arXiv subjects

M. Lampert

Publications and source records attributed to M. Lampert.

11 recordsLinked to original sources

arXiv2026

Photodiode based multi-modal diagnostic for low-energy neutral beam injection in the LTX-$\beta$ spherical tokamak

We present a compact photodiode-based diagnostic array developed to study low-energy neutral beam injection in the LTX-$\beta$ spherical tokamak. The in-vacuum diagnostic combines filtered soft-x-ray (SXR), narrowband Lyman-$\alpha$, and unfiltered AXUV photodiode rows with partly overlapping, nearly coincident tangential views of the plasma, including the neutral beam path. This geometry provides simultaneous sensitivity to beam-induced SXR emission; neutral-hydrogen line radiation associated with recycling, fast neutrals and fueling; and broadband emission that can include direct neutral impacts from fast-ion charge-exchange losses. Initial measurements from 12-20 keV hydrogen beam operation show beam-synchronous detector responses in all three modalities. The unfiltered AXUV signals exhibit millisecond-scale rise and fall times that are much slower than the detector response, that vary across sightlines, and depend on lithium-conditioning history. Comparison with classical slowing-down time estimates indicates that charge exchange with background neutrals contributes appreciably to the measured decay. The diagnostic can potentially be used to constrain a forward model to estimate the time-resolved balance of beam heating and fueling for small tokamaks.

physics.plasm-ph↗

arXiv2026

Modeling Temperature Profiles in the Pedestal of NSTX with Reduced Models

This paper describes new modeling capabilities for predicting H-mode pedestal profiles in spherical tokamaks. Temperature profiles for NSTX discharges 132543 and 132588 are modeled by coupling the \textsc{astra} transport solver with neoclassical transport and gyrokinetic-based reduced models for electron temperature gradient (ETG) and kinetic ballooning mode (KBM) instabilities. A quasi-linear surrogate model for ion-scale transport is developed using linear \textsc{gene} simulations, requiring only a single free parameter calibrated to one discharge. Time-evolving the temperatures with fixed density yields good agreement with experiments for both discharges. Systematic analysis of the transport mechanisms reveals that neoclassical transport is huge across the entire pedestal region for the ion channel. ETG turbulence is large in the plasma edge and low density gradient region, contributing substantially to the electron channel. However, KBM/MHD-like modes also drive significant transport in both the ion and electron thermal channels, making them essential for accurate pedestal modeling. Further refinements, including explicit $E \times B$ shear suppression and scaled ETG transport, produce quantitative but not qualitative improvements. This work lays the foundation for predictive modeling of future devices.

physics.plasm-ph↗

arXiv2025

Turbulent Transport-Limited Pedestals in Tokamaks

H-mode operation of tokamak fusion plasmas free of dangerous Type 1 edge-localized-modes (ELMs) requires a non-ELM mechanism for saturating the edge pedestal growth. One possible mechanism is turbulent transport. We introduce a transport threshold model to find pedestal width-height scalings for turbulent transport-limited pedestals. The model is applied to electron heat transport resulting from electron-temperature-gradient (ETG) turbulence. The width-height scalings are highly sensitive to the relative contribution of density and temperature to the pedestal pressure. Pressure that builds up mainly through temperature is more likely to be transport-limited, and hence ELM-free. A relative radial inward shift of the temperature to density pedestal location is also more likely to transport-limit the pedestal. A second constraint such as flow shear is required to saturate pedestal growth. We also calculate width-height transport scalings resulting from particle and heat transport arising from ETG and kinetic-ballooning-mode turbulence. Comparisons are performed for ELMy and ELM-free experiments in MAST-U, NSTX, and DIII-D. This is a first step towards a pedestal width-height scaling for transport-limited ELM-free pedestals.

physics.plasm-ph↗

arXiv2025

Prediction of ELM-free Operation in Spherical Tokamaks With High Plasma Squareness

We predict that high plasma squareness in spherical tokamaks (STs) could result in edge-localized-mode (ELM)-free H-mode. The effect of squareness on gyrokinetic and peeling-ballooning-mode width-height pedestal scalings is calculated for STs. Because STs can sustain H-mode in first ballooning stability, first-stable pedestals with lower gradients may be further from the peeling-ballooning-mode boundary and therefore naturally free of Type 1 ELMs. We show that while higher squareness destabilizes ballooning modes in first stability, the ELM stability boundary is essentially unchanged. Therefore, higher squareness could result in ELM-free discharges. Random Forest (RF) machine learning models for the gyrokinetic growth rate and distance from first stability are used to predict how squareness affects stability. A RF model with only three easily obtainable geometric inputs predicts proximity to the gyrokinetic width-height scaling on a test dataset with high accuracy, $R^2 = 0.965$.

physics.plasm-ph↗

arXiv2025

HIPED: Machine Learning Framework for Spherical Tokamak Pedestal Prediction and Optimization

We introduce a Machine Learning framework, HIPED (HeIght and width Predictor for Edge Dynamics), for predicting and optimizing pedestal and core performance in spherical tokamak plasmas. Trained on pedestal and core datasets from the third MAST-U campaign, HIPED provides accurate estimates of pedestal height and width. The results reveal notable differences compared with conventional aspect-ratio studies; for instance, a simple power-law relation between pedestal width and height has very low accuracy. Instead, additional parameters such as normalized plasma pressure, elongation, and Greenwald fraction significantly improve accuracy. HIPED can also be trained only on `control room parameters' to inform experimentalists of which controllable parameters to adjust for improving core-integrated performance. The framework further includes a multi-objective optimization scheme that helps guide experimental planning and optimization. We find Pareto-optimal discharges with respect to various features, including distance from edge-localized modes and normalized plasma pressure, track their parameter trajectories over time, and identify the control room parameters required for these Pareto-optimal discharges. This provides a framework for systematically optimizing core and edge performance according to different experimental priorities.

