arXiv subjects

Manabu Kiguchi

Publications and source records attributed to Manabu Kiguchi.

At least 19 recordsLinked to original sources

arXiv2017

Controlling the thermoelectric effect by mechanical manipulation of the electron's quantum phase in atomic junctions

The thermoelectric voltage developed across an atomic metal junction (i.e., a nanostructure in which one or a few atoms connect two metal electrodes) in response to a temperature difference between the electrodes, results from the quantum interference of electrons that pass through the junction multiple times after being scattered by the surrounding defects. Here we report successfully tuning this quantum interference and thus controlling the magnitude and sign of the thermoelectric voltage by applying a mechanical force that deforms the junction. The observed switching of the thermoelectric voltage is reversible and can be cycled many times. Our ab initio and semi-empirical calculations elucidate the detailed mechanism by which the quantum interference is tuned. We show that the applied strain alters the quantum phases of electrons passing through the narrowest part of the junction and hence modifies the electronic quantum interference in the device. Tuning the quantum interference causes the energies of electronic transport resonances to shift, which affects the thermoelectric voltage. These experimental and theoretical studies reveal that Au atomic junctions can be made to exhibit both positive and negative thermoelectric voltages on demand, and demonstrate the importance and tunability of the quantum interference effect in the atomic-scale metal nanostructures.

cond-mat.mtrl-sci↗

arXiv2016

Data Mining Graphene: Correlative Analysis of Structure and Electronic Degrees of Freedom in Graphenic Monolayers with Defects

The link between changes in the material crystal structure and its mechanical, electronic, magnetic, and optical functionalities - known as the structure-property relationship - is the cornerstone of the contemporary materials science research. The recent advances in scanning transmission electron and scanning probe microscopies (STEM and SPM) have opened an unprecedented path towards examining the materials structure-property relationships on the single-impurity and atomic-configuration levels. Lacking, however, are the statistics-based approaches for cross-correlation of structure and property variables obtained in different information channels of the STEM and SPM experiments. Here we have designed an approach based on a combination of sliding window fast Fourier transform, Pearson correlation matrix, and linear and kernel canonical correlation, to study a relationship between lattice distortions and electron scattering from SPM data on graphene with defects. Our analysis revealed that the strength of coupling to strain is altered between different scattering channels, which can explain coexistence of several quasiparticle interference patterns in nanoscale regions of interest. In addition, the application of kernel functions allowed us to extract a non-linear component of the relationship between the lattice strain and scattering intensity in graphene. The outlined approach can be further utilized towards analyzing correlations in various multi-modal imaging techniques where the information of interest is spatially distributed and generally has a complex multidimensional nature.

cond-mat.mtrl-sci↗

arXiv2016

Site selection in single-molecule junction for highly reproducible molecular electronics

Adsorption sites of molecules critically determine the electric/photonic properties and its stability of heterogeneous molecule-metal interfaces. Then, selectivity of adsorption site is essential for development of the fields including organic electronics, catalysis, and biology. However, due to current technical limitations, site-selectivity remains a major challenge because of difficulty in precise selection of meaningful one among the sites. Here, we report the single site-selection at a single-molecule junction by performing newly developed hybrid technique: simultaneous characterization of surface enhanced Raman scattering (SERS) and current-voltage (I-V) measurements. The I-V response of 1,4-benzenedithiol junctions, reveals the existence of three meta-stable states arising from different adsorption sites. Notably, correlated SERS measurements show selectivity towards one of the adsorption sites, bridge sites. This site-selectivity represents an essential step towards the reliable integration of individual molecules on metallic surfaces. Furthermore, the hybrid spectro-electric technique reveals the dependence of the SERS intensity on the strength of the molecule-metal interaction, showing the interdependence between the optical and electronic properties in single-molecule junctions.

