Searcharxiv⌕ Search

arXiv subjects

M. Choi

Publications and source records attributed to M. Choi.

12 recordsLinked to original sources
arXiv2022

Microscopic theory of thermalization in 1D with nonlinear bath coupling

Using a non-perturbative classical model, we numerically investigate the dynamics of mobile particles interacting with an infinite chain of harmonic oscillators, an abstraction of ionic conduction through solid-state materials. We show that coupling between the mobile particles and a single mass of the chain is sufficient to induce dissipation of the mobile particles' energy over a wide range of system parameters. When we introduce thermal fluctuations in the position of the chain mass, the mobile particles exhibit thermalization, eventually reaching the same temperature scale as the chain. This model demonstrates how a minimal set of ingredients can exhibit a link between microscopic motion and macroscopic observables, with computationally efficient simulations. Finally, we suggest some experimental platforms that could realize such a model.

cond-mat.mes-hall↗
arXiv2020

Dust polarized emission observations of NGC 6334; BISTRO reveals the details of the complex but organized magnetic field structure of the high-mass star-forming hub-filament network

[Abridged] Filaments and hubs have received special attention recently thanks to studies showing their role in star formation. While the column density and velocity structures of both filaments and hubs have been studied, their magnetic fields (B-field) are not yet characterized. We aim to understand the role of the B-field in the dynamical evolution of the NGC 6334 hub-filament network. We present new observations of the dust polarized emission at 850$\mu$m towards NGC 6334 obtained with the JCMT/POL-2. We study the distribution and dispersion of the polarized intensity ($PI$), the polarization fraction ($PF$), and the B-field angle ($\theta_{B}$). We derive the power spectrum of the intensity and $\theta_{B}$ along the ridge crest. Our analyses show a complex B-field structure when observed over the whole region ($\sim10$ pc), however, at smaller scales ($\sim1$ pc), $\theta_{B}$ varies coherently along the filaments. The observed power spectrum of $\theta_{B}$ can be well represented with a power law function with a slope $-1.33\pm0.23$, which is $\sim20\%$ shallower than that of $I$. This result is compatible with the properties of simulated filaments and may indicate the processes at play in the formation of filaments. $\theta_{B}$ rotates from being mostly perpendicular to the filament crests to mostly parallel as they merge with the hubs. This variation of $\theta_{B}$ may be tracing local velocity flows of matter in-falling onto the hubs. Our analysis suggests a variation of the energy balance along the crests of these filaments, from magnetically critical/supercritical at their far ends to magnetically subcritical near the hubs. We detect an increase of $PF$ towards the high-column density star cluster-forming hubs that may result from the increase of grain alignment efficiency due to stellar radiation from the newborn stars.

astro-ph.GA↗
arXiv2017

Revisiting Diffusion: Self-similar Solutions and the $t^{-1/2}$ Decay in Initial and Initial-Boundary Value Problems

The diffusion equation is a universal and standard textbook model for partial differential equations (PDEs). In this work, we revisit its solutions, seeking, in particular, self-similar profiles. This problem connects to the classical theory of special functions and, more specifically, to the Hermite as well as the Kummer hypergeometric functions. Reconstructing the solution of the original diffusion model from novel self-similar solutions of the associated self-similar PDE, we infer that the $t^{-1/2}$ decay law of the diffusion amplitude is {\it not necessary}. In particular, it is possible to engineer setups of {\it both} the Cauchy problem and the initial-boundary value problem in which the solution decays at a {\it different rate}. Nevertheless, we observe that the $t^{-1/2}$ rate corresponds to the dominant decay mode among integrable initial data, i.e., ones corresponding to finite mass. Hence, unless the projection to such a mode is eliminated, generically this decay will be the slowest one observed. In initial-boundary value problems, an additional issue that arises is whether the boundary data are \textit{consonant} with the initial data; namely, whether the boundary data agree at all times with the solution of the Cauchy problem associated with the same initial data, when this solution is evaluated at the boundary of the domain. In that case, the power law dictated by the solution of the Cauchy problem will be selected. On the other hand, in the non-consonant cases a decomposition of the problem into a self-similar and a non-self-similar one is seen to be beneficial in obtaining a systematic understanding of the resulting solution.

