arXiv subjects

M. A. Eriksson

Publications and source records attributed to M. A. Eriksson.

At least 19 recordsLinked to original sources

arXiv2026

Spectroscopy With Intelligent Feature Tracking for automated characterization of excited-state structure in semiconductor quantum dot devices

The characterization of excited-state structure in semiconductor quantum dot (QD) devices is an important component of tuning them for spin-qubit operation. We present Spectroscopy With Intelligent Feature Tracking (SWIFT), a framework that combines machine-learning (ML)-assisted feature identification with physics-informed geometric processing to extract energy-level splittings from pulsed-gate spectroscopy data. SWIFT isolates the relevant spectral features and exploits their characteristic geometry to reduce the two-dimensional spectroscopy analysis to a one-dimensional peak-detection problem. It further combines an ensemble-based confidence metric with sequential accumulation of rapid, low-SNR scans, allowing the inferred spectrum to be reevaluated as experimental evidence accumulates. Using Si/SiGe QD devices, we demonstrate SWIFT both offline and in real time, including automated tracking of QD excited states and lead resonances. Benchmarking on 255 manually labeled scans shows that SWIFT reduces the median splitting error to 0.05 mV from 0.11 mV for a classical baseline, with the largest improvement on lower-quality measurements. These results provide a path toward incorporating excited-state spectroscopy into autonomous QD characterization, tuning, and optimization, which will be essential in large-scale quantum dot devices.

cond-mat.mes-hall↗

arXiv2026

Statistical characterization of valley coupling in Si/SiGe quantum dots via $g$-factor measurements near a valley vortex

The presence of low-energy valley excitations in Si/SiGe heterostructures often causes spin qubits to fail. It is therefore important to develop robust protocols for characterizing the valley coupling. Here, we show that realistically sized samplings of valley energy distributions tend to dramatically overestimate the average valley coupling. But we find that knowledge of the valley phase, in addition to the valley splitting, can significantly improve our estimates. Motivated by this understanding, we propose a novel method to probe the valley phase landscape across the quantum well using simple $g$-factor measurements. An important calibration step in this procedure is to measure $g$ in a loop enclosing a valley vortex, where the valley phase winds by $\pm 2π$ around a zero of the valley splitting. This proposal establishes an important new tool for probing spin qubits, and it can be implemented in current experiments.

cond-mat.mes-hall↗

arXiv2026

Depth-Resolved Lattice Distortions in a Silicon-Germanium Qubit Host

Semiconductor qubits, promising for quantum computation, inherit properties from their host lattice. Quantum dot spins, occupying the local lowest energy states in the conduction band, necessarily couple to structural disorder and interfaces. While silicon-based systems promise low noise alongside industrially compatible manufacturing, the growth of SiGe---a leading platform---unavoidably introduces lattice dislocations, inhomogeneous strain, and crosshatch patterns, expected to cause fluctuations between devices, qubit failure, and subsequently higher operational overhead. Through X-ray nano-structural mapping of an Intel Si/SiGe chip, we reveal, with 30$~$nm lateral and 200$~$nm functional depth resolution, how extended lattice defects introduced during growth propagate through the heterostructure, creating permanently distorted lattice planes and strain. We correlate these at the $\approx1~μ$m scale of a quantum dot device and calculate the impact on qubit energy spectra. We observe crosshatch fine structure and find that substrate miscut and growth correlate with the final crosshatch pattern.

cond-mat.mes-hall↗

arXiv2026

Complete measurement of tunnel- and valley-coupling parameters in a silicon double quantum dot

Tunneling is essential in the initialization, measurement, and control of quantum dot qubits. In silicon, such tunneling connects not only the qubit states but also valley minima in the conduction band on opposite sides of the Brillouin zone, with large consequences for the quantum dot behavior. Here we present a full characterization of the intravalley and intervalley tunnel couplings, including their complex phases -- the valley phases. These phases are shown to control measurable parameters, including the ratios of the gaps at anticrossings between quantum states of a double quantum dot. The valley phases themselves evolve as a function of the quantum dot gate voltages and depend on the underlying atomic structure of the quantum well. Knowledge of the valley phases completes the picture and fills a key gap in our understanding of sample-wide variations of valley couplings and the physical parameters that depend on them, including spin-orbit coupling, valley-orbit mixing, and Landé $g$-factors.

