arXiv subjects

M. G. Blamire

Publications and source records attributed to M. G. Blamire.

At least 37 records · Page 2Linked to original sources

arXiv2012

Magnetic-coupling-dependent spin-triplet supercurrents in helimagnet/ferromagnet Josephson junctions

The experimental achievements during the past year in demonstrating the existence of long-ranged spin-triplet supercurrents in ferromagnets proximity coupled to singlet superconductors open up the possibility for new interesting physics and applications [for a review, see M. Eschrig, Phys. Today 64(1), 43 (2011)]. Our group reported the injection of triplet supercurrents into a magnetically uniform ferromagnet (Co) by sandwiching it between two helimagnet/superconductor (Ho/Nb) bilayers to form a Nb/Ho/Co/Ho/Nb-type Josephson device. In the function of the Ho layer thicknesses, the supercurrent was found to modulate in a complex way that seemed to depend on the magnetic structure of Ho. To understand this unusual behavior, we have theoretically studied the properties of an ideal Josephson device with a helimagnet/ferromagnet/helimagnet (HM/F/HM) barrier in the clean limit using the Eilenberger equation; we show, in particular, that the maximum triplet supercurrent that can pass across the barrier will depend non-monotonically on the thicknesses of the HM layers if the HM and F layers are magnetically exchange coupled at their interface.

cond-mat.supr-con↗

arXiv2011

Proposal of a one-dimensional electron gas in the steps at the LaAlO$_3$-SrTiO$_3$ interface

The two-dimensional electron gas (2DEG) at the interface between LaAlO$_3$ (LAO) and SrTiO$_3$ (STO) has become one of the most fascinating and highly-debated oxide systems of recent times. Here we propose that a one-dimensional electron gas (1DEG) can be engineered at the step edges of the LAO/STO interface. These predictions are supported by first principles calculations and electrostatic modeling which elucidate the origin of the 1DEG as an electronic reconstruction to compensate a net surface charge in the step edge. The results suggest a novel route to increasing the functional density in these electronic interfaces.

cond-mat.mes-hall↗

arXiv2010

Spin-orbit strength driven crossover between intrinsic and extrinsic mechanisms of the anomalous Hall effect in epitaxial L1o FePd and FePt

We determine the composition of intrinsic as well as extrinsic contributions to the anomalous Hall effect (AHE) in the isoelectronic L1o FePd and FePt alloys. We show that the AHE signal in our 30 nm thick epitaxially deposited films of FePd is mainly due to extrinsic side-jump, while in the epitaxial FePt films of the same thickness and degree of order the intrinsic contribution is dominating over the extrinsic mechanisms of the AHE. We relate this crossover to the difference in spin-orbit strength of Pt and Pd atoms and suggest that this phenomenon can be used for tuning the origins of the AHE in complex alloys.

cond-mat.mes-hall↗

arXiv2009

Critical current of a Josephson junction containing a conical magnet

We calculate the critical current of a superconductor/ferromagnetic/superconductor (S/FM/S) Josephson junction in which the FM layer has a conical magnetic structure composed of an in-plane rotating antiferromagnetic phase and an out-of-plane ferromagnetic component. In view of the realistic electronic properties and magnetic structures that can be formed when conical magnets such as Ho are grown with a polycrystalline structure in thin-film form by methods such as direct current sputtering and evaporation, we have modeled this situation in the dirty limit with a large magnetic coherence length ($ξ_f$). This means that the electron mean free path is much smaller than the normalized spiral length $λ/2π$ which in turn is much smaller than $ξ_f$ (with $λ$ as the length a complete spiral makes along the growth direction of the FM). In this physically reasonable limit we have employed the linearized Usadel equations: we find that the triplet correlations are short ranged and manifested in the critical current as a rapid oscillation on the scale of $λ/2π$. These rapid oscillations in the critical current are superimposed on a slower oscillation which is related to the singlet correlations. Both oscillations decay on the scale of $ξ_f$. We derive an analytical solution and also describe a computational method for obtaining the critical current as a function of the conical magnetic layer thickness.

