SearcharxivSearch

arXiv subjects

M. Gabusi

Publications and source records attributed to M. Gabusi.

8 recordsLinked to original sources

EngGPT2: Sovereign, Efficient and Open Intelligence

EngGPT2-16B-A3B is the latest iteration of Engineering Group's Italian LLM and it's built to be a Sovereign, Efficient and Open model. EngGPT2 is trained on 2.5 trillion tokens - less than Qwen3's 36T or Llama3's 15T - and delivers performance on key benchmarks, including MMLU-Pro, GSM8K, IFEval and HumanEval, comparable to dense models in the 8B-16B range, while requiring one-fifth to half of the inference power, and between one-tenth to one-sixth of the training data and consequent needed training power. Designed as a trained-from-scratch Mixture-of-Experts (MoE) architecture, EngGPT2 features 16 billion parameters with 3 billion active per inference, with expert sizes positioned between those used in GPT-OSS and Qwen3. Approximately 25% of its training corpus consists of Italian-language data, to deliver strong capabilities for European and Italian NLP tasks among models of similar scale. This efficiency aims to position EngGPT2 as a key contributor to the growing portfolio of open-weight European models, combining performance and efficiency with full alignment to the EU AI Act. EngGPT2 is also a single model capable of multiple reasoning modes: non-reasoning, reasoning in Italian or English, and turbo-reasoning (a concise, bullet-point style reasoning available in both languages designed for real-time reasoning use cases). EngGPT2 aims to set a new standard for resource-conscious, high-performance LLMs tailored to European and Italian contexts.

cs.CL

Quantum Approaches to Urban Logistics: From Core QAOA to Clustered Scalability

The Traveling Salesman Problem (TSP) is a fundamental challenge in combinatorial optimization, widely applied in logistics and transportation. As the size of TSP instances grows, traditional algorithms often struggle to produce high-quality solutions within reasonable timeframes. This study investigates the potential of the Quantum Approximate Optimization Algorithm (QAOA), a hybrid quantum-classical method, to solve TSP under realistic constraints. We adopt a QUBO-based formulation of TSP that integrates real-world logistical constraints reflecting operational conditions, such as vehicle capacity, road accessibility, and time windows, while ensuring compatibility with the limitations of current quantum hardware. Our experiments are conducted in a simulated environment using high-performance computing (HPC) resources to assess QAOA's performance across different problem sizes and quantum circuit depths. In order to improve scalability, we propose clustering QAOA (Cl-QAOA), a hybrid approach combining classical machine learning with QAOA. This method decomposes large TSP instances into smaller sub-problems, making quantum optimization feasible even on devices with a limited number of qubits. The results offer a comprehensive evaluation of QAOA's strengths and limitations in solving constrained TSP scenarios. This study advances quantum optimization and lays groundwork for future large-scale applications.

quant-ph

Case Study: Transformer-Based Solution for the Automatic Digitization of Gas Plants

The energy transition is a key theme of the last decades to determine a future of eco-sustainability, and an area of such importance cannot disregard digitization, innovation and the new technological tools available. This is the context in which the Generative Artificial Intelligence models described in this paper are positioned, developed by Engineering Ingegneria Informatica SpA in order to automate the plant structures acquisition of SNAM energy infrastructure, a leading gas transportation company in Italy and Europe. The digitization of a gas plant consists in registering all its relevant information through the interpretation of the related documentation. The aim of this work is therefore to design an effective solution based on Artificial Intelligence techniques to automate the extraction of the information necessary for the digitization of a plant, in order to streamline the daily work of MGM users. The solution received the P&ID of the plant as input, each one in pdf format, and uses OCR, Vision LLM, Object Detection, Relational Reasoning and optimization algorithms to return an output consisting of two sets of information: a structured overview of the relevant design data and the hierarchical framework of the plant. To achieve convincing results, we extend a state-of-the-art model for Scene Graph Generation introducing a brand new Transformer architecture with the aim of deepening the analysis of the complex relations between the plant's components. The synergistic use of the listed AI-based technologies allowed to overcome many obstacles arising from the high variety of data, due to the lack of standardization. An accuracy of 91\% has been achieved in the extraction of textual information relating to design data. Regarding the plants topology, 93\% of components are correctly identified and the hierarchical structure is extracted with an accuracy around 80\%.

cs.CV

Multigap RPC time resolution to 511 keV annihilation photons

The time resolution of Multigap Resistive Plate Counters (MRPCs) to $511$ keV gamma rays has been investigated using a $^{22}$Na source and four detectors. The MRPCs time resolution has been derived from the Time-of-Flight information, measured from pairs of space correlated triggered events. A GEANT4 simulation has been performed to analyze possible setup contributions and to support experimental results. A time resolution (FWHM) of $376$ ps and $312$ ps has been measured for a single MRPC with four $250$ $μ$m gas gaps by considering respectively one and two independent pairs of detectors.

