arXiv subjects

Marco Di Renzo

Publications and source records attributed to Marco Di Renzo.

At least 73 records · Page 4Linked to original sources

arXiv2025

Dynamical ON-OFF Control with Trajectory Prediction for Multi-RIS Wireless Networks

Reconfigurable intelligent surfaces (RISs) have demonstrated an unparalleled ability to reconfigure wireless environments by dynamically controlling the phase, amplitude, and polarization of impinging waves. However, as nearly passive reflective metasurfaces, RISs may not distinguish between desired and interference signals, which can lead to severe spectrum pollution and even affect performance negatively. In particular, in large-scale networks, the signal-to-interference-plus-noise ratio (SINR) at the receiving node can be degraded due to excessive interference reflected from the RIS. To overcome this fundamental limitation, we propose in this paper a trajectory prediction-based dynamical control algorithm (TPC) for anticipating RIS ON-OFF states sequence, integrating a long-short-term-memory (LSTM) scheme to predict user trajectories. In particular, through a codebook-based algorithm, the RIS controller adaptively coordinates the configuration of the RIS elements to maximize the received SINR. Our simulation results demonstrate the superiority of the proposed TPC method over various system settings.

cs.NI↗

arXiv2025

Channel-Aware Holographic Decision Fusion

This work investigates Distributed Detection (DD) in Wireless Sensor Networks (WSNs) utilizing channel-aware binary-decision fusion over a shared flat-fading channel. A reconfigurable metasurface, positioned in the near-field of a limited number of receive antennas, is integrated to enable a holographic Decision Fusion (DF) system. This approach minimizes the need for multiple RF chains while leveraging the benefits of a large array. The optimal fusion rule for a fixed metasurface configuration is derived, alongside two suboptimal joint fusion rule and metasurface design strategies. These suboptimal approaches strike a balance between reduced complexity and lower system knowledge requirements, making them practical alternatives. The design objective focuses on effectively conveying the information regarding the phenomenon of interest to the FC while promoting energy-efficient data analytics aligned with the Internet of Things (IoT) paradigm. Simulation results underscore the viability of holographic DF, demonstrating its advantages even with suboptimal designs and highlighting the significant energy-efficiency gains achieved by the proposed system.

eess.SP↗

arXiv2025

Towards 6G Evolution: Three Enhancements, Three Innovations, and Three Major Challenges

Over the past few decades, wireless communication has witnessed remarkable growth, experiencing several transformative changes. This article aims to provide a comprehensive overview of wireless communication technologies, from the foundations to the recent wireless advances. Specifically, we take a neutral look at the state-of-the-art technologies for 5G and the ongoing evolutions towards 6G, reviewing the recommendations of the International Mobile Communication vision for 2030 (IMT-2030). We first highlight specific features of IMT 2030, including three IMT-2020 extensions (URLLC+, eMBB+, and mMTC+) and three new innovations (Ubiquitous connectivity and integrating the new capabilities of sensing & AI with communication functionality). Then, we delve into three major challenges in implementing 6G, along with global standardization efforts. Besides, a proof of concept is provided by demonstrating terahertz (THz) signal transmission using Orbital Angular Momentum (OAM) multiplexing, which is one of the potential candidates for 6G and beyond. To inspire further potential research, we conclude by identifying research opportunities and future visions on IMT-2030 recommendations.

cs.IT↗

arXiv2025

The Larger the Merrier? Efficient Large AI Model Inference in Wireless Edge Networks

The growing demand for large artificial intelligence model (LAIM) services is driving a paradigm shift from traditional cloud-based inference to edge-based inference for low-latency, privacy-preserving applications. In particular, edge-device co-inference, which partitions LAIMs between edge devices and servers, has emerged as a promising strategy for resource-efficient LAIM execution in wireless networks. In this paper, we investigate a pruning-aware LAIM co-inference scheme, where a pre-trained LAIM is pruned and partitioned into on-device and on-server sub-models for deployment. For analysis, we first prove that the LAIM output distortion is upper bounded by its parameter distortion. Then, we derive a lower bound on parameter distortion via rate-distortion theory, analytically capturing the relationship between pruning ratio and co-inference performance. Next, based on the analytical results, we formulate an LAIM co-inference distortion bound minimization problem by jointly optimizing the pruning ratio, transmit power, and computation frequency under system latency, energy, and available resource constraints. Moreover, we propose an efficient algorithm to tackle the considered highly non-convex problem. Finally, extensive simulations demonstrate the effectiveness of the proposed design. In particular, model parameter distortion is shown to provide a reliable bound on output distortion. Also, the proposed joint pruning ratio and resource management design achieves superior performance in balancing trade-offs among inference performance, system latency, and energy consumption compared with benchmark schemes, such as fully on-device and on-server inference. Moreover, the split point is shown to play a critical role in system performance optimization under heterogeneous and resource-limited edge environments.

