arXiv subjects

M. Hoffmann

Publications and source records attributed to M. Hoffmann.

At least 37 records · Page 2Linked to original sources

arXiv2021

Mn-rich MnSb2Te4: A topological insulator with magnetic gap closing at high Curie temperatures of 45-50 K

Ferromagnetic topological insulators exhibit the quantum anomalous Hall effect that might be used for high precision metrology and edge channel spintronics. In conjunction with superconductors, they could host chiral Majorana zero modes which are among the contenders for the realization of topological qubits. Recently, it was discovered that the stable 2+ state of Mn enables the formation of intrinsic magnetic topological insulators with A1B2C4 stoichiometry. However, the first representative, MnBi2Te4, is antiferromagnetic with 25 K Néel temperature and strongly n-doped. Here, we show that p-type MnSb2Te4, previously considered topologically trivial, is a ferromagnetic topological insulator in the case of a few percent of Mn excess. It shows (i) a ferromagnetic hysteresis with record high Curie temperature of 45-50 K, (ii) out-of-plane magnetic anisotropy and (iii) a two-dimensional Dirac cone with the Dirac point close to the Fermi level which features (iv) out-of-plane spin polarization as revealed by photoelectron spectroscopy and (v) a magnetically induced band gap that closes at the Curie temperature as demonstrated by scanning tunneling spectroscopy. Moreover, it displays (vi) a critical exponent of magnetization beta~1, indicating the vicinity of a quantum critical point. Ab initio band structure calculations reveal that the slight excess of Mn that substitutionally replaces Sb atoms provides the ferromagnetic interlayer coupling. Remaining deviations from the ferromagnetic order, likely related to this substitution, open the inverted bulk band gap and render MnSb2Te4 a robust topological insulator and new benchmark for magnetic topological insulators.

cond-mat.mtrl-sci↗

arXiv2021

Topological magnetic materials of the (MnSb$_2$Te$_4$)$\cdot$(Sb$_2$Te$_3$)$_n$ van der Waals compounds family

Combining robust magnetism, strong spin-orbit coupling and unique thickness-dependent properties of van der Waals crystals could enable new spintronics applications. Here, using density functional theory, we propose the (MnSb$_2$Te$_4$)$\cdot$(Sb$_2$Te$_3$)$_n$ family of stoichiometric van der Waals compounds that harbour multiple topologically-nontrivial magnetic phases. In the groundstate, the first three members of the family, i.e. MnSb$_2$Te$_4$, ($n=0$), MnSb$_4$Te$_7$, ($n=1$), and MnSb$_6$Te$_{10}$, ($n=2$), are 3D antiferromagnetic topological insulators (AFMTIs), while for $n \geq 3$ a special phase is formed, in which a nontrivial topological order coexists with a partial magnetic disorder in the system of the decoupled 2D ferromagnets, whose magnetizations point randomly along the third direction. Furthermore, due to a weak interlayer exchange coupling, these materials can be field-driven into the FM Weyl semimetal ($n=0$) or FM axion insulator states ($n \geq 1$). Finally, in two dimensions we reveal these systems to show intrinsic quantum anomalous Hall and AFM axion insulator states, as well as quantum Hall state, achieved under external magnetic field, but without Landau levels. Our results provide a solid computational proof that MnSb$_2$Te$_4$, is not topologically trivial as was previously believed that opens possibilities of realization of a wealth of topologically-nontrivial states in the (MnSb$_2$Te$_4$)$\cdot$(Sb$_2$Te$_3$)$_n$ family.

cond-mat.mtrl-sci↗

arXiv2020

A quantum heat engine based on dynamical materials design

We propose a novel type of quantum heat engine based on the ultrafast dynamical control of the magnetic properties of a nano-scale working body. The working principle relies on nonlinear phononics, an example for dynamical materials design. We describe the general recipe for identifying candidate materials, and also propose Cr$_{2}$O$_{3}$ as a promising working body for a quantum Otto cycle. Using a spin Hamiltonian as a model for Cr$_{2}$O$_{3}$, we investigate the performance in terms of efficiency, output power, and quantum friction. To assess the assumptions underlying our effective spin Hamiltonian we also consider a working substance composed of several unit cells. We show that even without an implementation of transitionless driving, the quantum friction is very low compared to the total produced work and the energy cost of counterdiabatic driving is negligible. This is an advantage of the working substance, as experimentally hard-to-implement shortcuts to adiabaticity are not needed. Moreover, we discuss some remarkable thermodynamic features due to the quantumness of the proposed system such as a non-monotonic dependence of the efficiency on the temperature of the hot-bath. Finally, we explore the dependence of the performance on the system parameters for a generic model of this type of quantum heat engine and identify properties of the energy spectrum required for a well-performing quantum heat engine.

