Searcharxiv⌕ Search

arXiv subjects

M. J. Sánchez

Publications and source records attributed to M. J. Sánchez.

At least 19 recordsLinked to original sources

Engineering Synaptic Dynamics in Ag-Modified TaO$_x$ Memristive Devices

Engineering not only the magnitude but also the dynamics of synaptic weight updates is an important challenge for memristive neuromorphic hardware. Here, we show that Ag modification of TaO$_x$ memristors introduces an electrically selectable degree of freedom in synaptic depression through the interplay between Ag-related and oxygen-vacancy dynamics. Reference devices exhibit conventional bipolar switching, whereas Ag-modified devices display symmetric table-with-legs hysteresis loops, metastable intermediate states, and a strongly non-monotonic dependence of depression dynamics on programming amplitude. By varying only the pulse amplitude, the same device can be driven among three regimes: gradual sigmoidal depression, an abrupt update concentrated within a few pulses, and a broadly distributed evolution extending over more than one hundred pulses. A minimal coupled-state model, in which a vacancy-related switching variable interacts with a slower Ag-related internal degree of freedom, reproduces this gradual--abrupt--gradual crossover using two individually monotonic field-activated processes. The functional impact is assessed in a memristor-based multilayer perceptron. For MNIST, the abrupt, sigmoidal, and slowly evolving responses yield accuracies of approximately 50%, 85%, and 88%, respectively, while the gradual regime reaches approximately 72% for Fashion-MNIST. These results show that coupling Ag-related and oxygen-vacancy dynamics can transform synaptic depression from a fixed device characteristic into an electrically programmable property.

cond-mat.mtrl-sci↗

Tuning the memristive response of TaO$_x$-based devices with Ag Nanoparticles

Defect engineering is a key strategy to control resistive switching (RS) in oxide-based memristive devices, where oxygen vacancy (OV) dynamics governs filament formation and rupture. We investigate the effect of Ag nanoparticles (AgNPs) embedded in the top electrode of Pt/Ta2O5/TaO2/Pt memristors and analyze their RS behavior and statistical stability. Devices without AgNPs exhibit two hysteresis switching loops (HSLs) with opposite chiralities, originating from the participation of the Pt/Ta2O5 top interface and the Ta2O5/TaO2 bottom interface. Incorporating AgNPs reduces the overall device resistance and selectively suppresses one loop, yielding a single, well-defined switching mode. Moreover, devices incorporating Ag-NPs show markedly reduced cycle-to-cycle variability of the high-resistance state, as confirmed by Weibull analysis, indicating improved endurance and switching reproducibility. Within a filamentary RS framework, we attribute this behavior to local metallization of the top interface by AgNPs, which partially inhibit OV transport and confines the RS dynamics to the bottom interface. Numerical simulations with the Oxygen Vacancy Resistive Network (OVRN) model succesfully reproduce the experimental HSLs, statistical trends, and tunable ON/OFF ratios with AgNPs coverage. These findings demonstrate that targeted interface metallization via metallic nanoparticles provides an effective route to control multi-interface RS dynamics and improve switching stability in without modifying the oxide architecture.

cond-mat.mes-hall↗

On the origin of filamentary resistive switching in oxides-based memristive devices

The control and manipulation of filamentary resistive switching (FRS) is essential for practical applications in fields like non-volatile memories and neuromorphic computing. However, key aspects of the dynamics of conductive filament formation and their influence on device resistance remain incompletely understood. In this work we study FRS in binary oxides based memristors by investigating the dynamics of oxygen vacancies (OV) on a two dimensional lattice and their role in forming low-resistance paths that facilitate the transition between high and low global resistance states. We reveal that the mere formation of an OV percolation path is insufficient to induce a transition to a low-resistance state. Instead, an OV concentration exceeding a critical threshold across all sites in the filament is required to generate a low-resistivity conducting path. Furthermore, we simulate the impact of static defects -which block OV migration and would correspond to voids in real porous samples-, on filament formation. We show that there is a range of defect density values where OV percolate through the sample, leading to the formation of OV filaments, but conductive paths remain absent. Additionally, a small concentration of defects can reduce the final value of the low-resistance state, thereby increasing the ON-OFF ratio. These findings provide valuable insights into optimizing defective nanomaterials with memristive properties, which are crucial for advancing in-memory and neuromorphic computing technologies.

