Searcharxiv⌕ Search

arXiv subjects

Marco Di Renzo

Publications and source records attributed to Marco Di Renzo.

At least 91 records · Page 5Linked to original sources
arXiv2025

Reconfigurable Intelligent Surface (RIS) System Level Simulations for Industry Standards

Reconfigurable intelligent surface (RIS) is an emerging technology for wireless communications. In this paper, extensive system level simulations are conducted for analyzing the performance of multi-RIS and multi-base-station (BS) scenarios, by considering typical settings for industry standards. Pathloss and large-scale fading are taken into account when modeling the RIS cascaded and direct links. The performance metrics considered are the downlink reference signal received power (RSRP) and the signal to interference noise ratio (SINR). The evaluation methodology is compatible with that utilized for technology studies in industry standards development organizations, by considering the uniqueness of RIS. The simulations are comprehensive, and they take into account different layouts of RIS panels and mobiles in a cell, and different densities and sizes of RIS panels. Several practical aspects are considered, including the interference between RIS panels, the phase quantization of RIS elements, and the failure of RIS elements. The impact of near field effects for the RIS-mobile links is analyzed as well. Simulation results demonstrate the potential of RIS-aided deployments in improving the system capacity and cell coverage in 6G mobile systems.

cs.IT↗
arXiv2025

Stacked Intelligent Metasurface Enabled Near-Field Multiuser Beamfocusing in the Wave Domain

Intelligent surfaces represent a breakthrough technology capable of customizing the wireless channel cost-effectively. However, the existing works generally focus on planar wavefront, neglecting near-field spherical wavefront characteristics caused by large array aperture and high operation frequencies in the terahertz (THz). Additionally, the single-layer reconfigurable intelligent surface (RIS) lacks the signal processing ability to mitigate the computational complexity at the base station (BS). To address this issue, we introduce a novel stacked intelligent metasurfaces (SIM) comprised of an array of programmable metasurface layers. The SIM aims to substitute conventional digital baseband architecture to execute computing tasks with ultra-low processing delay, albeit with a reduced number of radio-frequency (RF) chains and low-resolution digital-to-analog converters. In this paper, we present a SIM-aided multiuser multiple-input single-output (MU-MISO) near-field system, where the SIM is integrated into the BS to perform beamfocusing in the wave domain and customize an end-to-end channel with minimized inter-user interference. Finally, the numerical results demonstrate that near-field communication achieves superior spatial gain over the far-field, and the SIM effectively suppresses inter-user interference as the wireless signals propagate through it.

cs.IT↗
arXiv2025

The ITU Vision and Framework for 6G: Scenarios, Capabilities and Enablers

With the standardization and commercialization completed at an unforeseen pace for 5th generation (5G) wireless networks, researchers, engineers and executives from the academia and industry have turned their attention to new candidate technologies that can support next generation wireless networks enabling more advanced capabilities in emerging scenarios. Explicitly, the 6th generation (6G) terrestrial wireless network aims to providing seamless connectivity not only to users but also to machine type devices for the next decade and beyond. This paper describes the progresses moving towards 6G, which is officially termed as ''international mobile telecommunications (IMT) for 2030 and beyond'' in the International Telecommunication Union Radiocommunication Sector (ITU-R). Specifically, the usage scenarios, their representative capabilities, the supporting technologies and spectrum are discussed, and research opportunities and challenges are highlighted.

cs.NI↗
arXiv2025

Metaprism Design for Wireless Communications: Angle-Frequency Analysis, Physical Realizability Constraints, and Performance Optimization

Recent advancements in smart radio environment technologies aim to enhance wireless network performance through the use of low-cost electromagnetic (EM) devices. Among these, reconfigurable intelligent surfaces (RIS) have garnered attention for their ability to modify incident waves via programmable scattering elements. An RIS is a nearly passive device, in which the tradeoff between performance, power consumption, and optimization overhead depend on how often the RIS needs to be reconfigured. This paper focuses on the metaprism (MTP), a static frequency-selective metasurface which relaxes the reconfiguration requirements of RISs and allows for the creation of different beams at various frequencies. In particular, we address the design of an ideal MTP based on its frequency-dependent reflection coefficients, defining the general properties necessary to achieve the desired beam steering function in the angle-frequency domain. We also discuss the limitations of previous studies that employed oversimplified models, which may compromise performance. Key contributions include a detailed exploration of the equivalence of the MTP to an ideal S-parameter multiport model and an analysis of its implementation using Foster's circuits. Additionally, we introduce a realistic multiport network model that incorporates aspects overlooked by ideal scattering models, along with an ad hoc optimization strategy for this model. The performance of the proposed optimization approach and circuits implementation are validated through simulations using a commercial full-wave EM simulator, confirming the effectiveness of the proposed method.

cs.IT↗
arXiv2025

Beyond Diagonal Reconfigurable Intelligent Surfaces for Multi-Carrier RF Wireless Power Transfer