cond-mat.stat-mech↗

arXiv2019

Preserving orbital order in a layered manganite by ultrafast hybridized band excitation

In the mixed-valence manganites, a near-infrared laser typically melts the orbital and spin order simultaneously, corresponding to the photoinduced $d^{1}d^{0}$ $\xrightarrow{}$ $d^{0}d^{1}$ excitations in the Mott-Hubbard bands of manganese. Here, we use ultrafast methods -- both femtosecond resonant x-ray diffraction and optical reflectivity -- to demonstrate that the orbital response in the layered manganite Nd$_{1-x}$Sr$_{1+x}$MnO$_{4}$ ($\it{x}$ = 2/3) does not follow this scheme. At the photoexcitation saturation fluence, the orbital order is only diminished by a few percent in the transient state. Instead of the typical $d^{1}d^{0}$ $\xrightarrow{}$ $d^{0}d^{1}$ transition, a near-infrared pump in this compound promotes a fundamentally distinct mechanism of charge transfer, the $d^{0}$ $ \xrightarrow{}$ $d^{1}L$, where $\it{L}$ denotes a hole in the oxygen band. This novel finding may pave a new avenue for selectively manipulating specific types of order in complex materials of this class.

cond-mat.str-el↗

arXiv2019

Variety of magnetic topological phases in the (MnBi$_2$Te$_4$)(Bi$_2$Te$_3$)$_m$ family

Quantum states of matter combining non-trivial topology and magnetism attract a lot of attention nowadays; the special focus is on magnetic topological insulators (MTIs) featuring quantum anomalous Hall and axion insulator phases. Feasibility of many novel phenomena that \emph{intrinsic} magnetic TIs may host depends crucially on our ability to engineer and efficiently tune their electronic and magnetic structures. Here, using angle- and spin-resolved photoemission spectroscopy along with \emph{ab initio} calculations we report on a large family of intrinsic magnetic TIs in the homologous series of the van der Waals compounds (MnBi$_2$Te$_4$)(Bi$_2$Te$_3$)$_m$ with $m=0, ..., 6$. Magnetic, electronic and, consequently, topological properties of these materials depend strongly on the $m$ value and are thus highly tunable. The antiferromagnetic (AFM) coupling between the neighboring Mn layers strongly weakens on moving from MnBi2Te4 (m=0) to MnBi4Te7 (m=1), changes to ferromagnetic (FM) one in MnBi6Te10 (m=2) and disappears with further increase in m. In this way, the AFM and FM TI states are respectively realized in the $m=0,1$ and $m=2$ cases, while for $m \ge 3$ a novel and hitherto-unknown topologically-nontrivial phase arises, in which below the corresponding critical temperature the magnetizations of the non-interacting 2D ferromagnets, formed by the \MBT\, building blocks, are disordered along the third direction. The variety of intrinsic magnetic TI phases in (MnBi$_2$Te$_4$)(Bi$_2$Te$_3$)$_m$ allows efficient engineering of functional van der Waals heterostructures for topological quantum computation, as well as antiferromagnetic and 2D spintronics.

cond-mat.mtrl-sci↗

arXiv2019

Ab initio analysis of magnetic properties of prototype B20 chiral magnet FeGe

FeGe in the B20 phase is an experimentally well-studied prototypical chiral magnet exhibiting helical spirals, skyrmion lattices and individual skyrmions with a robust length of 70~nm. While the helical spiral ground state can be verified by first-principles calculations based on density functional theory, this feature size could not be reproduced even approximately. To develop a coherent picture of the discrepancy between experiment and theory, we investigate in this work the magnetic properties of FeGe from first-principles using different electronic-structure methods. We study atomistic as well as micromagnetic parameters describing exchange and Dzyaloshinskii-Moriya interactions, and discuss their subtle dependence on computational, structural, and correlation parameters. In particular, we quantify how these magnetic properties are affected by changes of the lattice parameter, different atomic arrangements, exchange and correlation effects, finite Fermi-function broadening, and momentum-space sampling. In addition, we use the obtained atomistic parameters to determine the corresponding Curie temperature, which agrees well with experiments. Our results indicate that the well-known and well-accepted relation between the micromagnetic parameters and the period of the helical structure, is not valid for FeGe. This calls for new experiments exploring the relation by measuring independently the spin stiffness, the spiralization and the period of the helical spin spiral.

