Searcharxiv⌕ Search

arXiv subjects

Maged Elkashlan

Publications and source records attributed to Maged Elkashlan.

At least 37 records · Page 2Linked to original sources

Variable Block-Correlation Modeling and Optimization for Secrecy Analysis in Fluid Antenna Systems

Fluid antenna systems (FAS) are emerging as a transformative enabler for sixth-generation (6G) wireless communications, providing unprecedented spatial diversity through dynamic reconfiguration of antenna ports. However, the inherent spatial correlation among ports poses significant challenges for accurate analysis. Conventional models such as Jakes are analytically intractable, while oversimplified constant-correlation models fail to capture the true behavior. In this work, we address these challenges by applying the variable block-correlation model (VBCM) -- originally proposed by Ramírez-Espinosa \textit{et al.} in 2024 -- to FAS security analysis, and by developing comprehensive optimization methods to enhance analytical accuracy. We derive new closed-form expressions for average secrecy capacity (ASC) and secrecy outage probability (SOP), demonstrating that the VBCM framework achieves simulation-aligned accuracy, with relative errors consistently below $5\%$ (compared to $10$--$15\%$ for constant-correlation models). To maximize ASC, we further design two algorithms: a grid search (GS) method and a gradient descent (GD) method. Numerical results reveal that the VBCM-based approach not only provides reliable insights into FAS security performance, but also yields substantial gains -- ASC improvements exceeding $120\%$ in high-threat scenarios and $18$--$19\%$ performance enhancements for compact antenna configurations. These findings underscore the practical value of integrating VBCM into FAS security analysis and optimization, establishing it as a powerful tool for advancing 6G communication systems.

eess.SP↗

FAS-ARIS: Turning Multipath Challenges Into Localization Opportunities

Traditional single-input single-output (SISO) systems face fundamental limitations in achieving accurate three-dimensional (3D) localization due to limited spatial degrees of freedom (DoF) and the adverse impact of multipath propagation. This paper proposes a novel fluid antenna system (FAS)-active reconfigurable intelligent surface (ARIS) framework that transforms multipath effects from a hindrance into a resource for enhanced localization. By synergistically combining the signal amplification capabilities of ARIS with the spatial diversity enabled by FAS, the proposed system achieves robust 3D user equipment (UE) positioning -- without relying on auxiliary information such as time-of-arrival (ToA) or frequency diversity. The system exploits both line-of-sight (LoS) and non-line-of-sight (NLoS) components through a tailored signal decoupling strategy. We design novel UE pilot sequences and ARIS phase configurations to effectively separate LoS and NLoS channels, enabling independent parameter estimation. A multi-stage estimation algorithm is then applied: the multiple signal classification (MUSIC) algorithm estimates angle-of-arrival (AoA) from the direct path, while maximum likelihood estimation with interior-point refinement recovers cascaded channel parameters from the reflected path. Finally, geometric triangulation using least-squares estimation determines the UE's 3D position based on the extracted AoA information. Comprehensive performance analysis, including the derivation of Cramér-Rao bounds for both channel and position estimation, establishes theoretical benchmarks. Simulation results confirm that the proposed FAS-ARIS framework achieves near-optimal localization accuracy while maintaining robustness in rich multipath environments -- effectively turning conventional localization challenges into advantages.

eess.SP↗

Revisiting XL-MIMO Channel Estimation: When Dual-Wideband Effects Meet Near Field

The deployment of extremely large antenna arrays (ELAAs) in extremely large-scale multiple-input multiple-output (XL-MIMO) systems introduces significant near-field effects, such as spherical wavefront propagation and spatially non-stationary (SnS) properties. When combined with the dual-wideband effects inherent to wideband systems, these phenomena fundamentally alter the channel's sparsity patterns in the angular-delay domain, rendering existing estimation methods insufficient. To address these challenges, this paper reconsiders the channel estimation problem for wideband XL-MIMO systems. Leveraging the spatial-chirp property of array responses, we first quantitatively characterize the angular-delay domain sparsity of wideband XL-MIMO channels, revealing both global block sparsity and local common-delay sparsity. To effectively capture this structured sparsity, we then propose a novel column-wise hierarchical prior model that integrates a precision sharing mechanism and a Markov random field (MRF) structure. Building on this prior model, the channel estimation task is formulated as a multiple measurement vector (MMV)-based Bayesian inference problem. Tailored to the complex factor graph induced by this hierarchical prior, we develop a MMV-based hybrid message passing (MMV-HMP) algorithm. This algorithm performs message updates along the edges of the factor graph, and selectively applies either the variational message passing (VMP) or sum-product (SP) rules, depending on the factor-node structure and message tractability. Simulation results validate the effectiveness of the proposed column-wise hierarchical prior model through ablation studies and demonstrate that the MMV-HMP algorithm, while maintaining moderate computational complexity, consistently outperforms existing baselines which fail to capture the structured sparsity of wideband XL-MIMO channels.

