Searcharxiv⌕ Search

arXiv subjects

Marco Di Renzo

Publications and source records attributed to Marco Di Renzo.

At least 217 records · Page 12Linked to original sources

Compressive Sensing Based Joint Activity and Data Detection for Grant-Free Massive IoT Access

Massive machine-type communications (mMTC) are poised to provide ubiquitous connectivity for billions of Internet-of-Things (IoT) devices. However, the required low-latency massive access necessitates a paradigm shift in the design of random access schemes, which invokes a need of efficient joint activity and data detection (JADD) algorithms. By exploiting the feature of sporadic traffic in massive access, a beacon-aided slotted grant-free massive access solution is proposed. Specifically, we spread the uplink access signals in multiple subcarriers with pre-equalization processing and formulate the JADD as a multiple measurement vector (MMV) compressive sensing problem. Moreover, to leverage the structured sparsity of uplink massive access signals among multiple time slots, we develop two computationally efficient detection algorithms, which are termed as orthogonal approximate message passing (OAMP)-MMV algorithm with simplified structure learning (SSL) and accurate structure learning (ASL). To achieve accurate detection, the expectation maximization algorithm is exploited for learning the sparsity ratio and the noise variance. To further improve the detection performance, channel coding is applied and successive interference cancellation (SIC)-based OAMP-MMV-SSL and OAMP-MMV-ASL algorithms are developed, where the likelihood ratio obtained in the soft-decision can be exploited for refining the activity identification. Finally, the state evolution of the proposed OAMP-MMV-SSL and OAMP-MMV-ASL algorithms is derived to predict the performance theoretically. Simulation results verify that the proposed solutions outperform various state-of-the-art baseline schemes, enabling low-latency random access and high-reliable massive IoT connectivity with overloading.

cs.IT↗

A Path to Smart Radio Environments: An Industrial Viewpoint on Reconfigurable Intelligent Surfaces

With both the standardization and commercialization completed in an unforeseen pace for the 5th generation (5G) wireless network, researchers, engineers and executives from the academia and the industry have turned their sights on candidate technologies to support the next generation wireless networks. Reconfigurable intelligent surfaces (RIS), sometimes referred to as intelligent reflecting surfaces (IRS), have been identified to be potential components of the future wireless networks because they can reconfigure the propagation environment for wireless signals with low-cost passive devices. In doing so, the coverage of a cell can be expected to increase significantly as well as the overall throughput of the network. RIS has not only become an attractive research area but also triggered a couple of projects to develop appropriate solutions to enable the set-up of hardware demonstrations and prototypes. In parallel, technical discussions and activities towards standardization already took off in some regions. Promoting RIS to be integrated into future commercial networks and become a commercial success requires significant standardization work taken place both at regional level standards developing organizations (SDO) and international SDOs such as the 3rd Generation Partnership Project (3GPP). While many research papers study how RIS can be used and optimized, few effort is devoted to analyzing the challenges to commercialize RIS and how RIS can be standardized. This paper intends to shed some light on RIS from an industrial viewpoint and provide a clear roadmap to make RIS industrially feasible.

cs.NI↗

Learning-based Prediction, Rendering and Transmission for Interactive Virtual Reality in RIS-Assisted Terahertz Networks

The quality of experience (QoE) requirements of wireless Virtual Reality (VR) can only be satisfied with high data rate, high reliability, and low VR interaction latency. This high data rate over short transmission distances may be achieved via abundant bandwidth in the terahertz (THz) band. However, THz waves suffer from severe signal attenuation, which may be compensated by the reconfigurable intelligent surface (RIS) technology with programmable reflecting elements. Meanwhile, the low VR interaction latency may be achieved with the mobile edge computing (MEC) network architecture due to its high computation capability. Motivated by these considerations, in this paper, we propose a MEC-enabled and RIS-assisted THz VR network in an indoor scenario, by taking into account the uplink viewpoint prediction and position transmission, MEC rendering, and downlink transmission. We propose two methods, which are referred to as centralized online Gated Recurrent Unit (GRU) and distributed Federated Averaging (FedAvg), to predict the viewpoints of VR users. In the uplink, an algorithm that integrates online Long-short Term Memory (LSTM) and Convolutional Neural Networks (CNN) is deployed to predict the locations and the line-of-sight and non-line-of-sight statuses of the VR users over time. In the downlink, we further develop a constrained deep reinforcement learning algorithm to select the optimal phase shifts of the RIS under latency constraints. Simulation results show that our proposed learning architecture achieves near-optimal QoE as that of the genie-aided benchmark algorithm, and about two times improvement in QoE compared to the random phase shift selection scheme.