cs.LG↗

arXiv2025

Stacked Intelligent Metasurfaces for Multiuser Downlink Beamforming in the Wave Domain

Intelligent metasurface has recently emerged as a promising technology that enables the customization of wireless environments by harnessing large numbers of low-cost reconfigurable scattering elements. However, prior studies have predominantly focused on single-layer metasurfaces, which have limitations in terms of wave-domain processing capabilities due to practical hardware limitations. In contrast, this paper introduces a novel stacked intelligent metasurface (SIM) design. Specifically, we investigate the integration of SIM into the downlink of a multiuser multiple-input single-output (MISO) communication system, where an SIM, consisting of a multilayer metasurface structure, is deployed at the base station (BS) to facilitate transmit beamforming in the electromagnetic wave domain. This eliminates the need for conventional digital beamforming and high-resolution digital-to-analog converters at the BS. To this end, an optimization problem is formulated to maximize the sum rate of all user equipments by jointly optimizing the transmit power allocation at the BS and the wave-based beamforming at the SIM, subject to constraints on the transmit power budget and discrete phase shifts. Furthermore, we propose a computationally efficient algorithm for solving the formulated joint optimization problem and elaborate on the potential benefits of employing SIM in wireless networks. Numerical results are illustrated to corroborate the effectiveness of the proposed SIM-enabled wave-based beamforming design and to evaluate the performance improvement achieved by the proposed algorithm compared to various benchmark schemes. It is demonstrated that considering the same number of transmit antennas, the proposed SIM-based system achieves about 200\% improvement in terms of sum rate compared to conventional MISO systems. The code for this paper is available at \url{https://github.com/JianchengAn}.

cs.IT↗

arXiv2025

Energy-Efficient SIM-assisted Communications: How Many Layers Do We Need?

The stacked intelligent metasurface (SIM), comprising multiple layers of reconfigurable transmissive metasurfaces, is becoming an increasingly viable solution for future wireless communication systems. In this paper, we explore the integration of SIM in a multi-antenna base station for application to downlink multi-user communications, and a realistic power consumption model for SIM-assisted systems is presented. Specifically, we focus on maximizing the energy efficiency (EE) for hybrid precoding design, i.e., the base station digital precoding and SIM wave-based beamforming. Due to the non-convexity and high complexity of the formulated problem, we employ the quadratic transformation method to reformulate the optimization problem and propose an alternating optimization (AO)-based joint precoding framework. Specifically, a successive convex approximation (SCA) algorithm is adopted for the base station precoding design. For the SIM wave-based beamforming, two algorithms are employed: the high-performance semidefinite programming (SDP) method and the low-complexity projected gradient ascent (PGA) algorithm. In particular, the results indicate that while the optimal number of SIM layers for maximizing the EE and spectral efficiency differs, a design of 2 to 5 layers can achieve satisfactory performance for both. Finally, numerical results are illustrated to evaluate the effectiveness of the proposed hybrid precoding framework and to showcase the performance enhancement achieved by the algorithm in comparison to benchmark schemes.

cs.IT↗

arXiv2025

Beamforming Design and Association Scheme for Multi-RIS Multi-User mmWave Systems Through Graph Neural Networks

