SearcharxivSearch

arXiv subjects

Manuel Quijada

Publications and source records attributed to Manuel Quijada.

9 recordsLinked to original sources

Connecting Polarization to Exoplanet Yield Calculations for HWO

The Habitable Worlds Observatory (HWO) aims to enable the detection and characterization of Earth-like planets around Sun-like stars to search for possible signs of life elsewhere in our universe. This requires an incredibly sensitive coronagraph instrument that suppresses the light from the star by a factor of 10 billion, which must contend with error terms that have not previously limited high-contrast instrumentation at lower levels of starlight suppression. Polarization aberrations are one such source of error that is particularly problematic for coronagraphy on a large space telescope. Optical rays in large, compact astronomical observatories can have large changes in angle of incidence over the beam, which induce polarization aberrations that decrease sensitivities to faint signals at small angular separations. Limiting variation in angles of incidence along the optical path could lead to longer, less stable observatories. This could negatively impact the total number of exo-Earths HWO would be able to detect. This study links open-source physical optics modeling tools to an exoplanet yield optimizer to understand how polarization aberrations influence science return for HWO. We also explore how polarization aberrations scale with change in angle of incidence, which could drive the primary-secondary mirror distance and overall observatory stability. In the visible, we find that decreasing the EAC-1 barrel from 16m to 12m results in $\approx 10^{-10}$ contrast at the IWA where we expect exo-Earths to be. In the UV we appear to be less sensitive to polarization because exo-Earths are farther from the IWA. We also find a limited range over which the design reference mission of EAC-1 can be optimized to compensate for polarization aberrations using altruistic yield optimization. We then report on mitigation strategies to minimize the presence of polarization aberrations in HWO.

astro-ph.IM

Statements of Current States of the Art for Key non-Coronagraphic Technologies for HWO

In preparation for development of both key technologies and instrument concept studies to use those technologies, the Habitable Worlds Observatory Technology Maturation Project Office at the NASA Goddard Space Flight Center has compiled a series of statements of state of the art for those same key technologies. These statements are being provided to the public as exemplars and suggestions for possible future collaboration for those same instrument concept studies, but without mandate, to enable proposing teams to be able to find the technical solutions they need to field a compelling proposal. This information resides in the public domain and is presented without prejudice.

astro-ph.IM

Metal-Mesh Linear Variable Filter for Far-Infrared Wavelengths

Future far-infrared (IR) observatories require compact and cost efficient optical linear variable bandpass filters (LVBFs) to define their instrument spectral bands. We have designed novel far-IR LVBFs that consist of metal-mesh bandpass filters comprised of a gold film with cross-slots of varying sizes along a silicon (Si) substrate with anti-reflection (AR) coatings. We present our work on the simulated and measured transmission of non-AR coated and AR coated LVBFs for bandpass peaks from wavelengths of 24 to 36 $\mu$m with a resolving power ($R=\lambda_0/\Delta\lambda$) of R$\approx$6 for non-AR coated LVBFs and R$\approx$4 for AR coated LVBFs. We also present a method to decrease the effects of out-of-band high frequency transmission exhibited by metal-mesh filters by depositing a thin layer of hydrogenated amorphous silicon (a-Si:H) on the metal-mesh of the LVBF. We have fabricated and measured the LVBFs at room temperature and cryogenic temperatures (5 K). We measure a high peak transmission of $\sim$80-90 \% for the AR coated LVBF at 5 K and demonstrate that the a-Si:H LVBF is a promising method to address out-of-band high frequency transmission.

astro-ph.IM

Ultraviolet Technology To Prepare For The Habitable Worlds Observatory

We present here the current state of a collection of promising ultraviolet technologies in preparation for the Habitable Worlds Observatory. Working with experts representing a significant number of groups working in the ultraviolet, we summarize some of the leading science drivers, present an argument for a 100 nm blue wavelength cutoff, and gather current state of the art of UV technologies. We present the state of the art of contamination control, a crucial piece of the UV instrument plan. We explore next steps with individual technologies, as well as present paths forward with systems level testing and development.

astro-ph.IM

Fabrication and characterization of optical filters from polymeric aerogels loaded with diamond scattering particles

