arXiv subjects

M. Kamruddin

Publications and source records attributed to M. Kamruddin.

13 recordsLinked to original sources

arXiv2022

Influence of nitrogen on the growth of vertical graphene nanosheets under plasma

We have investigated the effect of nitrogen (N2) as a carrier gas on the growth of vertical graphene nanosheets (VGN) by plasma enhanced chemical vapor deposition (PECVD). It is demonstrated that addition of nitrogen gas with a hydrocarbon precursor can enhance the nucleation and growth rate of graphitic base layer as well as vertical sheets. The gas also simultaneously acts as an etchant and a dopant element. The density of vertical sheets increases up to certain limit and start to decrease with further increase in N2 concentration. The synthesized VGN exhibit sheet resistance from 0.89 to 1.89 K{\Omega}/sq. and mobility from 8.05 to 20.14 cm2/V-s, depending on the morphology and type of carrier concentration. These results reveal that the surface morphology and electronic properties of VGN can be tuned by incorporation of nitrogen gas during the growth phase.

physics.app-ph↗

arXiv2022

Aging Effects on Vertical Graphene Nanosheets and their Thermal Stability

Vertical Graphene Nano sheets (VGN) have become promising candidates for a wide range of applications due to their unique architecture and remarkable properties. However, utilization of VGN in potential applications relies on their structural and thermal stability in ambient conditions. The present study investigates the environmental aging effects and thermal stability of VGN. The effects of aging on VGN are investigated by Raman spectroscopy, X-ray Photoelectron spectroscopy and electrical measurements at regular intervals for a period of six months. Thermogravimetry was employed to examine the thermal stability of VGN and it is found that they are highly stable upto 575 C in ambient atmosphere. Detailed spectroscopic analysis substantiated the retention of structural quality and surface chemistry of VGN over the test period. These findings asserted the long-term structural as well as thermal stability of VGN up to 575 C and validate their potential utilization for the next-generation device applications.

physics.app-ph↗

arXiv2022

Metal Oxide-Vertical Graphene Nanosheets for 2.6 V Aqueous Electrochemical Hybrid Capacitor

Aqueous asymmetric electrochemical capacitor, with their high power density and superior cycle stability in comparison to conventional batteries, are presently considered as the most promising contender for energy storage. However, fabricating an electrode material and choosing a suitable aqueous electrolyte are vital in developing an electrochemical capacitor device with high charge storage capacity. Herein, we report a feasible method to synthesize MnO2/Vertical graphene nanosheets (VGN) and Fe2O3/VGN as positive and negative electrodes, respectively. The surface of VGN skeleton is independently decorated with MnO2 having sponge gourd-like morphology and Fe2O3 having nanorice like morphology. A schematic representation of the growth mechanism for metal oxide on VGN network is established. Both the electrode have shown around 250 times higher charge-storage capacity than the bare VGN (0.47 mF/cm2) with the specific capacitance of 118 (MnO2/VGN) and 151 mF/cm2 (Fe2O3/VGN). In addition to the double layer capacitance contribution, the porous interconnected vertical graphene architecture serves as a mechanical backbone for the metal oxide materials and provides multiple conducting channels for the electron transport. The fabricated asymmetric device exhibited a specific capacitance of 76 mF/cm2 and energy density of 71 microWh/cm2 with an excellent electrochemical stability up to 12000 cycles, over a potential window of 2.6 V. The commendable performance of asymmetric electrochemical capacitor device authenticated its potential utilization for next-generation portable energy storage device.

cond-mat.mtrl-sci↗

arXiv2022

Plasma-Electric Field Controlled Growth of Oriented Graphene for Energy Storage Applications

Graphene is well known to grow as flat sheets aligned with the growth substrate. Oriented graphene structures typically normal to the substrate have recently gained major attention. Most often, normal orientation is achieved in plasma-assisted growth and is believed to be due to plasma induced in-built electric field, which is usually oriented normal to the substrate. This work focuses on the effect of in-built electric field on growth direction, morphology, interconnectedness, and physical properties of various configurations of graphene structures and reveals the unique dependence of these features on electric field orientation. It is shown that tilting of growth substrates from parallel to normal direction with respect to the direction of inbuilt plasma electric field leads to the morphological transitions from flat graphene structure, to oriented individual graphene sheets and then interconnected three-dimensional networks of oriented graphene sheets. The revealed transition of the growth orientation leads to change in wetting nature, types of defect in graphitic structures as well as affects their charge storage capacity when used as supercapacitor electrodes. This simple and versatile approach opens new opportunities for the production of potentially large batches of differently oriented and structured graphene sheets in one production run.

cond-mat.mtrl-sci↗

arXiv2019

Role of microstructure and structural disorder on tribological properties of polycrystalline diamond films