cond-mat.mtrl-sci↗

arXiv2019

Letter of Intent for the LUXE Experiment

This Letter of Intent describes LUXE (Laser Und XFEL Experiment), an experiment that aims to use the high-quality and high-energy electron beam of the European XFEL and a powerful laser. The scientific objective of the experiment is to study quantum electrodynamics processes in the regime of strong fields. High-energy electrons, accelerated by the European XFEL linear accelerator, and high-energy photons, produced via Bremsstrahlung of those beam electrons, colliding with a laser beam shall experience an electric field up to three times larger than the Schwinger critical field (the field at which the vacuum itself is expected to become unstable and spark with spontaneous creation of electron-positron pairs) and access a new regime of quantum physics. The processes to be investigated, which include nonlinear Compton scattering and nonlinear Breit-Wheeler pair production, are relevant to a variety of phenomena in Nature, e.g. in the areas of astrophysics and collider physics and complement recent results in atomic physics. The setup requires in particular the extraction of a minute fraction of the electron bunches from the European XFEL accelerator, the installation of a powerful laser with sophisticated diagnostics, and an array of precision detectors optimised to measure electrons, positrons and photons. Physics sensitivity projections based on simulations are also provided.

physics.ins-det↗

arXiv2018

Toward safe separation distance monitoring from RGB-D sensors in human-robot interaction

The interaction of humans and robots in less constrained environments gains a lot of attention lately and the safety of such interaction is of utmost importance. Two ways of risk assessment are prescribed by recent safety standards: (i) power and force limiting and (ii) speed and separation monitoring. Unlike typical solutions in the industry that are restricted to mere safety zone monitoring, we present a framework that realizes separation distance monitoring between a robot and a human operator in a detailed, yet versatile, transparent, and tunable fashion. The separation distance is assessed pair-wise for all keypoints on the robot and the human body and as such can be selectively modified to account for specific conditions. The operation of this framework is illustrated on a Nao humanoid robot interacting with a human partner perceived by a RealSense RGB-D sensor and employing the OpenPose human skeleton estimation algorithm.

cs.RO↗

arXiv2018

Spectral properties and geology of bright and dark material on dwarf planet Ceres

Variations and spatial distributions of bright and dark material on dwarf planet Ceres play a key role in understanding the processes that have led to its present surface composition. We define limits for bright and dark material in order to distinguish them consistently, based on the reflectance of the average surface using Dawn Framing Camera data. A systematic classification of four types of bright material is presented based on their spectral properties, composition, spatial distribution, and association with specific geomorphological features. We found obvious correlations of reflectance with spectral shape (slopes) and age; however, this is not unique throughout the bright spots. Although impact features show generally more extreme reflectance variations, several areas can only be understood in terms of inhomogeneous distribution of composition as inferred from Dawn Visible and Infrared Spectrometer data. Additional material with anomalous composition and spectral properties are rare. The identification of the composition and origin of the dark, particularly the darkest material, remains to be explored. The spectral properties and the morphology of the dark sites suggest an endogenic origin, but it is not clear whether they are more or less primitive surficial exposures or excavated subsurface but localized material. The reflectance, spectral properties, inferred composition, and geologic context collectively suggest that the bright and dark material tends to gradually change toward the average surface over time. This could be because of multiple processes, i.e., impact gardening/space weathering, and lateral mixing, including thermal and aqueous alteration, accompanied by changes in composition and physical properties such as grain size, surface temperature, and porosity (compaction).

astro-ph.EP↗

arXiv2017

Test Beam Performance Measurements for the Phase I Upgrade of the CMS Pixel Detector

