arXiv subjects

Marc Betoule

Publications and source records attributed to Marc Betoule.

14 recordsLinked to original sources

arXiv2025

StarDICE IV: correcting visible photometry from atmospheric gray extinction using thermal infrared observations

Ground-based surveys such as the Vera C. Rubin Observatory's Legacy Survey of Space and Time require photometric calibration that is both long-term stable and spatially uniform at the sub-per cent level, even during non-photometric conditions. Achieving this precision motivates new approaches to characterize atmospheric transmission, particularly to mitigate grey extinction from clouds. The StarDICE experiment aims to establish a metrology chain linking laboratory standards to astrophysical fluxes with 1 mmag accuracy in the $\textit{griz}$ bands, a goal for which controlling variable atmospheric effects is essential. We present a method that corrects photometric measurements using simultaneous radiometric information from an infrared thermal camera. The grey-extinction model is fit on an image-by-image basis using thermal radiance excess and the difference between synthetic and instrumental fluxes of calibration stars, without requiring assumptions about the spatial structure of extinction. The method relies on a forward model that incorporates environmental monitoring, radiative-transfer simulations, and Gaia DR3 stellar catalogues. Using data from a remote observing system that repeatedly monitored two fields under diverse atmospheric conditions, we show that the corrections reduce residuals between corrected and reference magnitudes and produce extinction maps with 2-arcmin resolution and ~0.01 mag accuracy. Using this technique, we can recover data acquired under non-photometric conditions with a precision comparable to data obtained under photometric conditions. For the most affected exposures, the mean absolute error improves from 0.64 to 0.11 mag, and temporal extinction variations can be reduced to 0.025 mag per source. We discuss the implications of this technique for future surveys and outline directions for further refinement.

astro-ph.IM↗

arXiv2025

Development of an Ultra-fast, Likelihood-based, Distance Inference Framework for the Next Generation of Type Ia Supernova Surveys

In this work, we present EDRIS (French for Distance Estimator for Incomplete Supernova Surveys), a cosmological inference framework tailored to reconstruct unbiased cosmological distances from type Ia supernovae light-curve parameters. This goal is achieved by including data truncation directly in the statistical model which takes care of the standardization of luminosity distances. It allows us to build a single-step distance estimate by maximizing the corresponding likelihood, free from the biases the survey detection limits would introduce otherwise. Moreover, we expect the current worldwide statistics to be multiplied by O(10) in the upcoming years. This provides a new challenge to handle as the cosmological analysis must stay computationally towable. We show that the optimization methods used in EDRIS allow for a reasonable time complexity of O($N^2$) resulting in a very fast inference process (O(10s) for 1500 supernovae).

astro-ph.CO↗

arXiv2024

StarDICE III: Characterization of the photometric instrument with a Collimated Beam Projector

The measurement of type Ia supernovae magnitudes provides cosmological distances, which can be used to constrain dark energy parameters. Large photometric surveys require a substantial improvement in the calibration precision of their photometry to reduce systematic uncertainties in cosmological constraints. The StarDICE experiment is designed to establish accurate broadband flux references for these surveys, aiming for sub-percent precision in magnitude measurements. This requires a precise measurement of the filter bandpasses of both the StarDICE and survey instruments with sub-nanometer accuracy. To that end, we have developed the Collimated Beam Projector (CBP), an optical device capable of calibrating the throughput of an astronomical telescope and of its filters. The CBP is built from a tunable laser source and a reversed telescope to emit a parallel monochromatic light beam that is continuously monitored in flux and wavelength. The CBP output light flux is measured using a large area photodiode, previously calibrated relative to a NIST photodiode. We derive the StarDICE telescope throughput and filter transmissions from the CBP measurements, anchoring it to the absolute calibration provided by the NIST. After analyzing the systematic uncertainties, we achieved sub-nanometer accuracy in determining filter central wavelengths, measured each filter transmission with a precision of 0.5% per 1nm bin, and detected out-of-band leakages at 0.01%. Furthermore, we have synthesized the equivalent transmission for full pupil illumination from four sample positions in the StarDICE telescope mirror, with an accuracy of approximately 0.2nm for central wavelengths and 7mmag for broadband fluxes. We demonstrated our ability to characterize a telescope throughput down to the mmag, and paved the way for future developments, such as a portable CBP version for in-situ transmission monitoring.