cond-mat.mes-hall↗

Memristive response and neuromorphic functionality of polycrystalline ferroelectric Ca:HfO$_{2}$-based devices

Memristors are considered key building blocks for the development of neuromorphic computing hardware. For ferroelectric memristors with a capacitor-like structure, the polarization direction modulates the height of the Schottky barriers -- present at ferroelectric/metal interfaces -- that control the device resistance. Here, we unveil the coexistence of multiple memristive mechanisms in Pt/Ca:HfO$_2$/Pt devices fabricated on silicon by a simple and effective low-toxicity chemical solution method. Depending on the fabrication conditions, either dielectric or ferroelectric devices are obtained, each one presenting a distinct memristive response. The devices are forming-free and can sustain ferroelectric switching and memristive behavior simultaneously. Aided by numerical simulations, we describe this behavior as a competition of different mechanisms, including the effect of the ferroelectric polarization on Schottky interfaces and oxygen vacancy electromigration. Finally, we propose a simple learning algorithm for time-series recognition, designed to take advantage of the resistance relaxations present in the case of the ferroelectric devices.

physics.app-ph↗

Optimization of the multi-mem response of topotactic redox La$_{1/2}$Sr$_{1/2}$Mn$_{1/2}$Co$_{1/2}$O$_{3-x}$

Memristive systems emerge as strong candidates for the implementation of Resistive Random Access Memories (RRAM) and neuromorphic computing devices, as they can mimic the electrical analog behavior or biological synapses. In addition, complementary functionalities such as memcapacitance could significantly improve the performance of bio-inspired devices in key issues such as energy consumption. However, the physics of mem-systems is not fully understood so far, hampering their large-scale implementation in devices. Perovskites that undergo topotactic transitions and redox reactions show improved performance as mem-systems, compared to standard perovskites. In this paper we analyze different strategies to optimize the multi-mem behavior (memristive and memcapacitive) of topotactic redox La$_{1/2}$Sr$_{1/2}$Mn$_{1/2}$Co$_{1/2}$O$_{3-x}$ (LSMCO) films grown on Nb:SrTiO$_3$ (NSTO). We explored devices with different crystallinity (from amorphous to epitaxial LSMCO), out-of-plane orientation ((001) and (110)) and stimulated either with voltage or current pulses. We found that an optimum memory response is found for epitaxial (110) LSMCO stimulated with current pulses. Under these conditions, the system efficiently exchanges oxygen with the environment minimizing, at the same time, self-heating effects that trigger nanostructural and chemical changes which could affect the device integrity and performance. Our work contributes to pave the way for the integration of LSMCO-based devices in cross-bar arrays, in order to exploit their memristive and memcapacitive properties for the development of neuromorphic or in-memory computing devices

cond-mat.mtrl-sci↗

On the key role of oxygen vacancies electromigration in the memristive response of ferroelectric devices

Ferroelectric memristors are intensively studied due to their potential implementation in data storage and processing devices. In this work we show that the memristive behavior of metal/ferroelectric oxide/metal devices relies on the competition of two effects: the modulation of metal/ferroelectric interface barriers by the switchable ferroelectric polarization and the electromigration of oxygen vacancies, with the depolarizing field playing a fundamental role in the latter. We simulate our experimental results with a phenomenological model that includes both effects and we reproduce several non-trivial features of the electrical response, including resistance relaxations observed after external poling. Besides providing insight into the underlying physics of these complex devices, our work suggests that it is possible to combine non-volatile and volatile resistive changes in single ferroelectric memristors, an issue that could be useful for the development of neuromorphic devices.

physics.app-ph↗

Large memcapacitance and memristance at Nb:SrTiO$_{3}$ / La$_{0.5}$Sr$_{0.5}$Mn$_{0.5}$Co$_{0.5}$O$_{3-δ}$ Topotactic Redox Interface