quant-ph↗

arXiv2026

High-fidelity EDSR in Si/SiGe Wiggle Wells

Si/SiGe quantum wells that incorporate Ge concentration oscillations, known as long-period Wiggle Wells, have been shown to enhance the Dresselhaus spin-orbit coupling of conduction-band electrons. Such intrinsic spin-orbit coupling is desirable when performing spin-qubit gate operations based on electric dipole spin resonance (EDSR) because it eliminates the need for external micromagnets. However, random-alloy disorder plays a key role in this materials system by spatially randomizing the valley splitting and the valley phase $ϕ_{s,s}$, and it has not been fully accounted for in recent EDSR analyses. Here, we show that alloy disorder affects EDSR in two main ways. First, the Rabi frequency $Ω$ acquires a dependence on the valley phase, given by $\cosϕ_{s,s}$, which causes spatial randomization of $Ω$. Despite this variability, we show that fast EDSR can be achieved at most locations across a given sample. Second, a new Rabi driving mechanism emerges, enabled by valley dipoles and the hybridization of ground and excited valley states, which arise from alloy disorder and EDSR driving, respectively. This mechanism is dominant in regions of low valley splitting. Alloy disorder can therefore strengthen EDSR, but it can also cause gradients in $Ω$ that lead to dephasing in the rotating frame. We explore this problem by first locating "sweet spots," where EDSR is relatively insensitive to electric-field fluctuations. We then show that high-fidelity Rabi oscillations can be achieved in the presence of realistic charge noise. These results suggest that Wiggle Wells are a promising platform for high-quality, micromagnet-free gate operations.

cond-mat.mes-hall↗

arXiv2026

Individually tunable Si/SiGe quantum dot operating voltages via gate-biased illumination

Semiconductor quantum dot qubits often require very different voltages on each gate to bring them to a correct operating point. Here, we present a method by which one can controllably and repeatably alter the nanoscale trapped charge distribution at an oxide-semiconductor interface. We demonstrate this method on a Si/SiGe quantum dot device, and we find that the operating voltages can be controlled and made much more uniform. The method relies on illumination with near-infrared light in the presence of applied gate voltages, and it enables the tuning of the device operating point on a gate-by-gate basis. We present an explanation of the underlying physics using self-consistent Schrödinger-Poisson simulations. As an application of this method, we tune a triple quantum dot to have uniform and small operating voltages in the (1,1,1) charge configuration. Importantly, we show that shifting the operating voltages in this way does not change the measured charge noise.

cond-mat.mes-hall↗

arXiv2026

Large quantum dot energy level shifts in anomalous photon-assisted tunneling

Orbital energy splittings are important quantum dot parameters for the operation of hole spin qubits. They are known to depend on the lateral confinement of the quantum dots. However, when changing top, plunger gate voltages, which are the typical control parameter for qubit applications, such energy splitting changes are typically negligible, both as measured in experiment and as assumed in effective theories. Here, we study the singlet-triplet (ST) splittings, which depend on the orbital splittings, of a double quantum dot (DQD) in a Ge/SiGe heterostructure using photon-assisted tunneling (PAT) and pulsed-gate spectroscopy. We find that the ST splittings have a surprising, strong dependence on the top gate voltages, leading to anomalous PAT measurements. We combine data from both measurements in a model that well describes the linear gate-voltage dependence of the ST splittings. Finally, we show that the ST splittings of the two dots exhibit similar linear gate-voltage dependences when the device is retuned such that their ratio is significantly different.

