arXiv subjects

Luis A. Correa

Publications and source records attributed to Luis A. Correa.

35 records · Page 2Linked to original sources

arXiv2018

Energy-efficient quantum frequency estimation

The problem of estimating the frequency of a two-level atom in a noisy environment is studied. Our interest is to minimise both the energetic cost of the protocol and the statistical uncertainty of the estimate. In particular, we prepare a probe in a "GHZ-diagonal" state by means of a sequence of qubit gates applied on an ensemble of $ n $ atoms in thermal equilibrium. Noise is introduced via a phenomenological time-nonlocal quantum master equation, which gives rise to a phase-covariant dissipative dynamics. After an interval of free evolution, the $ n $-atom probe is globally measured at an interrogation time chosen to minimise the error bars of the final estimate. We model explicitly a measurement scheme which becomes optimal in a suitable parameter range, and are thus able to calculate the total energetic expenditure of the protocol. Interestingly, we observe that scaling up our multipartite entangled probes offers no precision enhancement when the total available energy $ \mathcal{E} $ is limited. This is at stark contrast with standard frequency estimation, where larger probes---more sensitive but also more "expensive" to prepare---are always preferred. Replacing $ \mathcal{E} $ by the resource that places the most stringent limitation on each specific experimental setup, would thus help to formulate more realistic metrological prescriptions.

quant-ph↗

arXiv2017

Low-temperature thermometry can be enhanced by strong coupling

We consider the problem of estimating the temperature $ T $ of a very cold equilibrium sample. The temperature estimates are drawn from measurements performed on a quantum probe strongly coupled to it. We model this scenario by resorting to the canonical Caldeira-Leggett Hamiltonian and find analytically the exact stationary state of the probe for arbitrary coupling strength. In general, the probe does not reach thermal equilibrium with the sample, due to their non-perturbative interaction. We argue that this is advantageous for low temperature thermometry, as we show in our model that: (i) The thermometric precision at low $ T $ can be significantly enhanced by strengthening the probe-sampling coupling, (ii) the variance of a suitable quadrature of our Brownian thermometer can yield temperature estimates with nearly minimal statistical uncertainty, and (iii) the spectral density of the probe-sample coupling may be engineered to further improve thermometric performance. These observations may find applications in practical nanoscale thermometry at low temperatures---a regime which is particularly relevant to quantum technologies.

quant-ph↗

arXiv2017

Testing the validity of the local and global GKLS master equations on an exactly solvable model

When deriving a master equation for a multipartite weakly-interacting open quantum systems, dissipation is often addressed \textit{locally} on each component, i.e. ignoring the coherent couplings, which are later added `by hand'. Although simple, the resulting local master equation (LME) is known to be thermodynamically inconsistent. Otherwise, one may always obtain a consistent \textit{global} master equation (GME) by working on the energy basis of the full interacting Hamiltonian. Here, we consider a two-node `quantum wire' connected to two heat baths. The stationary solution of the LME and GME are obtained and benchmarked against the exact result. Importantly, in our model, the validity of the GME is constrained by the underlying secular approximation. Whenever this breaks down (for resonant weakly-coupled nodes), we observe that the LME, in spite of being thermodynamically flawed: (a) predicts the correct steady state, (b) yields the exact asymptotic heat currents, and (c) reliably reflects the correlations between the nodes. In contrast, the GME fails at all three tasks. Nonetheless, as the inter-node coupling grows, the LME breaks down whilst the GME becomes correct. Hence, the global and local approach may be viewed as \textit{complementary} tools, best suited to different parameter regimes.

quant-ph↗

arXiv2017

Connecting measurement invasiveness to optimal metrological scenarios

The connection between the Leggett-Garg inequality and optimal scenarios from the point of view of quantum metrology is investigated for perfect and noisy general dichotomic measurements. In this context, we show that the Fisher information can be expressed in terms of quantum temporal correlations. This connection allows us to associate scenarios with relatively high Fisher information to scenarios in which the Leggett-Garg inequality is violated. We thus demonstrate a qualitative and, to some extent, quantitative link between measurement invasiveness and metrological performance. Finally, we illustrate our results by using a specific model for spin systems.

quant-ph↗

arXiv2016

Practical Quantum Metrology in Noisy Environments

The problem of estimating an unknown phase $ φ$ using two-level probes in the presence of unital phase-covariant noise and using finite resources is investigated. We introduce a simple model in which the phase-imprinting operation on the probes is realized by a unitary transformation with a randomly sampled generator. We determine the optimal phase sensitivity in a sequential estimation protocol, and derive a general (tight-fitting) lower bound. The sensitivity grows quadratically with the number of applications $ N $ of the phase-imprinting operation, then attains a maximum at some $ N_\text{opt} $, and eventually decays to zero. We provide an estimate of $ N_\text{opt} $ in terms of accessible geometric properties of the noise and illustrate its usefulness as a guideline for optimizing the estimation protocol. The use of passive ancillas and of entangled probes in parallel to improve the phase sensitivity is also considered. We find that multi-probe entanglement may offer no practical advantage over single-probe coherence if the interrogation at the output is restricted to measuring local observables.