Radio frequency (RF) wireless power transfer (WPT) is promising for promoting sustainability in future wireless systems, but its low end-to-end power transfer efficiency is a critical challenge. For this, reconfigurable intelligent surfaces (RISs) can be leveraged to enhance efficiency by providing nearly passive beamforming gains. Beyond diagonal (BD) RIS is a new RIS variant offering greater performance benefits than traditional diagonal RIS (D-RIS), though its potential for RF-WPT remains unexplored. Motivated by this, we consider a single-input single-output BD-RIS-aided RF-WPT system and we formulate a joint beamforming and waveform optimization problem aiming to maximize the harvested power at the receiver. We propose an optimization framework relying on successive convex approximation, alternating optimization, and semi-definite relaxation. Numerical results show that increasing the number of transmit sub-carriers or RIS elements improves the harvested power. We verify by simulation that BD-RIS leads to the same performance as D-RIS under far-field line-of-sight conditions (in the absence of mutual coupling), while it outperforms D-RIS as the non-line-of-sight components become dominant.

eess.SP↗
arXiv2024

A Tractable Closed-Form Approximation of the Ergodic Rate in Poisson Cellular Networks

The employment of stochastic geometry for the analysis and design of ultra dense networks (UDNs) has provided significant insights into network densification. In addition to the characterization of the network performance and behavior, these tools can also be exploited toward solving complex optimization problems that could maximize the capacity benefits arising in UDNs. However, this is preconditioned on the existence of tractable closed form expressions for the considered figures of merit. In this course, the present paper introduces an accurate approximation for the moment generating function (MGF) of the aggregate other-cell interference created by base stations whose positions follow a Poisson point process of given spatial density. Given the pivotal role of the MGF of the aggregate interference in stochastic geometry and the tractability of the derived MGF, the latter can be employed to substantially simplify ensuing stochastic geometry analyses. Subsequently, the present paper employs the introduced MGF to provide closed form expressions for the downlink ergodic capacity for the interference limited case, and validates the accuracy of these expressions by the use of extensive Monte Carlo simulations. The derived expressions depend on the density of users and base stations, setting out a densification road map for network operators and designers of significant value.

eess.SP↗
arXiv2024

Multiport Network Theory for Modeling and Optimizing Reconfigurable Metasurfaces

Multiport network theory (MNT) is a powerful analytical tool for modeling and optimizing complex systems based on circuit models. We present an overview of current research on the application of MNT to the development of electromagnetically consistent models for programmable metasurfaces, with focus on reconfigurable intelligent surfaces for wireless communications.

cs.IT↗
arXiv2024

A Survey on Integrated Sensing and Communication with Intelligent Metasurfaces: Trends, Challenges, and Opportunities

The emergence of technologies demanding high data rates and precise sensing, such as autonomous vehicles and IoT devices, has driven the popularity of integrated sensing and communication (ISAC) in recent years. ISAC provides a framework for communication and sensing, where both functionalities are performed simultaneously or in a coordinated manner. There are two levels of integration in ISAC: radio-communications coexistence (RCC), where communication and radar systems use distinct hardware, waveforms, and signal processing but share the spectrum; and dual-function radar-communications (DFRC), where communication and sensing share the same hardware, waveform, and signal processing. At the architectural level, intelligent metasurfaces are a key enabler for the sixth-generation (6G) of wireless communication due to their ability to control the propagation environment efficiently. With the potential to enhance communication and sensing performance, numerous studies have explored the gains of metasurfaces for ISAC. Moreover, certain ISAC frameworks address limitations associated with reconfigurable intelligent surfaces (RIS) for communication. Thus, integrating ISAC with metasurfaces enhances both technologies. This survey reviews the literature on metasurface-assisted ISAC, detailing challenges and opportunities. To provide a comprehensive overview, we begin with fundamentals of ISAC and metasurfaces. The paper summarizes state-of-the-art studies on metasurface-assisted ISAC, focusing on metasurfaces as separate entities between the transmitter and receiver (known as RIS) and emphasizing RCC and DFRC. We also review work on holographic ISAC, where metasurfaces are part of the transmitter and receiver. For each category, lessons learned, challenges, opportunities, and research directions are highlighted.

eess.SP↗
arXiv2024

Joint Precoding and AP Selection for Energy Efficient RIS-aided Cell-Free Massive MIMO Using Multi-agent Reinforcement Learning