eess.SP↗

Trajectory Design for UAV-Based Internet-of-Things Data Collection: A Deep Reinforcement Learning Approach

In this paper, we investigate an unmanned aerial vehicle (UAV)-assisted Internet-of-Things (IoT) system in a sophisticated three-dimensional (3D) environment, where the UAV's trajectory is optimized to efficiently collect data from multiple IoT ground nodes. Unlike existing approaches focusing only on a simplified two-dimensional scenario and the availability of perfect channel state information (CSI), this paper considers a practical 3D urban environment with imperfect CSI, where the UAV's trajectory is designed to minimize data collection completion time subject to practical throughput and flight movement constraints. Specifically, inspired from the state-of-the-art deep reinforcement learning approaches, we leverage the twin-delayed deep deterministic policy gradient (TD3) to design the UAV's trajectory and present a TD3-based trajectory design for completion time minimization (TD3-TDCTM) algorithm. In particular, we set an additional information, i.e., the merged pheromone, to represent the state information of UAV and environment as a reference of reward which facilitates the algorithm design. By taking the service statuses of IoT nodes, the UAV's position, and the merged pheromone as input, the proposed algorithm can continuously and adaptively learn how to adjust the UAV's movement strategy. By interacting with the external environment in the corresponding Markov decision process, the proposed algorithm can achieve a near-optimal navigation strategy. Our simulation results show the superiority of the proposed TD3-TDCTM algorithm over three conventional non-learning based baseline methods.

cs.IT↗

Massive Access in Media Modulation Based Massive Machine-Type Communications

The massive machine-type communications (mMTC) paradigm based on media modulation in conjunction with massive MIMO base stations (BSs) is emerging as a viable solution to support the massive connectivity for the future Internet-of-Things, in which the inherent massive access at the BSs poses significant challenges for device activity and data detection (DADD). This paper considers the DADD problem for both uncoded and coded media modulation based mMTC with a slotted access frame structure, where the device activity remains unchanged within one frame. Specifically, due to the slotted access frame structure and the adopted media modulated symbols, the access signals exhibit a doubly structured sparsity in both the time domain and the modulation domain. Inspired by this, a doubly structured approximate message passing (DS-AMP) algorithm is proposed for reliable DADD in the uncoded case. Also, we derive the state evolution of the DS-AMP algorithm to theoretically characterize its performance. As for the coded case, we develop a bit-interleaved coded media modulation scheme and propose an iterative DS-AMP (IDS-AMP) algorithm based on successive inference cancellation (SIC), where the signal components associated with the detected active devices are successively subtracted to improve the data decoding performance. In addition, the channel estimation problem for media modulation based mMTC is discussed and an efficient data-aided channel state information (CSI) update strategy is developed to reduce the training overhead in block fading channels. Finally, simulation results and computational complexity analysis verify the superiority of the proposed algorithms in both uncoded and coded cases. Also, our results verify the validity of the proposed data-aided CSI update strategy.

cs.IT↗

Intelligent Omni-Surface: Ubiquitous Wireless Transmission by Reflective-Transmissive Metasurface

Intelligent reflecting surface (IRS), which is capable to adjust propagation conditions by controlling phase shifts of the reflected waves that impinge on the surface, has been widely analyzed for enhancing the performance of wireless systems. However, the reflective properties of widely studied IRSs restrict the service coverage to only one side of the surface. In this paper, to extend the wireless coverage of communication systems, we introduce the concept of intelligent omni-surface (IOS)-assisted communication. More precisely, IOS is an important instance of reconfigurable intelligent surface (RIS) that is capable to provide service coverage to the mobile users (MUs) in a reflective and a transmissive manner. We consider a downlink IOS-assisted communication system, where a multi-antenna small base station (SBS) and an IOS perform beamforming jointly, to improve the received power of multiple MUs on both sides of the IOS, through different reflective/transmissive channels. To maximize the sum-rate, we formulate a joint IOS phase shift design and SBS beamforming optimization problem, and propose an iterative algorithm to solve the resulting non-convex program efficiently. Both theoretical analysis and simulation results show that an IOS significantly extends the service coverage of the SBS when compared to an IRS.

eess.SY↗

A Prototype of Reconfigurable Intelligent Surface with Continuous Control of the Reflection Phase

