arXiv subjects

Maged Elkashlan

Publications and source records attributed to Maged Elkashlan.

At least 55 records · Page 3Linked to original sources

arXiv2024

Employing High-Dimensional RIS Information for RIS-aided Localization Systems

Reconfigurable intelligent surface (RIS)-aided localization systems have attracted extensive research attention due to their accuracy enhancement capabilities. However, most studies primarily utilized the base stations (BS) received signal, i.e., BS information, for localization algorithm design, neglecting the potential of RIS received signal, i.e., RIS information. Compared with BS information, RIS information offers higher dimension and richer feature set, thereby significantly improving the ability to extract positions of the mobile users (MUs). Addressing this oversight, this paper explores the algorithm design based on the high-dimensional RIS information. Specifically, we first propose a RIS information reconstruction (RIS-IR) algorithm to reconstruct the high-dimensional RIS information from the low-dimensional BS information. The proposed RIS-IR algorithm comprises a data processing module for preprocessing BS information, a convolution neural network (CNN) module for feature extraction, and an output module for outputting the reconstructed RIS information. Then, we propose a transfer learning based fingerprint (TFBF) algorithm that employs the reconstructed high-dimensional RIS information for MU localization. This involves adapting a pre-trained DenseNet-121 model to map the reconstructed RIS signal to the MU's three-dimensional (3D) position. Empirical results affirm that the localization performance is significantly influenced by the high-dimensional RIS information and maintains robustness against unoptimized phase shifts.

eess.SP↗

arXiv2024

Two-Timescale Design for Reconfigurable Intelligent Surface-Aided URLLC

In this paper, to tackle the blockage issue in massive multiple-input-multiple-output (mMIMO) systems, a reconfigurable intelligent surface (RIS) is seamlessly deployed to support devices with ultra-reliable and low-latency communications (URLLC). The transmission power of the base station and the phase shifts of the RIS are jointly devised to maximize the weighted sum rate while considering the spatially correlation and channel estimation errors. Firstly, \textcolor{black}{the relationship between the channel estimation error and spatially correlated RIS's elements is revealed by using the linear minimum mean square error}. Secondly, based on the maximum-ratio transmission precoding, a tight lower bound of the rate under short packet transmission is derived. Finally, the NP-hard problem is decomposed into two optimization problems, where the transmission power is obtained by geometric programming and phase shifts are designed by using gradient ascent method. Besides, we have rigorously proved that the proposed algorithm can rapidly converge to a sub-optimal solution with low complexity. Simulation results confirm the tightness between the analytic results and Monte Carlo simulations. Furthermore, the two-timescale scheme provides a practical solution for the short packet transmission.

eess.SP↗

arXiv2024

Active RIS-Aided Massive MIMO With Imperfect CSI and Phase Noise

Active reconfigurable intelligent surface (RIS) has attracted significant attention as a recently proposed RIS architecture. Owing to its capability to amplify the incident signals, active RIS can mitigate the multiplicative fading effect inherent in the passive RIS-aided system. In this paper, we consider an active RIS-aided uplink multi-user massive multiple-input multiple-output (MIMO) system in the presence of phase noise at the active RIS. Specifically, we employ a two-timescale scheme, where the beamforming at the base station (BS) is adjusted based on the instantaneous aggregated channel state information (CSI) and the statistical CSI serves as the basis for designing the phase shifts at the active RIS, so that the feedback overhead and computational complexity can be significantly reduced. The aggregated channel composed of the cascaded and direct channels is estimated by utilizing the linear minimum mean square error (LMMSE) technique. Based on the estimated channel, we derive the analytical closed-form expression of a lower bound of the achievable rate. The power scaling laws in the active RIS-aided system are investigated based on the theoretical expressions. When the transmit power of each user is scaled down by the number of BS antennas M or reflecting elements N, we find that the thermal noise will cause the lower bound of the achievable rate to approach zero, as the number of M or N increases to infinity. Moreover, an optimization approach based on genetic algorithms (GA) is introduced to tackle the phase shift optimization problem. Numerical results reveal that the active RIS can greatly enhance the performance of the considered system under various settings.

cs.IT↗

arXiv2024

RIS-Aided Localization Algorithm and Analysis: Tackling Non-Gaussian Angle Estimation Errors

