transport in linear quantum lattices

When a quantum system is coupled to several heat baths at different temperatures, it eventually reaches a non-equilibrium steady state featuring stationary internal heat currents. These currents imply that entropy is continually being produced in the system at a constant rate. In this paper we apply phase-space techniques to the calculation of the Wigner entropy production on general linear networks of harmonic nodes. Working in the ubiquitous limit of weak internal coupling and weak dissipation, we obtain simple closed-form expressions for the entropic contribution of each individual quasi-probability current. Our analysis highlights the essential role played by the internal unitary interactions (node-node couplings) in maintaining a non-equilibrium steady-state and hence a finite entropy production rate. We also apply this formalism to the paradigmatic problem of energy transfer through a chain of oscillators subject to self-consistent internal baths that can be used to tune the transport from ballistic to diffusive. We find that the entropy production scales with different power law behaviors in the ballistic and diffusive regimes, hence allowing us to quantify what is the "entropic cost of diffusivity."

quant-ph↗

arXiv2018

Using polarons for sub-nK quantum non-demolition thermometry in a Bose-Einstein condensate

We introduce a novel minimally-disturbing method for sub-nK thermometry in a Bose-Einstein condensate (BEC). Our technique is based on the Bose-polaron model; namely, an impurity embedded in the BEC acts as the thermometer. We propose to detect temperature fluctuations from measurements of the position and momentum of the impurity. Crucially, these cause minimal back-action on the BEC and hence, realize a non-demolition temperature measurement. Following the paradigm of the emerging field of \textit{quantum thermometry}, we combine tools from quantum parameter estimation and the theory of open quantum systems to solve the problem in full generality. We thus avoid \textit{any} simplification, such as demanding thermalization of the impurity atoms, or imposing weak dissipative interactions with the BEC. Our method is illustrated with realistic experimental parameters common in many labs, thus showing that it can compete with state-of-the-art \textit{destructive} techniques, even when the estimates are built from the outcomes of accessible (sub-optimal) quadrature measurements.

cond-mat.quant-gas↗

arXiv2018

Probing the temperature of cold many-body quantum systems

It is "conventional wisdom" that the uncertainty of local temperature measurements on equilibrium systems diverges exponentially fast as their temperature $T$ drops to zero. In contrast, some exactly solvable models showcase a more benign power-law-like scaling, when only a small non-equilibrium fragment of the equilibrium system is measured. Does this mean that a part may contain more information about the global temperature than the whole? Certainly not. Here, we resolve this apparent paradox. First, we prove that local quantum thermometry at low $T$ is exponentially inefficient in non-critical, gapped, and infinite spin and harmonic lattices. In contrast, we show through an open-system analysis, that the thermal sensitivity of a harmonic thermometer (probe) jointly equilibrated with a reservoir (sample) by means of an Ohmic coupling scheme, displays a distinctive power-law-like behavior as $T \rightarrow 0$. To reconcile these two results, we exploit the fact that local thermometry on a harmonic chain may be viewed as a temperature measurement on an oscillator in a discretized harmonic environment: A gapped translationally invariant chain (for which low--$T$ thermometry is indeed exponentially inefficient) maps into a non-standard open-system model where the low-frequency modes of the sample decouple from the probe. On the contrary, a gapless instance of such chain gives rise to the canonical Ohmic probe-sample interaction, which does include sample modes of arbitrarily low frequency. In this way, we show that the power-law-like thermometric performance observed in typical dissipative models stems from the fact that these are gapless and, as such, not subjected to the exponential limitations of their gapped counterparts. The key feature of many-body systems, when it comes to the ultimate limitations of low--$T$ thermometry, is thus whether or not their energy spectrum is gapped.

quant-ph↗