Reconfigurable intelligent surface (RIS) is emerging as a promising technology for next-generation wireless communication networks, offering a variety of merits such as the ability to tailor the communication environment. Moreover, deploying multiple RISs helps mitigate severe signal blocking between the base station (BS) and users, providing a practical and efficient solution to enhance the service coverage. However, fully reaping the potential of a multi-RIS aided communication system requires solving a non-convex optimization problem. This challenge motivates the adoption of learning-based methods for determining the optimal policy. In this paper, we introduce a novel heterogeneous graph neural network (GNN) to effectively leverage the graph topology of a wireless communication environment. Specifically, we design an association scheme that selects a suitable RIS for each user. Then, we maximize the weighted sum rate (WSR) of all the users by iteratively optimizing the RIS association scheme, and beamforming designs until the considered heterogeneous GNN converges. Based on the proposed approach, each user is associated with the best RIS, which is shown to significantly improve the system capacity in multi-RIS multi-user millimeter wave (mmWave) communications. Specifically, simulation results demonstrate that the proposed heterogeneous GNN closely approaches the performance of the high-complexity alternating optimization (AO) algorithm in the considered multi-RIS aided communication system, and it outperforms other benchmark schemes. Moreover, the performance improvement achieved through the RIS association scheme is shown to be of the order of 30%.

eess.SP↗

arXiv2025

Degrees of Freedom of Holographic MIMO -- Fundamental Theory and Analytical Methods

Holographic multiple-input multiple-output (MIMO) is envisioned as one of the most promising technology enablers for future sixth-generation (6G) networks. The use of electrically large holographic surface (HoloS) antennas has the potential to significantly boost the spatial multiplexing gain by increasing the number of degrees of freedom (DoF), even in line-of-sight (LoS) channels. In this context, the research community has shown a growing interest in characterizing the fundamental limits of this technology. In this paper, we compare the two analytical methods commonly utilized in the literature for this purpose: the cut-set integral and the self-adjoint operator. We provide a detailed description of both methods and discuss their advantages and limitations.

cs.IT↗

arXiv2025

A New OTFS-Based Index Modulation System for 6G and Beyond: OTFS-Based Code Index Modulation

This paper proposes the orthogonal time frequency space-based code index modulation (OTFS-CIM) scheme, a novel wireless communication system that combines OTFS modulation, which enhances error performance in high-mobility Rayleigh channels, with CIM technique, which improves spectral and energy efficiency, within a single-input multiple-output (SIMO) architecture. The proposed system is evaluated through Monte Carlo simulations for various system parameters. Results show that increasing the modulation order degrades performance, while more receive antennas enhance it. Comparative analyses of error performance, throughput, spectral efficiency, and energy saving demonstrate that OTFS-CIM outperforms traditional OTFS and OTFS-based spatial modulation (OTFS-SM) systems. Also, the proposed OTFS-CIM system outperforms benchmark systems in many performance metrics under high-mobility scenarios, making it a strong candidate for sixth generation (6G) and beyond.

eess.SP↗

arXiv2025

Orthogonal Time-Frequency Space (OTFS) Aided Media-Based Modulation System For 6G and Beyond Wireless Communications Networks

This paper proposes a new orthogonal time frequency space (OTFS)-based index modulation system called OTFS-aided media-based modulation (MBM) scheme (OTFS-MBM), which is a promising technique for high-mobility wireless communication systems. The OTFS technique transforms information into the delay-Doppler domain, providing robustness against channel variations, while the MBM system utilizes controllable radio frequency (RF) mirrors to enhance spectral efficiency. The combination of these two techniques offers improved bit error rate (BER) performance compared to conventional OTFS and OTFS-based spatial modulation (OTFS-SM) systems. The proposed system is evaluated through Monte Carlo simulations over high-mobility Rayleigh channels for various system parameters. Comparative throughput, spectral efficiency, and energy efficiency analyses are presented, and it is shown that OTFS-MBM outperforms traditional OTFS and OTFS-SM techniques. The proposed OTFS-MBM scheme stands out as a viable solution for sixth generation (6G) and next-generation wireless networks, enabling reliable communication in dynamic wireless environments.

eess.SP↗

arXiv2025

COLoRIS: Localization-agnostic Smart Surfaces Enabling Opportunistic ISAC in 6G Networks

The integration of Smart Surfaces in 6G communication networks, also dubbed as Reconfigurable Intelligent Surfaces (RISs), is a promising paradigm change gaining significant attention given its disruptive features. RISs are a key enabler in the realm of 6G Integrated Sensing and Communication (ISAC) systems where novel services can be offered together with the future mobile networks communication capabilities. This paper addresses the critical challenge of precisely localizing users within a communication network by leveraging the controlled-reflective properties of RIS elements without relying on more power-hungry traditional methods, e.g., GPS, adverting the need of deploying additional infrastructure and even avoiding interfering with communication efforts. Moreover, we go one step beyond: we build COLoRIS, an Opportunistic ISAC approach that leverages localization-agnostic RIS configurations to accurately position mobile users via trained learning models. Extensive experimental validation and simulations in large-scale synthetic scenarios show 5% positioning errors (with respect to field size) under different conditions. Further, we show that a low-complexity version running in a limited off-the-shelf (embedded, low-power) system achieves positioning errors in the 11% range at a negligible +2.7% energy expense with respect to the classical RIS.