Reconfigurable intelligent surface (RIS)-aided localization systems are increasingly recognized for enhancing accuracy in internet of things (IoT) networks. However, prevailing studies tend to either assume a Gaussian distribution for angle estimation error (AEE) or directly neglect the impact of the AEE, overlooking its non-Gaussian nature in real-world scenarios, particularly with diverse estimation methods (e.g., 2D-DFT algorithm). Addressing this oversight, this paper explores the design and performance analysis of RIS-aided localization systems, specifically tackling non-Gaussian AEE. We adopt the classical two-step three-dimensional (3D) localization scheme to determine the position of mobile user (MU). Initially, we estimate angles of arrival (AoAs) and time differences of arrival (TDoAs) at the RIS using different methods, resulting in non-Gaussian and Gaussian errors, respectively. Subsequently, to accommodate the non-Gaussian nature of AoAs errors and the Gaussian character of TDoA errors, we design a multiple weighted least squares (mWLS) algorithm to accurately localize MU. Besides, our research also includes a unique bias analysis for evaluating the performance of the proposed localization algorithm under both Gaussian and non-Gaussian errors. Simulation results demonstrate the effectiveness of both the proposed mWLS algorithm and the bias analysis methodology.

eess.SP↗

arXiv2024

Exploring Fairness for FAS-assisted Communication Systems: from NOMA to OMA

This paper addresses the fairness issue within fluid antenna system (FAS)-assisted non-orthogonal multiple access (NOMA) and orthogonal multiple access (OMA) systems, where a single fixed-antenna base station (BS) transmits superposition-coded signals to two users, each with a single fluid antenna. We define fairness through the minimization of the maximum outage probability for the two users, under total resource constraints for both FAS-assisted NOMA and OMA systems. Specifically, in the FAS-assisted NOMA systems, we study both a special case and the general case, deriving a closed-form solution for the former and applying a bisection search method to find the optimal solution for the latter. Moreover, for the general case, we derive a locally optimal closed-form solution to achieve fairness. In the FAS-assisted OMA systems, to deal with the non-convex optimization problem with coupling of the variables in the objective function, we employ an approximation strategy to facilitate a successive convex approximation (SCA)-based algorithm, achieving locally optimal solutions for both cases. Empirical analysis validates that our proposed solutions outperform conventional NOMA and OMA benchmarks in terms of fairness.

eess.SP↗

arXiv2024

Reconfigurable Intelligent Surface-Aided Dual-Function Radar and Communication Systems With MU-MIMO Communication

In this paper, we investigate an reconfigurable intelligent surface (RIS)-aided integrated sensing and communication (ISAC) system. Our objective is to maximize the achievable sum rate of the multi-antenna communication users through the joint active and passive beamforming. {Specifically}, the weighted minimum mean-square error (WMMSE) method is { first} used to reformulate the original problem into an equivalent one. Then, we utilize an alternating optimization (AO) { algorithm} to decouple the optimization variables and decompose this challenging problem into two subproblems. Given reflecting coefficients, a penalty-based algorithm is utilized to deal with the non-convex radar signal-to-noise ratio (SNR) constraints. For the given beamforming matrix of the BS, we apply majorization-minimization (MM) to transform the problem into a quadratic constraint quadratic programming (QCQP) problem, which is ultimately solved using a semidefinite relaxation (SDR)-based algorithm. Simulation results illustrate the advantage of deploying RIS in the considered multi-user MIMO (MU-MIMO) ISAC systems.

eess.SP↗

arXiv2024

FAS-assisted Wireless Powered Communication Systems

Fluid Antenna System (FAS) is recognized as a promising technology for enhancing communication performance. In this context, we explored the potential of FAS-assisted wireless powered communication systems. Specifically, the transmitter, equipped with FAS, harvests the radio frequency (RF) signal from a power beacon and utilizes the harvested energy for data transmission to the receiver. To evaluate the performance of the considered systems, we derive both the analytical and asymptotic expressions of the outage probability. Simulation results indicate that the diversity of the considered network closely aligns with the number of ports. Besides, it is also revealed that the port selection criteria based solely on single-hop configurations yield a diversity order of only one.