cs.IT↗

The Future is Fluid: Revolutionizing DOA Estimation with Sparse Fluid Antennas

This paper investigates a design framework for sparse fluid antenna systems (FAS) enabling high-performance direction-of-arrival (DOA) estimation, particularly in challenging millimeter-wave (mmWave) environments. By ingeniously harnessing the mobility of fluid antenna (FA) elements, the proposed architectures achieve an extended range of spatial degrees of freedom (DoF) compared to conventional fixed-position antenna (FPA) arrays. This innovation not only facilitates the seamless application of super-resolution DOA estimators but also enables robust DOA estimation, accurately localizing more sources than the number of physical antenna elements. We introduce two bespoke FA array structures and mobility strategies tailored to scenarios with aligned and misaligned received signals, respectively, demonstrating a hardware-driven approach to overcoming complexities typically addressed by intricate algorithms. A key contribution is a light-of-sight (LoS)-centric, closed-form DOA estimator, which first employs an eigenvalue-ratio test for precise LoS path number detection, followed by a polynomial root-finding procedure. This method distinctly showcases the unique advantages of FAS by simplifying the estimation process while enhancing accuracy. Numerical results compellingly verify that the proposed FA array designs and estimation techniques yield an extended DoF range, deliver superior DOA accuracy, and maintain robustness across diverse signal conditions.

eess.SP↗

Dynamic Resource Allocation in Distributed MIMO-LEO Satellite Networks

This paper characterizes the impacts of channel estimation errors and Rician factors on achievable data rate and investigates the user scheduling strategy, combining scheme, power control, and dynamic bandwidth allocation to maximize the sum data rate in the distributed multiple-input-multiple-output (MIMO)-enabled low earth orbit (LEO) satellite networks. However, due to the resource-assignment problem, it is challenging to find the optimal solution for maximizing the sum data rate. To transform this problem into a more tractable form, we first quantify the channel estimation errors based on the minimum mean square error (MMSE) estimator and rigorously derive a closed-form lower bound of the achievable data rate, offering an explicit formulation for resource allocation. Then, to solve the NP-hard problem, we decompose it into three sub-problems, namely, user scheduling strategy, joint combination and power control, and dynamic bandwidth allocation, by using alternative optimization (AO). Specifically, the user scheduling is formulated as a graph coloring problem by iteratively updating an undirected graph based on user requirements, which is then solved using the DSatur algorithm. For the combining weights and power control, the successive convex approximation (SCA) and geometrical programming (GP) are adopted to obtain the sub-optimal solution with lower complexity. Finally, the optimal bandwidth allocation can be achieved by solving the concave problem. Numerical results validate the analytical tightness of the derived bound, especially for large Rician factors, and demonstrate significant performance gains over other benchmarks.

eess.SP↗

Latency-Aware Resource Allocation for Integrated Communications, Computation, and Sensing in Cell-Free mMIMO Systems

In this paper, we investigate a cell-free massive multiple-input and multiple-output (MIMO)-enabled integration communication, computation, and sensing (ICCS) system, aiming to minimize the maximum computation latency to guarantee the stringent sensing requirements. We consider a two-tier offloading framework, where each multi-antenna terminal can optionally offload its local tasks to either multiple mobile-edge servers for distributed computation or the cloud server for centralized computation while satisfying the sensing requirements and power constraint. The above offloading problem is formulated as a mixed-integer programming and non-convex problem, which can be decomposed into three sub-problems, namely, distributed offloading decision, beamforming design, and execution scheduling mechanism. First, the continuous relaxation and penalty-based techniques are applied to tackle the distributed offloading strategy. Then, the weighted minimum mean square error (WMMSE) and successive convex approximation (SCA)-based lower bound are utilized to design the integrated communication and sensing (ISAC) beamforming. Finally, the other resources can be judiciously scheduled to minimize the maximum latency. A rigorous convergence analysis and numerical results substantiate the effectiveness of our method. Furthermore, simulation results demonstrate that multi-point cooperation in cell-free massive MIMO-enabled ICCS significantly reduces overall computation latency, in comparison to the benchmark schemes.