cond-mat.supr-con↗

arXiv2009

Sudden Critical Current Drops Induced in S/F Structures

In the search for new physical properties of S/F structures, we have found that the superconductor critical current can be controlled by the domain state of the neighboring ferromagnet. The superconductor is a thin wire of thickness d_{s} ~ 2 xi_{S}. Nb/Co and Nb/Py (Permalloy Ni_{80}Fe_{20}) bilayer structures were grown with a significant magnetic anisotropy. Critical current measurements of Nb/Co structures with ferromagnet thickness d_{F} > 30nm show sudden drops in two very defined steps when the measurements are made along the hard axes direction (i.e. current track parallel to hard anisotropy axes direction). These drops disappear when they are made along the easy axis direction or when the ferromagnet thickness is below 30nm. The drops are accompanied by vortex flux flow. In addition magnetorestistance measurements close to Tc show a sharp increase near saturation fields of the ferromagnet. Similar results are reproduced in Nb/Py bilayer structure with the ferromagnet thickness d_{F} ~ 50nm along the easy anisotropy axes. These results are explained as being due to spontaneous vortex formation and flow induced by Bloch domain walls of the ferromagnet underneath. We argue these Bloch domain walls produce a 2D vortex-antivortex lattice structure.

cond-mat.supr-con↗

arXiv2008

Non-equilibrium magnetism in dual spin valves

The field of spin electronics (spintronics) was initiated by the discovery of giant magnetoresistance (GMR) for which Fert[1] and Grunberg[2] were awarded the 2007 Nobel Prize for Physics. GMR arises from differential scattering of the majority and minority spin electrons by a ferromagnet (FM) so that the resistance when the FM layers separated by non-magnetic (NM) spacers are aligned by an applied field is different to when they are antiparallel. In 1996 Slonczewski[3] and Berger[4] predicted that a large spin-polarised current could transfer spin-angular momentum and so exert a spin transfer torque (STT) sufficient to switch thin FM layers between stable magnetisation states[5] and, for even higher current densities, drive continuous precession which emits microwaves[6]. Thus, while GMR is a purely passive phenomenon which ultimately depends on the intrinsic band structure of the FM, STT adds an active element to spintronics by which the direction of the magnetisation may be manipulated. Here we show that highly non-equilibrium spin injection can modify the scattering asymmetry and, by extension, the intrinsic magnetism of a FM. This phenomenon is completely different to STT and provides a third ingredient which should further expand the range of opportunities for the application of spintronics.

cond-mat.mtrl-sci↗

arXiv2008

Parity-dependent proximity effect in superconductor/antiferromagnet heterostructures

We report the effect on the superconducting transition temperature (Tc) of a Nb film proximity coupled to the synthetic antiferromagnet Fe/{Cr/Fe}_(N-1). We find that there is a parity dependence of Tc on the total number of Fe layers, N; locally Tc is always a maximum when N is even, and a minimum when N is odd. The Fe electron mean free path and coherence length are indicative of dirty limit behavior; as such, we numerically model our data using the linearized Usadel equations with good correlation.

cond-mat.supr-con↗

arXiv2008

Spin-transfer switching and low-field precession in exchange-biased spin valve nano-pillars

Using a three-dimensional focused-ion beam lithography process we have fabricated nanopillar devices which show spin transfer torque switching at zero external magnetic fields. Under a small in-plane external bias field, a field-dependent peak in the differential resistance versus current is observed similar to that reported in asymmetrical nanopillar devices. This is interpreted as evidence for the low-field excitation of spin waves which in our case is attributed to a spin-scattering asymmetry enhanced by the IrMn exchange bias layer coupled to a relatively thin CoFe fixed layer.