eess.SP↗

arXiv2023

FAS-assisted NOMA Short-Packet Communication Systems

In this paper, we investigate a fluid antenna system (FAS)-assisted downlink non-orthogonal multiple access (NOMA) for short-packet communications. The base station (BS) adopts a single fixed antenna, while both the central user (CU) and the cell-edge user (CEU) are equipped with a FAS. Each FAS comprises $N$ flexible positions (also known as ports), linked to $N$ arbitrarily correlated Rayleigh fading channels. We derive expressions for the average block error rate (BLER) of the FAS-assisted NOMA system and provide asymptotic BLER expressions. We determine that the diversity order for CU and CEU is $N$, indicating that the system performance can be considerably improved by increasing $N$. Simulation results validate the great performance of FAS.

cs.IT↗

arXiv2023

Proactive Monitoring via Jamming in Fluid Antenna Systems

This paper investigates the efficacy of utilizing fluid antenna system (FAS) at a legitimate monitor to oversee suspicious communication. The monitor switches the antenna position to minimize its outage probability for enhancing the monitoring performance. Our objective is to maximize the average monitoring rate, whose expression involves the integral of the first-order Marcum $Q$ function. The optimization problem, as initially posed, is non-convex owing to its objective function. Nevertheless, upon substituting with an upper bound, we provide a theoretical foundation confirming the existence of a unique optimal solution for the modified problem, achievable efficiently by the bisection search method. Furthermore, we also introduce a locally closed-form optimal resolution for maximizing the average monitoring rate. Empirical evaluations confirm that the proposed schemes outperform conventional benchmarks considerably.

eess.SP↗

arXiv2023

On Performance of Fluid Antenna System using Maximum Ratio Combining

This letter investigates a fluid antenna system (FAS) where multiple ports can be activated for signal combining for enhanced receiver performance. Given $M$ ports at the FAS, the best $K$ ports out of the $M$ available ports are selected before maximum ratio combining (MRC) is used to combine the received signals from the selected ports. The aim of this letter is to study the achievable performance of FAS when more than one ports can be activated. We do so by analyzing the outage probability of this setup in Rayleigh fading channels through the utilization of Gauss-Chebyshev integration, lower bound estimation, and high signal-to-noise ratio (SNR) asymptotic approximations. Our analytical results demonstrate that FAS can harness rich spatial diversity, which is confirmed by computer simulations.

eess.SP↗

arXiv2023

Resource Allocation for Cell-Free Massive MIMO-aided URLLC Systems Relying on Pilot Sharing

Resource allocation is conceived for cell-free (CF) massive multi-input multi-output (MIMO)-aided ultra-reliable and low latency communication (URLLC) systems. Specifically, to support multiple devices with limited pilot overhead, pilot reuse among the users is considered, where we formulate a joint pilot length and pilot allocation strategy for maximizing the number of devices admitted. Then, the pilot power and transmit power are jointly optimized while simultaneously satisfying the devices' decoding error probability, latency, and data rate requirements. Firstly, we derive the lower bounds (LBs) of ergodic data rate under finite channel blocklength (FCBL). Then, we propose a novel pilot assignment algorithm for maximizing the number of devices admitted. Based on the pilot allocation pattern advocated, the weighted sum rate (WSR) is maximized by jointly optimizing the pilot power and payload power. To tackle the resultant NP-hard problem, the original optimization problem is first simplified by sophisticated mathematical transformations, and then approximations are found for transforming the original problems into a series of subproblems in geometric programming (GP) forms that can be readily solved. Simulation results demonstrate that the proposed pilot allocation strategy is capable of significantly increasing the number of admitted devices and the proposed power allocation achieves substantial WSR performance gain.