astro-ph.IM↗

arXiv2024

ZTF SN Ia DR2: Overview

We present the first homogeneous release of several thousand Type Ia supernovae (SNe Ia), all having spectroscopic classification, and spectroscopic redshifts for half the sample. This release, named the "DR2", contains 3628 nearby (z < 0.3) SNe Ia discovered, followed and classified by the Zwicky Transient Facility survey between March 2018 and December 2020. Of these, 3000 have good-to-excellent sampling and 2667 pass standard cosmology light-curve quality cuts. This release is thus the largest SN Ia release to date, increasing by an order of magnitude the number of well characterized low-redshift objects. With the "DR2", we also provide a volume-limited (z < 0.06) sample of nearly a thousand SNe Ia. With such a large, homogeneous and well controlled dataset, we are studying key current questions on SN cosmology, such as the linearity SNe Ia standardization, the SN and host dependencies, the diversity of the SN Ia population, and the accuracy of the current light-curve modeling. These, and more, are studied in detail in a series of articles associated with this release. Alongside the SN Ia parameters, we publish our force-photometry gri-band light curves, 5138 spectra, local and global host properties, observing logs, and a python tool to ease use and access of these data. The photometric accuracy of the "DR2" is not yet suited for cosmological parameter inference, which will follow as "DR2.5" release. We nonetheless demonstrate that the multi-thousand SN Ia Hubble Diagram has a typical 0.15 mag scatter.

astro-ph.CO↗

arXiv2023

Union Through UNITY: Cosmology with 2,000 SNe Using a Unified Bayesian Framework

Type Ia supernovae (SNe Ia) were instrumental in establishing the acceleration of the universe's expansion. By virtue of their combination of distance reach, precision, and prevalence, they continue to provide key cosmological constraints, complementing other cosmological probes. Individual SN surveys cover only over about a factor of two in redshift, so compilations of multiple SN datasets are strongly beneficial. We assemble an up-to-date "Union" compilation of 2087 cosmologically useful SNe Ia from 24 datasets ("Union3"). We take care to put all SNe on the same distance scale and update the light-curve fitting with SALT3 to use the full rest-frame optical. Over the next few years, the number of cosmologically useful SNe Ia will increase by more than a factor of ten, and keeping systematic uncertainties subdominant will be more challenging than ever. We discuss the importance of treating outliers, selection effects, light-curve shape and color populations and standardization relations, unexplained dispersion, and heterogeneous observations simultaneously. We present an updated Bayesian framework, called UNITY1.5 (Unified Nonlinear Inference for Type-Ia cosmologY), that incorporates significant improvements in our ability to model selection effects, standardization, and systematic uncertainties compared to earlier analyses. As an analysis byproduct, we also recover the posterior of the SN-only peculiar-velocity field, although we do not interpret it in this work. We compute updated cosmological constraints with Union3 and UNITY1.5, finding weak 1.7--2.6 sigma tension with LambdaCDM and possible evidence for thawing dark energy (w0 > -1, wa < 0). We release our SN distances, light-curve fits, and UNITY1.5 framework to the community.

astro-ph.CO↗

arXiv2023

Measurement of telescope transmission using a Collimated Beam Projector

With the increasingly large number of type Ia supernova being detected by current-generation survey telescopes, and even more expected with the upcoming Rubin Observatory Legacy Survey of Space and Time, the precision of cosmological measurements will become limited by systematic uncertainties in flux calibration rather than statistical noise. One major source of systematic error in determining SNe Ia color evolution (needed for distance estimation) is uncertainty in telescope transmission, both within and between surveys. We introduce here the Collimated Beam Projector (CBP), which is meant to measure a telescope transmission with collimated light. The collimated beam more closely mimics a stellar wavefront as compared to flat-field based instruments, allowing for more precise handling of systematic errors such as those from ghosting and filter angle-of-incidence dependence. As a proof of concept, we present CBP measurements of the StarDICE prototype telescope, achieving a standard (1 sigma) uncertainty of 3 % on average over the full wavelength range measured with a single beam illumination.

astro-ph.IM↗

arXiv2022

StarDICE I: sensor calibration bench and absolute photometric calibration of a Sony IMX411 sensor