eess.SP↗

Novel Synchronization Scheme for Cooperative ISAC Systems

Carrier frequency and timing synchronization play the fundamental roles in cooperative integrating communication and sensing (ISAC). To mitigate the effects of synchronization error, this paper develops a novel synchronization scheme in cell-free massive multiple-input multiple-output (mMIMO) systems. First, we characterize the impacts of pilot contamination on synchronization performance, i.e., Cramer-Rao bound (CRB). Furthermore, a maximum likelihood algorithm is presented to estimate the CFO and TO among the pairing APs. Then, to minimize the sum of CRBs, we devise a synchronization strategy based on a pilot-sharing scheme by jointly optimizing the cluster classification, synchronization overhead, and pilot-sharing scheme, while simultaneously considering the overhead and each AP's synchronization requirements. To solve this NP-hard problem, we simplify it into two sub-problems, namely cluster classification problem and the pilot sharing problem. To strike a balance between synchronization performance and overhead, we first classify the clusters by using the K-means algorithm, and propose a criteria to find a good set of master APs. Then, the pilot-sharing scheme is obtained by using the swap-matching operations. Simulation results validate the accuracy of our derivations and demonstrate the effectiveness of the proposed scheme over the benchmark schemes.

eess.SP↗

From Partial Calibration to Full Potential: A Two-Stage Sparse DOA Estimation for Incoherently-Distributed Sources with Gain-Phase Uncertainty

Direction-of-arrival (DOA) estimation for incoherently distributed (ID) sources is essential in multipath wireless communication scenarios, yet it remains challenging due to the combined effects of angular spread and gain-phase uncertainties in antenna arrays. This paper presents a two-stage sparse DOA estimation framework, transitioning from partial calibration to full potential, under the generalized array manifold (GAM) framework. In the first stage, coarse DOA estimates are obtained by exploiting the output from a subset of partly-calibrated arrays (PCAs). In the second stage, these estimates are utilized to determine and compensate for gain-phase uncertainties across all array elements. Then a sparse total least-squares optimization problem is formulated and solved via alternating descent to refine the DOA estimates. Simulation results demonstrate that the proposed method attained improved estimation accuracy compared to existing approaches, while maintaining robustness against both noise and angular spread effects in practical multipath environments.

eess.SP↗

Towards Intelligent Antenna Positioning: Leveraging DRL for FAS-Aided ISAC Systems

Fluid antenna systems (FAS) enable dynamic antenna positioning, offering new opportunities to enhance integrated sensing and communication (ISAC) performance. However, existing studies primarily focus on communication enhancement or single-target sensing, leaving multi-target scenarios underexplored. Additionally, the joint optimization of beamforming and antenna positions poses a highly non-convex problem, with traditional methods becoming impractical as the number of fluid antennas increases. To address these challenges, this letter proposes a block coordinate descent (BCD) framework integrated with a deep reinforcement learning (DRL)-based approach for intelligent antenna positioning. By leveraging the deep deterministic policy gradient (DDPG) algorithm, the proposed framework efficiently balances sensing and communication performance. Simulation results demonstrate the scalability and effectiveness of the proposed approach.

eess.SP↗

RIS-Assisted Simultaneous Legitimate Monitoring and Jamming for Industrial Wireless Networks

In this paper, we study reconfigurable intelligent surface (RIS)-assisted simultaneous legitimate monitoring and jamming techniques for industrial environments, so that egitimate monitor (LM) and legitimate jammers (LJs) can sustainably monitor and interfere with suspicious communications with minimum transmission power. Specifically, we propose a Block Coordinate Descent-Particle Swarm Optimization (BCD-PSO) based scheme to optimize RIS's phase shift matrix and minimize LJs' transmission power, while successfully jamming and stably monitoring unauthorized communications. Simulation results demonstrate that the proposed BCD-PSO can enhance the performances in terms of monitoring, resource utilization and robustness. Moreover, we effectively exam the best deployment of RIS towards diverse objectives.

eess.SY↗

Rethinking Hardware Impairments in Multi-User Systems: Can FAS Make a Difference?