Polycrystalline diamond films with systematic change in microstructure that varies from microcrystalline to nanocrystalline structure are synthesized on Si by hot filament chemical vapor deposition. The morphology and structural properties of the grown diamond films are analyzed using field emission scanning electron microscope (FESEM), atomic force microscope (AFM), X-ray diffraction and Raman spectroscopy. The average roughness and grain size of the diamond films decrease with increase in CH4 to H2 ratio from 0.5 to 3 %. Also, structural disorder in these diamond films increases with decrease in grain size as evidenced from Raman spectroscopy. The coefficient of friction (CoF) is found to be very low for all the films. However, the average CoF is found to increase from 0.011 +/-0.005 to 0.03 +/- 0.015 as the grain size decrease from ~ 1 micron down to ~20 nm. Post analysis of wear track by FESEM, AFM based nanoscale friction and Raman spectroscopy reveal that microcrystalline diamond undergoes shear induced amorphization with negligible wear rate while nanocrystalline diamond films undergo shear induced plastic deformation without amorphization. A comprehensive mechanism for the observed CoF is discussed in the framework of microstructure, structural disorder and shear induced tribo-chemical reactions at the sliding interface.

cond-mat.mtrl-sci↗

arXiv2017

Transfer of Vertical Graphene Nanosheets onto Flexible Substrates towards Supercapacitor Application

Vertical graphene nanosheets (VGNs) are the material of choice for next-generation electronic device applications. The growing demand for flexible devices in electronic industry brings in restriction on growth temperature of the material of interest. However, VGNs with better structural quality is usually achieved at high growth temperatures. The difficulty associated with the direct growth on flexible substrates can overcome by adopting an effective strategy of transferring the well grown VGNs onto arbitrary flexible substrates through soft chemistry route. Hence, we demonstrated a simple, inexpensive and scalable technique for the transfer of VGNs onto arbitrary substrates without disrupting its morphology and structural properties. After transfer, the morphology, chemical structure and electronic properties are analyzed by scanning electron microscopy, Raman spectroscopy and four probe resistive methods, respectively. Associated characterization investigation indicates the retention of morphological, structural and electrical properties of transferred VGNs compared to as-grown one. Furthermore the storage capacity of the VGNs transferred onto flexible substrates is also examined. A very lower sheet resistance of 0.67 kOhm/sq. and excellent supercapacitance of 158 micro-Farrad/cm2 with 91.4% retention after 2000 cycles confirms the great prospective of this damage-free transfer approach of VGNs for flexible nanoelectronic device applications

cond-mat.mtrl-sci↗

arXiv2017

Flipping growth orientation of nanographitic structures by plasma enhanced chemical vapor deposition

Nanographitic structures (NGSs) with multitude of morphological features are grown on SiO2/Si substrates by electron cyclotron resonance - plasma enhanced chemical vapor deposition (ECR-PECVD). CH4 is used as source gas with Ar and H2 as dilutants. Field emission scanning electron microscopy, high resolution transmission electron microscopy (HRTEM) and Raman spectroscopy are used to study the structural and morphological features of the grown films. Herein, we demonstrate, how the morphology can be tuned from planar to vertical structure using single control parameter namely, dilution of CH4 with Ar and/or H2. Our results show that the competitive growth and etching processes dictate the morphology of the NGSs. While Ar-rich composition favors vertically oriented graphene nanosheets, H2-rich composition aids growth of planar films. Raman analysis reveals dilution of CH4 with either Ar or H2 or in combination helps to improve the structural quality of the films. Line shape analysis of Raman 2D band shows nearly symmetric Lorentzian profile which confirms the turbostratic nature of the grown NGSs. Further, this aspect is elucidated by HRTEM studies by observing elliptical diffraction pattern. Based on these experiments, a comprehensive understanding is obtained on the growth and structural properties of NGSs grown over a wide range of feedstock compositions.

cond-mat.mtrl-sci↗

arXiv2017

The role of substrate bias and nitrogen doping on the structural evolution and local elastic modulus of diamond-like carbon films

Diamond-like carbon (DLC) films are synthesized on Si using plasma enhanced chemical vapor deposition. The role of substrate bias and nitrogen doping on the structural evolution and local elastic modulus of DLC films are systematically investigated. Raman spectroscopic studies reveal that the amount of graphitic C=C sp2 bonding increases with substrate bias and nitrogen doping. The density and hydrogen concentration in the films are found to vary from 0.7 to 2.2 g/cm3 and 16 to 38 atomic %, respectively, depending upon the substrate bias and nitrogen concentration in the DLC films. Atomic force acoustic microscopic (AFAM) analysis shows a direct correlation between local elastic modulus and structural properties estimated by Raman spectroscopy, Rutherford back scattering and elastic recoil detection analysis. AFAM analysis further confirms the evolution of soft second phases at high substrate biases (> -150V) in undoped DLC films. Further, N doping leads to formation of such soft second phases in DLC films even at lower substrate bias of -100 V. The AFAM studies provide a direct microscopic evidence for the "sub-implantation growth model" which predicts the formation of graphitic second phases in DLC matrix at high substrate biases.

cond-mat.mtrl-sci↗

arXiv2016

A comparative study on defect estimation using XPS and Raman spectroscopy in few layer nanographitic structures