cs.NI↗

arXiv2025

Degrees of Freedom of Holographic MIMO in Multi-user Near-field Channels

Holographic multiple-input multiple-output (HMIMO) is an emerging technology for 6G communications, in which numerous antenna units are integrated in a limited space. As the HMIMO array aperture expands, the near-field region of the array is dramatically enlarged, resulting in more users being located in the near-field region. This creates new opportunities for wireless communications. In this context, the evaluation of the spatial degrees of freedom (DoF) of HMIMO multi-user systems in near-field channels is an open problem, as the analytical methods utilized for evaluating the DoF in far-field channels cannot be directly applied. In this paper, we propose a novel method to calculate the DoF of HMIMO in multi-user near-field channels. We first derive the DoF for a single user in the near field, and then extend the analysis to multi-user scenarios. In this latter scenario, we focus on the impact of spatial blocking between HMIMO users. The derived analytical framework reveals that the DoF of HMIMO in multi-user near-field channels is not in general given by the sum of the DoF of the HMIMO single-user setting because of spatial blocking. Simulation results demonstrate the effectiveness of the proposed method. In the considered case study, the number of DoF reduces by $21.2\%$ on average due to spatial blocking.

eess.SP↗

arXiv2025

Survey on Beyond Diagonal RIS Enabled 6G Wireless Networks: Fundamentals, Recent Advances, and Challenges

Beyond Diagonal Reconfigurable Intelligent Surfaces (BD-RIS) represent a groundbreaking innovation in sixth-generation (6G) wireless networks, enabling unprecedented control over wireless propagation environments compared to conventional diagonal RIS (D-RIS). This survey provides a comprehensive analysis of BD-RIS, detailing its architectures, operational principles, and mathematical modeling while highlighting its performance benefits. BD-RIS classifications, including single-connected, fully-connected, and group-connected architectures, and their reflective, transmissive, hybrid, and multi-sector operating modes are examined. Recent advances in BD-RIS-enabled 6G networks are reviewed, focusing on critical areas such as channel estimation, sum-rate and spectral efficiency optimization, energy efficiency enhancement, and security. The survey identifies fundamental challenges in BD-RIS research, including hardware design limitations, adaptive channel estimation, and the impact of non-ideal hardware effects. Future research directions for BD-RIS are proposed, emphasizing the integration of artificial intelligence and machine learning (AI/ML), joint optimization of communication and sensing, and enhanced physical layer security (PLS). This study concludes by underscoring BD-RIS's transformative potential to redefine 6G wireless networks, offering valuable insights and lessons for future research and development.

eess.SP↗

arXiv2025

Opportunistic Subarray Grouping for RIS-Aided Massive Random Access in Cellular Connectivity

In Reconfigurable Intelligent Surfaces (RIS), reflective elements (REs) are typically configured as a single array, but as RE numbers increase, this approach incurs high overhead for optimal configuration. Subarray grouping provides an effective tradeoff between performance and overhead. This paper studies RIS-aided massive random access (RA) at the Medium Access Control (MAC) layer in cellular networks to enhance throughput. We introduce an opportunistic scheduling scheme that integrates multi-round access requests, subarray grouping for efficient RIS link acquisition, and multi-user data transmission. To optimize access request timing, RIS estimation overhead and throughput, we propose a multi-user RA strategy using sequential decision optimization to maximize average system throughput. A low-complexity algorithm is also developed for practical implementation. Both theoretical analysis and numerical simulations demonstrate that the proposed strategy significantly outperforms the extremes of full-array grouping and element-wise grouping.