The possibility to develop neuromorphic computing devices able to mimic the extraordinary data processing capabilities of biological systems spurs the research on memristive systems. Memristors with additional functionalities such as robust memcapacitance can outperform standard devices in key aspects such as power consumption or miniaturization possibilities. In this work, we demonstrate a large memcapacitive response of a perovskite memristive interface, using the topotactic redox ability of La$_{0.5}$Sr$_{0.5}$Mn$_{0.5}$Co$_{0.5}$O$_{3-δ}$ (LSMCO, 0 $\leq$ $δ$ $\leq$ 0.62). We demonstrate that the multi-mem behaviour originates at the switchable n-p diode formed at the Nb:SrTiO3/LSMCO interface. We found for our Nb:SrTiO$_{3}$/LSMCO/Pt devices a memcapacitive effect C$_{HIGH}$/C$_{LOW}$ ~ 100 at 150 kHz. The proof-of-concept interface reported here opens a promising venue to use topotactic redox materials for disruptive nanoelectronics, with straightforward applications in neuromorphic computing technology.

physics.app-ph↗

Electric selective activation of memristive interfaces in TaO$_x$-based devices

The development of novel devices for neuromorphic computing and non-traditional logic operations largely relies on the fabrication of well controlled memristive systems with functionalities beyond standard bipolar behavior and digital ON-OFF states. In the present work we demonstrate for Ta$_2$O$_5$-based devices that it is possible to selectively activate/deactivate two series memristive interfaces in order to obtain clockwise or counter-clockwise multilevel squared remanent resistance loops, just by controlling the (a)symmetry of the applied stimuli and independently of the nature of the used metallic electrodes. Based on our thorough characterization, analysis and modeling, we show that the physical origin of this electrical behavior relies on controlled oxygen vacancies electromigration between three different zones of the active Ta$_2$O$_{5-x}$ layer: a central -- bulk -- one and two quasi-symmetric interfaces with reduced TaO$_{2-h(y)}$ layers. Our devices fabrication process is rather simple as it implies the room temperature deposition of only one CMOS compatible oxide -- Ta-oxide -- and one metal, suggesting that it might be possible to take advantage of these properties at low cost and with easy scability. The tunable opposite remanent resistance loops circulations with multiple -- analogic -- intermediate stable states allows mimicking the adaptable synaptic weight of biological systems and presents potential for non-standard logic devices.

physics.app-ph↗

Origin of multistate resistive switching in Ti/manganite/Si$O_x$/Si heterostructures

We report on the growth and characterization of Ti/$La_{1/3}$$Ca_{2/3}$Mn$O_3$/Si$O_x$/n-Si memristive devices. We demonstrate that using current as electrical stimulus unveils an intermediate resistance state, in addition to the usual high and low resistance states that are observed in standard voltage controlled experiments. Based on thorough electrical characterization (impedance spectroscopy, current-voltage curves analysis), we disclose the contribution of three different microscopic regions of the device to the transport properties: an ohmic incomplete metallic filament, a thin manganite layer below the filament tip exhibiting Poole-Frenkel like conduction, and the SiOx layer with an electrical response well characterized by a Child-Langmuir law. Our results suggest that the existence of the SiOx layer plays a key role in the stabilization of the intermediate resistance level, indicating that the combination of two or more active RS oxides adds functionalities in relation to single-oxide devices. We understand that these multilevel devices are interesting and promising as their fabrication procedure is rather simple and they are fully compatible with standard Si-based electronics.

cond-mat.mtrl-sci↗

Thermal effects and switching kinetics in silver/manganite memristive systems: Probing oxygen vacancies diffusion

We investigate the switching kinetics of oxygen vacancies (Ov) diffusion in LPCMO-Ag memristive interfaces by performing experiments on the temperature dependence of the high resistance (HR) state under thermal cycling. Experimental results are well reproduced by numerical simulations based on thermally activated Ov diffusion processes and fundamental assumptions relying on a recent model proposed to explain bipolar resistive switching in manganite- based cells. The confident values obtained for activation energies and diffusion coefficient associated to Ov dynamics, constitute a validation test for both model predictions and Ov diffusion mechanisms in memristive interfaces.

cond-mat.mes-hall↗

Non-volatile multilevel resistive switching memory cell: A transition metal oxide-based circuit

We study the resistive switching (RS) mechanism as way to obtain multi-level memory cell (MLC) devices. In a MLC more than one bit of information can be stored in each cell. Here we identify one of the main conceptual difficulties that prevented the implementation of RS-based MLCs. We present a method to overcome these difficulties and to implement a 6-bit MLC device with a manganite-based RS device. This is done by precisely setting the remnant resistance of the RS-device to an arbitrary value. Our MLC system demonstrates that transition metal oxide non-volatile memories may compete with the currently available MLCs.