Defects in planar and vertically oriented nanographitic structures (NGSs) synthesized by plasma enhanced chemical vapor deposition (PECVD) has been investigated using Raman and X-ray photoelectron spectroscopy. While Raman spectra reveal the dominance of vacancy and boundary type defects respectively in vertical and planar NGSs, XPS provides additional information on vacancy related defect peaks at C 1s spectrum that originate from non-conjugated carbon atoms in hexagonal lattice. Although an excellent correlation prevails between these two techniques, our results show that estimation of surface defects by XPS is more accurate than Raman analysis. Nuances of these techniques are discussed in the context of assessing defects in nanographitic structures.

cond-mat.mtrl-sci↗

arXiv2016

Piezoelectric Domains in the AlGaN Hexagonal Microrods: Effect of Crystal Orientations

Presently, the piezoelectric materials are finding tremendous applications in the micro-mechanical actuators, sensors and self-powered devices. In this context, the studies pertaining to piezoelectric properties of materials in the different size ranges are very important for the scientific community. The III-nitrides are exceptionally important, not only for optoelectronic but also for their piezoelectric applications. In the present study, we synthesized AlGaN via self catalytic vapor-solid mechanism by atmospheric pressure chemical vapor deposition technique on AlN base layer over intrinsic Si(100) substrate. The growth process is substantiated using X-ray diffraction and X-ray photoelectron spectroscopy. The Raman and photoluminescence study reveal the formation of AlGaN microrods in the wurtzite phase and ensures the high optical quality of the crystalline material. The single crystalline, direct wide band gap and hexagonally shaped AlGaN microrods are studied for understanding the behavior of the crystallites under the application of constant external electric field using the piezoresponse force microscopy. The present study is mainly focused on understanding the behavior of induced polarization for the determination of piezoelectric coefficient of AlGaN microrod along the c-axis and imaging of piezoelectric domains in the sample originating because of the angular inclination of AlGaN microrods with respect to its AlN base layers.

cond-mat.mtrl-sci↗

arXiv2016

Influence of aqueous electrolytes on electrochemical performance of vertical graphene nanosheets supercapacitor electrode

Vertical graphene nanosheets (VGN) grown as controlled porous network are studied and demonstrated as a promising electrode material for supercapacitors. The VGN synthesized by microwave plasma enhanced chemical vapor deposition using CH4/Ar gas mixture as precursor are considered for electrochemical performance in Na2SO4, KOH, and H2SO4 to delineate the electrolyte effect. Among the electrolytes, H2SO4 exhibited excellent specific areal capacitance (188 microfarad/cm2) and good capacitance retention (96.8%). No significant change is observed in impedance spectra even after 200 cycles. An electric equivalent circuit for the system is simulated from Nyquist plot to elucidate the behavior of electrode/electrolyte interface. This potential supercapacitor electrode material is well characterized by scanning electron microscopy, transmission electron microscopy, Raman spectroscopy, and contact angle measurement. Utilization of aqueous electrolytes for potential supercapacitors is also discussed in relation to improved performance observed in H2SO4 medium.

cond-mat.mtrl-sci↗

arXiv2016

A route towards controlling the morphology of vertical graphene nanosheets

Herein, an effort has given to sheds light on the effects of plasma process parameters on the growth of vertical graphene nanosheets (VGNs) by plasma enhanced chemical vapor deposition (PECVD. The parameters include substrate temperature, microwave power and distance between plasma sources to substrate. The significant influence of these variable parameters is observed on the morphology, growth rate and crystallinity. Thus these parameters are found to be deciding factors, which determine the surface reaction and growth kinetics that governed the final structure and controlled morphology of VGNs. The activation energy of the VGNs grown by PECVD is found to be 0.57 eV. A direct evidence of vertical growth through the nanographitic island is observed from temperature dependent growth of VGNs. Such understanding on growth of VGNs is not only useful for growth mechanism under plasma chemistry but also beneficial to get controlled and desired structure for field emission and energy storage application.

cond-mat.mtrl-sci↗

arXiv2014

Evolution and defect analysis of vertical graphene nanosheets

We report catalyst-free direct synthesis of vertical graphene nanosheets (VGNs) on SiO2/Si and quartz substrates using microwave electron cyclotron resonance - plasma enhanced chemical vapor deposition. The evolution of VGNs is studied systematically at different growth stages. Raman analysis as a function of growth time reveals that two different disorder-induced competing mechanisms contributing to the defect band intensity. The VGNs grown on SiO2/Si substrates predominantly consists of both vacancy-like and hopping defects. On the other hand, the VGNs grown on quartz substrates contain mainly boundary-like defects. XPS studies also corroborate Raman analysis in terms of defect density and vacancy-like defects for the VGNs grown on SiO2/Si substrates. Moreover, the grown VGNs exhibit a high optical transmittance from 95 to 78 % at 550 nm and the sheet resistance varies from 30 to 2.17 kohms/square depending on growth time.

cond-mat.mtrl-sci↗