arXiv subjects

M. A. Eriksson

Publications and source records attributed to M. A. Eriksson.

At least 37 records · Page 2Linked to original sources

arXiv2024

On-chip cryogenic multiplexing of Si/SiGe quantum devices

The challenges of operating qubits in a cryogenic environment point to a looming bottleneck for large-scale quantum processors, limited by the number of input-output connections. Classical processors solve this problem via multiplexing; however, on-chip multiplexing circuits have not been shown to have similar benefits for cryogenic quantum devices. In this work we integrate classical circuitry and Si/SiGe quantum devices on the same chip, providing a test bed for qubit scale-up. Our method uses on-chip field-effect transistors (FETs) to multiplex a grid of work zones, achieving a nearly tenfold reduction in control wiring. We leverage this set-up to probe device properties across a 6x6mm$^2$ array of 16 Hall bars. We successfully operate the array at cryogenic temperatures and high magnetic fields where the quantum Hall effect is observed. Building upon these results, we propose a vision for readout in a large-scale silicon quantum processor with a limited number of control connections.

cond-mat.mes-hall↗

arXiv2024

Control of threshold voltages in Si/SiGe quantum devices via optical illumination

Optical illumination of quantum-dot qubit devices at cryogenic temperatures, while not well studied, is often used to recover operating conditions after undesired shocking events or charge injection. Here, we demonstrate systematic threshold voltage shifts in a dopant-free, Si/SiGe field effect transistor using a near infrared (780 nm) laser diode. We find that illumination under an applied gate voltage can be used to set a specific, stable, and reproducible threshold voltage that, over a wide range in gate bias, is equal to that gate bias. Outside this range, the threshold voltage can still be tuned, although the resulting threshold voltage is no longer equal to the applied gate bias during illumination. We present a simple and intuitive model that provides a mechanism for the tunability in gate bias. The model presented also explains why cryogenic illumination is successful at resetting quantum dot qubit devices after undesired charging events.

cond-mat.mes-hall↗

arXiv2024

Coupling conduction-band valleys in SiGe heterostructures via shear strain and Ge concentration oscillations

Engineering conduction-band valley couplings is a key challenge for Si-based spin qubits. Recent work has shown that the most reliable method for enhancing valley couplings entails adding Ge concentration oscillations to the quantum well. However, ultrashort oscillation periods are difficult to grow, while long oscillation periods do not provide useful improvements. Here, we show that the main benefits of short-wavelength oscillations can be achieved in long-wavelength structures through a second-order coupling process involving Brillouin-zone folding induced by shear strain. We finally show that such strain can be achieved through common fabrication techniques, making this an exceptionally promising system for scalable quantum computing.

cond-mat.mes-hall↗

arXiv2024

Practical Strategies for Enhancing the Valley Splitting in Si/SiGe Quantum Wells

Silicon/silicon-germanium heterostructures have many important advantages for hosting spin qubits. However, controlling the valley splitting (the energy splitting between the two low-lying conduction-band valleys) remains a critical challenge for ensuring qubit reliability. Broad distributions of valley splittings are commonplace, even among quantum dots formed on the same chip. In this work, we theoretically explore the interplay between quantum-well imperfections that suppress the valley splitting and cause variability, such as broadened interfaces and atomic steps at the interface, while self-consistently accounting for germanium concentration fluctuations. We consider both conventional and unconventional approaches for controlling the valley splitting, and present concrete strategies for implementing them. Our results provide a clear path for achieving qubit uniformity in a scalable silicon quantum computer.

cond-mat.mes-hall↗

arXiv2023

Longitudinal coupling between a Si/SiGe quantum dot and an off-chip TiN resonator

Superconducting cavities have emerged as a key tool for measuring the spin states of quantum dots. So far however, few experiments have explored longitudinal couplings between dots and cavities, and no solid-state qubit experiments have explicitly probed the "adiabatic" regime, where the Purcell decay is strongly suppressed. Here, we report measurements of a double-quantum-dot charge qubit coupled to a high-impedance resonator via a "flip-chip" design geometry. By applying an adiabatic ac drive to the qubit through two different channels, and studying the effects of qubit energy detuning, interdot tunneling, and driving strength, we are able to unequivocally confirm the presence of a longitudinal coupling between the qubit and cavity, while the qubit remains in its ground state. Since this coupling is proportional to the driving amplitude, and is therefore switchable, it has the potential to become a powerful new tool in qubit experiments.