cond-mat.mtrl-sci↗

arXiv2007

Vortex deformation and breaking in superconductors: A microscopic description

Vortex breaking has been traditionally studied for nonuniform critical current densities, although it may also appear due to nonuniform pinning force distributions. In this article we study the case of a high-pinning/low-pinning/high-pinning layered structure. We have developed an elastic model for describing the deformation of a vortex in these systems in the presence of a uniform transport current density $J$ for any arbitrary orientation of the transport current and the magnetic field. If $J$ is above a certain critical value, $J_c$, the vortex breaks and a finite effective resistance appears. Our model can be applied to some experimental configurations where vortex breaking naturally exists. This is the case for YBa$_2$Cu$_3$O$_{7-x}$ (YBCO) low angle grain boundaries and films on vicinal substrates, where the breaking is experienced by Abrikosov-Josephson vortices (AJV) and Josephson string vortices (SV), respectively. With our model, we have experimentally extracted some intrinsic parameters of the AJV and SV, such as the line tension $ε_l$ and compared it to existing predictions based on the vortex structure.

cond-mat.supr-con↗

arXiv2007

0-pi oscillations in nanostructured Nb/Fe/Nb Josephson junctions

The physics of the $π$ phase shift in ferromagnetic Josephson junctions may enable a range of applications for spin-electronic devices and quantum computing. We investigate transitions from ``0'' to ``$π$'' states in Nb/Fe/Nb Josephson junctions by varying the Fe barrier thickness from 0.5 nm to 5.5 nm. From magnetic measurements we estimate for Fe a magnetic dead layer of about 1.1 nm. By fitting the characteristic voltage oscillations with existing theoretical models we extrapolate an exchange energy of 256 meV, a Fermi velocity of $1.98 \times 10^5$ m/s and an electron mean free path of 6.2 nm, in agreement with other reported values. From the temperature dependence of the $I_CR_N$ product we show that its decay rate exhibits a nonmonotonic oscillatory behavior with the Fe barrier thickness.

cond-mat.supr-con↗

arXiv2006

A new kind of vortex pinning in superconductor / ferromagnet nanocomposites

This paper reports the observation of hysteresis in the vortex pinning in a superconductor / ferromagnetic epitaxial nanocomposite consisting of fcc Gd particles incorporated in a Nb matrix. We show that this hysteretic pinning is associated with magnetic reversal losses in the Gd particles and is fundamentally different in origin to pinning interactions previously observed for ferromagnetic particles or other microstructural features.

cond-mat.supr-con↗

arXiv2006

Critical Current Oscillations in Strong Ferromagnetic Pi-Junctions

We report magnetic and electrical measurements of Nb Josephson junctions with strongly ferromagnetic barriers of Co, Ni and Ni80Fe20 (Py). All these materials show multiple oscillations of critical current with barrier thickness implying repeated 0-pi phase-transitions in the superconducting order parameter. We show in particular that the Co barrier devices can be accurately modelled using existing clean limit theories and so that, despite the high exchange energy (309 meV), the large IcRN value in the pi-state means Co barriers are ideally suited to the practical development of superconducting pi-shift devices.

cond-mat.supr-con↗

arXiv2006

Cross-over between channeling and pinning at twin boundaries in YBa2Cu3O7 thin films

The critical current (Jc) of highly twinned YBa2Cu3O7 films has been measured as a function of temperature, magnetic field and angle. For much of the parameter space we observe a strong suppression of Jc for fields in the twin boundary (TB) directions; this is quantitatively modeled as flux-cutting-mediated vortex channeling. For certain temperatures and fields a cross-over occurs to a regime in which channeling is blocked and the TBs act as planar pinning centers so that TB pinning enhances the overall Jc. In this regime, intrinsic pinning along the TBs is comparable to that between the twins.

cond-mat.supr-con↗

arXiv2005

Strong influence of boron precursor powder on the critical current density of MgB2