A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator thresholds. In this paper, comprehensive test beam studies are presented, which have been conducted to verify the design and to quantify the performance of the new detector assemblies in terms of tracking efficiency and spatial resolution. Under optimal conditions, the tracking efficiency is $99.95\pm0.05\,\%$, while the intrinsic spatial resolutions are $4.80\pm0.25\,μ\mathrm{m}$ and $7.99\pm0.21\,μ\mathrm{m}$ along the $100\,μ\mathrm{m}$ and $150\,μ\mathrm{m}$ pixel pitch, respectively. The findings are compared to a detailed Monte Carlo simulation of the pixel detector and good agreement is found.

physics.ins-det↗

arXiv2017

Haze at Occator crater on dwarf planet Ceres

A diurnal varying haze layer at the bright spots of Occator on dwarf planet Ceres has been reported from images of the Dawn Framing Camera. This finding is supported by ground-based observations revealing diurnal albedo changes at Occator's longitude. In the present work, we further investigate the previously reported haze phenomenon in more detail using additional Framing Camera images. We demonstrate that the light scattering behavior at the central floor of Occator is different compared to a typical cerean surface and is likely inconsistent with a pure solid surface scatterer. The identified deviation is best explained by an additional component to the scattered light of the surface, i.e., a haze layer. Our results support the water vapor detection by Herschel observations though the existence of a tenuous cerean exosphere is not yet confirmed.

astro-ph.EP↗

arXiv2015

Photoinduced suppression of the ferroelectric instability in PbTe

The interactions between electrons and phonons drive a large array of technologically relevant material properties including ferroelectricity, thermoelectricity, and phase-change behaviour. In the case of many group IV-VI, V, and related materials, these interactions are strong and the materials exist near electronic and structural phase transitions. Their close proximity to phase instability produces a fragile balance among the various properties. The prototypical example is PbTe whose incipient ferroelectric behaviour has been associated with large phonon anharmonicity and thermoelectricity. Experimental measurements on PbTe reveal anomalous lattice dynamics, especially in the soft transverse optical phonon branch. This has been interpreted in terms of both giant anharmonicity and local symmetry breaking due to off-centering of the Pb ions. The observed anomalies have prompted renewed theoretical and computational interest, which has in turn revived focus on the extent that electron-phonon interactions drive lattice instabilities in PbTe and related materials. Here, we use Fourier-transform inelastic x-ray scattering (FT-IXS) to show that photo-injection of free carriers stabilizes the paraelectric state. With support from constrained density functional theory (CDFT) calculations, we find that photoexcitation weakens the long-range forces along the cubic direction tied to resonant bonding and incipient ferroelectricity. This demonstrates the importance of electronic states near the band edges in determining the equilibrium structure.

cond-mat.mtrl-sci↗

arXiv2015

Study of electronic and magnetic properties and related x-ray absorption spectroscopy of ultrathin Co films on BaTiO$_3$

We present a first-principles study of electronic and magnetic properties of thin Co films on a BaTiO$_3$(001) single crystal. The crystalline structure of 1, 2, and 3 monolayer thick Co films was determined and served as input for calculations of the electronic and magnetic properties of the films. The estimation of exchange constants indicates that the Co films are ferromagnetic with a high critical temperature, which depends on the film thickness and the interface geometry. In addition, we calculated x-ray absorption spectra, related magnetic circular dichroism (XMCD) and linear dichroism (XLD) of the Co L$_{2,3}$ edges as a function of Co film thickness and ferroelectric polarization of BaTiO$_3$. We found characteristic features, which depend strongly on the magnetic properties and the structure of the film. While there is only a weak dependence of XMCD spectra on the ferroelectric polarization, the XLD of the films is much more sensitive to the polarization switching, which could possibly be observed experimentally.

cond-mat.mtrl-sci↗

arXiv2015

Study of the Negative Magneto-Resistance of Single Proton-Implanted Lithium-Doped ZnO Microwires

The magneto-transport properties of single proton-implanted ZnO and of Li(7\%)-doped ZnO microwires have been studied. The as-grown microwires were highly insulating and not magnetic. After proton implantation the Li(7\%) doped ZnO microwires showed a non monotonous behavior of the negative magneto-resistance (MR) at temperature above 150 K. This is in contrast to the monotonous NMR observed below 50 K for proton-implanted ZnO. The observed difference in the transport properties of the wires is related to the amount of stable Zn vacancies created at the near surface region by the proton implantation and Li doping. The magnetic field dependence of the resistance might be explained by the formation of a magnetic/non magnetic heterostructure in the wire after proton implantation.

