arXiv subjects

M. Sandberg

Publications and source records attributed to M. Sandberg.

18 recordsLinked to original sources

arXiv2021

Quasiparticle tunneling as a probe of Josephson junction barrier and capacitor material in superconducting qubits

Non-equilibrium quasiparticles are possible sources for decoherence in superconducting qubits because they can lead to energy decay or dephasing upon tunneling across Josephson junctions (JJs). Here, we investigate the impact of the intrinsic properties of two-dimensional transmon qubits on quasiparticle tunneling (QPT) and discuss how we can use quasiparticle dynamics to gain critical information about the quality of JJ barrier. We find the tunneling rate of the nonequilibrium quasiparticles to be sensitive to the choice of the shunting capacitor material and their geometry in qubits. In some devices, we observe an anomalous temperature dependence of the QPT rate below 100 mK that deviates from a constant background associated with non-equilibrium quasiparticles. We speculate that this behavior is caused by high transmission sites/defects within the oxide barriers of the JJs, leading to spatially localized subgap states. We model this by assuming that such defects generate regions with a smaller effective gap. Our results present a unique in situ characterization tool to assess the uniformity of tunnel barriers in qubit junctions and shed light on how quasiparticles can interact with various elements of the qubit circuit.

quant-ph↗

arXiv2021

Environmental Radiation Impact on Lifetimes and Quasiparticle Tunneling Rates of Fixed-Frequency Transmon Qubits

Quantum computing relies on the operation of qubits in an environment as free of noise as possible. This work reports on measuring the impact of environmental radiation on lifetimes of fixed frequency transmon qubits with various capacitor pad geometries by varying the amount of shielding used in the measurement space. It was found that the qubit lifetimes are robust against these shielding changes until the most extreme limit was tested without a mixing chamber shield in the refrigerator. In contrast, the quasiparticle tunneling rates were found to be extremely sensitive to all configurations tested, indicating these devices are not yet limited by losses related to superconducting quasiparticles.

quant-ph↗

arXiv2021

Merged-Element Transmons: Design and Qubit Performance

We have demonstrated a novel type of superconducting transmon qubit in which a Josephson junction has been engineered to act as its own parallel shunt capacitor. This merged-element transmon (MET) potentially offers a smaller footprint and simpler fabrication than conventional transmons. Because it concentrates the electromagnetic energy inside the junction, it reduces relative electric field participation from other interfaces. By combining micrometer-scale Al/AlOx/Al junctions with long oxidations and novel processing, we have produced functional devices with $E_{J}$/$E_{C}$ in the low transmon regime ($E_{J}$/$E_{C}$ $\lesssim$30). Cryogenic I-V measurements show sharp dI/dV structure with low sub-gap conduction. Qubit spectroscopy of tunable versions show a small number of avoided level crossings, suggesting the presence of two-level systems (TLS). We have observed mean T1 times typically in the range of 10-90 microseconds, with some annealed devices exhibiting T1 > 100 microseconds over several hours. The results suggest that energy relaxation in conventional, small-junction transmons is not limited by junction loss.

quant-ph↗

arXiv2021

Effects of surface treatments on flux tunable transmon qubits

One of the main limitations in state-of-the art solid-state quantum processors are qubit decoherence and relaxation due to noise in their local environment. For the field to advance towards full fault-tolerant quantum computing, a better understanding of the underlying microscopic noise sources is therefore needed. Adsorbates on surfaces, impurities at interfaces and material defects have been identified as sources of noise and dissipation in solid-state quantum devices. Here, we use an ultra-high vacuum package to study the impact of vacuum loading, UV-light exposure and ion irradiation treatments on coherence and slow parameter fluctuations of flux tunable superconducting transmon qubits. We analyse the effects of each of these surface treatments by comparing averages over many individual qubits and measurements before and after treatment. The treatments studied do not significantly impact the relaxation rate $\Gamma_1$ and the echo dephasing rate $\Gamma_2^\textrm{e}$, except for Ne ion bombardment which reduces $\Gamma_1$. In contrast, flux noise parameters are improved by removing magnetic adsorbates from the chip surfaces with UV-light and NH$_3$ treatments. Additionally, we demonstrate that SF$_6$ ion bombardment can be used to adjust qubit frequencies in-situ and post fabrication without affecting qubit coherence at the sweet spot.