cond-mat.other↗

Asymmetric pulsing for reliable operation of titanium/manganite memristors

We present a pulsing protocol that significantly increases the endurance of a titanium-manganite interface used as a binary memory cell. The core of this protocol is an algorithm that searches for the proper values for the set and reset pulses, canceling the drift in the resistance values. A set of experiments show the drift-free operation for more than $10^{5}$ switching cycles, as well as the detrimental effect by changing the amplitude of pulses indicated by the protocol. We reproduced the results with a numerical model, which provides information on the dynamics of the oxygen vacancies during the switching cycles.

cond-mat.mtrl-sci↗

Anisotropic profiles in the spin polarization of multichannel semiconductor rings with Rashba spin orbit coupling

We investigate the spin accumulation effect in eccentric semiconductor multichannel rings with Rashba spin-orbit interaction and threaded by a magnetic flux. Due to the finite eccentricity, the spin polarization induced at the borders of the sample is anisotropic and exhibits different patterns and intensities at specific angular directions. This effect, reminiscent of the spin polarization drift induced by the application of an in plane electric field, could be used to manipulate and functionalize the spin polarization in electronic nanorings.

cond-mat.mes-hall↗

Finite size effects and localization properties of disordered quantum wires with chiral symmetry

Finite size effects in the localization properties of disordered quantum wires are analyzed through conductance calculations. Disorder is induced by introducing vacancies at random positions in the wire and thus preserving the chiral symmetry. For quasi one-dimensional geometries and low concentration of vacancies, an exponential decay of the mean conductance with the wire length is obtained even at the center of the energy band. For wide wires, finite size effects cause the conductance to decay following a non-pure exponential law. We propose an analytical formula for the mean conductance that reproduces accurately the numerical data for both geometries. However, when the concentration of vacancies increases above a critical value, a transition towards the suppression of the conductance occurs. This is a signature of the presence of ultra-localized states trapped in finite regions of the sample.

cond-mat.mes-hall↗

Persistent currents in diffusive metallic cavities: Large values and anomalous scaling with disorder

The effect of disorder on confined metallic cavities with an Aharonov-Bohm flux line is addressed. We find that, even deep in the diffusive regime, large values of persistent currents may arise for a wide variety of geometries. We present numerical results supporting an anomalous scaling law of the average typical current $< I_{typ}>$ with the strength of disorder $w$, $< I_{typ}> \sim w^{- γ}$ with $γ< 2$. This is contrasted with previously reported results obtained for cylindrical samples where a scaling $< I_{typ}> \sim w^{-2}$ has been found. Possible links to, up to date, unexplained experimental data are finally discussed.

cond-mat.mes-hall↗

Interaction-induced chaos in a two-electron quantum-dot system

A quasi-one-dimensional quantum dot containing two interacting electrons is analyzed in search of signatures of chaos. The two-electron energy spectrum is obtained by diagonalization of the Hamiltonian including the exact Coulomb interaction. We find that the level-spacing fluctuations follow closely a Wigner-Dyson distribution, which indicates the emergence of quantum signatures of chaos due to the Coulomb interaction in an otherwise non-chaotic system. In general, the Poincaré maps of a classical analog of this quantum mechanical problem can exhibit a mixed classical dynamics. However, for the range of energies involved in the present system, the dynamics is strongly chaotic, aside from small regular regions. The system we study models a realistic semiconductor nanostructure, with electronic parameters typical of gallium arsenide.

cond-mat.mes-hall↗

Enhancement of persistent currents due to confinement in metallic samples

Confinement and surface roughness (SR) effects on the magnitude of the persistent current are analized for ballistic bidimensional metallic samples. Depending on the particular geometry, localized border states can show up at half filling. These border states contribute coherently to the persistent current and its magnitude is enhanced with respect to their value in the absent of confinement. A linear scaling of the typical current $I_{typ}$ with the number of conduction channels M is obtained. This result is robust with respect to changes in the relevant lengths of the samples and to the SR. Possible links of our results to experiments are also discussed.

cond-mat.mes-hall↗