arXiv subjects

Lukas M. Eng

Publications and source records attributed to Lukas M. Eng.

At least 37 records · Page 2Linked to original sources

arXiv2024

High-temperature domain wall current in Mg-doped lithium niobate single crystals up to 400°C

Conductive ferroelectric domain walls (DWs) represent a promising topical system for the development of nanoelectronic components and devices. DWs show very different properties as compared to their bulk counterparts. Of central interest here is the domain wall current (DWC) of charged DWs in 5mol\% Mg-doped lithium niobate single crystals; in contrast to former works, we extend the DWC study here to temperatures as high as 400$^\circ$C. Both the temporal stability and the thermal activation energies of 90 - 160 meV are readily deduced from current-voltage sweeps as recorded over multiple heating cycles. Our experimental work is backed up by atomistic modelling of the DWC. The latter suggests that a large band bending renders head-to-head and tail-to-tail DWs semimetallic. These detailed investigations underline the potential to extend DWC-based nanoelectronic applications even into the so-far unexplored high-temperature regime.

cond-mat.mtrl-sci↗

arXiv2024

Lattice dynamics of LiNb$_{\text{1-x}}$Ta$_{\text{x}}$O$_{\text{3}}$ solid solutions: Theory and experiment

Lithium niobate (LNO) and lithium tantalate (LTO) see widespread use in fundamental research and commercial technologies reaching from electronics over classical optics to integrated quantum communication. In recent years, the mixed crystal system lithium niobate tantalate (LNT) allows for the dedicate engineering of material properties by combining the advantages of the two parental materials LNO and LTO. Vibrational spectroscopies such as Raman spectroscopy or (Fourier transform) infrared spectroscopy are vital techniques to provide detailed insight into the material properties, which is central to the analysis and optimization of devices. In this work, we present a joint experimental-theoretical approach allowing to unambiguously assign the spectral features in the LNT material family through both Raman and IR spectroscopy, as well as to provide an in-depth explanation for the observed scattering efficiencies based on first-principles calculations. The phononic contribution to the static dielectric tensor is calculated from the experimental and theoretical data using the generalized Lyddane-Sachs-Teller relation and compared with the results of the first-principles calculations. The joint methodology can be readily expanded to other materials and serves, e.g., as the basis for studying the role of point defects or doping.

cond-mat.mtrl-sci↗

arXiv2024

Hot electron dynamics in a semiconductor nanowire under intense THz excitation

We report THz-pump / mid-infrared probe near-field studies on Si-doped GaAs-InGaAs core-shell nanowires utilizing THz radiation from the free-electron laser FELBE. Upon THz excitation of free carriers, we observe a red shift of the plasma resonance in both amplitude and phase spectra, which we attribute to the heating up of electrons in the conduction band. The simulation of heated electron distributions anticipates a significant electron population in both L- and X-valleys. The two-temperature model is utilized for a quantitative analysis of the dynamics of the electron gas temperature under THz pumping at various power levels.

cond-mat.mes-hall↗

arXiv2024

Depth resolution in piezoresponse force microscopy

Piezoresponse Force Microscopy (PFM) is one of the most widespread methods for investigating and visualizing ferroelectric domain structures down to the nanometer length scale. PFM makes use of the direct coupling of the piezoelectric response to the crystal lattice, and hence is most often applied to spatially map the 3-dimensional (3D) near-surface domain distribution of any polar or ferroic sample. Nonetheless, since most samples investigated by PFM are at least semiconducting or fully insulating, the electric ac field emerging from the conductive scanning force microscopy (SFM) tip, penetrates the sample, and hence may also couple to polar features that are deeply buried into the bulk of the sample under investigation. Thus, in the work presented here, we experimentally and theoretically explore the contrast and depth resolution capabilities of PFM, by analyzing the dependence of several key parameters. These key parameters include the depth of the buried feature, i.e. here a domain wall (DW), as well as PFM-relevant technical parameters such as the tip radius, the PFM drive voltage and frequency, and the signal-to-noise ratio. The theoretical predictions are experimentally verified using x-cut periodically-poled lithium niobate single crystals that are specially prepared into wedge-shaped samples, in order to allow the buried feature, here the DW, to be `positioned' at any depth into the bulk. This inspection essentially contributes to the fundamental understanding in PFM contrast analysis, and to the reconstruction of 3D domain structures down to a 1-$μ$m-penetration depth into the sample.

physics.app-ph↗

arXiv2024

Comparative study of photo-induced electronic transport along ferroelectric domain walls in lithium niobate single crystals