cond-mat.mes-hall↗

arXiv2026

Direct measurement of the energy spectrum of a quantum dot qubit

The mapping between gate voltages applied to a double quantum dot, and the parameters of a Hubbard-like Hamiltonian, is of utmost importance for understanding and operating spin qubits. State-of-the-art techniques for measuring Hamiltonian parameters (e.g., detuning axis pulsed spectroscopy, DAPS) provide details about energy levels; however, tunnel coupling estimates typically reveal only a small portion of the full Hamiltonian. Here, we demonstrate a Hamiltonian-agnostic technique for measuring the double dot energy spectrum over a wide energy range, at every value of the detuning, called delta-axis spectroscopy (DAXS). We apply the DAXS method to obtain the energy spectrum of a Si/SiGe double quantum dot and use this data to extract the diagonal and off-diagonal couplings of a 15-level Hubbard-like Hamiltonian, demonstrating very good agreement with the experimental measurements.

quant-ph↗

arXiv2026

Omnidirectional shuttling to avoid valley excitations in Si/SiGe quantum wells

Conveyor-mode shuttling is a key approach for implementing intermediate-range coupling between electron-spin qubits in quantum dots. Initial implementations are encouraging; however, long shuttling trajectories are guaranteed to encounter regions of low conduction-band valley energy splittings, due to the presence of random-alloy disorder in Si/SiGe quantum wells. Here, we theoretically explore two schemes for avoiding valley-state excitations at these valley-splitting minima, by allowing the electrons to detour around them. A multichannel shuttling scheme allows electrons to tunnel between parallel channels, while a two-dimensional (2D) shuttler provides full omnidirectional control. Using simulations, we estimate shuttling fidelities in these two schemes, obtaining a clear preference for the 2D shuttler. Based on such encouraging results, we propose a modular qubit architecture based on 2D shuttling, which enables all-to-all connectivity within qubit plaquettes and high-fidelity communication between different plaquettes.

quant-ph↗

arXiv2026

Single-shot latched readout of a quantum dot qubit using barrier gate pulsing

Latching techniques are widely used to enhance readout of qubits. These methods require precise tuning of multiple tunnel rates, which can be challenging to achieve under realistic experimental conditions, such as when a qubit is coupled to a single reservoir. Here, we present a method for single-shot measurement of a quantum dot qubit with a single reservoir using a latched-readout scheme. Our approach involves pulsing a barrier gate to dynamically control qubit-to-reservoir tunnel rates, a method that is readily applicable to the latched readout of various spin-based qubits. We use this method to enable qubit state latching and to reduce the qubit reset time in measurements of coherent Larmor oscillations of a Si/SiGe quantum dot hybrid qubit.

cond-mat.mes-hall↗

arXiv2026

Valley Splitting Correlations Across a Silicon Quantum Well Containing Germanium

Quantum dots in SiGe/Si/SiGe heterostructures host coherent electron spin qubits, which are promising for future quantum computers. The silicon quantum well hosts near-degenerate electron valley states, creating a low-lying excited state that is known to reduce spin qubit readout and control fidelity. The valley energy splitting is dominated by the microscopic disorder in the SiGe alloy and at the Si/SiGe interfaces, and while Si devices are compatible with large-scale semiconductor manufacturing, achieving a uniformly large valley splitting energy across a many-qubit device spanning mesoscopic distances is an outstanding challenge. In this work we study valley splitting variations in a 1D quantum dot array, formed in a Si$_{0.972}$Ge$_{0.028}$ quantum well, manufactured by Intel. We observe correlations in valley splitting, at both sub-100nm (single gate) and >1$μ$m (device) lengthscales, that are consistent with alloy disorder-dominated theory and simulation. Our results develop the mesoscopic understanding of Si/SiGe heterostructures necessary for scalable device design.

cond-mat.mes-hall↗

arXiv2026

Bootstrapping, autonomous testing, and initialization system for Si/Si$_x$Ge$_{1-x}$ multi-quantum-dot devices