quant-ph↗

arXiv2023

Spin-orbit enhancement in Si/SiGe heterostructures with oscillating Ge concentration

We show that Ge concentration oscillations within the quantum well region of a Si/SiGe heterostructure can significantly enhance the spin-orbit coupling of the low-energy conduction-band valleys. Specifically, we find that for Ge oscillation wavelengths near $λ= 1.57~\text{nm}$ with an average Ge concentration of $\bar{n}_{\text{Ge}} = 5\%$ in the quantum well region, a Dresselhaus spin-orbit coupling is induced, at all physically relevant electric field strengths, which is over an order of magnitude larger than what is found in conventional Si/SiGe heterostructures without Ge concentration oscillations. This enhancement is caused by the Ge concentration oscillations producing wave-function satellite peaks a distance $2 π/λ$ away in momentum space from each valley, which then couple to the opposite valley through Dresselhaus spin-orbit coupling. Our results indicate that the enhanced spin-orbit coupling can enable fast spin manipulation within Si quantum dots using electric dipole spin resonance in the absence of micromagnets. Indeed, our calculations yield a Rabi frequency $Ω_{\text{Rabi}}/B > 500~\text{MHz/T}$ near the optimal Ge oscillation wavelength $λ= 1.57~\text{nm}$.

cond-mat.mes-hall↗

arXiv2022

SiGe quantum wells with oscillating Ge concentrations for quantum dot qubits

Large-scale arrays of quantum-dot spin qubits in Si/SiGe quantum wells require large or tunable energy splittings of the valley states associated with degenerate conduction band minima. Existing proposals to deterministically enhance the valley splitting rely on sharp interfaces or modifications in the quantum well barriers that can be difficult to grow. Here, we propose and demonstrate a new heterostructure, the "Wiggle Well," whose key feature is Ge concentration oscillations inside the quantum well. Experimentally, we show that placing Ge in the quantum well does not significantly impact our ability to form and manipulate single-electron quantum dots. We further observe large and widely tunable valley splittings, from 54 to 239 ueV. Tight-binding calculations, and the tunability of the valley splitting, indicate that these results can mainly be attributed to random concentration fluctuations that are amplified by the presence of Ge alloy in the heterostructure, as opposed to a deterministic enhancement due to the concentration oscillations. Quantitative predictions for several other heterostructures point to the Wiggle Well as a robust method for reliably enhancing the valley splitting in future qubit devices.

quant-ph↗

arXiv2022

Latched readout for the quantum dot hybrid qubit

A primary method of reading out a quantum dot hybrid qubit involves projection of the logical basis onto distinct charge states that are readily detected by an integrated charge sensing dot. However, in the simplest configuration, the excited charge state decays rapidly, making single-shot readout challenging. Here, we demonstrate a readout procedure where the qubit excited state is latched to a metastable charge configuration whose lifetime is tunnel rate limited, persisting here as long as 2.5 ms. Additionally, we show that working in the (4,1)-(3,2) charge configuration enables a latched readout window that is larger and more tunable than typical charge configurations, because the size of the readout window is determined by an orbital splitting rather than a valley splitting.

cond-mat.mes-hall↗

arXiv2022

Toward Robust Autotuning of Noisy Quantum Dot Devices

The current autotuning approaches for quantum dot (QD) devices, while showing some success, lack an assessment of data reliability. This leads to unexpected failures when noisy or otherwise low-quality data is processed by an autonomous system. In this work, we propose a framework for robust autotuning of QD devices that combines a machine learning (ML) state classifier with a data quality control module. The data quality control module acts as a "gatekeeper" system, ensuring that only reliable data are processed by the state classifier. Lower data quality results in either device recalibration or termination. To train both ML systems, we enhance the QD simulation by incorporating synthetic noise typical of QD experiments. We confirm that the inclusion of synthetic noise in the training of the state classifier significantly improves the performance, resulting in an accuracy of 95.0(9) % when tested on experimental data. We then validate the functionality of the data quality control module by showing that the state classifier performance deteriorates with decreasing data quality, as expected. Our results establish a robust and flexible ML framework for autonomous tuning of noisy QD devices.