physics.ins-det

Simulation of the CMS Resistive Plate Chambers

The Resistive Plate Chamber (RPC) muon subsystem contributes significantly to the formation of the trigger decision and reconstruction of the muon trajectory parameters. Simulation of the RPC response is a crucial part of the entire CMS Monte Carlo software and directly influences the final physical results. An algorithm based on the parametrization of RPC efficiency, noise, cluster size and timing for every strip has been developed. Experimental data obtained from cosmic and proton-proton collisions at $\sqrt{s}=7$ TeV have been used for determination of the parameters. A dedicated validation procedure has been developed. A good agreement between the simulated and experimental data has been achieved.

physics.ins-det

The Upgrade of the CMS RPC System during the First LHC Long Shutdown

The CMS muon system includes in both the barrel and endcap region Resistive Plate Chambers (RPC). They mainly serve as trigger detectors and also improve the reconstruction of muon parameters. Over the years, the instantaneous luminosity of the Large Hadron Collider gradually increases. During the LHC Phase 1 (~first 10 years of operation) an ultimate luminosity is expected above its design value of 10^34/cm^2/s at 14 TeV. To prepare the machine and also the experiments for this, two long shutdown periods are scheduled for 2013-2014 and 2018-2019. The CMS Collaboration is planning several detector upgrades during these long shutdowns. In particular, the muon detection system should be able to maintain a low-pT threshold for an efficient Level-1 Muon Trigger at high particle rates. One of the measures to ensure this, is to extend the present RPC system with the addition of a 4th layer in both endcap regions. During the first long shutdown, these two new stations will be equipped in the region |eta|<1.6 with 144 High Pressure Laminate (HPL) double-gap RPCs operating in avalanche mode, with a similar design as the existing CMS endcap chambers. Here, we present the upgrade plans for the CMS RPC system for the fist long shutdown, including trigger simulation studies for the extended system, and details on the new HPL production, the chamber assembly and the quality control procedures.

physics.ins-det

Uniformity and Stability of the CMS RPC Detector at the LHC

The Resistive Plate Chambers (RPCs) are employed in the CMS experiment at the LHC as dedicated trigger system both in the barrel and in the endcap. This note presents results of the RPC detector uniformity and stability during the 2011 data taking period, and preliminary results obtained with 2012 data. The detector uniformity has been ensured with a dedicated High Voltage scan with LHC collisions, in order to determine the optimal operating working voltage of each individual RPC chamber installed in CMS. Emphasis is given on the procedures and results of the High Voltage calibration. Moreover, an increased detector stability has been obtained by automatically taking into account temperature and atmospheric pressure variations in the CMS cavern.

physics.ins-det

CMS Resistive Plate Chamber overview, from the present system to the upgrade phase I

University of Sofia, Faculty of Physics, Atomic Physics Department, 5, James Bourchier Boulevard, BG-1164 Sofia, Bulgaria Ghent University, Department of Physics and Astronomy, Proeftuinstraat 86, BE-9000 Ghent, Belgium Bulgarian Academy of Sciences, Inst. for Nucl. Res. and Nucl. Energy, Tzarigradsko shaussee Boulevard 72, BG-1784 Sofia, Bulgaria Peking University, Department of Technical Physics, CN-100 871 Beijing, China Universidad de Los Andes, Apartado Aéreo 4976, Carrera 1E, no. 18A 10, CO-Bogotá, Colombia Academy of Scientific Research and Technology of the Arab Republic of Egypt, 101 Sharia Kasr El-Ain, Cairo, Egypt Panjab University, Department of Physics, Chandigarh Mandir 160 014, India Universita e INFN, Sezione di Bari, Via Orabona 4, IT-70126 Bari, Italy INFN, Laboratori Nazionali di Frascati, PO Box 13, Via Enrico Fermi 40, IT-00044 Frascati, Italy Universita e INFN, Sezione di Napoli, Complesso Univ. Monte S. Angelo, Via Cintia, IT-80126 Napoli, Italy Universita e INFN, Sezione di Pavia, Via Bassi 6, IT-Pavia, Italy Department of Physics and Korea Detector Laboratory, Korea University, Aman-dong 5-ga, Sungbuk-gu, Seou,l Republic of Korea Sungkyunkwan University, Department of Physics 2066, Seobu-ro, Jangan-gu, Suwon, Gyeonggi-Do, Republic of Korea

physics.ins-det