Ferroelectric domain wall conductivity (DWC) is an intriguing functional property, that can be controlled through external stimuli such as electric and mechanical fields. Optical-field control, as a non-invasive flexible handle, has rarely been applied so far, but significantly expands the possibility for both tuning and probing DWC. On the one hand, as known from Second-Harmonic, Raman, and CARS micro-spectroscopy, the optical in-and-out approach delivers parameters on the DW distribution, the DW inclination, and probes the DW vibrational modes; on the other hand, photons might be applied also to directly generate charge carriers within the DW, hence acting as a functional and spectrally tunable probe to deduce the integral or local absorption properties and bandgaps of conductive DWs. Here, we report on such an optoelectronic approach by investigating the photo-induced DWC (PI-DWC) in DWs of the model system lithium niobate, a material that is well known for hosting conductive DWs. We compare three different crystals containing different numbers of domain walls: (A) none, (B) one, and (C) many conductive DWs. All samples are inspected for their current-voltage (I-V) behavior (i) in darkness, and (ii) for different illumination wavelengths swept from 500 nm down to 310 nm. All samples show their maximum PI-DWC at 310 nm, i.e., at the optical bandgap of lithium niobate; moreover, sample (C) reaches PI-DWCs of several $μ$A. Interestingly, a noticeable PI-DWC is also observed for sub-bandgap illumination, i.e., wavelengths as high as 500 nm, hinting towards the existence and decisive role of electronic in-gap states that contribute to the electronic transport along DWs. Finally, conductive atomic force microscopy (c-AFM) investigations under illumination proved that the PI-DWC is confined to the DW area, and does not originate from photo-induced bulk conductivity.

physics.app-ph↗

arXiv2023

R2D2 -- An equivalent-circuit model that quantitatively describes domain wall conductivity in ferroelectric LiNbO$_3$

Ferroelectric domain wall (DW) conductivity (DWC) can be attributed to two separate mechanisms: (a) the injection/ejection of charge carriers across the Schottky barrier formed at the (metal-) electrode-DW junction and (b) the transport of those charge carriers along the DW. Current-voltage (IU) characteristics, recorded at variable temperatures from LiNbO$_3$ (LNO) DWs, are clearly able to differentiate between these two contributions. Practically, they allow us here to directly quantify the physical parameters relevant for the two mechanisms (a) and (b) mentioned above. These are, e.g., the resistance of the DW, the saturation current, the ideality factor, and the Schottky barrier height of the electrode/DW junction. Furthermore, the activation energies needed to initiate the thermally-activated electronic transport along the DWs, can be extracted. In addition, we show that electronic transport along LiNbO$_3$ DWs can be elegantly viewed and interpreted in an adapted semiconductor picture based on a double-diode/double-resistor equivalent circuit model, the R2D2 model. Finally, our R2D2 model was checked for its universality by fitting the DWC data not only to z-cut LNO bulk DWs, but equally to z-cut thin-film LNO DWs, and DWC from x-cut DWs as reported in literature.

cond-mat.mtrl-sci↗

arXiv2023

Hall mobilities and sheet carrier densities in a single LiNbO$_3$ conductive ferroelectric domain wall

For the last decade, conductive domain walls (CDWs) in single crystals of the uniaxial model ferroelectric lithium niobate (LiNbO$_3$, LNO) have shown to reach resistances more than 10 orders of magnitude lower as compared to the surrounding bulk, with charge carriers being firmly confined to sheets of a few nanometers in width. LNO thus currently witnesses an increased attention since bearing the potential for variably designing room-temperature nanoelectronic circuits and devices based on such CDWs. In this context, the reliable determination of the fundamental transport parameters of LNO CDWs, in particular the 2D charge carrier density $n_{2D}$ and the Hall mobility $μ_{H}$ of the majority carriers, are of highest interest. In this contribution, we present and apply a robust and easy-to-prepare Hall-effect measurement setup by adapting the standard 4-probe van-der-Pauw method to contact a single, hexagonally-shaped domain wall that fully penetrates the 200-$μ$m-thick LNO bulk single crystal. We then determine $n_{2D}$ and $μ_{H}$ for a set of external magnetic fields $B$ and prove the expected cosine-like angular dependence of the Hall voltage. Lastly, we present photo-Hall measurements of one and the same DW, by determining the impact of super-bandgap illumination on the 2D charge carrier density $n_{2D}$.

cond-mat.mtrl-sci↗

arXiv2023

Comparing Transmission- and Epi-BCARS: A Transnational Round Robin on Solid State Materials

