Searcharxiv⌕ Search

arXiv subjects

M. Ferrario

Publications and source records attributed to M. Ferrario.

53 records · Page 3Linked to original sources
arXiv2014

Technical Design Report EuroGammaS proposal for the ELI-NP Gamma beam System

The machine described in this document is an advanced Source of up to 20 MeV Gamma Rays based on Compton back-scattering, i.e. collision of an intense high power laser beam and a high brightness electron beam with maximum kinetic energy of about 720 MeV. Fully equipped with collimation and characterization systems, in order to generate, form and fully measure the physical characteristics of the produced Gamma Ray beam. The quality, i.e. phase space density, of the two colliding beams will be such that the emitted Gamma ray beam is characterized by energy tunability, spectral density, bandwidth, polarization, divergence and brilliance compatible with the requested performances of the ELI-NP user facility, to be built in Romania as the Nuclear Physics oriented Pillar of the European Extreme Light Infrastructure. This document illustrates the Technical Design finally produced by the EuroGammaS Collaboration, after a thorough investigation of the machine expected performances within the constraints imposed by the ELI-NP tender for the Gamma Beam System (ELI-NP-GBS), in terms of available budget, deadlines for machine completion and performance achievement, compatibility with lay-out and characteristics of the planned civil engineering.

physics.acc-ph↗
arXiv2013

IRIDE White Book, An Interdisciplinary Research Infrastructure based on Dual Electron linacs&lasers

This report describes the scientific aims and potentials as well as the preliminary technical design of IRIDE, an innovative tool for multi-disciplinary investigations in a wide field of scientific, technological and industrial applications. IRIDE will be a high intensity 'particle factory', based on a combination of a high duty cycle radio-frequency superconducting electron linac and of high energy lasers. Conceived to provide unique research possibilities for particle physics, for condensed matter physics, chemistry and material science, for structural biology and industrial applications, IRIDE will open completely new research possibilities and advance our knowledge in many branches of science and technology. IRIDE will contribute to open new avenues of discoveries and to address most important riddles: What does matter consist of? What is the structure of proteins that have a fundamental role in life processes? What can we learn from protein structure to improve the treatment of diseases and to design more efficient drugs? But also how does an electronic chip behave under the effect of radiations? How can the heat flow in a large heat exchanger be optimized? The scientific potential of IRIDE is far reaching and justifies the construction of such a large facility in Italy in synergy with the national research institutes and companies and in the framework of the European and international research. It will impact also on R&D work for ILC, FEL, and will be complementarity to other large scale accelerator projects. IRIDE is also intended to be realized in subsequent stages of development depending on the assigned priorities.

physics.ins-det↗
arXiv2011

Coupling of Laser-Generated Electrons with Conventional Accelerator Devices

Laser-based electron acceleration is attracting strong interest from the conventional accelerator community due to its outstanding characteristics in terms of high initial energy, low emittance and high beam current. Unfortunately, such beams are currently not comparable to those of conventional accelerators, limiting their use for the manifold applications that a traditional accelerator can have. Besides working on the plasma source itself, a promising approach to shape the laser-generated beams is coupling them with conventional accelerator elements in order to benefit from both, a versatile electron source and a controllable beam. In this paper we show that some parameters commonly used by the particle accelerator community must be reconsidered when dealing with laser-plasma beams. Starting from the parameters of laser-generated electrons which can be obtained nowadays by conventional multi hundred TW laser systems, we compare different conventional magnetic lattices able to capture and transport those GeV electrons. From this comparison we highlight some important limit of the state-of-the-art plasma generated electrons with respect to conventional accelerator ones. Eventually we discuss an application of such beams in undulators for Free Electron Lasers (FELs), which is one of the most demanding applications in terms of beam quality.

physics.acc-ph↗
arXiv2010

Proposal for taking data with the KLOE-2 detector at the DA$Φ$NE collider upgraded in energy

This document reviews the physics program of the KLOE-2 detector at DA$Φ$NE upgraded in energy and provides a simple solution to run the collider above the $ϕ$-peak (up to 2, possibly 2.5 GeV). It is shown how a precise measurement of the multihadronic cross section in the energy region up to 2 (possibly 2.5) GeV would have a major impact on the tests of the Standard Model through a precise determination of the anomalous magnetic moment of the muon and the effective fine-structure constant at the $M_Z$ scale. With a luminosity of about $10^{32}$cm$^{-2}$s$^{-1}$, DA$Φ$NE upgraded in energy can perform a scan in the region from 1 to 2.5 GeV in one year by collecting an integrated luminosity of 20 pb$^{-1}$ (corresponding to a few days of data taking) for single point, assuming an energy step of 25 MeV. A few years of data taking in this region would provide important tests of QCD and effective theories by $γγ$ physics with open thresholds for pseudo-scalar (like the $η'$), scalar ($f_0,f'_0$, etc...) and axial-vector ($a_1$, etc...) mesons; vector-mesons spectroscopy and baryon form factors; tests of CVC and searches for exotics. In the final part of the document a technical solution for the energy upgrade of DA$Φ$NE is proposed.