quant-ph↗

arXiv2022

How valley-orbit states in silicon quantum dots probe quantum well interfaces

The energies of valley-orbit states in silicon quantum dots are determined by an as yet poorly understood interplay between interface roughness, orbital confinement, and electron interactions. Here, we report measurements of one- and two-electron valley-orbit state energies as the dot potential is modified by changing gate voltages, and we calculate these same energies using full configuration interaction calculations. The results enable an understanding of the interplay between the physical contributions and enable a new probe of the quantum well interface.

cond-mat.mes-hall↗

arXiv2021

Valley splittings in Si/SiGe quantum dots with a germanium spike in the silicon well

Silicon-germanium heterostructures have successfully hosted quantum dot qubits, but the intrinsic near-degeneracy of the two lowest valley states poses an obstacle to high fidelity quantum computing. We present a modification to the Si/SiGe heterostructure by the inclusion of a spike in germanium concentration within the quantum well in order to increase the valley splitting. The heterostructure is grown by chemical vapor deposition and magnetospectroscopy is performed on gate-defined quantum dots to measure the excited state spectrum. We demonstrate a large and widely tunable valley splitting as a function of applied vertical electric field and lateral dot confinement. We further investigate the role of the germanium spike by means of tight-binding simulations in single-electron dots and show a robust doubling of the valley splitting when the spike is present, as compared to a standard (spike-free) heterostructure. This doubling effect is nearly independent of the electric field, germanium content of the spike, and spike location. This experimental evidence of a stable, tunable quantum dot, despite a drastic change to the heterostructure, provides a foundation for future heterostructure modifications.

cond-mat.mes-hall↗

arXiv2021

Magnetic gradient free two axis control of a valley spin qubit in SiGe

Spins in SiGe quantum dots are promising candidates for quantum bits but are also challenging due to the valley degeneracy which could potentially cause spin decoherence and weak spin-orbital coupling. In this work we demonstrate that valley states can serve as an asset that enables two-axis control of a singlet-triplet qubit formed in a double quantum dot without the application of a magnetic field gradient. We measure the valley spectrum in each dot using magnetic field spectroscopy of Zeeman split triplet states. The interdot transition between ground states requires an electron to flip between valleys, which in turn provides a g-factor difference $Δg$ between two dots. This $Δg$ serves as an effective magnetic field gradient and allows for qubit rotations with a rate that increases linearly with an external magnetic field. We measured several interdot transitions and found that this valley introduced $Δg$ is universal and electrically tunable. This could potentially simplify scaling up quantum information processing in the SiGe platform by removing the requirement for magnetic field gradients which are difficult to engineer.

cond-mat.mes-hall↗

arXiv2021

Radio frequency reflectometry in silicon-based quantum dots

RF reflectometry offers a fast and sensitive method for charge sensing and spin readout in gated quantum dots. We focus in this work on the implementation of RF readout in accumulation-mode gate-defined quantum dots, where the large parasitic capacitance poses a challenge. We describe and test two methods for mitigating the effect of the parasitic capacitance, one by on-chip modifications and a second by off-chip changes. We demonstrate that these methods enable high-performance charge readout in Si/SiGe quantum dots, achieving a fidelity of 99.9% for a measurement time of 1 $μ$s.

cond-mat.mes-hall↗

arXiv2020

Dispersive measurement of a semiconductor double quantum dot via 3D integration of a high-impedance TiN resonator