Broadband coherent anti-Stokes Raman scattering (BCARS) is an advanced Raman spectroscopy method that combines the spectral sensitivity of spontaneous Raman scattering (SR) with the increased signal intensity of single-frequency coherent Raman techniques. These two features make BCARS particularly suitable for ultra-fast imaging of heterogeneous samples, as already shown in biomedicine. Recent studies demonstrated that BCARS also shows exceptional spectroscopic capabilities when inspecting crystalline materials like lithium niobate and lithium tantalate, and can be used for fast imaging of ferroelectric domain walls. These results strongly suggest the extension of BCARS towards new imaging applications like mapping defects, strain, or dopant levels, similar to standard SR imaging. Despite these advantages, BCARS suffers from a spurious and chemically unspecific non-resonant background (NRB) that distorts and shifts the Raman peaks. Post-processing numerical algorithms are then used to remove the NRB and to obtain spectra comparable to SR results. Here, we show the reproducibility of BCARS by conducting an internal Round Robin with two different BCARS experimental setups, comparing the results on different crystalline materials of increasing structural complexity: diamond, 6H-SiC, KDP, and KTP. First, we compare the detected and phase-retrieved signals, the setup-specific NRB-removal steps, and the mode assignment. Subsequently, we demonstrate the versatility of BCARS by showcasing how the selection of pump wavelength, pulse width, and detection geometry can be tailored to suit the specific objectives of the experiment. Finally, we compare and optimize measurement parameters for the high-speed, hyperspectral imaging of ferroelectric domain walls in lithium niobate.

cond-mat.mtrl-sci↗

arXiv2023

Towards 3D Magnetic Force Microscopy

Magnetic force microscopy (MFM) is long established as a powerful tool for probing the local manifestation of magnetic nanostructures across a range of temperatures and applied stimuli. A major drawback of the technique, however, is that the detection of stray fields emanating from a samples surface rely on a uniaxial vertical cantilever oscillation, and thus are only sensitive to vertically oriented stray field components. The last two decades have shown an ever-increasing literature fascination for exotic topological windings where particular attention to in-plane magnetic moment rotation is highly valuable when identifying and understanding such systems. Here we present a new method of detecting in-plane magnetic stray field components, by utilizing a home made split-electrode excitation piezo that allows the simultaneous excitation of a cantilever at its fundamental flexural and torsional modes. This allows for the joint acquisition of traditional vertical mode (V-MFM) images and a lateral MFM (L-MFM) where the tip-cantilever system is only sensitive to stray fields acting perpendicular to the torsional axis of the cantilever.

physics.ins-det↗

arXiv2023

Polarization sensitivity in scattering-type scanning near-field optical microscopy -- towards nanoellipsometry

Electric field enhancement mediated through sharp tips in scattering-type scanning near-field optical microscopy (s-SNOM) enables optical material analysis down to the 10-nm length scale, and even below. Nevertheless, mostly the out-of-plane electric field component is considered here due to the lightning rod effect of the elongated s-SNOM tip being orders of magnitude stronger as compared to any in-plane field component. Nonetheless, the fundamental understanding of resonantly excited near-field coupled systems clearly allows us to take profit from all vectorial components, especially also from the in-plane ones. In this paper, we theoretically and experimentally explore how linear polarization control of both near-field illumination and detection, can constructively be implemented to (non-)resonantly couple to selected sample permittivity tensor components, e.g. explicitly also to the in-plane directions. When applying the point-dipole model, we show that resonantly excited samples respond with a strong near-field signal, to all linear polarization angles. We then experimentally investigate the polarization-dependent responses for both non-resonant (Au) and phonon-resonant (3C-SiC) sample excitations at a 10.6~$μ$m and 10.7~$μ$m incident wavelength using a tabletop CO$_2$ laser. Varying the illumination polarization angle thus allows for quantitatively comparing the scattered near-field signatures for the two wavelengths. Finally, we compare our experimental data to simulation results, and thus gain the fundamental understanding of the polarization's influence on the near-field interaction. As a result, the near-field components parallel and perpendicular to the sample surface can be easily disentangled and quantified through their polarization signatures, connecting them directly to the sample's local permittivity.