eess.SP↗

arXiv2025

Hiding in Plain Sight: RIS-Aided Target Obfuscation in ISAC

Integrated sensing and communication (ISAC) has been identified as a promising technology for the sixth generation (6G) of communication networks. Target privacy in ISAC is essential to ensure that only legitimate sensors can detect the target while keeping it hidden from malicious ones. In this paper, we consider a downlink reconfigurable intelligent surface (RIS)-assisted ISAC system capable of protecting a sensing region against an adversarial detector. The RIS consists of both reflecting and sensing elements, adaptively changing the element assignment based on system needs. To achieve this, we minimize the maximum sensing signal-to-interference-plus-noise-ratio (SINR) at the adversarial detector within sample points in the sensing region, by optimizing the transmit beamformer at the base station, the RIS phase shift matrix, the received beamformer at the RIS, and the division between reflecting and absorptive elements at the RIS, where the latter function as sensing elements. At the same time, the system is designed to maintain a minimum sensing SINR at each monitored location, as well as minimum communication SINR for each user. To solve this challenging optimization problem, we develop an alternating optimization approach combined with a successive convex approximation based method tailored for each subproblem. Our results show that the proposed approach achieves a 25 dB reduction in the maximum sensing SINR at the adversarial detector compared to scenarios without sensing area protection. Also, the optimal RIS element assignment can further improve sensing protection by 3 dB over RISs with fixed element configuration.

eess.SP↗

arXiv2025

RiLoCo: An ISAC-oriented AI Solution to Build RIS-empowered Networks

The advance towards 6G networks comes with the promise of unprecedented performance in sensing and communication capabilities. The feat of achieving those, while satisfying the ever-growing demands placed on wireless networks, promises revolutionary advancements in sensing and communication technologies. As 6G aims to cater to the growing demands of wireless network users, the implementation of intelligent and efficient solutions becomes essential. In particular, reconfigurable intelligent surfaces (RISs), also known as Smart Surfaces, are envisioned as a transformative technology for future 6G networks. The performance of RISs when used to augment existing devices is nevertheless largely affected by their precise location. Suboptimal deployments are also costly to correct, negating their low-cost benefits. This paper investigates the topic of optimal RISs diffusion, taking into account the improvement they provide both for the sensing and communication capabilities of the infrastructure while working with other antennas and sensors. We develop a combined metric that takes into account the properties and location of the individual devices to compute the performance of the entire infrastructure. We then use it as a foundation to build a reinforcement learning architecture that solves the RIS deployment problem. Since our metric measures the surface where given localization thresholds are achieved and the communication coverage of the area of interest, the novel framework we provide is able to seamlessly balance sensing and communication, showing its performance gain against reference solutions, where it achieves simultaneously almost the reference performance for communication and the reference performance for localization.

cs.NI↗

arXiv2025

Downlink Multiuser Communications Relying on Flexible Intelligent Metasurfaces

A flexible intelligent metasurface (FIM) is composed of an array of low-cost radiating elements, each of which can independently radiate electromagnetic signals and flexibly adjust its position through a 3D surface-morphing process. In our system, an FIM is deployed at a base station (BS) that transmits to multiple single-antenna users. We formulate an optimization problem for minimizing the total downlink transmit power at the BS by jointly optimizing the transmit beamforming and the FIM's surface shape, subject to an individual signal-to-interference-plus-noise ratio (SINR) constraint for each user as well as to a constraint on the maximum morphing range of the FIM. To address this problem, an efficient alternating optimization method is proposed to iteratively update the FIM's surface shape and the transmit beamformer to gradually reduce the transmit power. Finally, our simulation results show that at a given data rate the FIM reduces the transmit power by about $3$ dB compared to conventional rigid 2D arrays.

cs.IT↗

arXiv2025

Fluid Antenna Array Enhanced Over-the-Air Computation

Over-the-air computation (AirComp) has emerged as a promising technology for fast wireless data aggregation by harnessing the superposition property of wireless multiple-access channels. This paper investigates a fluid antenna (FA) array-enhanced AirComp system, employing the new degrees of freedom achieved by antenna movements. Specifically, we jointly optimize the transceiver design and antenna position vector (APV) to minimize the mean squared error (MSE) between target and estimated function values. To tackle the resulting highly non-convex problem, we adopt an alternating optimization technique to decompose it into three subproblems. These subproblems are then iteratively solved until convergence, leading to a locally optimal solution. Numerical results show that FA arrays with the proposed transceiver and APV design significantly outperform the traditional fixed-position antenna arrays in terms of MSE.

cs.IT↗