With the development of the next generation of mobile networks, new research challenges have emerged, and new technologies have been proposed to face them. On the one hand, the reconfigurable intelligent surface (RIS) technology is being investigated for partially controlling the wireless channels. The RIS is a promising technology for improving the signal quality by controlling the scattering of the electromagnetic waves in a nearly passive manner. On the other hand, ambient backscatter communications (AmBC) is another promising technology that is tailored for addressing the energy efficiency requirements for the Internet of Things (IoT). This technique enables low-power communications by backscattering ambient signals and, thus, reusing existing electromagnetic waves for communications. RIS technology can be utilized in the context of AmBC for improving the system performance. In this paper, we report a prototype of an RIS that offers the capability of controlling the phase shift of the reflected waves in a continuous manner, and we characterize its characteristics by using full-wave simulations and through experimental measurements. Specifically, we introduce a phase shift model for predicting the signal reflected by the RIS prototype. We apply the proposed model for optimizing an RISassisted AmBC system and we demonstrate that the use of an RIS can significantly improve the system performance.

eess.SP↗

What Will the Future of UAV Cellular Communications Be? A Flight from 5G to 6G

What will the future of UAV cellular communications be? In this tutorial article, we address such a compelling yet difficult question by embarking on a journey from 5G to 6G and sharing a large number of realistic case studies supported by original results. We start by overviewing the status quo on UAV communications from an industrial standpoint, providing fresh updates from the 3GPP and detailing new 5G NR features in support of aerial devices. We then show the potential and the limitations of such features. In particular, we demonstrate how sub-6 GHz massive MIMO can successfully tackle cell selection and interference challenges, we showcase encouraging mmWave coverage evaluations in both urban and suburban/rural settings, and we examine the peculiarities of direct device-to-device communications in the sky. Moving on, we sneak a peek at next-generation UAV communications, listing some of the use cases envisioned for the 2030s. We identify the most promising 6G enablers for UAV communication, those expected to take the performance and reliability to the next level. For each of these disruptive new paradigms (non-terrestrial networks, cell-free architectures, artificial intelligence, reconfigurable intelligent surfaces, and THz communications), we gauge the prospective benefits for UAVs and discuss the main technological hurdles that stand in the way. All along, we distil our numerous findings into essential takeaways, and we identify key open problems worthy of further study.

cs.IT↗

Model-Driven Deep Learning Based Channel Estimation and Feedback for Millimeter-Wave Massive Hybrid MIMO Systems

This paper proposes a model-driven deep learning (MDDL)-based channel estimation and feedback scheme for wideband millimeter-wave (mmWave) massive hybrid multiple-input multiple-output (MIMO) systems, where the angle-delay domain channels' sparsity is exploited for reducing the overhead. Firstly, we consider the uplink channel estimation for time-division duplexing systems. To reduce the uplink pilot overhead for estimating the high-dimensional channels from a limited number of radio frequency (RF) chains at the base station (BS), we propose to jointly train the phase shift network and the channel estimator as an auto-encoder. Particularly, by exploiting the channels' structured sparsity from an a priori model and learning the integrated trainable parameters from the data samples, the proposed multiple-measurement-vectors learned approximate message passing (MMV-LAMP) network with the devised redundant dictionary can jointly recover multiple subcarriers' channels with significantly enhanced performance. Moreover, we consider the downlink channel estimation and feedback for frequency-division duplexing systems. Similarly, the pilots at the BS and channel estimator at the users can be jointly trained as an encoder and a decoder, respectively. Besides, to further reduce the channel feedback overhead, only the received pilots on part of the subcarriers are fed back to the BS, which can exploit the MMV-LAMP network to reconstruct the spatial-frequency channel matrix. Numerical results show that the proposed MDDL-based channel estimation and feedback scheme outperforms the state-of-the-art approaches.

cs.IT↗

Reconfigurable Intelligent Surfaces: Principles and Opportunities

Reconfigurable intelligent surfaces (RISs), also known as intelligent reflecting surfaces (IRSs), or large intelligent surfaces (LISs), have received significant attention for their potential to enhance the capacity and coverage of wireless networks by smartly reconfiguring the wireless propagation environment. Therefore, RISs are considered a promising technology for the sixth-generation (6G) of communication networks. In this context, we provide a comprehensive overview of the state-of-the-art on RISs, with focus on their operating principles, performance evaluation, beamforming design and resource management, applications of machine learning to RIS-enhanced wireless networks, as well as the integration of RISs with other emerging technologies. We describe the basic principles of RISs both from physics and communications perspectives, based on which we present performance evaluation of multi-antenna assisted RIS systems. In addition, we systematically survey existing designs for RIS-enhanced wireless networks encompassing performance analysis, information theory, and performance optimization perspectives. Furthermore, we survey existing research contributions that apply machine learning for tackling challenges in dynamic scenarios, such as random fluctuations of wireless channels and user mobility in RIS-enhanced wireless networks. Last but not least, we identify major issues and research opportunities associated with the integration of RISs and other emerging technologies for applications to next-generation networks.