We have developed a suite of infrared-blocking filters made by embedding diamond scattering particles in a polyimide aerogel substrate. We demonstrate the ability to tune the spectral performance of the filters based on both the composition of the base aerogel material and the properties of the scattering particles. We summarize the fabrication, optical modeling, and characterization of these filters. We investigate two polyimide base aerogel formulations and the effects of loading them with diamond scattering particles of varying sizes and relative densities. We describe a model for the filters' behavior using a combination of Maxwell Garnett and Mie Scattering techniques. We present optical characterization results for diamond-loaded aerogel filters with cutoff frequencies (50% transmittance) ranging between 2.5 and 15 THz, and confirm that the measured spectral performance is in agreement with our optical models. We also measure the filters' refractive index in the microwave and report findings in agreement with Maxwell Garnett model predictions (typically n < 1.08).

astro-ph.IM

Cross-Slot Metal-Mesh Bandpass Filters for Far-Infrared Astronomy

The far-infrared (IR) region is rich with information needed to characterize interstellar dust and to investigate the cold outer planets of the solar system and their icy moons. The proposed sub-orbital observatory the Balloon Experiment for Galactic INfrared Science (BEGINS) will utilize cryogenic instruments to map spectral energy distributions (SEDs) of interstellar dust in the Cygnus molecular cloud complex. A future high priority flagship mission Uranus Orbiter and Probe carrying a net flux radiometer (NFR) will study the in situ heat flux of the icy giants atmosphere to 10 bar pressure. These instruments require far-IR filters to define the instrument spectral bandwidths. Our ultimate goal is to define the instrument bands of BEGINS and the NFR with linear-variable filters (LVFs) and discrete-variable filters (DVFs). The LVFs and DVFs will be made of metal mesh band-pass filters (MMBF) comprised of a 100 nm thick gold film with cross-shaped slots of varying sizes along a silicon (Si) substrate with cyclic olefin copolymer (COC) anti-reflection (AR) coatings. We present our progress towards LVFs and DVFs with simulated and measured transmission of a room temperature, non-AR coated, single-band 44 $\mu$m MMBF filter. We have successfully fabricated, measured, and modeled a non-AR coated, room temperature 44 $\mu$m MMBF. The transmission at room temperature and non-AR coated was measured to be 27\% with a resolving power of 11. When COC-AR coated on both sides the transmission is expected to increase to 69\% with a resolving power of 10.

astro-ph.IM

Dielectric Properties of Conductively Loaded Polyimides in the Far Infrared

The dielectric properties of selected conductively-loaded polyimide samples are characterized in microwave through far infrared wavebands. These materials, belonging to the Vespel\textsuperscript{\textregistered} family, are more readily formed by direct machining than their ceramic loaded epoxy counterparts and present an interesting solution for realizing absorptive optical control structures. Measurements spanning a spectral range from 1 to 600\,${\rm cm^{-1}}$ (0.03 to 18\,THz) were preformed and used in parametrization of the media's dielectric function at frequencies below $\approx3\,$THz.

cond-mat.mtrl-sci

Advanced Environmentally Resistant Lithium Fluoride Mirror Coatings for the Next-Generation of Broadband Space Observatories

Recent advances in the physical vapor deposition (PVD) of protective fluoride films have raised the far-ultraviolet (FUV: 912-1600 Å) reflectivity of aluminum-based mirrors closer to the theoretical limit. The greatest gains, at more than 20%, have come for lithium fluoride-protected aluminum, which has the shortest wavelength cutoff of any conventional overcoat. Despite the success of the NASA FUSE mission, the use of lithium fluoride (LiF)-based optics is rare, as LiF is hygroscopic and requires handling procedures that can drive risk. With NASA now studying two large mission concepts for astronomy, Large UV-Optical-IR Surveyor (LUVOIR) and the Habitable Exoplanet Imaging Mission (HabEx), which mandate throughput down to 1000 Å, the development of LiF-based coatings becomes crucial. This paper discusses steps that are being taken to qualify these new enhanced LiF-protected aluminum (eLiF) mirror coatings for flight. In addition to quantifying the hygroscopic degradation, we have developed a new method of protecting eLiF with an ultrathin (10-20 Å) capping layer of a non-hygroscopic material to increase durability. We report on the performance of eLiF-based optics and assess the steps that need to be taken to qualify such coatings for LUVOIR, HabEx, and other FUV-sensitive space missions.

astro-ph.IM

Photometry using the Infrared Array Camera on the Spitzer Space Telescope

We present several corrections for point source photometry to be applied to data from the Infrared Array Camera (IRAC) on the Spitzer Space Telescope. These corrections are necessary because of characteristics of the IRAC arrays and optics and the way the instrument is calibrated in-flight. When these corrections are applied, it is possible to achieve a ~2% relative photometric accuracy for sources of adequate signal to noise in an IRAC image.

astro-ph