Spins in semiconductor quantum dots are a candidate for cryogenic quantum processors due to their exceptionally long coherence times. One major challenge to scaling quantum dot spin qubits is the dense wiring requirements, making it difficult to envision fabricating large arrays of nearest-neighbor-coupled qubits necessary for error correction. We describe a method to solve this problem by spacing the qubits out using high-impedance superconducting resonators with a 2D grid unit cell area of $0.16~\text{mm}^2$ using 3D integration. To prove the viability of this approach, we demonstrate 3D integration of a high-impedance TiN resonator coupled to a double quantum dot in a Si/SiGe heterostructure. Using the resonator as a dispersive gate sensor, we tune the device down to the single electron regime with an SNR = 5.36 limited by the resonator-dot capacitance. Characterization of the dot and resonator systems shows such integration can be done while maintaining low charge noise metrics for the quantum dots and with improved loaded quality factors for the superconducting resonator ($Q_L = 2.14 \times 10^4$), allowing for high-sensitivity charge detection and the potential for high fidelity 2-qubit gates. This work paves the way for 2D quantum dot qubit arrays with cavity mediated interactions.

cond-mat.mes-hall↗

arXiv2020

Coherent control and spectroscopy of a semiconductor quantum dot Wigner molecule

Multi-electron semiconductor quantum dots have found wide application in qubits, where they enable readout and enhance polarizability. However, coherent control in such dots has typically been restricted to only the lowest two levels, and such control in the strongly interacting regime has not been realized. Here we report quantum control of eight different resonances in a silicon-based quantum dot. We use qubit readout to perform spectroscopy, revealing a dense set of energy levels with characteristic spacing far smaller than the single-particle energy. By comparing with full configuration interaction calculations, we argue that the dense set of levels arises from Wigner-molecule physics.

cond-mat.mes-hall↗

arXiv2020

Fabrication process and failure analysis for robust quantum dots in silicon

We present an improved fabrication process for overlapping aluminum gate quantum dot devices on Si/SiGe heterostructures that incorporates low-temperature inter-gate oxidation, thermal annealing of gate oxide, on-chip electrostatic discharge (ESD) protection, and an optimized interconnect process for thermal budget considerations. This process reduces gate-to-gate leakage, damage from ESD, dewetting of aluminum, and formation of undesired alloys in device interconnects. Additionally, cross-sectional scanning transmission electron microscopy (STEM) images elucidate gate electrode morphology in the active region as device geometry is varied. We show that overlapping aluminum gate layers homogeneously conform to the topology beneath them, independent of gate geometry, and identify critical dimensions in the gate geometry where pattern transfer becomes non-ideal, causing device failure.

physics.app-ph↗

arXiv2020

The effect of external electric fields on silicon with superconducting gallium nano-precipitates

Motivated by potential transformative applications of nanoelectronic circuits that incorporate superconducting elements, and by the advantages of integrating these elements in a silicon materials platform, we investigate the properties of the superconductivity of silicon ion-implanted with gallium. Here we measure 40 different samples and explore both a variety of preparation methods (yielding both superconducting and non-superconducting samples), and the reproducibility of one of the preparation methods yielding superconducting samples. While we find agreement with the existing literature that superconducting effects are visible in this system, we also find that this superconductivity is not influenced by voltages applied to a top gate. The superconductivity in this materials system is not gateable for applied electric fields as large as 8 MV/cm. We also present results of scanning transmission electron microscopy imaging of some of the same samples for which we report electronic characterization. In agreement with the existing literature, we find that the presence of Ga precipitates is essential to the presence of a superconducting transition in these samples. However, we also find evidence for large inhomogeneities in this system, which we discuss in connection with the lack of gateability we report here.

physics.app-ph↗

arXiv2020

Microwave Engineering for Semiconductor Quantum Dots in a cQED Architecture

We develop an engineered microwave environment for coupling high Q superconducting resonators to quantum dots using a multilayer fabrication stack for the dot control wiring. Analytic and numerical models are presented to understand how parasitic capacitive coupling to the dot bias leads can result in microwave energy leakage and low resonator quality factors. We show that by controlling the characteristic impedance of the dot bias wiring, on-chip quality factors of 8140 can be attained without the addition of explicit filtering. Using this approach we demonstrate single electron occupation in double and triple dots detected via dipole or quadrupole coupling to a superconducting resonator. Additionally, by using multilayer fabrication we are able to improve ground plane integrity and keep microwave crosstalk below -20 dB out to 18 GHz while maintaining high wire density which will be necessary for future circuit quantum electrodyanmics (cQED) quantum dot processors.

cond-mat.mes-hall↗