eess.SP↗

Reconfigurable Intelligent Surfaces for 6G Systems: Principles, Applications, and Research Directions

Reconfigurable intelligent surfaces (RISs) or intelligent reflecting surfaces (IRSs), are regarded as one of the most promising and revolutionizing techniques for enhancing the spectrum and/or energy efficiency of wireless systems. These devices are capable of reconfiguring the wireless propagation environment by carefully tuning the phase shifts of a large number of low-cost passive reflecting elements. In this article, we aim for answering four fundmental questions: 1) Why do we need RISs? 2) What is an RIS? 3) What are RIS's applications? 4) What are the relevant challenges and future research directions? In response, eight promising research directions are pointed out.

eess.SP↗

AI-Assisted MAC for Reconfigurable Intelligent Surface-Aided Wireless Networks: Challenges and Opportunities

Recently, significant research attention has been devoted to the study of reconfigurable intelligent surfaces (RISs), which are capable of reconfiguring the wireless propagation environment by exploiting the unique properties of metamaterials-based integrated large arrays of inexpensive antennas. Existing research demonstrates that RISs significantly improve the physical layer performance, including the wireless coverage, achievable data rate and energy efficiency. However, the medium access control (MAC) of multiple users accessing an RIS-enabled channel is still in its infancy, while many open issues remain to be addressed. In this article, we present four typical RIS-aided multi-user scenarios with special emphasis on the MAC schemes. We then propose and elaborate upon centralized, distributed and hybrid artificial-intelligence (AI)-assisted MAC architectures in RIS-aided multi-user communications systems. Finally, we discuss some challenges, perspectives and potential applications of RISs as they are related to MAC design.

cs.NI↗

Robust Secure UAV Communications with the Aid of Reconfigurable Intelligent Surfaces

This paper investigates a novel unmanned aerial vehicles (UAVs) secure communication system with the assistance of reconfigurable intelligent surfaces (RISs), where an UAV and a ground user communicate with each other, while an eavesdropper tends to wiretap their information. Due to the limited capacity of UAVs, a RIS is applied to further improve the quality of the secure communications. The time division multiple access (TDMA) protocol is applied for the communications between the UAV and the ground user, namely, the downlink (DL) and the uplink (UL) communications. In particular, the channel state information (CSI) of the eavesdropping channels is assumed to be imperfect. We aim to maximize the average worst-case secrecy rate by the robust joint design of the UAV's trajectory, RIS's passive beamforming, and transmit power of the legitimate transmitters. It is challenging to solve the Joint UL/DL optimization problem due to its non-convexity. To this end, we develop an efficient algorithm based on the alternating optimization (AO) technique. Specifically, the formulated problem is divided into three sub-problems, and the successive convex approximation (SCA), S-Procedure, and semidefinite relaxation (SDR) are applied to tackle these non-convex sub-problems. Numerical results demonstrate that the proposed algorithm can considerably improve the average secrecy rate compared with the benchmark algorithms, and also confirm the robustness of the proposed algorithm.

cs.IT↗

LiFi Through Reconfigurable Intelligent Surfaces: A New Frontier for 6G?

Light fidelity (LiFi), which is based on visible light communications (VLC), is celebrated as a cutting-edge technological paradigm that is envisioned to be an indispensable part of 6G systems. Nonetheless, LiFi performance is subject to efficiently overcoming the line-of-sight blockage, whose adverse effect on wireless reception reliability becomes even more pronounced in highly dynamic environments, such as vehicular application scenarios. Meanwhile, reconfigurable intelligent surfaces (RIS) emerged recently as a revolutionary concept that transfers the physical propagation environment into a fully controllable and customisable space in a low-cost low-power fashion. We anticipate that the integration of RIS in LiFi-enabled networks will not only support blockage mitigation but will also provision complex interactions among network entities, and is hence manifested as a promising platform that enables a plethora of technological trends and new applications. In this article, for the first time in the open literature, we set the scene for a holistic overview of RIS-assisted LiFi systems. Specifically, we explore the underlying RIS architecture from the perspective of physics and present a forward-looking vision that outlines potential operational elements supported by RIS-enabled transceivers and RIS-enabled environments. Finally, we highlight major associated challenges and offer a look ahead toward promising future directions.