hep-ex↗
arXiv2010

Multi-GeV Electron Spectrometer

The advance in laser plasma acceleration techniques pushes the regime of the resulting accelerated particles to higher energies and intensities. In particular the upcoming experiments with the FLAME laser at LNF will enter the GeV regime with almost 1pC of electrons. From the current status of understanding of the acceleration mechanism, relatively large angular and energy spreads are expected. There is therefore the need to develop a device capable to measure the energy of electrons over three orders of magnitude (few MeV to few GeV) under still unknown angular divergences. Within the PlasmonX experiment at LNF a spectrometer is being constructed to perform these measurements. It is made of an electro-magnet and a screen made of scintillating fibers for the measurement of the trajectories of the particles. The large range of operation, the huge number of particles and the need to focus the divergence present unprecedented challenges in the design and construction of such a device. We will present the design considerations for this spectrometer and the first results from a prototype.

physics.ins-det↗
arXiv2010

Teravolt-per-meter plasma wakefields from low-charge, femtosecond electron beams

Recent initiatives in ultra-short, GeV electron beam generation have focused on achieving sub-fs pulses for driving X-ray free-electron lasers (FELs) in single-spike mode. This scheme employs very low charge beams, which may allow existing FEL injectors to produce few-100 as pulses, with high brightness. Towards this end, recent experiments at SLAC have produced ~2 fs rms, low transverse emittance, 20 pC electron pulses. Here we examine use of such pulses to excite plasma wakefields exceeding 1 TV/m. We present a focusing scheme capable of producing ~200 nm beam sizes, where the surface Coulomb fields are also ~TV/m. These conditions access a new regime for high field atomic physics, allowing frontier experiments, including sub-fs plasma formation for wake excitation.

physics.plasm-ph↗
arXiv2006

Design considerations for table-top, laser-based VUV and X-ray free electron lasers

A recent breakthrough in laser-plasma accelerators, based upon ultrashort high-intensity lasers, demonstrated the generation of quasi-monoenergetic GeV-electrons. With future Petawatt lasers ultra-high beam currents of ~100 kA in ~10 fs can be expected, allowing for drastic reduction in the undulator length of free-electron-lasers (FELs). We present a discussion of the key aspects of a table-top FEL design, including energy loss and chirps induced by space-charge and wakefields. These effects become important for an optimized table-top FEL operation. A first proof-of-principle VUV case is considered as well as a table-top X-ray-FEL which may open a brilliant light source also for new ways in clinical diagnostics.

physics.acc-ph↗
arXiv2001

Photoinjector design for the LCLS

The design of the Linac Coherent Light Source assumes that a low-emittance, 1-nC, 10-ps beam will be available for injection into the 15-GeV linac. The proposed rf photocathode injector that will provide a 150-MeV beam with rms normalized emittances of 1 mm in both the transverse and longitudinal dimensions is based on a 1.6-cell S-band rf gun that is equipped with an emittance compensating solenoid. The booster accelerator is positioned at the beam waist coinciding with the first emittance maximum and is provided with an accelerating gradient of ~25 MeV/m, i.e., the "new working point." The uv pulses required for cathode excitation will be generated by tripling the output of a Ti:sapphire laser system consisting of a highly stable cw mode-locked oscillator and two bow-tie amplifiers pumped by a pair of Q-switched Nd:YAG lasers. The large bandwidth of the Ti:sapphire system accommodates the desired temporal pulse shaping. Details of the design and the supporting simulations are presented.

physics.acc-ph↗
arXiv2000

The FaBrE Project at Trieste

A program to design a high brilliance electron source suitable for a short wavelength Linac-based FEL is presented. The goal of the project is to develop a multi-cell integrated photoinjector capable of delivering 1 nC bunches with emittance below 1 mm mrad. This will be the first step toward a possible development of a IV generation light source test facility based on the existing Trieste Linac. For this purpose a common program between Sincrotrone Trieste and INFN-Milano has been undertaken. Here a brief description of the program and the first results of the RF Gun electromagnetic structure with the beam dynamics on the ELETTRA Linac are presented.

physics.acc-ph↗
arXiv2000

Measurement of the temporal response of ferroelectric cathodes

Ferroelectric ceramics are tested as photocathodes at INFN Frascati Laboratories. In order to characterize them for use in linac injectors it is important to measure the temporal shape of the emitted current. With a duration of the laser pulse of 25 ps, the required resolution is a few ps. An apparatus has been set up for the purpose, consisting of a 30 kV electron gun, a microwave deflecting cavity which translates the temporal distribution of the electron bunch into a spatial one, a fluorescent screen on which the deflected beam traces a sector of a circle and various focusing and charge measuring items. The image on the screen is detected via a CCD camera and a frame grabber. We describe the performance of the apparatus and some preliminary temporal distribution measurements.