In this paper, we analyze the role of fluid antenna systems (FAS) in multi-user systems with hardware impairments (HIs). Specifically, we investigate a scenario where a base station (BS) equipped with multiple fluid antennas communicates with multiple users (CUs), each equipped with a single fluid antenna. Our objective is to maximize the minimum communication rate among all users by jointly optimizing the BS's transmit beamforming, the positions of its transmit fluid antennas, and the positions of the CUs' receive fluid antennas. To address this non-convex problem, we propose a block coordinate descent (BCD) algorithm integrating semidefinite relaxation (SDR), rank-one constraint relaxation (SRCR), successive convex approximation (SCA), and majorization-minimization (MM). Simulation results demonstrate that FAS significantly enhances system performance and robustness, with notable gains when both the BS and CUs are equipped with fluid antennas. Even under low transmit power conditions, deploying FAS at the BS alone yields substantial performance gains. However, the effectiveness of FAS depends on the availability of sufficient movement space, as space constraints may limit its benefits compared to fixed antenna strategies. Our findings highlight the potential of FAS to mitigate HIs and enhance multi-user system performance, while emphasizing the need for practical deployment considerations.

eess.SP↗

Fluid Antenna Systems Enabling 6G:Principles, Applications, and Research Directions

Fluid antenna system (FAS) as a new version of reconfigurable antenna technologies promoting shape and position flexibility, has emerged as an exciting and possibly transformative technology for wireless communications systems. FAS represents any software-controlled fluidic, conductive or dielectric structure that can dynamically alter antenna's shape and position to change the gain, the radiation pattern, the operating frequency, and other critical radiation characteristics. With its capability, it is highly anticipated that FAS can contribute greatly to the upcoming sixth generation (6G) wireless networks. This article substantiates this thought by addressing four major questions: 1) Is FAS crucial to 6G? 2) How to characterize FAS? 3) What are the applications of FAS? 4) What are the relevant challenges and future research directions? In particular, five promising research directions that underscore the potential of FAS are discussed. We conclude this article by showcasing the impressive performance of FAS.

eess.SP↗

FAS-Driven Spectrum Sensing for Cognitive Radio Networks

Cognitive radio (CR) networks face significant challenges in spectrum sensing, especially under spectrum scarcity. Fluid antenna systems (FAS) can offer an unorthodox solution due to their ability to dynamically adjust antenna positions for improved channel gain. In this letter, we study a FAS-driven CR setup where a secondary user (SU) adjusts the positions of fluid antennas to detect signals from the primary user (PU). We aim to maximize the detection probability under the constraints of the false alarm probability and the received beamforming of the SU. To address this problem, we first derive a closed-form expression for the optimal detection threshold and reformulate the problem to find its solution. Then an alternating optimization (AO) scheme is proposed to decompose the problem into several sub-problems, addressing both the received beamforming and the antenna positions at the SU. The beamforming subproblem is addressed using a closed-form solution, while the fluid antenna positions are solved by successive convex approximation (SCA). Simulation results reveal that the proposed algorithm provides significant improvements over traditional fixed-position antenna (FPA) schemes in terms of spectrum sensing performance.

eess.SP↗

Unlocking FAS-RIS Security Analysis with Block-Correlation Model

In this letter, we investigate the security of fluid antenna system (FAS)-reconfigurable intelligent surfaces (RIS) communication systems. The base station (BS) employs a single fixed-position antenna, while both the legitimate receiver and the eavesdropper are equipped with fluid antennas. By utilizing the block-correlation model and the central limit theorem (CLT), we derive approximate expressions for the average secrecy capacity and secrecy outage probability (SOP). Our analysis, validated by simulation results, demonstrates the effectiveness of the block-correlation model in accurately assessing the security performance. Moreover, simulation results reveal that FAS-RIS system significantly outperforms other systems in terms of security, further underscoring its potential in secure communication applications.

eess.SP↗

Near-Field Mobile Tracking: A Framework of Using XL-RIS Information

This paper introduces a novel mobile tracking framework leveraging the high-dimensional signal received from extremely large-scale (XL) reconfigurable intelligent surfaces (RIS). This received signal, named XL-RIS information, has a much larger data dimension and therefore offers a richer feature set compared to the traditional base station (BS) received signal, i.e., BS information, enabling more accurate tracking of mobile users (MUs). As the first step, we present an XL-RIS information reconstruction (XL-RIS-IR) algorithm to reconstruct the high-dimensional XL-RIS information from the low-dimensional BS information. Building on this, this paper proposes a comprehensive framework for mobile tracking, consisting of a Feature Extraction Module and a Mobile Tracking Module. The Feature Extraction Module incorporates a convolutional neural network (CNN) extractor for spatial features, a time and frequency (T$\&$F) extractor for domain features, and a near-field angles of arrival (AoAs) extractor for capturing AoA features within the XL-RIS. These features are combined into a comprehensive feature vector, forming a time-varying sequence fed into the Mobile Tracking Module, which employs an Auto-encoder (AE) with a stacked bidirectional long short-term memory (Bi-LSTM) encoder and a standard LSTM decoder to predict MUs' positions in the upcoming time slot. Simulation results confirm that the tracking accuracy of our proposed framework is significantly enhanced by using reconstructed XL-RIS information and exhibits substantial robustness to signal-to-noise ratio (SNR) variations.