The Hubble diagram of type-Ia supernovae (SNe-Ia) provides cosmological constraints on the nature of dark energy with an accuracy limited by the flux calibration of currently available spectrophotometric standards. The StarDICE experiment aims at establishing a 5-stage metrology chain from NIST photodiodes to stars, with a targeted accuracy of \SI{1}{mmag} in $griz$ colors. We present the first two stages, resulting in the calibration transfer from NIST photodiodes to a demonstration \SI{150}{Mpixel} CMOS sensor (Sony IMX411ALR as implemented in the QHY411M camera by QHYCCD). As a side-product, we provide full characterization of this camera. A fully automated spectrophotometric bench is built to perform the calibration transfer. The sensor readout electronics is studied using thousands of flat-field images from which we derive stability, high resolution photon transfer curves and estimates of the individual pixel gain. The sensor quantum efficiency is then measured relative to a NIST-calibrated photodiode. Flat-field scans at 16 different wavelengths are used to build maps of the sensor response. We demonstrate statistical uncertainty on quantum efficiency below \SI{0.001}{e^-/γ} between \SI{387}{nm} and \SI{950}{nm}. Systematic uncertainties in the bench optics are controlled at the level of \SI{1e-3}{e^-/γ}. Uncertainty in the overall normalization of the QE curve is 1\%. Regarding the camera we demonstrate stability in steady state conditions at the level of \SI{32.5}{ppm}. Homogeneity in the response is below \SI{1}{\percent} RMS across the entire sensor area. Quantum efficiency stays above \SI{50}{\percent} in most of the visible range, peaking well above \SI{80}{\percent} between \SI{440}{nm} and \SI{570}{nm}. Differential non-linearities at the level of \SI{1}{\percent} are detected. A simple 2-parameter model is proposed to mitigate the effect.

astro-ph.IM↗

arXiv2022

An Estimator for Lensing Potential from Galaxy Number Counts

We derive an estimator for the lensing potential from galaxy number counts which contains a linear and a quadratic term. We show that this estimator has a much larger signal-to-noise ratio than the corresponding estimator from intensity mapping. This is due to the additional lensing term in the number count angular power spectrum which is present already at linear order. We estimate the signal-to-noise ratio for future photometric surveys. Particularly at high redshifts, $z\gtrsim 1.5$, the signal to noise ratio can become of order 30. Therefore, the number counts in photometric surveys would be an excellent means to measure tomographic lensing spectra.

astro-ph.CO↗

arXiv2018

Dependence of Type Ia supernova luminosities on their local environment

We present a fully consistent catalog of local and global properties of host galaxies of 882 Type Ia supernovæ (SNIa) that were selected based on their light-curve properties, spanning the redshift range $0.01 < z < 1.\text{}$ This catalog corresponds to a preliminary version of the compilation sample and includes Supernova Legacy Survey (SNLS) 5-year data, Sloan Digital Sky Survey (SDSS), and low-redshift surveys. We measured low- and moderate-redshift host galaxy photometry in SNLS and SDSS images and used spectral energy distribution (SED) fitting techniques to derive host properties such as stellar mass and $U-V$ rest-frame colors; the latter are an indicator of the luminosity-weighted age of the stellar population in a galaxy. We also estimated the local observed fluxes at the supernova location within a proper distance radius of 3 kpc, and transposed them into local $U-V$ rest-frame colors. Selecting SNIa based on host photometry quality, we then performed cosmological fits using local color as a third standardization variable, for which we split the sample at the median value. We find a local color step as significant as the maximum mass step effect. Correcting for the maximum mass step correction, we still find a significant local color effect, which shows that additional information is provided by the close environment of SNIa. Departures from the initial choices were investigated, and we discuss the possible implications for cosmology. This will be of tremendous importance for the forthcoming SNIa surveys, and in particular for the Large Synoptic Survey Telescope (LSST), for which uncertainties on the dark energy equation of state will be comparable to the effects reported here.

astro-ph.GA↗

arXiv2017

The SkyMapper Transient Survey

The SkyMapper 1.3 m telescope at Siding Spring Observatory has now begun regular operations. Alongside the Southern Sky Survey, a comprehensive digital survey of the entire southern sky, SkyMapper will carry out a search for supernovae and other transients. The search strategy, covering a total footprint area of ~2000 deg2 with a cadence of $\leq 5$ days, is optimised for discovery and follow-up of low-redshift type Ia supernovae to constrain cosmic expansion and peculiar velocities. We describe the search operations and infrastructure, including a parallelised software pipeline to discover variable objects in difference imaging; simulations of the performance of the survey over its lifetime; public access to discovered transients; and some first results from the Science Verification data.

astro-ph.IM↗

arXiv2012

Testing Models of Intrinsic Brightness Variations in Type Ia Supernovae, and their Impact on Measuring Cosmological Parameters