eess.SP↗

arXiv2023

Resource Allocation for Cell-free Massive MIMO-enabled URLLC Downlink Systems

Ultra-reliable and low-latency communication (URLLC) is a pivotal technique for enabling the wireless control over industrial Internet-of-Things (IIoT) devices. By deploying distributed access points (APs), cell-free massive multiple-input and multiple-output (CF mMIMO) has great potential to provide URLLC services for IIoT devices. In this paper, we investigate CF mMIMO-enabled URLLC in a smart factory. Lower bounds (LBs) of downlink ergodic data rate under finite channel blocklength (FCBL) with imperfect channel state information (CSI) are derived for maximum-ratio transmission (MRT), full-pilot zero-forcing (FZF), and local zero-forcing (LZF) precoding schemes. Meanwhile, the weighted sum rate is maximized by jointly optimizing the pilot power and transmission power based on the derived LBs. Specifically, we first provide the globally optimal solution of the pilot power, and then introduce some approximations to transform the original problems into a series of subproblems, which can be expressed in a geometric programming (GP) form that can be readily solved. Finally, an iterative algorithm is proposed to optimize the power allocation based on various precoding schemes. Simulation results demonstrate that the proposed algorithm is superior to the existing algorithms, and that the quality of URLLC services will benefit by deploying more APs, except for the FZF precoding scheme.

cs.IT↗

arXiv2022

Resource Allocation for Uplink Cell-Free Massive MIMO enabled URLLC in a Smart Factory

Smart factories need to support the simultaneous communication of multiple industrial Internet-of-Things (IIoT) devices with ultra-reliability and low-latency communication (URLLC). Meanwhile, short packet transmission for IIoT applications incurs performance loss compared to traditional long packet transmission for human-to-human communications. On the other hand, cell-free massive multiple-input and multiple-output (CF mMIMO) technology can provide uniform services for all devices by deploying distributed access points (APs). In this paper, we adopt CF mMIMO to support URLLC in a smart factory. Specifically, we first derive the lower bound (LB) on achievable uplink data rate under the finite blocklength (FBL) with imperfect channel state information (CSI) for both maximum-ratio combining (MRC) and full-pilot zero-forcing (FZF) decoders. \textcolor{black}{The derived LB rates based on the MRC case have the same trends as the ergodic rate, while LB rates using the FZF decoder tightly match the ergodic rates}, which means that resource allocation can be performed based on the LB data rate rather the exact ergodic data rate under FBL. The \textcolor{black}{log-function method} and successive convex approximation (SCA) are then used to approximately transform the non-convex weighted sum rate problem into a series of geometric program (GP) problems, and an iterative algorithm is proposed to jointly optimize the pilot and payload power allocation. Simulation results demonstrate that CF mMIMO significantly improves the average weighted sum rate (AWSR) compared to centralized mMIMO. An interesting observation is that increasing the number of devices improves the AWSR for CF mMIMO whilst the AWSR remains relatively constant for centralized mMIMO.

cs.IT↗

arXiv2022

Joint Angle Estimation Error Analysis and 3D Positioning Algorithm Design for mmWave Positioning System

In this paper, we propose a comprehensive framework to jointly analyze the angle estimation error and design the three-dimensional (3D) positioning algorithm for a millimeter wave (mmWave) positioning system. First, we estimate the angles of arrival (AoAs) at the anchors by applying the two-dimensional discrete Fourier transform (2D-DFT) algorithm. Based on the property of the 2D-DFT algorithm, the angle estimation error is analyzed in terms of probability density functions (PDF). The analysis shows that the derived angle estimation error is non-Gaussian, which is different from the existing work. Second, the intricate expression of the PDF of the AoA estimation error is simplified by employing the first-order linear approximation of triangle functions. Then, we derive a complex expression for the variance based on the derived PDF. Specifically, for the azimuth estimation error, the variance is separately integrated according to the different non-zero intervals of the PDF. Finally, we apply the weighted least square (WLS) algorithm to estimate the 3D position of the MU by using the estimated AoAs and the obtained non-Gaussian variance. Extensive simulation results confirm that the derived angle estimation error is non-Gaussian, and also demonstrate the superiority of the proposed framework.

eess.SP↗

arXiv2022

Fingerprint Based mmWave Positioning System Aided by Reconfigurable Intelligent Surface