cond-mat.mtrl-sci↗

arXiv2014

Direct imaging of monovacancy-hydrogen complexes in single graphitic layer

Understanding how foreign chemical species bond to atomic vacancies in graphene layers can advance our ability to tailor the electronic and magnetic properties of defective graphenic materials. Here we use ultra-high vacuum scanning tunneling microscopy (UHV-STM) and density functional theory to identify the precise structure of hydrogenated single atomic vacancies in a topmost graphene layer of graphite and establish a connection between the details of hydrogen passivation and the electronic properties of a single atomic vacancy. Monovacancy-hydrogen complexes are prepared by sputtering of the graphite surface layer with low energy ions and then exposing it briefly to an atomic hydrogen environment. High-resolution experimental UHV-STM imaging allows us to determine unambiguously the positions of single missing atoms in the defective graphene lattice and, in combination with the ab initio calculations, provides detailed information about the distribution of low-energy electronic states on the periphery of the monovacancy-hydrogen complexes. We found that a single atomic vacancy where each sigma-dangling bond is passivated with one hydrogen atom shows a well-defined signal from the non-bonding pi-state which penetrates into the bulk with a (\sqrt 3 \times \sqrt 3)R30^ \circ periodicity. However, a single atomic vacancy with full hydrogen termination of sigma-dangling bonds and additional hydrogen passivation of the extended pi-state at one of the vacancy's monohydrogenated carbon atoms is characterized by complete quenching of low-energy localized states. In addition, we discuss the migration of hydrogen atoms at the periphery of the monovacancy-hydrogen complexes which dramatically change the vacancy's low-energy electronic properties, as observed in our low-bias high-resolution STM imaging.

cond-mat.mtrl-sci↗

arXiv2011

Observation of Magnetic Edge State and Dangling Bond State on Nanographene in Activated Carbon Fibers

The electronic structure of nanographene in pristine and fluorinated activated carbon fibers (ACFs) have been investigated with near-edge x-ray absorption fine structure (NEXAFS) and compared with magnetic properties we reported on previously. In pristine ACFs in which magnetic properties are governed by non-bonding edge states of the π-electron, a pre-peak assigned to the edge state was observed below the conduction electron π* peak close to the Fermi level in NEXAFS. Via the fluorination of the ACFs, an extra peak, which was assigned to the σ-dangling bond state, was observed between the pre-peak of the edge state and the π* peak in the NEXAFS profile. The intensities of the extra peak correlate closely with the spin concentration created upon fluorination. The combination of the NEXAFS and magnetic measurement results confirms the coexistence of the magnetic edge states of π-electrons and dangling bond states of σ-electrons on fluorinated nanographene sheets.

cond-mat.mtrl-sci↗

arXiv2010

Formation of the Pd atomic chain in hydrogen atmosphere

The formation of a Pd atomic chain in a hydrogen atmosphere was investigated by measurements of conductance and vibrational spectroscopy of a single molecular junction, and the theoretical calculation. While atomic chains were not formed for clean 3d and 4d metals, in the case of Pd (a 4d metal) atomic chains could be formed in the presence of hydrogen. Stable atomic chains with two different atomic configurations were formed when the Pd atomic contact was stretched in a H$_{2}$ atmosphere; highly conductive short hydrogen adsorbed atomic chain and low conductive long hydrogen incorporated atomic chain.

cond-mat.mes-hall↗

arXiv2010

Electric Conductance of Rh Atomic Contacts under Electrochemical Potential Control

The electric conductance of Rh atomic contacts was investigated under the electrochemical potential control. The conductance histogram of Rh atomic contacts varied with the electrochemical potential. When the electrochemical potential of the contact was kept at $Φ_{0}$= 0.1 V vs. Ag/AgCl (Rh potential), the conductance histogram did not show any features. At $Φ_{0}$= -0.1 V (under potential deposited hydrogen potential), the conductance histogram showed a feature around 2.3 $G_{0}$ ($G_{0}$ =2$e^{2}/h$), which agreed with the conductance value of a clean Rh atomic contact, which was observed in ultrahigh vacuum at low temperature. At $Φ_{0}$= -0.25 V (over potential deposited hydrogen potential), the conductance histogram showed features around 0.3 and 1.0 $G_{0}$. The conductance behavior of the Rh atomic contact was discussed by comparing previously reported results of other metals, Au, Ag, Cu, Pt, Pd, Ni, Co, and Fe. The conductance behavior of the metal atomic contacts related with the strength of the interaction between hydrogen and metal surface.