quant-ph↗

arXiv2016

Achieving sub-shot-noise sensing at finite temperatures

We investigate sensing of magnetic fields using quantum spin chains at finite temperature and exploit quantum phase crossovers to improve metrological bounds on the estimation of the chain parameters. In particular, we analyze the $ XX $ spin chain and show that the magnetic sensitivity of this system is dictated by its adiabatic magnetic susceptibility, which scales extensively (linearly) in the number of spins $ N $. Next, we introduce an iterative feedforward protocol that actively exploits features of quantum phase crossovers to enable super-extensive scaling of the magnetic sensitivity. Moreover, we provide experimentally realistic observables to saturate the quantum metrological bounds. Finally, we also address magnetic sensing in the Heisenberg $ XY $ spin chain.

quant-ph↗

arXiv2016

Efficiency of inefficient endoreversible thermal machines

We present a study of the performance of endoreversible thermal machines optimized with respect to the thermodynamic force associated with the cold bath in the regime of small thermodynamic forces. These thermal machines can work either as an engine or as a refrigerator. We analyze how the optimal performances are determined by the dependence of the thermodynamic flux on the forces. The results are motivated and illustrated with a quantum model, the three level maser, and explicit analytical expressions of the engine efficiency as a function of the system parameters are given.

quant-ph↗

arXiv2016

Testing a Quantum Heat Pump with a Two-Level Spin

Once in its non-equilibrium steady state, a nanoscale system coupled to several heat baths may be thought-of as a quantum heat pump. Depending on the direction of its stationary heat flows it may function as e.g. a refrigerator or a heat transformer. These continuous heat devices can be arbitrarily complex multipartite systems, and yet their working principle is always the same: They are made up of several elementary three-level stages operating in parallel. As a result, it is possible to devise external black-box testing strategies to learn about their functionality and performance regardless of any internal details. In particular, one such heat pump can be tested by coupling a two-level spin to one of its contact transitions. The steady state of this external probe contains information about the presence of heat leaks and internal dissipation in the device, and also, about the direction of its steady-state heat currents. Provided that the irreversibility of the heat pump is low, one can further estimate its coefficient of performance. These techniques may find applications in the emerging field of quantum thermal engineering, as they facilitate the diagnosis and design optimization of complex thermodynamic cycles.

quant-ph↗

arXiv2016

Thermodynamics of quantum feedback cooling

The ability to initialize quantum registers in pure states lies at the core of many applications of quantum technologies, from sensing to quantum information processing and computation. In this paper, we tackle the problem of increasing the polarization bias of an ensemble of two-level register spins by means of joint coherent manipulations, involving a second ensemble of ancillary spins and energy dissipation into an external heat bath. We formulate this spin refrigeration protocol, akin to algorithmic cooling, in the general language of quantum feedback control, and identify the relevant thermodynamic variables involved. Our analysis is two-fold: on the one hand, we assess the optimality of the protocol by means of suitable figures of merit, accounting for both its work cost and effectiveness; on the other hand, we characterise the nature of correlations built up between the register and the ancilla. In particular, we observe that neither the amount of classical correlations nor the quantum entanglement seem to be key ingredients fuelling our spin refrigeration protocol. We report instead that a more general indicator of quantumness beyond entanglement, the so-called quantum discord, is closely related to the cooling performance.

quant-ph↗

arXiv2015

Internal dissipation and heat leaks in quantum thermodynamic cycles

The direction of the steady-state heat currents across a generic quantum system connected to multiple baths may be engineered so as to realize virtually any thermodynamic cycle. In spite of their versatility such continuous energy-conversion systems are generally unable to operate at maximum efficiency due to non-negligible sources of irreversible entropy production. In this paper we introduce a minimal model of irreversible absorption chiller. We identify and characterize the different mechanisms responsible for its irreversibility, namely heat leaks and internal dissipation, and gauge their relative impact in the overall cooling performance. We also propose reservoir engineering techniques to minimize these detrimental effects. Finally, by looking into a known three-qubit embodiment of the absorption cooling cycle, we illustrate how our simple model may help to pinpoint the different sources of irreversibility naturally arising in more complex practical heat devices.

quant-ph↗

arXiv2015

Individual quantum probes for optimal thermometry

The unknown temperature of a sample may be estimated with minimal disturbance by putting it in thermal contact with an individual quantum probe. If the interaction time is sufficiently long so that the probe thermalizes, the temperature can be read out directly from its steady state. Here we prove that the optimal quantum probe, acting as a thermometer with maximal thermal sensitivity, is an effective two-level atom with a maximally degenerate excited state. When the total interaction time is insufficient to produce full thermalization, we optimize the estimation protocol by breaking it down into sequential stages of probe preparation, thermal contact and measurement. We observe that frequently interrogated probes initialized in the ground state achieve the best performance. For both fully and partly thermalized thermometers, the sensitivity grows significantly with the number of levels, though optimization over their energy spectrum remains always crucial.