Semiconductor quantum dot (QD) devices have become central to advancements in spin-based quantum computing. However, the increasing complexity of modern QD devices makes calibration and control -- particularly at elevated temperatures -- a bottleneck to progress, highlighting the need for robust and scalable autonomous solutions. A major hurdle arises from trapped charges within the oxide layers, which induce random offset voltage shifts on gate electrodes, with a standard deviation of approximately 83 mV of variation within state-of-the-art present-day devices. Efficient characterization and tuning of large arrays of QD qubits depend on choices of automated protocols. Here, we introduce a physically intuitive framework for a bootstrapping, autonomous testing, and initialization system (BATIS) designed to streamline QD device evaluation and calibration. BATIS navigates high-dimensional gate voltage spaces, automating essential steps such as leakage testing, formation of all current channels, and gate characterization in the presence of trapped charges. For forming the current channels, BATIS follows a non-standard approach that requires a single set of measurements regardless of the number of channels. Demonstrated at 1.3 K on a quad-QD Si/Si$_x$Ge$_{1-x}$ device, BATIS eliminates the need for deep cryogenic environments during initial device diagnostics, significantly enhancing scalability and reducing setup times. By requiring only minimal prior knowledge of the device architecture, BATIS represents a platform-agnostic solution, adaptable to various QD systems, which bridges a critical gap in QD autotuning.

cond-mat.mes-hall↗

arXiv2025

A scanning probe microscopy approach for identifying defects in aluminum oxide

The coherence of quantum dot qubits fabricated in semiconductors is often limited by charge noise from defects in gate dielectrics, which are material- and process-dependent. Characterizing these defects is an important step towards reducing their impact and improving qubit coherence. The identification of individual defects requires atomic-scale spatial resolution, however, and sufficient spectral sensitivity to determine their electronic structure. Electrostatic force microscopy (EFM) provides highly resolved maps of the surface potential of dielectrics, and importantly, is also sensitive to single-electron charging processes that reflect the spectral structure of underlying defects. In this work, we use cryogenic EFM to characterize aluminum oxide grown by atomic layer deposition (ALD) on bulk silicon. These measurements reveal defects close to the surface that exchange electrons with the EFM tip as they transition through different charge states. Detailed electrostatic modeling opens the door to powerful techniques for mapping tip-backgate charging voltages onto defect transition energies, allowing defects such as aluminum vacancies, and carbon, oxygen, or hydrogen impurities to be identified, by comparing to density functional theory (DFT). These results point towards EFM as a powerful tool for exploring defect structures in solid-state qubits.

cond-mat.mes-hall↗

arXiv2025

Fast high-fidelity baseband reset of a latched state for quantum dot qubit readout

A common method for reading out the state of a spin qubit is by latching one logical qubit state, either $|1\rangle$ or $|0\rangle$, onto a different, metastable charge state. Such a latched state can provide a superior charge sensing signal for qubit readout, and it can have a lifetime chosen to be long enough that the charge sensed readout can be high fidelity. However, the passive reset out of latched states is inherently long, which is not desirable. In this work, we demonstrate an on-demand, high fidelity (> 99%) re-initialization of a quantum dot qubit out of a latched readout state. The method is simple to apply as it involves a single baseband voltage pulse to a specific region in the quantum dot stability diagram where the relaxation time from the latched state to the ground state is over 50 times faster. We describe the mechanism for the reset process as well as the boundaries for the optimal reset region in the qubit gate voltage space.

cond-mat.mes-hall↗

arXiv2025

Reducing strain fluctuations in quantum dot devices by gate-layer stacking

Nanofabricated metal gate electrodes are commonly used to confine and control electrons in electrostatically defined quantum dots. However, these same gates impart strain-induced potential fluctuations that can potentially impair device functionality. Here we investigate strain fluctuations in Si/SiGe heterostructures, caused by (i) lattice mismatch, (ii) materials-dependent thermal contraction, and (iii) depositional stress in the metal gates. By simulating gate geometries, ranging from simple to realistically complicated, we identify two opposing effects in overlapping gate structures: (a) gate-driven behavior arising from isolated gates vs (b) oxide-driven behavior arising from the thin oxides separating the gates in an overlapping geometry. These limiting behaviors induce strains of opposite sign, pointing towards the possibility of suppressing strain fluctuations through careful design. Here, we demonstrate nearly total suppression of short-range strain fluctuation through device optimization. These results suggest that strain fluctuations should not pose an insurmountable challenge to qubit uniformity, provided that oxide and overlapping gate thicknesses can be tuned.