cond-mat.mes-hall↗

arXiv2009

Atomic Motion in Single H$_{2}$ and D$_{2}$ Molecule Junction Induced by Phonon Excitation

We have investigated Au atomic contacts in H$_{2}$ and D$_{2}$ environment by conductance measurement and $dI/dV$ spectroscopy. A single H$_{2}$ or D$_{2}$ molecule was found to bridge Au electrodes. In the case of the Au/H$_{2}$/Au junction, symmetric peaks were observed in $dI/dV$ spectra, while they were not observed for the Au/D$_{2}$/Au junction. The shape of the peaks in $dI/dV$ spectra originated from the structural change of the single molecule junction induced by the phonon excitation. The structural change could occur only for the Au/H$_{2}$/Au junction. The difference in the two single molecule junctions could be explained by larger zero point energy of Au-H$_{2}$ vibration mode than that in the Au/H$_{2}$/Au junction.

cond-mat.mtrl-sci↗

arXiv2008

Three reversible states controlled on a gold monoatomic contact by the electrochemical potential

Conductance of an Au mono atomic contact was investigated under the electrochemical potential control. The Au contact showed three different behaviors depending on the potential: 1 $G_{0}$ ($G_{0}$ = $2e^{2}/h$), 0.5 $G_{0}$ and not-well defined values below 1 $G_{0}$ were shown when the potential of the contact was kept at -0.6 V (double layer potential), -1.0 V (hydrogen evolution potential), and 0.8 V (oxide formation potential) versus Ag/AgCl in 0.1 M Na$_{2}$SO$_{4}$ solution, respectively. These three reversible states and their respective conductances could be fully controlled by the electrochemical potential. These changes in the conductance values are discussed based on the proposed structure models of hydrogen adsorbed and oxygen incorporated on an Au mono atomic contact.

cond-mat.mtrl-sci↗

arXiv2006

Conductance of a single molecule anchored by an isocyanide substituent to gold electrodes

The effect of anchoring group on the electrical conductance of a single molecule bridging two Au electrodes was studied using di-substituted (isocyanide (CN-), thiol (S-) or cyanide (NC-)) benzene. The conductance of a single Au/1,4-diisocyanobenzene/Au junction anchored by isocyanide via a C atom (junction with the Au-CN bond) was $3 \times 10 ^{-3} G_{0}$ ($2e^{2}/h$). The value was comparable to $4 \times 10 ^{-3} G_{0}$ of a single Au/1,4-benzenedithiol/Au junction with the Au-S bond. The Au/1,4-dicyanobenzene/Au molecular junction with the Au-NC bond did not show well-defined conductance values. The metal-molecule bond strength was estimated by the distance over which the molecular junction was stretched before breakdown. The stretched length of the molecular junction with the Au-CN bond was comparable to that of the Au junction, indicating that the Au-CN bond was stronger than the Au-Au bond.

cond-mat.mtrl-sci↗

arXiv2006

Fabrication of stable Pd nanowire assisted by hydrogen in solution

We have mechanically fabricated a Pd nanowire in solution under electrochemical potential control. A clear feature appeared in the conductance histogram when the electrochemical potential of the Pd wire was kept at the hydrogen evolution potential. Conductance traces showed the Pd wire was stretched 0.4 nm in length just before breaking, suggesting that at least two Pd atoms might contribute to the formation of the Pd wire. The results indicate that a certain atomic configuration of the Pd nanowire is stabilized by hydrogen. We discuss the stabilization mechanism due to changes in bond strengths caused by hydrogen adsorption or incorporation.

cond-mat.mtrl-sci↗

arXiv2006

Conductance Bistability of Gold Nano-wire at Room Temperature

Quantized conductance behavior of gold nano wires was studied under electrochemical potential control. We fabricated 1 nm long mono atomic wires in solution at room temperature. Electrochemical potential significantly affected the stability of the mono atomic wire and fractional conductance peak occurrence in the conductance histogram. We revealed that the hydrogen adsorption on gold mono atomic wires was a decisive factor of the fractional peak, which was originated from the dynamic structural transition between two bistable states of the mono atomic wire showing the unit and the fractional values of the conductance. We could tune the stability of these bistable states to make the fractional conductance state preferable.