Reconfigurable intelligent surface (RIS) is a promising technique for millimeter wave (mmWave) positioning systems. In this paper, we consider multiple mobile users (MUs) positioning problem in the multiple-input multiple-output (MIMO) time-division duplex (TDD) mmWave systems aided by the RIS. We derive the expression for the space-time channel response vector (STCRV) as a novel type of fingerprint. The STCRV consists of the multipath channel characteristics, e.g., time delay and angle of arrival (AOA), which is related to the position of the MU. By using the STCRV as input, we propose a novel residual convolution network regression (RCNR) learning algorithm to output the estimated three-dimensional (3D) position of the MU. Specifically, the RCNR learninng algorithm includes a data processing block to process the input STCRV, a normal convolution block to extract the features of STCRV, four residual convolution blocks to further extract the features and protect the integrity of the features, and a regression block to estimate the 3D position. Extensive simulation results are also presented to demonstrate that the proposed RCNR learning algorithm outperforms the traditional convolution neural network (CNN).

eess.SP↗

arXiv2022

Two-Timescale Design for Reconfigurable Intelligent Surface-Aided Massive MIMO Systems with Imperfect CSI

This paper investigates the two-timescale transmission design for reconfigurable intelligent surface (RIS)-aided massive multiple-input multiple-output (MIMO) systems, where the beamforming at the base station (BS) is adapted to the rapidly-changing instantaneous channel state information (CSI), while the passive beamforming at the RIS is adapted to the slowly-changing statistical CSI. Specifically, we first propose a linear minimum mean square error (LMMSE) estimator to obtain the aggregated channel from the users to the BS in each channel coherence interval. Based on the estimated channel, we apply the low-complexity maximal ratio combining (MRC) beamforming at the BS, and then derive the ergodic achievable rate in a closed form expression. To draw design insights, we perform a detailed theoretical analysis departing from the derived ergodic achievable rate. If the BS-RIS channel is Rician distributed, we prove that the transmit power can be scaled proportionally to $1/M$, as the number of BS antennas, $M$, grows to infinity while maintaining a non-zero rate. If the BS-RIS channel is Rayleigh distributed, the transmit power can be scaled either proportionally to $1/\sqrt{M}$ as $M$ grows large, or proportionally to $1/N$ as the number of reflecting elements, $N$, grows large, while still maintaining a non-zero rate. By capitalizing on the derived expression of the data rate under the statistical knowledge of the CSI, we maximize the minimum user rate by designing the passive beamforming at the RIS. Numerical results confirm that, even in the presence of imperfect CSI, the integration of an RIS in massive MIMO systems results in promising performance gains. In addition, the obtained results reveal that it is favorable to place the RIS close to the users rather than close to the BS.

cs.IT↗

arXiv2022

Performance Analysis and Optimization for RIS-Assisted Multi-User Massive MIMO Systems with Imperfect Hardware

The paper studies a reconfigurable intelligent surface (RIS)-assisted multi-user uplink massive multiple-input multiple-output (MIMO) system with imperfect hardware. At the RIS, the paper considers phase noise, while at the base station, the paper takes into consideration the radio frequency impairments and low-resolution analog-to-digital converters. The paper derives approximate expressions for the ergodic achievable rate in closed forms under Rician fading channels. For the cases of infinite numbers of antennas and infinite numbers of reflecting elements, asymptotic data rates are derived to provide new design insights. The derived power scaling laws indicate that while guaranteeing a required system performance, the transmit power of the users can be scaled down at most by the factor 1/M when M goes infinite, or by the factor 1/(MN) when M and N go infinite, where M is the number of antennas and N is the number of the reflecting units. Furthermore, an optimization algorithm is proposed based on the genetic algorithm to solve the phase shift optimization problem with the aim of maximizing the sum rate of the system. Additionally, the optimization problem with discrete phase shifts is considered. Finally, numerical results are provided to validate the correctness of the analytical results.

cs.IT↗

arXiv2022

Secrecy Performance Analysis of RIS-aided Communication System with Randomly Flying Eavesdroppers

In this letter, we analyze the secrecy performance of a reconfigurable intelligent surface (RIS)-aided communication system with spatially random unmanned aerial vehicles (UAVs) acting as eavesdroppers. We consider the scenarios where the base station (BS) is equipped with single and multiple antennas.The signal-to-noise ratios (SNRs) of the legitimate user and the eavesdroppers are derived analytically and approximated through a computationally effective method. The ergodic secrecy capacity is approximated and derived in closed-form expressions.Simulation results validate the accuracy of the analytical and approximate expressions and show the security-enhanced effect of the deployment of the RIS.

cs.IT↗