cond-mat.mtrl-sci↗

arXiv2023

Terahertz Twistoptics -- engineering canalized phonon polaritons

The terahertz (THz) frequency range is key to study collective excitations in many crystals and organic molecules. However, due to the large wavelength of THz radiation, the local probing of these excitations in smaller crystalline structures or few-molecular arrangements, requires sophisticated methods to confine THz light down to the nanometer length scale, as well as to manipulate such a confined radiation. For this purpose, in recent years, taking advantage of hyperbolic phonon polaritons (HPhP) in highly anisotropic van der Waals (vdW) materials has emerged as a promising approach, offering a multitude of manipulation options such as control over the wavefront shape and propagation direction. Here, we demonstrate the first THz application of twist-angle-induced HPhP manipulation, designing the propagation of confined THz radiation between 8.39 and 8.98 THz in the vdW material alpha-molybdenum trioxide ($α-MoO_{3}$), hence extending twistoptics to this intriguing frequency range. Our images, recorded by near-field optical microscopy, show the frequency- and twist-angle-dependent change between hyperbolic and elliptic polariton propagation, revealing a polaritonic transition at THz frequencies. As a result, we are able to allocate canalization (highly collimated propagation) of confined THz radiation by carefully adjusting these two parameters, i.e. frequency and twist angle. Specifically, we report polariton canalization in $α-MoO_{3}$ at 8.67 THz for a twist angle of 50°. Our results demonstrate an unprecedented control and the manipulation of highly-confined collective excitations at THz frequencies, offering novel possibilities for nanophotonic applications.

physics.optics↗

arXiv2023

Antiskyrmions and their electrical footprint in crystalline mesoscale structures of Mn$_{1.4}$PtSn

Skyrmionic materials hold the potential for future information technologies, such as racetrack memories. Key to that advancement are systems that exhibit high tunability and scalability, with stored information being easy to read and write by means of all-electrical techniques. Topological magnetic excitations such as skyrmions and antiskyrmions, give rise to a characteristic topological Hall effect. However, the electrical detection of antiskyrmions, in both thin films and bulk samples has been challenging to date. Here, we apply magneto-optical microscopy combined with electrical transport to explore the antiskyrmion phase as it emerges in crystalline mesoscale structures of the Heusler magnet Mn$_{1.4}$PtSn. We reveal the Hall signature of antiskyrmions in line with our theoretical model, comprising anomalous and topological components. We examine its dependence on the vertical device thickness, field orientation, and temperature. Our atomistic simulations and experimental anisotropy studies demonstrate the link between antiskyrmions and a complex magnetism that consists of competing ferromagnetic, antiferromagnetic, and chiral exchange interactions, not captured by micromagnetic simulations.

cond-mat.mtrl-sci↗

arXiv2022

Modeling nonlinear optical interactions of focused beams in bulk crystals and thin films: A phenomenological approach

Coherent nonlinear optical micro-spectroscopy is a frequently used tool in modern material science, as it is sensitive to many different local observables, which comprise, among others, crystal symmetry and vibrational properties. The richness in information, however, may come with challenges in data interpretation, as one has to disentangle the many different effects like multiple reflections, phase jumps at interfaces, or the influence of the Guoy-phase. In order to facilitate interpretation, the work presented here proposes an easy-to-use semi-analytical modeling ansatz, that bases upon known analytical solutions using Gaussian beams. Specifically, we apply this ansatz to compute nonlinear optical responses of (thin film) optical materials. We try to conserve the meaning of intuitive parameters like the Gouy-phase and the nonlinear coherent interaction length. In particular, the concept of coherence length is extended, which is a must when using focal beams. The model is subsequently applied to exemplary cases of second-harmonic and third-harmonic generation. We observe a very good agreement with experimental data and furthermore, despite the constraints and limits of the analytical ansatz, our model performs similarly well as when using more rigorous simulations. However, it outperforms the latter in terms of computational power, requiring more than three orders less computational time and less performant computer systems.

physics.optics↗

arXiv2022

Vibrational properties of LiNbO$_3$ and LiTaO$_3$ under uniaxial stress

Structural strain severely impacts material properties such as the linear and non-linear optical response. Moreover, strain plays a key role, e.g., in the physics of ferroelectrics and in particular of their domain walls. $μ$-Raman spectroscopy is a well-suited technique for the investigation of such strain effects, as it allows to measure the lattice dynamics locally. However, quantifying and reconstructing strain fields from Raman maps requires knowledge on the strain dependence of phonon frequencies. In this work, we have analyzed both theoretically and experimentally the phonon frequencies in the widely used ferroelectrics lithium niobate and lithium tantalate as a function of uniaxial strain via density functional theory and $μ$-Raman spectroscopy. Overall, we find a good agreement between our $ab$ $initio$ models and the experimental data performed with a stress cell. The majority of phonons show an increase in frequency under compressive strain, while the opposite is observed for tensile strains. Moreover, for E-type phonons, we observe the lifting of degeneracy already at moderate strain fields (i.e. at $\pm0.2~\%$) along the x and y directions. This work hence allows for the systematic analysis of 3D strains in modern-type bulk and thin-film devices assembled from lithium niobate and tantalate.