quant-ph↗

arXiv2014

Optimal performance of endoreversible quantum refrigerators

The derivation of general performance benchmarks is important in the design of highly optimized heat engines and refrigerators. To obtain them, one may model phenomenologically the leading sources of irreversibility ending up with results which are model-independent, but limited in scope. Alternatively, one can take a simple physical system realizing a thermodynamic cycle and assess its optimal operation from a complete microscopic description. We follow this approach in order to derive the coefficient of performance at maximum cooling rate for \textit{any} endoreversible quantum refrigerator. At striking variance with the \textit{universality} of the optimal efficiency of heat engines, we find that the cooling performance at maximum power is crucially determined by the details of the specific system-bath interaction mechanism. A closed analytical benchmark is found for endoreversible refrigerators weakly coupled to unstructured bosonic heat baths: an ubiquitous case study in quantum thermodynamics.

quant-ph↗

arXiv2014

Quantum-enhanced absorption refrigerators

Thermodynamics is a branch of science blessed by an unparalleled combination of generality of scope and formal simplicity. Based on few natural assumptions together with the four laws, it sets the boundaries between possible and impossible in macroscopic aggregates of matter. This triggered groundbreaking achievements in physics, chemistry and engineering over the last two centuries. Close analogues of those fundamental laws are now being established at the level of individual quantum systems, thus placing limits on the operation of quantum-mechanical devices. Here we study quantum absorption refrigerators, which are driven by heat rather than external work. We establish thermodynamic performance bounds for these machines and investigate their quantum origin. We also show how those bounds may be pushed beyond what is classically achievable, by suitably tailoring the environmental fluctuations via quantum reservoir engineering techniques. Such superefficient quantum-enhanced cooling realises a promising step towards the technological exploitation of autonomous quantum refrigerators.

quant-ph↗

arXiv2014

Multi-stage quantum absorption heat pumps

It is well known that heat pumps, while being all limited by the same basic thermodynamic laws, may find realization on systems as "small" and "quantum" as a three-level maser. In order to quantitatively assess how the performance of these devices scales with their size, we design generalized $N$-dimensional ideal heat pumps by merging $N-2$ elementary three-level stages. We set them to operate in the absorption chiller mode between given hot and cold baths, and study their maximum achievable cooling power and the corresponding efficiency as a function of $N$. While the efficiency at maximum power is roughly size-independent, the power itself slightly increases with the dimension, quickly saturating to a constant. Thus, interestingly, scaling up autonomous quantum heat pumps does not render a significant enhancement beyond the optimal double-stage configuration.

quant-ph↗

arXiv2013

Gaussian tripartite entanglement out of equilibrium

The stationary multipartite entanglement between three interacting harmonic oscillators subjected to decoherence is analyzed in the largely unexplored non-equilibrium strong dissipation regime. We compute the exact asymptotic Gaussian state of the system and elucidate its separability properties, qualitatively assessing the regions of the space of parameters in which fully inseparable states are generated. Interestingly, the sharing structure of bipartite entanglement is seen to degrade as dissipation increases even for very low temperatures, at which the system approaches its ground state. We also find that establishing stationary energy currents across the harmonic chain does not correspond with the build-up of biseparable steady states, which relates instead just to the relative intensity of thermal fluctuations.

quant-ph↗

arXiv2013

Performance bound for quantum absorption refrigerators

An implementation of quantum absorption chillers with three qubits has been recently proposed, that is ideally able to reach the Carnot performance regime. Here we study the working efficiency of such self-contained refrigerators, adopting a consistent treatment of dissipation effects. We demonstrate that the coefficient of performance at maximum cooling power is upper bounded by 3/4 of the Carnot performance. The result is independent of the details of the system and the equilibrium temperatures of the external baths. We provide design prescriptions that saturate the bound in the limit of a large difference between the operating temperatures. Our study suggests that delocalized dissipation, which must be taken into account for a proper modelling of the machine-baths interaction, is a fundamental source of irreversibility which prevents the refrigerator from approaching the Carnot performance arbitrarily closely in practice. The potential role of quantum correlations in the operation of these machines is also investigated.

quant-ph↗

arXiv2012

Asymptotic Discord and Entanglement of Non-Resonant Harmonic Oscillators in an Equilibrium Environment

In this work, we calculate the exact asymptotic quantum correlations between two interacting non-resonant harmonic oscillators in a common Ohmic bath. We derive \emph{analytical formulas} for the covariances, fully describing any Gaussian stationary state of the system, and use them to study discord and entanglement in the strong and weak dissipation regimes. We discuss the rich structure of the discord of the stationary separable states arising in the strong dissipation regime. Also under strong dissipation, when the modes are not mechanically coupled, these may entangle only through their interaction with the \emph{common} environment. Interestingly enough, this stationary entanglement is only present within a \emph{finite band of frequencies} and increases with the dissipation rate. In addition, robust entanglement between \emph{detuned} oscillators is observed at low temperature.

quant-ph↗