math.AP↗
arXiv2016

High rate, fast timing Glass RPC for the high η CMS muon detectors

The HL-LHC phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. To achieve this goal in a reasonable time scale the instantaneous luminosity would also increase by an order of magnitude up to $6.10^{34} cm^{-2} s^{-1}$ . The region of the forward muon spectrometer ($|η| > 1.6$) is not equipped with RPC stations. The increase of the expected particles rate up to $2 kHz/cm^{2}$ (including a safety factor 3) motivates the installation of RPC chambers to guarantee redundancy with the CSC chambers already present. The actual RPC technology of CMS cannot sustain the expected background level. The new technology that will be chosen should have a high rate capability and provides a good spatial and timing resolution. A new generation of Glass-RPC (GRPC) using low-resistivity (LR) glass is proposed to equip at least the two most far away of the four high $η$ muon stations of CMS. First the design of small size prototypes and studies of their performance in high-rate particles flux is presented. Then the proposed designs for large size chambers and their fast-timing electronic readout are examined and preliminary results are provided.

physics.ins-det↗
arXiv2016

R&D towards the CMS RPC Phase-2 upgrade

The high pseudo-rapidity region of the CMS muon system is covered by Cathode Strip Chambers (CSC) only and lacks redundant coverage despite the fact that it is a challenging region for muons in terms of backgrounds and momentum resolution. In order to maintain good efficiency for the muon trigger in this region additional RPCs are planned to be installed in the two outermost stations at low angle named RE3/1 and RE4/1. These stations will use RPCs with finer granularity and good timing resolution to mitigate background effects and to increase the redundancy of the system.

physics.ins-det↗
arXiv2016

Performance of Resistive Plate Chambers installed during the first long shutdown of the CMS experiment

The CMS experiment, located at the CERN Large Hadron Collider, has a redundant muon system composed by three different detector technologies: Cathode Strip Chambers (in the forward regions), Drift Tubes (in the central region) and Resistive Plate Chambers (both its central and forward regions). All three are used for muon reconstruction and triggering. During the first long shutdown (LS1) of the LHC (2013-2014) the CMS muon system has been upgraded with 144 newly installed RPCs on the forth forward stations. The new chambers ensure and enhance the muon trigger efficiency in the high luminosity conditions of the LHC Run2. The chambers have been successfully installed and commissioned. The system has been run successfully and experimental data has been collected and analyzed. The performance results of the newly installed RPCs will be presented.

physics.ins-det↗
arXiv2015

A novel application of Fiber Bragg Grating (FBG) sensors in MPGD

We present a novel application of Fiber Bragg Grating (FBG) sensors in the construction and characterisation of Micro Pattern Gaseous Detector (MPGD), with particular attention to the realisation of the largest triple (Gas electron Multiplier) GEM chambers so far operated, the GE1/1 chambers of the CMS experiment at LHC. The GE1/1 CMS project consists of 144 GEM chambers of about 0.5 m2 active area each, employing three GEM foils per chamber, to be installed in the forward region of the CMS endcap during the long shutdown of LHC in 2108-2019. The large active area of each GE1/1 chamber consists of GEM foils that are mechanically stretched in order to secure their flatness and the consequent uniform performance of the GE1/1 chamber across its whole active surface. So far FBGs have been used in high energy physics mainly as high precision positioning and re-positioning sensors and as low cost, easy to mount, low space consuming temperature sensors. FBGs are also commonly used for very precise strain measurements in material studies. In this work we present a novel use of FBGs as flatness and mechanical tensioning sensors applied to the wide GEM foils of the GE1/1 chambers. A network of FBG sensors have been used to determine the optimal mechanical tension applied and to characterise the mechanical tension that should be applied to the foils. We discuss the results of the test done on a full-sized GE1/1 final prototype, the studies done to fully characterise the GEM material, how this information was used to define a standard assembly procedure and possible future developments.

physics.ins-det↗
arXiv2014

Performance of a Large-Area GEM Detector Prototype for the Upgrade of the CMS Muon Endcap System