physics.plasm-ph↗

arXiv2024

Stability and Transport of Gyrokinetic Critical Pedestals

A gyrokinetic threshold model for pedestal width-height scaling prediction is applied to multiple devices and to a shaping and aspect-ratio scan giving $\Delta_{\mathrm{ped}} = 0.92 A^{1.04} \kappa^{-1.24} 0.38^{\delta} \beta_{\theta,\mathrm{ped}}^{1.05}$ for pedestal width $\Delta_{\mathrm{ped}}$, aspect-ratio $A$, elongation $\kappa$, triangularity $\delta$, and normalized pedestal height $\beta_{\theta,\mathrm{ped}}$. We also find a width-transport scaling $\Delta_{\mathrm{ped} } = 0.028 \left(q_e/\Gamma_e - 1.7 \right)^{1.5} \sim \eta_e ^{1.5}$ where $q_e$ and $\Gamma_e$ are turbulent electron heat and particle fluxes and $\eta_e = \nabla \ln T_e / \nabla \ln n_e$ for electron temperature $T_e$ and density $n_e$. Pedestals close to those limited by kinetic-ballooning-modes (KBMs) have modified turbulent transport properties compared to strongly driven KBMs. The role of flow shear is studied as a width-height scaling constraint and pedestal saturation mechanism for a standard and wide pedestal discharge.

physics.plasm-ph↗

arXiv2023

Kinetic-Ballooning-Bifurcation in Tokamak Pedestals Across Shaping and Aspect-Ratio

We use a new gyrokinetic threshold model to predict a bifurcation in tokamak pedestal width-height scalings that depends strongly on plasma shaping and aspect-ratio. The bifurcation arises from the first and second stability properties of kinetic-ballooning-modes that yields wide and narrow pedestal branches, expanding the space of accessible pedestal widths and heights. The wide branch offers potential for edge-localized-mode-free pedestals with high core pressure. For negative triangularity, low-aspect-ratio configurations are predicted to give steeper pedestals than conventional-aspect-ratio. Both wide and narrow branches have been attained in tokamak experiments.

physics.plasm-ph↗

arXiv2023

Kinetic-Ballooning-Limited Pedestals in Spherical Tokamak Plasmas

A theoretical model is presented that for the first time matches experimental measurements of the pedestal width-height Diallo scaling in the low-aspect-ratio high-$\beta$ tokamak NSTX. Combining linear gyrokinetics with self-consistent pedestal equilibrium variation, kinetic-ballooning, rather than ideal-ballooning plasma instability, is shown to limit achievable confinement in spherical tokamak pedestals. Simulations are used to find the novel Gyrokinetic Critical Pedestal constraint, which determines the steepest pressure profile a pedestal can sustain subject to gyrokinetic instability. Gyrokinetic width-height scaling expressions for NSTX pedestals with varying density and temperature profiles are obtained. These scalings for spherical tokamaks depart significantly from that of conventional aspect ratio tokamaks.

physics.plasm-ph↗

arXiv2016

Reliability of the two-point measurement of the spatial correlation length from Gaussian-shaped fluctuating signals in fusion-grade plasmas

A statistical method for the estimation of spatial correlation lengths of Gaussian-shaped fluctuating signals with two measurement points is examined to quantitatively evaluate its reliability (variance) and accuracy (bias error). The standard deviation of the correlation value is analytically derived for randomly distributed Gaussian shaped fluctuations satisfying stationarity and homogeneity, allowing us to evaluate, as a function of fluctuation-to-noise ratios, sizes of averaging time windows and ratios of the distance between the two measurement points to the true correlation length, the goodness of the two-point measurement for estimating the spatial correlation length. Analytic results are confirmed with numerically generated synthetic data and real experimental data obtained with the KSTAR beam emission spectroscopy diagnostic. Our results can be applied to Gaussian-shaped fluctuating signals where a correlation length must be measured with only two measurement points.

physics.plasm-ph↗

arXiv2013

Three-dimensional modeling of beam emission spectroscopy measurements in fusion plasmas

One of the main diagnostic tools for measuring electron density profiles and the characteristics of long wavelength turbulent wave structures in fusion plasmas is Beam Emission Spectroscopy (BES). The increasing number of BES systems necessitated an accurate and comprehensive simulation of BES diagnostics, which in turn motivated the development of the RENATE simulation code that is the topic of this paper. RENATE is a modular, fully three-dimensional code incorporating all key features of BES systems from the atomic physics to the observation, including an advanced modeling of the optics. Thus RENATE can be used both in the interpretation of measured signals and the development of new BES systems. The most important components of the code have been successfully benchmarked against other simulation codes. The primary results have been validated against experimental data from the KSTAR tokamak.

physics.plasm-ph↗

arXiv2007

Characterization of the first true coaxial 18-fold segmented n-type prototype detector for the GERDA project

The first true coaxial 18-fold segmented n-type HPGe prototype detector produced by Canberra-France for the GERDA neutrinoless double beta-decay project was tested both at Canberra-France and at the Max-Planck-Institut fuer Physik in Munich. The main characteristics of the detector are given and measurements concerning detector properties are described. A novel method to establish contacts between the crystal and a Kapton cable is presented.

nucl-ex↗