cs.IT↗

K-Means Clustering-Aided Non-Coherent Detection for Molecular Communications

In this paper, we consider non-coherent detection for molecular communication systems in the presence of inter-symbol-interference. In particular, we study non-coherent detectors based on memory-bits-based thresholds in order to achieve low bit-error-ratio (BER) transmission. The main challenge of realizing detectors based on memory-bits-based thresholds is to obtain the channel state information based only on the received signals. We tackle this issue by reformulating the thresholds through intermediate variables, which can be obtained by clustering multi-dimensional data from the received signals, and by using the K-means clustering algorithm. In addition to estimating the thresholds, we show that the transmitted bits can be retrieved from the clustered data. To reduce clustering errors, we propose iterative clustering methods from one-dimensional to multi-dimensional data, which are shown to reduce the BER. Simulation results are presented to verify the effectiveness of the proposed methods.

cs.IT↗

Reconfigurable Intelligent Surface-Assisted Aerial-Terrestrial Communications via Multi-Task Learning

The aerial-terrestrial communication system constitutes an efficient paradigm for supporting and complementing terrestrial communications. However, the benefits of such a system cannot be fully exploited, especially when the line-of-sight (LoS) transmissions are prone to severe deterioration due to complex propagation environments in urban areas. The emerging technology of reconfigurable intelligent surfaces (RISs) has recently become a potential solution to mitigate propagation-induced impairments and improve wireless network coverage. Motivated by these considerations, in this paper, we address the coverage and link performance problems of the aerial-terrestrial communication system by proposing an RIS-assisted transmission strategy. In particular, we design an adaptive RIS-assisted transmission protocol, in which the channel estimation, transmission strategy, and data transmission are independently implemented in a frame. On this basis, we formulate an RIS-assisted transmission strategy optimization problem as a mixed-integer non-linear program (MINLP) to maximize the overall system throughput. We then employ multi-task learning to speed up the solution to the problem. Benefiting from multi-task learning, the computation time is reduced by about four orders of magnitude. Numerical results show that the proposed RIS-assisted transmission protocol significantly improves the system throughput and reduces the transmit power.

cs.NI↗

Wireless Environment as a Service Enabled by Reconfigurable Intelligent Surfaces: The RISE-6G Perspective

The design of 6th Generation (6G) wireless networks points towards flexible connect-and-compute technologies capable to support innovative services and use cases. Targeting the 2030 horizon, 6G networks are poised to pave the way for sustainable human-centered smart societies and vertical industries, such that wireless networks will be transformed into a distributed smart connectivity infrastructure, where new terminal types are embedded in the daily environment. In this context, the RISE-6G project aims at investigating innovative solutions that capitalize on the latest advances in the emerging technology of Reconfigurable Intelligent Surfaces (RISs), which offers dynamic and goal-oriented radio wave propagation control, enabling the concept of the wireless environment as a service. The project will focus on: i) the realistic modeling of RIS-assisted signal propagation, ii) the investigation of the fundamental limits of RIS-empowered wireless communications and sensing, and iii) the design of efficient algorithms for orchestrating networking RISs, in order to implement intelligent, sustainable, and dynamically programmable wireless environments enabling diverse services that go well beyond the 5G capabilities. RISE-6G will offer two unprecedented proof-of-concepts for realizing controlled wireless environments in near-future use cases.

cs.IT↗

Reconfigurable Intelligent Surface -Assisted Ambient Backscatter Communications -- Experimental Assessment

Sixth generation (6G) mobile networks may include new passive technologies, such as ambient backscatter communication or the use of reconfigurable intelligent surfaces, to avoid the emission of waves and the corresponding energy consumption. On the one hand, a reconfigurable intelligent surface improves the network performance by adding electronically controlled reflected paths in the radio propagation channel. On the other hand, in an ambient backscatter system, a device, named tag, communicates towards a reader by backscattering the waves of an ambient source (such as a TV tower). However, the tag's backscattered signal is weak and strongly interfered by the direct signal from the ambient source. In this paper, we propose a new reconfigurable intelligent surface assisted ambient backscatter system. The proposed surface allows to control the reflection of an incident wave coming from the exact source location towards the tag and reader locations (creating hot spots at their locations), thanks to passive reflected beams from a predefined codebook. A common phase-shift can also be applied to the beam. Thanks to these features, we demonstrate experimentally that the performance of ambient backscatter communications can be significantly improved.

eess.SP↗