For spectroscopically confirmed Type Ia supernovae we evaluate models of intrinsic brightness variations with detailed data/Monte Carlo comparisons of the dispersion in the following quantities: Hubble-diagram scatter, color difference (B-V-c) between the true B-V color and the fitted color (c) from the SALT-II light curve model, and photometric redshift residual. The data sample includes 251 ugriz light curves from the 3-season Sloan Digital Sky Survey-II, and 191 griz light curves from the Supernova Legacy Survey 3-year data release. We find that the simplest model of a wavelength-independent (coherent) scatter is not adequate, and that to describe the data the intrinsic scatter model must have wavelength-dependent variations. We use Monte Carlo simulations to examine the standard approach of adding a coherent scatter term in quadrature to the distance-modulus uncertainty in order to bring the reduced chi2 to unity when fitting a Hubble diagram. If the light curve fits include model uncertainties with the correct wavelength dependence of the scatter, we find that the bias on the dark energy equation of state parameter $w$ is negligible. However, incorrect model uncertainties can lead to a significant bias on the distance moduli, with up to ~0.05 mag redshift-dependent variation. For the recent SNLS3 cosmology results we estimate that this effect introduces an additional systematic uncertainty on $w$ of ~0.02, well below the total uncertainty. However, this uncertainty depends on the samples used, and thus this small $w$-uncertainty is not guaranteed in future cosmology results.

astro-ph.CO↗

arXiv2009

Study of the Experimental Probe of Inflationary Cosmology (EPIC)-Intemediate Mission for NASA's Einstein Inflation Probe

Measurements of Cosmic Microwave Background (CMB) anisotropy have served as the best experimental probe of the early universe to date. The inflationary paradigm, inspired in part by the extreme isotropy of the CMB, is now a cornerstone in modern cosmology. Inflation has passed a series of rigorous experimental tests, but we still do not understand the physical mechanism or energy scale behind inflation. A general prediction of inflation and one that can provide certain insights into inflationary physics is a background of primordial gravitational waves. These perturbations leave a distinct signature in the CMB B-modes of polarization. The EPIC (Experimental Probe of Inflationary Cosmology) study team has investigated several CMB polarization mission concepts to carry out a definitive measurement of the inflationary B-mode polarization spectrum. In this report we study a mission with an aperture intermediate between the two missions discussed in our previous report. EPIC-IM's increased aperture allows access to a broader science case than the small EPIC-Low Cost mission. In addition to the search for inflationary gravitational waves, the increase aperture allows us to mine the scale polarization and lensing shear polarization signals down to cosmological limits, so that we extract virtually all the cosmological information available from the CMB. In addition, a modest number of channels operating at higher frequencies allows for an all-sky measurement of polarized Galactic dust, which will provide a rich dataset for Galactic science related to magnetic fields. Using a combination of a large sensitivity focal plane with a new optical design, and an efficient 4K mechanical cooler, EPIC-IM realizes higher sensitivity than EPIC-Comprehensive Science mission.

astro-ph.CO↗

arXiv2009

Measuring the tensor to scalar ratio from CMB B-modes in presence of foregrounds

Abreg: We investigate the impact of polarized foreground emission on the performances of future CMB experiments in measuring the tensor-to-scalar ratio r. We design a component separation pipeline, based on the Smica method, aimed at estimating r and the foreground contamination from the data with no prior assumption on the frequency dependence or spatial distribution of the foregrounds. We derive error bars accounting for the uncertainty on foreground contribution. We use the current knowledge of galactic and extra-galactic foregrounds as implemented in the Planck Sky Model (PSM), to build simulations of the sky emission for various experimental setups. Our method, permits us to detect r = 0.1 at more than 3 sigma from B-modes only with Planck data, and r = 0.001 at 6 sigma for the most ambitious designs of the future EPIC probe. We find that all-sky experiments permit a proper measurement of the reionization bump despite the large scale foreground emission and are nearly insensitive to contamination from point sources and lensing if their statistical contribution can be modelled accurately. Investigating the observation of a small but clean part of the sky, we show that diffuse foregrounds remain a concern for a sensitive ground-based experiment with a limited frequency coverage when measuring r < 0.1, but are dealt with efficiently by a deep field space mission which is in return quite sensitive to lensing. Our results do not significantly depend on the overall level and frequency dependence of the diffused foreground model.

astro-ph.CO↗

arXiv2008

Component separation with flexible models. Application to the separation of astrophysical emissions

This paper offers a new point of view on component separation, based on a model of additive components which enjoys a much greater flexibility than more traditional linear component models. This flexibility is needed to process the complex full-sky observations of the CMB expected from the Planck space mission, for which it was developed, but it may also be useful in any context where accurate component separation is needed.

astro-ph↗