cond-mat.mtrl-sci↗

arXiv2022

Impact of 3D curvature on the polarization orientation in non-Ising domain walls

Ferroelectric domain boundaries are quasi-two-dimensional functional interfaces with high prospects for nanoelectronic applications. Despite their reduced dimensionality, they can exhibit complex non-Ising polarization configurations and unexpected physical properties. Here, the impact of the three-dimensional (3D) curvature on the polarization profile of nominally uncharged 180° domain walls in LiNbO3 is studied using second-harmonic generation microscopy and 3D polarimetry analysis. Correlations between the domain wall curvature and the variation of its internal polarization unfold in the form of modulations of the Néel-like character, which we attribute to the flexoelectric effect. While the Néel-like character originates mainly from the tilting of the domain wall, the internal polarization adjusts its orientation due to the synergetic upshot of dipolar and monopolar bound charges and their variation with the 3D curvature. Our results show that curved interfaces in solid crystals may offer a rich playground for tailoring nanoscale polar states.

cond-mat.mtrl-sci↗

arXiv2022

Tuning the domain wall conductivity in bulk lithium niobate by uniaxial stress

Conductive domain walls (CDWs) in insulating ferroelectrics have recently attracted considerable attention due to their unique topological, optical, and electronic properties, and offer potential applications such as in memory devices or re-writable circuitry. The electronic properties of domain walls (DWs) can be tuned by the application of strain, hence controlling the charge carrier density at DWs. In this work, we study the influence of uniaxial stress on the conductivity of DWs in the bulk single crystal lithium niobate (LiNbO$_3$). Using conductive atomic force microscopy (cAFM), we observe a large asymmetry in the conductivity of DWs, where only negatively screened walls, so called head-to-head DWs, are becoming increasingly conductive, while positively screened, tail-to-tails DWs, show a decrease in conductivity. This asymmetry of DW conductivity agrees with our theoretical model based on the piezoelectric effect. In addition, we observed that the current in the DW increases up to an order of magnitude for smaller compressive stresses of 100 MPa. This response of DWs remained intact for multiple stress cycles over 2 months, opening a path for future applications.

cond-mat.mtrl-sci↗

arXiv2022

Large Hall electron mobilities in head-to-head BaTiO$_3$-domain walls

Strongly charged head-to-head (H2H) domain walls (DWs) that are purposely engineered along the [110] crystallographic orientation into ferroelectric BaTiO$_3$ single crystals have been proposed as novel 2-dimensional electron gases (2DEGs) due to their significant domain wall conductivity (DWC). Here, we quantify these 2DEG properties through dedicated Hall-transport measurements in van-der-Pauw 4-point geometry at room temperature, finding the electron mobility to reach around 400~cm$^2$(Vs)$^{-1}$, while the 2-dimensional charge density amounts to ~7$\times$10$^3$cm$^{-2}$. We underline the necessity to take account of thermal and geometrical-misalignment offset voltages by evaluating the Hall resistance under magnetic-field sweeps, since otherwise dramatic errors of several hundred percent in the derived mobility and charge density values can occur. Apart from the specific characterization of the conducting BaTiO$_3$ DW, we propose the method as an easy and fast way to quantitatively characterize ferroic conducting DWs, complementary to previously proposed scanning-probe-based Hall-potential analyses.

cond-mat.mtrl-sci↗

arXiv2021

Germanium monosulfide as a natural platform for highly anisotropic THz polaritons

Terahertz (THz) electromagnetic radiation is key to optically access collective excitations such as magnons (spins), plasmons (electrons), or phonons (atomic vibrations), thus bridging between optics and solid-state physics. Confinement of THz light to the nanometer length scale is desirable for local probing of such excitations in low dimensional systems, thereby inherently circumventing the large footprint and low spectral density of far-field THz optics. For that purpose, phonon polaritons (PhPs, i.e., light coupled to lattice vibrations in polar crystals) in anisotropic van der Waals (vdW) materials have recently emerged as a promising platform for THz nanooptics; yet the amount of explored, viable materials is still exiguous. Hence, there is a demand for the exploration of novel materials that feature not only THz PhPs at different spectral regimes, but also exhibit unique anisotropic (directional) electrical, thermoelectric, and vibronic properties. To that end, we introduce here the semiconducting alpha-germanium(II) sulfide (GeS) as an intriguing candidate. By employing THz nano-spectroscopy supported by theoretical analysis, we provide a thorough characterization of the different in-plane hyperbolic and elliptical PhP modes in GeS. We find not only PhPs with long life times ($τ$ > 2 ps) and excellent THz light confinement ($λ_0/λ$ > 45), but also an intrinsic, phonon-induced anomalous dispersion as well as signatures of naturally occurring PhP canalization within one single GeS slab.

physics.optics↗