quant-ph↗

arXiv2020

Ultrahigh Vacuum Packaging and Surface Cleaning for Quantum Devices

We describe design, implementation and performance of an ultra-high vacuum (UHV) package for superconducting qubit chips or other surface sensitive quantum devices. The UHV loading procedure allows for annealing, ultra-violet light irradiation, ion milling and surface passivation of quantum devices before sealing them into a measurement package. The package retains vacuum during the transfer to cryogenic temperatures by active pumping with a titanium getter layer. We characterize the treatment capabilities of the system and present measurements of flux tunable qubits with an average T$_1=84~\mu$s and T$^{echo}_2=134~\mu$s after vacuum-loading these samples into a bottom loading dilution refrigerator in the UHV-package.

quant-ph↗

arXiv2014

Ultra-Broadband Microwave Frequency-Comb Generation in Superconducting Resonators

We have generated frequency combs spanning 0.5 to 20 GHz in superconducting half wave resonators at T=3 K. Thin films of niobium-titanium nitride enabled this development due to their low loss, high nonlinearity, low frequency dispersion, and high critical temperature. The combs nucleate as sidebands around multiples of the pump frequency. Selection rules for the allowed frequency emission are calculated using perturbation theory and the measured spectrum is shown to agree with the theory. The sideband spacing is measured to be accurate to 1 part in 10 million. The sidebands coalesce into a continuous comb structure that has been observed to cover at least 6 octaves in frequency.

cond-mat.supr-con↗

arXiv2014

Measuring a topological transition in an artificial spin 1/2 system

We present measurements of a topological property, the Chern number ($C_\mathrm{1}$), of a closed manifold in the space of two-level system Hamiltonians, where the two-level system is formed from a superconducting qubit. We manipulate the parameters of the Hamiltonian of the superconducting qubit along paths in the manifold and extract $C_\mathrm{1}$ from the nonadiabitic response of the qubit. By adjusting the manifold such that a degeneracy in the Hamiltonian passes from inside to outside the manifold, we observe a topological transition $C_\mathrm{1} = 1 \rightarrow 0$. Our measurement of $C_\mathrm{1}$ is quantized to within 2 percent on either side of the transition.

quant-ph↗

arXiv2013

The pumpistor: a linearized model of a flux-pumped SQUID for use as a negative-resistance parametric amplifier

We describe a circuit model for a flux-driven SQUID. This is useful for developing insight into how these devices perform as active elements in parametric amplifiers. The key concept is that frequency mixing in a flux-pumped SQUID allows for the appearance of an effective negative resistance. In the three-wave, degenerate case treated here, a negative resistance appears only over a certain range of allowed input signal phase. This model readily lends itself to testable predictions of more complicated circuits.

cond-mat.supr-con↗

arXiv2013

Improved superconducting qubit coherence using titanium nitride

We demonstrate enhanced relaxation and dephasing times of transmon qubits, up to ~ 60 μs by fabricating the interdigitated shunting capacitors using titanium nitride (TiN). Compared to lift-off aluminum deposited simultaneously with the Josephson junction, this represents as much as a six-fold improvement and provides evidence that previous planar transmon coherence times are limited by surface losses from two-level system (TLS) defects residing at or near interfaces. Concurrently, we observe an anomalous temperature dependent frequency shift of TiN resonators which is inconsistent with the predicted TLS model.

quant-ph↗

arXiv2010

Photon generation in an electromagnetic cavity with a time-dependent boundary

We report the observation of photon generation in a microwave cavity with a time-dependent boundary condition. Our system is a microfabricated quarter-wave coplanar waveguide cavity. The electrical length of the cavity is varied using the tunable inductance of a superconducting quantum interference device. It is measured in the quantum regime, where the temperature is significantly less than the resonance frequency (~ 5 GHz). When the length is modulated at approximately twice the static resonance frequency, spontaneous oscillations of the cavity field are observed. Time-resolved measurements of the dynamical state of the cavity show multiple stable states. The behavior is well described by theory. Connections to the dynamical Casimir effect are discussed.

quant-ph↗

arXiv2010

Excess dissipation in a single-electron box: The Sisyphus resistance

We present measurements of the ac response of a single-electron box (SEB). We apply an rf signal with a frequency larger than the tunneling rate and drive the system out of equilibrium. We observe much more dissipation in the SEB then one would expect from a simple circuit model. We can explain this in terms of a mechanism that we call the Sisyphus resistance. The Sisyphus resistance has a strong gate dependence which can be used for electrometery applications.

cond-mat.supr-con↗

arXiv2010

Fast readout of a single Cooper-pair box using its quantum capacitance

We have fabricated a single Cooper-pair box (SCB) together with an on-chip lumped element resonator. By utilizing the quantum capacitance of the SCB, its state can be read out by detecting the phase of a radio-frequency (rf) signal reflected off the resonator. The resonator was optimized for fast readout. By studying quasiparticle tunneling events in the SCB, we have characterized the performance of the readout and found that we can perform a single shot parity measurement in approximately 50 ns. This is an order of magnitude faster than previously reported measurements.