cond-mat.mtrl-sci↗

arXiv2005

Hydrogen-assisted stabilization of Ni nanowires in solution

We have studied conductance characteristics of mechanically fabricated Ni nanoconstrictions under controlling electrochemical potential and pH of the electrolyte. Conductance histogram showed clear feature peaked at 1-1.5 $G_{0}$ (=$2e^{2}/h$) when the potential of the constriction was kept at more negative potential than -900 mV vs. Ag/AgCl in pH=3.7. Comparable feature also appeared at more positive potential when lower pH solution was used. We have revealed that Ni mono atomic contact or mono atomic wire can be stabilized in solution at room temperature under the hydrogen evolution.

cond-mat.mtrl-sci↗

arXiv2005

Electronic properties of metal-induced gap states formed at alkali-halide/metal interfaces

The spatial distribution and site- distribution of metal induced gap states (MIGS) are studied by thickness dependent near edge x-ray absorption fine structure (NEXAFS) and comparing the cation and anion edge NEXAFS. The thickness dependent NEXAFS shows that the decay length of MIGS depends on rather an alkali halide than a metal, and it is larger for alkali halides with smaller band gap energy. By comparing the Cl edge and K edge NEXAFS for KCl/Cu(001), MIGS are found to be states localizing at anion sites.

cond-mat.mtrl-sci↗

arXiv2004

Electric field induced charge injection or exhaustion in organic thin film transistor

The conductivity of organic semiconductors is measured {\it in-situ} and continuously with a bottom contact configuration, as a function of film thickness at various gate voltages. The depletion layer thickness can be directly determined as a shift of the threshold thickness at which electric current began to flow. The {\it in-situ} and continuous measurement can also determine qualitatively the accumulation layer thickness together with the distribution function of injected carriers. The accumulation layer thickness is a few mono layers, and it does not depend on gate voltages, rather depends on the chemical species.

cond-mat.mtrl-sci↗

arXiv2004

Metal-induced gap states in epitaxial organic-insulator/metal interfaces

We have shown, both experimentally and theoretically, that the metal-induced gap states (MIGS) can exist in epitaxially grown organic insulator/metal interfaces. The experiment is done for alkane/Cu(001) with an element-selective near edge x-ray absorption fine structure (NEXAFS), which exhibits a pre-peak indicative of MIGS. An {\it ab initio} electronic structure calculation supports the existence of the MIGS. When the Cu substrate is replaced with Ni, an interface magnetism (spin-polarized organic crystal at the interface) is predicted to be possible with a carrier doping.

cond-mat.mtrl-sci↗

arXiv2004

One-dimensional ordered structure of a-sexithienyl on Cu(110)

We have studied atomic structures of a-sexithienyl (6T) films grown on Cu(110) by near-edge x-ray absorption fine structure (NEXAFS). A one-dimensional (1D) ordered structure of 6T with its molecular long axis parallel to the Cu[001] direction could be fabricated by deposition at 300 K and subsequent annealing at 360 K. Polarization and azimuth-dependent NEXAFS revealed the formation process of the 1D structure and showed the molecular orientation in the in-plane direction directly. We propose here a method to obtain the orientation distribution function of molecules using NEXAFS.

cond-mat.mtrl-sci↗

arXiv2004

Polar surface engineering in ultra-thin MgO(111)/Ag(111) -- possibility of metal-insulator transition and magnetism

A recent report [Kiguchi {\it et al.}, Phys. Rev. B {\bf 68}, 115402 (2003)] that the (111) surface of 5 MgO layers grown epitaxially on Ag(111) becomes metallic to reduce the electric dipole moment raises a question of what will happen when we have fewer MgO layers. Here we have revealed, first experimentally with electron energy-loss spectroscopy, that MgO(111) remains metallic even when one-layer thick, and theoretically with the density functional theory that the metallization should depend on the nature of the substrate. We further show, with a spin-density functional calculation, that a ferromagnetic instability may be expected for thicker films.

cond-mat.mtrl-sci↗