cond-mat.mes-hall↗

arXiv2025

Non-equilibrium Dynamics of Two-level Systems directly after Cryogenic Alternating Bias

Two-level systems (TLSs) are tunneling states commonly found in amorphous materials that electrically couple to qubits, resonators, and vibrational modes in materials, leading to energy loss in those systems. Recent studies suggest that applying a large alternating electric field changes the oxide structure, potentially improving the performance of qubits and resonators. In this study, we probe the effect of alternating bias at cryogenic temperatures on TLS dynamics within amorphous oxide parallel-plate capacitors operating in the strongly coupled regime. We bias the TLSs in the capacitors using an electric field. This allows us to spectroscopically image TLSs and extract their densities and dipole moments. When an in-situ alternating bias is applied, the steady-state spectra from the standard TLS model disappear. Post-alternating bias TLS spectroscopy reveals transient behavior, in which the TLS frequency fluctuates on the order of minutes. Thermal cycling above 10 K reverses these effects, restoring the TLS spectrum to its original state, indicating a reversible mechanism. Importantly, the intrinsic loss tangent of the LC oscillator remains unchanged before and after the application of the alternating bias. We propose that the disappearance of the steady-state spectrum are caused by non-equilibrium energy build up from strain in the oxide film introduced by the pulsed voltage bias sequence. Understanding this non-equilibrium energy could inform future models of time-dependent TLS dynamics.

quant-ph↗

arXiv2025

Automation of Quantum Dot Measurement Analysis via Explainable Machine Learning

The rapid development of quantum dot (QD) devices for quantum computing has necessitated more efficient and automated methods for device characterization and tuning. This work demonstrates the feasibility and advantages of applying explainable machine learning techniques to the analysis of quantum dot measurements, paving the way for further advances in automated and transparent QD device tuning. Many of the measurements acquired during the tuning process come in the form of images that need to be properly analyzed to guide the subsequent tuning steps. By design, features present in such images capture certain behaviors or states of the measured QD devices. When considered carefully, such features can aid the control and calibration of QD devices. An important example of such images are so-called $\textit{triangle plots}$, which visually represent current flow and reveal characteristics important for QD device calibration. While image-based classification tools, such as convolutional neural networks (CNNs), can be used to verify whether a given measurement is $\textit{good}$ and thus warrants the initiation of the next phase of tuning, they do not provide any insights into how the device should be adjusted in the case of $\textit{bad}$ images. This is because CNNs sacrifice prediction and model intelligibility for high accuracy. To ameliorate this trade-off, a recent study introduced an image vectorization approach that relies on the Gabor wavelet transform (Schug $\textit{et al.}$ 2024 $\textit{Proc. XAI4Sci: Explainable Machine Learning for Sciences Workshop (AAAI 2024) (Vancouver, Canada)}$ pp 1-6). Here we propose an alternative vectorization method that involves mathematical modeling of synthetic triangles to mimic the experimental data. Using explainable boosting machines, we show that this new method offers superior explainability of model prediction without sacrificing accuracy.

cs.CV↗

arXiv2025

Ultra-dispersive resonator readout of a quantum-dot qubit using longitudinal coupling

We perform readout of a quantum-dot hybrid qubit coupled to a superconducting resonator through a parametric, longitudinal interaction mechanism. Our experiments are performed with the qubit and resonator frequencies detuned by $\sim$10 GHz, demonstrating that longitudinal coupling can facilitate semiconductor qubit operation in the 'ultra-dispersive' regime of circuit quantum electrodynamics.

cond-mat.mes-hall↗