cond-mat.supr-con↗

arXiv2009

Dressed Relaxation and Dephasing in a Strongly Driven Two-Level system

We study relaxation and dephasing in a strongly driven two-level system interacting with its environment. We develop a theory which gives a straightforward physical picture of the complex dynamics of the system in terms of dressed states. In addition to the dressing of the energy diagram, we describe the dressing of relaxation and dephasing. We find a good quantitative agreement between the theoretical calculations and measurements of a superconducting qubit driven by an intense microwave field. The competition of various processes leads to a rich structure in the observed behavior, including signatures of population inversion.

quant-ph↗

arXiv2008

Fast tuning of superconducting microwave cavities

Photons are fundamental excitations of the electromagnetic field and can be captured in cavities. For a given cavity with a certain size, the fundamental mode has a fixed frequency {\it f} which gives the photons a specific "color". The cavity also has a typical lifetime $τ$, which results in a finite linewidth $δ${\it f}. If the size of the cavity is changed fast compared to $τ$, and so that the frequency change $Δ${\it f} $\gg δ${\it f}, then it is possible to change the "color" of the captured photons. Here we demonstrate superconducting microwave cavities, with tunable effective lengths. The tuning is obtained by varying a Josephson inductance at one end of the cavity. We show data on four different samples and demonstrate tuning by several hundred linewidths in a time $Δt \ll τ$. Working in the few photon limit, we show that photons stored in the cavity at one frequency will leak out from the cavity with the new frequency after the detuning. The characteristics of the measured devices make them suitable for different applications such as dynamic coupling of qubits and parametric amplification.

cond-mat.mes-hall↗

arXiv2008

In-situ frequency tuning of photons stored in a high Q microwave cavity

Photons are fundamental excitations of the electromagnetic field and can be captured in cavities. For a given cavity with a certain size, the fundamental mode has a fixed frequency f which gives the photons a specific "colour". The cavity also has a typical lifetime tau, which results in a finite linewidth delta f}. If the size of the cavity is changed fast compared to tau, and so that the frequency change Delta f >> delta f, then it is possible to change the "colour" of the captured photons. Here we demonstrate superconducting microwave cavities, with tunable effective lengths. The tuning is obtained by varying a Josephson inductance at one end of the cavity. We show tuning by several hundred linewidths in a time Delta t << tau. Working in the few photon limit, we show that photons stored in the cavity at one frequency will leak out from the cavity with the new frequency after the detuning. The characteristics of the measured devices make them suitable for dynamic coupling of qubits.

cond-mat.supr-con↗

arXiv2007

Coherence times of dressed states of a superconducting qubit under extreme driving

In this work, we measure longitudinal dressed states of a superconducting qubit, the single Cooper-pair box, and an intense microwave field. The dressed states represent the hybridization of the qubit and photon degrees of freedom, and appear as avoided level crossings in the combined energy diagram. By embedding the circuit in an rf oscillator, we directly probe the dressed states. We measure their dressed gap as a function of photon number and microwave amplitude, finding good agreement with theory. In addition, we extract the relaxation and dephasing rates of these states.

cond-mat.supr-con↗

arXiv2006

In-situ measurement of self-heating in intrinsic tunnelling spectroscopy

Using advanced sample engineering we performed simultaneous measurement of intrinsic (interlayer) tunnelling characteristics and in-situ monitoring of temperature in small Bi-2212 mesa structures. Together with a systematic study of size-dependence of intrinsic tunnelling, this allowed an unambiguous discrimination between artifacts of self-heating and gaps in electronic spectrum of Bi-2212 High-$T_c$ superconductor. Finally, we analyze the reliability of intrinsic tunnelling spectroscopy and discuss how it can be improved.

cond-mat.supr-con↗

arXiv2005

Superconducting quantum interference phenomenon in Bi$_2$Sr$_2$CaCu$_2$O$_{8+δ}$ single crystals

The operational dc-SQUID based on intrinsic Josephson junctions in Bi$_2$Sr$_2$CaCu2O$_{8+δ}$ high-$T_c$ superconductor is fabricated and studied. The novel in-plane loop layout and the developed in-situ endpoint detection method allowed an accurate control of the number of junctions in the SQUID. A clear periodic modulation of the superconducting current as a function of magnetic flux through the SQUID loop is observed. This is an unambiguous evidence for the quantum interference phenomenon in Bi$_2$Sr$_2$CaCu2O$_{8+δ}$ single crystals.

cond-mat.supr-con↗