The influence of the nature of the boron precursor on the superconducting properties of polycrystalline MgB2 was studied. Critical current densities for the MgB2 made from high purity amorphous boron are at least a factor of three higher than typical values measured for standard MgB2 samples made from amorphous precursors. Two possible mechanisms are proposed to account for this difference. Samples made from crystalline boron powders have around an order of magnitude lower Jc compared to those made from amorphous precursors. X-ray, Tc and resistivity studies indicate that this is as a result of reduced current cross section due to the formation of Mg-B-O phases. The samples made from amorphous B contain far fewer Mg-B-O phases than crystalline B despite the fact that the amorphous B contains more B2O3. The different reactivity rates of the precursor powders accounts for this anomaly.

cond-mat.supr-con↗

arXiv2005

Benefits of current percolation in superconducting coated conductors

The critical currents of MOD/RABiTS and PLD/IBAD coated conductors have been measured as a function of magnetic field orientation and compared to films grown on single crystal substrates. By varying the orientation of magnetic field applied in the plane of the film, we are able to determine the extent to which current flow in each type of conductor is percolative. Standard MOD/RABiTS conductors have also been compared to samples whose grain boundaries have been doped by diffusing Ca from an overlayer. We find that undoped MOD/RABiTS tapes have a less anisotropic in-plane field dependence than PLD/IBAD tapes and that the uniformity of critical current as a function of in-plane field angle is greater for MOD/RABiTS samples doped with Ca.

cond-mat.supr-con↗

arXiv2005

Characteristics of strong ferromagnetic Josephson junctions with epitaxial barriers

We present the measurement of superconductor / ferromagnetic Josephson junctions, based on an epitaxial Nb bottom electrode and epitaxial Fe20Ni80 barrier. Uniform junctions have been fabricated with a barrier thicknesses in the range 2-12 nm. The maximum critical current density ~ 2.4 \pm 0.2 * 10^9 Am^-2 was found for a devices with a 3 nm thick barrier at 4.2 K, corresponding to an average characteristic voltage I_C R_N ~ 16 \muV. The I_C R_N showed a non-monotonic behavior with Fe20Ni80 thickness. The variation of the resistance of a unit area AR_N, of the junctions with barrier thickness gave a Nb/Py specific interface resistance of 6.0 \pm 0.5 fΩm^2 and Fe20Ni80 resistivity of 174 \pm 50 nΩm, consistent with other studies in polycrystalline samples.

cond-mat.supr-con↗

arXiv2004

Controlling the exchange interaction using the spin-flip transition of antiferromagnetic spins in Ni$_{81}$Fe$_{19}$ / $α$-Fe$_2$O$_3$

We report studies of exchange bias and coercivity in ferromagnetic Ni$_{81}$Fe$_{19}$ layers coupled to antiferromagnetic (AF) (0001), (11$\bar{2}$0), and (11$\bar{0}$2) $α$-Fe$_2$O$_3$ layers. We show that AF spin configurations which permit spin-flop coupling give rise to a strong uniaxial anisotropy and hence a large coercivity, and that by annealing in magnetic fields parallel to specific directions in the AF we can control either coercivity or exchange bias. In particular, we show for the first time that a reversible temperature-induced spin reorientation in the AF can be used to control the exchange interaction.

cond-mat.str-el↗

arXiv2004

Normal state properties of high angle grain boundaries in (Y,Ca)Ba2Cu3O7-delta

By lithographically fabricating an optimised Wheatstone bridge geometry, we have been able to make accurate measurements of the resistance of grain boundaries in Y1-xCaxBa2Cu3O7-d between the superconducting transition temperature, Tc, and room temperature. Below Tc the normal state properties were assessed by applying sufficiently high currents. The behaviour of the grain boundary resistance versus temperature and of the conductance versus voltage are discussed in the framework charge transport through a tunnel barrier. The influence of misorientation angle, oxygen content, and calcium doping on the normal state properties is related to changes of the height and shape of the grain boundary potential barrier.

cond-mat.supr-con↗