Gas Electron Multiplier (GEM) technology is being considered for the forward muon upgrade of the CMS experiment in Phase 2 of the CERN LHC. Its first implementation is planned for the GE1/1 system in the $1.5 < \midη\mid < 2.2$ region of the muon endcap mainly to control muon level-1 trigger rates after the second long LHC shutdown. A GE1/1 triple-GEM detector is read out by 3,072 radial strips with 455 $μ$rad pitch arranged in eight $η$-sectors. We assembled a full-size GE1/1 prototype of 1m length at Florida Tech and tested it in 20-120 GeV hadron beams at Fermilab using Ar/CO$_{2}$ 70:30 and the RD51 scalable readout system. Four small GEM detectors with 2-D readout and an average measured azimuthal resolution of 36 $μ$rad provided precise reference tracks. Construction of this largest GEM detector built to-date is described. Strip cluster parameters, detection efficiency, and spatial resolution are studied with position and high voltage scans. The plateau detection efficiency is [97.1 $\pm$ 0.2 (stat)]\%. The azimuthal resolution is found to be [123.5 $\pm$ 1.6 (stat)] $μ$rad when operating in the center of the efficiency plateau and using full pulse height information. The resolution can be slightly improved by $\sim$ 10 $μ$rad when correcting for the bias due to discrete readout strips. The CMS upgrade design calls for readout electronics with binary hit output. When strip clusters are formed correspondingly without charge-weighting and with fixed hit thresholds, a position resolution of [136.8 $\pm$ 2.5 stat] $μ$rad is measured, consistent with the expected resolution of strip-pitch/$\sqrt{12}$ = 131.3 $μ$rad. Other $η$-sectors of the detector show similar response and performance.

physics.ins-det↗
arXiv2006

Examination of Current-Induced Magnetic Field in the Slab Geometry: Possible Origin of Spin Hall Effect

We estimate the strength of current-induced magnetic field (CIMF) in the two-dimensional slab geometry for Spin Hall Effect (SHE) observed recently by Kato et al. and Wunderlich et al. and show that if the factor gm^*/m, where g is the Lande factor and m^* and m are effective and pure masses, respectively, is equal to the numerical value at the surface of the semiconductor, then the CIMF can describe the SHE.

cond-mat.mes-hall↗
arXiv2004

Imaging the Disk around TW Hya with the Submillimeter Array

We present ~2"-4" aperture synthesis observations of the circumstellar disk surrounding the nearby young star TW Hya in the CO J=2--1 and J=3--2 lines and associated dust continuum obtained with the partially completed Submillimeter Array. The extent and peak flux of the 230 and 345 GHz dust emission follow closely the predictions of the irradiated accretion disk model of Calvet et al. (2002). The resolved molecular line emission extends to a radius of at least 200 AU, the full extent of the disk visible in scattered light, and shows a clear pattern of Keplerian rotation. Comparison of the images with 2D Monte Carlo models constrains the disk inclination angle to 7+/-1 degrees. The CO emission is optically thick in both lines, and the kinetic temperature in the line formation region is ~20K. Substantial CO depletion, by an order of magnitude or more from canonical dark cloud values, is required to explain the characteristics of the line emission.

astro-ph↗
arXiv2000

Interferometric observation of the L483 molecular core

We present the aperture synthesis imaging of C3H2 2_{12}-1_{01} and HCO+ 1-0 lines and of continuum emission at 3.4 mm toward the class 0 young stellar object, IRAS 18148-0440 in the L483 molecular cloud. The continuum emission is detected at the IRAS position at a level of 16 mJy, indicating a compact source with a 0.13 solar mass. The C3H2 delineates an envelope near the IRAS position, with a size of 3000 AU x 2000 AU in R.A. and Dec. directions, respectively. A velocity gradient detected only along the axis of outflow can be explained in terms of free-fall motion of the envelope. The HCO+ line wing extends up to the velocity of +- 6 km s^{-1} relative to the systemic one, and the high velocity material shows a symmetric bipolarity and extends over 2' or 0.1 pc along the east-west direction. It is found that the outflow material is clumpy and the opening angle is widest for the slowest moving component. The core component of the HCO+ 1-0 line exhibits an anti-infall asymmetry not only in interferometric but also in single dish observations. It is attributable to the slow isotropic outward motion of gas between the flattened envelope and the collimated outflow.

astro-ph↗