physics.acc-ph↗
arXiv2000

Superconducting Superstructure for the TESLA Collider: New Results

A new cavity-chain layout has been proposed for the main linac of the TESLA linear collider. This superstructure-layout is based upon four 7-cell superconducting standing-wave cavities, coupled by short beam pipes. The main advantages of the superstructure are an increase in the active accelerating length in TESLA and a saving in rf components, especially power couplers, as compared to the present 9-cell cavities. The proposed scheme allows to handle the field-flatness tuning and the HOM damping at sub-unit level, in contrast to standard multi-cell cavities. The superstructure-layout is extensively studied at DESY since 1999. Computations have been performed for the rf properties of the cavity-chain, the bunch-to-bunch energy spread and multibunch dynamics. A copper model of the superstructure has been built in order to compare with the simulations and for testing the field-profile tuning and the HOM damping scheme. A "proof of principle" niobium prototype of the superstructure is now under construction and will be tested with beam at the TESLA Test Facility in 2001. In this paper we present latest results of these investigations.

physics.acc-ph↗
arXiv2000

The Flat Beam Experiment at the FNAL Photoinjector

A technique for production of an electron beam with a high transverse emittance ratio. a "flat" beam, has been proposed by Brinkmann, Derbenev, and Floettmann.[1] The cathode of an RF-laser gun is immersed in a solenoidal magnetic field; as a result the beam emitted from a round laser spot has a net angular momentum. Subsequent passage through a quadrupole channel that has a 90 degree difference in phase advance between the transverse degrees of freedom results in a flat beam. Experimental study is underway at the Fermilab A0 Photoinjector. Thus far, transverse emittance ratios as high as 50 have been observed, and the results are in substantial agreement with simulation. [1] R. Brinkmann, Ya. Derbenev, K. Floettmann, "A Flat Beam Electron Source for Linear Colliders." TESLA Note 99-09, April 1999.

physics.acc-ph↗
arXiv2000

New Design Study and Related Experimental Program for the LCLS RF Photoinjector

We report the results of a recent beam dynamics study, motivated by the need to redesign the LCLS photoinjector, that lead to the discovery of a new effective working point for a split RF photoinjector. We consider the emittance compensation regime of a space charge beam: by increasing the solenoid strength, the emittance evolution shows a double minimum behavior in the drifting region. If the booster is located where the relative emittance maximum and the envelope waist occur, the second emittance minimum can be shifted to the booster exit and frozen at a very low level (0.3 mm-mrad for a 1 nC flat top bunch), to the extent that the invariant envelope matching conditions are satisfied. Standing Wave Structures or alternatively Traveling Wave Structures embedded in a Long Solenoid are both candidates as booster linac. A careful measurement of the emittance evolution as a function of position in the drifting region is necessary to verify the computation and to determine experimentally the proper position of the booster cavities. The new design study and supporting experimental program under way at the SLAC Gun Test Facility are discussed.

physics.acc-ph↗
arXiv1998

Multi-cell RF Injectors Driven by Thermoionic Cathodes

We present the anticipated performances of a multi-cell RF injector operated either with a thermoionic cathode or with a gated photo-cathode. By means of a magnetic compression and a Coherent Spontaneous Emission seeded FEL radiating at 100 to 200 mm, the system produces a beam fully bunched with a 200 A peak current at 2 mm.mrad rms emittance. The electron bunch is a few FEL buckets long and phase-locked to the RF so to make this device an ideal injector for second generation plasma acceleration experiments.

physics.acc-ph↗
arXiv1998

Multi-Bunch Dynamics in RF Photoinjectors Through an Envelope Equation Approach

Free Electron Lasers driven by Super-Conducting Linacs require the generation, acceleration and transport of trains of bunches with high charge, high repetition rate and low emittance. A numerical model already developed for the modeling of beam dynamics in SC Linacs has been now extended to treat RF guns with proper description of the photocathode bunch generation. The model algorithm is based on a coupled integration of Newton and Maxwell equations under a slowly varying envelope approximation for the time evolution of mode amplitudes in the accelerating structure and an envelope equation description for a set of bunch slices. In this way beam loading effects and higher order modes excitation can be studied. The application to the TTF-FEL injector as a particular design is presented and the optimization according to the invariant envelope concept is discussed, in the frame of single bunch calculations compared to the results of other multi-particle codes.

physics.acc-ph↗
arXiv1998

Superconducting Superstructure for the TESLA Collider

We discuss the new layout of a cavity chain (superstructure) allowing, we hope, significant cost reduction of the RF system of both linacs of the TESLA linear collider. The proposed scheme increases the fill factor and thus makes an effective gradient of an accelerator higher. We present mainly computations we have performed up to now and which encouraged us to order the copper model of the scheme, still keeping in mind that experiments with a beam will be necessary to prove if the proposed solution can be used for the acceleration.

physics.acc-ph↗