cond-mat.mtrl-sci↗

arXiv2015

Novel type of atomic-scale spin lattice at a surface and its emergent Hall effect

We predict the occurrence of a novel type of atomic-scale spin lattice in an Fe monolayer on the Ir(001) surface. Based on density functional theory calculations we parametrize a spin Hamiltonian and solve it numerically using Monte-Carlo simulations. We find the stabilization of a three-dimensional spin structure arranged on a 3x3 lattice. Despite an almost vanishing total magnetization we predict the emergence of a large anomalous Hall effect, to which there is a significant topological contribution purely due to the real space spin texture at the surface.

cond-mat.mes-hall↗

arXiv2015

The Spatial Variation of the Cooling Lines in the Reflection Nebula NGC7023

Context: The north-west photo-dissociation region (PDR) in the reflection nebula NGC 7023 displays a complex structure. Filament-like condensations at the edge of the cloud can be traced via the emission of the main cooling lines, offering a great opportunity to study the link between the morphology and energetics of these regions. Aims: We study the spatial variation of the far-infrared fine-structure lines of [C II] (158 um) and [O I] (63 and 145 um). These lines trace the local gas conditions across the PDR. Methods: We used observations from the Herschel/PACS instrument to map the spatial distribution of these fine-structure lines. The observed region covers a square area of about 110" x 110" with an angular resolution that varies from 4" to 11". We compared this emission with ground-based and Spitzer observations of H2 lines, Herschel/SPIRE observations of CO lines, and Spitzer/IRAC 3.6 um images that trace the emission of polycyclic aromatic hydrocarbons. Results: The [C II] (158 um) and [O I] (63 and 145 um) lines arise from the warm cloud surface where the PDR is located and the gas is warm, cooling the region. We find that although the relative contribution to the cooling budget over the observed region is dominated by [O I]63 um (>30%), H2 contributes significantly in the PDR (35%), as does [C II]158 um outside the PDR (30%). Other species contribute little to the cooling ([O I]145 um 9%, and CO 4%). The [O I] maps resolve these condensations into two structures and show that the peak of [O I] is slightly displaced from the molecular H2 emission. The size of these structures is about 8" (0.015 pc) and in surface cover about 9% of the PDR emission. Finally, we did not detect emission from [N II]122 um, suggesting that the cavity is mostly filled with non-ionised gas.

astro-ph.GA↗

arXiv2014

Simultaneous whole-animal 3D-imaging of neuronal activity using light field microscopy

3D functional imaging of neuronal activity in entire organisms at single cell level and physiologically relevant time scales faces major obstacles due to trade-offs between the size of the imaged volumes, and spatial and temporal resolution. Here, using light-field microscopy in combination with 3D deconvolution, we demonstrate intrinsically simultaneous volumetric functional imaging of neuronal population activity at single neuron resolution for an entire organism, the nematode Caenorhabditis elegans. The simplicity of our technique and possibility of the integration into epi-fluoresence microscopes makes it an attractive tool for high-speed volumetric calcium imaging.

physics.optics↗

arXiv2013

Strain induced superconductivity in the parent compound BaFe2As2

The discovery of superconductivity (SC) with a transition temperature, Tc, up to 65K in single-layer FeSe (bulk Tc =8K) films grown on SrTiO3 substrates has attracted special attention to Fe-based thin films. The high Tc is a consequence of the combined effect of electron transfer from the oxygen-vacant substrate to the FeSe thin film and lattice tensile strain. Here we demonstrate the realization of SC in the parent compound BaFe2As2 (no bulk Tc) just by tensile lattice strain without charge doping. We investigate the interplay between strain and SC in epitaxial BaFe2As2 thin films on Fe-buffered MgAl2O4 single crystalline substrates. The strong interfacial bonding between Fe and the FeAs sublattice increases the Fe-Fe distance due to the lattice misfit which leads to a suppression of the antiferromagnetic spin density wave and induces SC with bulk-Tc ?10K. These results highlight the role of structural changes in controlling the phase diagram of Fe-based superconductors.

cond-mat.supr-con↗