eess.SP↗

A Framework of FAS-RIS Systems: Performance Analysis and Throughput Optimization

In this paper, we investigate reconfigurable intelligent surface (RIS)-assisted communication systems which involve a fixed-antenna base station (BS) and a mobile user (MU) that is equipped with fluid antenna system (FAS). Specifically, the RIS is utilized to enable communication for the user whose direct link from the base station is blocked by obstacles. We propose a comprehensive framework that provides transmission design for both static scenarios with the knowledge of channel state information (CSI) and harsh environments where CSI is hard to acquire. It leads to two approaches: a CSI-based scheme where CSI is available, and a CSI-free scheme when CSI is inaccessible. Given the complex spatial correlations in FAS, we employ block-diagonal matrix approximation and independent antenna equivalent models to simplify the derivation of outage probabilities in both cases. Based on the derived outage probabilities, we then optimize the throughput of the FAS-RIS system. For the CSI-based scheme, we first propose a gradient ascent-based algorithm to obtain a near-optimal solution. Then, to address the possible high computational complexity in the gradient algorithm, we approximate the objective function and confirm a unique optimal solution accessible through a bisection search method. For the CSI-free scheme, we apply the partial gradient ascent algorithm, reducing complexity further than full gradient algorithms. We also approximate the objective function and derive a locally optimal closed-form solution to maximize throughput. Simulation results validate the effectiveness of the proposed framework for the transmission design in FAS-RIS systems.

eess.SP↗

Exploit High-Dimensional RIS Information to Localization: What Is the Impact of Faulty Element?

This paper proposes a novel localization algorithm using the reconfigurable intelligent surface (RIS) received signal, i.e., RIS information. Compared with BS received signal, i.e., BS information, RIS information offers higher dimension and richer feature set, thereby providing an enhanced capacity to distinguish positions of the mobile users (MUs). Additionally, we address a practical scenario where RIS contains some unknown (number and places) faulty elements that cannot receive signals. Initially, we employ transfer learning to design a two-phase transfer learning (TPTL) algorithm, designed for accurate detection of faulty elements. Then our objective is to regain the information lost from the faulty elements and reconstruct the complete high-dimensional RIS information for localization. To this end, we propose a transfer-enhanced dual-stage (TEDS) algorithm. In \emph{Stage I}, we integrate the CNN and variational autoencoder (VAE) to obtain the RIS information, which in \emph{Stage II}, is input to the transferred DenseNet 121 to estimate the location of the MU. To gain more insight, we propose an alternative algorithm named transfer-enhanced direct fingerprint (TEDF) algorithm which only requires the BS information. The comparison between TEDS and TEDF reveals the effectiveness of faulty element detection and the benefits of utilizing the high-dimensional RIS information for localization. Besides, our empirical results demonstrate that the performance of the localization algorithm is dominated by the high-dimensional RIS information and is robust to unoptimized phase shifts and signal-to-noise ratio (SNR).

eess.SP↗

Employing High-Dimensional RIS Information for RIS-aided Localization Systems

Reconfigurable intelligent surface (RIS)-aided localization systems have attracted extensive research attention due to their accuracy enhancement capabilities. However, most studies primarily utilized the base stations (BS) received signal, i.e., BS information, for localization algorithm design, neglecting the potential of RIS received signal, i.e., RIS information. Compared with BS information, RIS information offers higher dimension and richer feature set, thereby significantly improving the ability to extract positions of the mobile users (MUs). Addressing this oversight, this paper explores the algorithm design based on the high-dimensional RIS information. Specifically, we first propose a RIS information reconstruction (RIS-IR) algorithm to reconstruct the high-dimensional RIS information from the low-dimensional BS information. The proposed RIS-IR algorithm comprises a data processing module for preprocessing BS information, a convolution neural network (CNN) module for feature extraction, and an output module for outputting the reconstructed RIS information. Then, we propose a transfer learning based fingerprint (TFBF) algorithm that employs the reconstructed high-dimensional RIS information for MU localization. This involves adapting a pre-trained DenseNet-121 model to map the reconstructed RIS signal to the MU's three-dimensional (3D) position. Empirical results affirm that the localization performance is significantly influenced by the high-dimensional RIS information and maintains robustness against unoptimized phase shifts.

eess.SP↗