Cell-free (CF) massive multiple-input multiple-output (mMIMO) and reconfigurable intelligent surface (RIS) are two advanced transceiver technologies for realizing future sixth-generation (6G) networks. In this paper, we investigate the joint precoding and access point (AP) selection for energy efficient RIS-aided CF mMIMO system. To address the associated computational complexity and communication power consumption, we advocate for user-centric dynamic networks in which each user is served by a subset of APs rather than by all of them. Based on the user-centric network, we formulate a joint precoding and AP selection problem to maximize the energy efficiency (EE) of the considered system. To solve this complex nonconvex problem, we propose an innovative double-layer multi-agent reinforcement learning (MARL)-based scheme. Moreover, we propose an adaptive power threshold-based AP selection scheme to further enhance the EE of the considered system. To reduce the computational complexity of the RIS-aided CF mMIMO system, we introduce a fuzzy logic (FL) strategy into the MARL scheme to accelerate convergence. The simulation results show that the proposed FL-based MARL cooperative architecture effectively improves EE performance, offering a 85\% enhancement over the zero-forcing (ZF) method, and achieves faster convergence speed compared with MARL. It is important to note that increasing the transmission power of the APs or the number of RIS elements can effectively enhance the spectral efficiency (SE) performance, which also leads to an increase in power consumption, resulting in a non-trivial trade-off between the quality of service and EE performance.

cs.IT↗
arXiv2024

Rate Region of RIS-Aided URLLC Broadcast Channels: Diagonal versus Beyond Diagonal Globally Passive RIS

We analyze the finite-block-length rate region of wireless systems aided by reconfigurable intelligent surfaces (RISs), employing treating interference as noise. We consider three nearly passive RIS architectures, including locally passive (LP) diagonal (D), globally passive (GP) D, and GP beyond diagonal (BD) RISs. In a GP RIS, the power constraint is applied globally to the whole surface, while some elements may amplify the incident signal locally. The considered RIS architectures provide substantial performance gains compared with systems operating without RIS. GP BD-RIS outperforms, at the price of increasing the complexity, LP and GP D-RIS as it enlarges the feasible set of allowed solutions. However, the gain provided by BD-RIS decreases with the number of RIS elements. Additionally, deploying RISs provides higher gains as the reliability/latency requirement becomes more stringent.

eess.SP↗
arXiv2024

Power Minimization with Rate Constraints for Multi-User MIMO Systems with Large-Size RISs

This study focuses on the optimization of a single-cell multi-user multiple-input multiple-output (MIMO) system with multiple large-size reconfigurable intelligent surfaces (RISs). The overall transmit power is minimized by optimizing the precoding coefficients and the RIS configuration, with constraints on users' signal-to-interference-plus-noise ratios (SINRs). The minimization problem is divided into two sub-problems and solved by means of an iterative alternating optimization (AO) approach. The first sub-problem focuses on finding the best precoder design. The second sub-problem optimizes the configuration of the RISs by partitioning them into smaller tiles. Each tile is then configured as a combination of pre-defined configurations. This allows the efficient optimization of RISs, especially in scenarios where the computational complexity would be prohibitive using traditional approaches. Simulation results show the good performance and limited complexity of the proposed method in comparison to benchmark schemes.

cs.IT↗
arXiv2024

Throughput Optimization in Cache-aided Networks: An Opportunistic Probing and Scheduling Approach

This paper addresses the challenges of throughput optimization in wireless cache-aided cooperative networks. We propose an opportunistic cooperative probing and scheduling strategy for efficient content delivery. The strategy involves the base station probing the relaying channels and cache states of multiple cooperative nodes, thereby enabling opportunistic user scheduling for content delivery. Leveraging the theory of Sequentially Planned Decision (SPD) optimization, we dynamically formulate decisions on cooperative probing and stopping time. Our proposed Reward Expected Thresholds (RET)-based strategy optimizes opportunistic probing and scheduling. This approach significantly enhances system throughput by exploiting gains from local caching, cooperative transmission and time diversity. Simulations confirm the effectiveness and practicality of the proposed Media Access Control (MAC) strategy.

eess.SP↗
arXiv2024

Secrecy Energy Efficiency Maximization in RIS-Aided Wireless Networks with Statistical CSI

This work studies the problem of secrecy energy efficiency maximization in multi-user wireless networks aided by reconfigurable intelligent surfaces, in which an eavesdropper overhears the uplink communication. A provably convergent optimization algorithm is proposed which optimizes the user's transmit power, metasurface reflection coefficients, and base station receive filters. The complexity of the proposed method is analyzed and numerical results are provided to show the performance of the proposed optimization method.

eess.SP↗
arXiv2024

Energy Efficiency Comparison of RIS Architectures in MISO Broadcast Channels

In this paper, we develop energy-efficient schemes for multi-user multiple-input single-output (MISO) broadcast channels (BCs), assisted by reconfigurable intelligent surfaces (RISs). To this end, we consider three architectures of RIS: locally passive diagonal (LP-D), globally passive diagonal (GP-D), and globally passive beyond diagonal (GP-BD). In a globally passive RIS, the power of the output signal of the RIS is not greater than its input power, but some RIS elements can amplify the signal. In a locally passive RIS, every element cannot amplify the incident signal. We show that these RIS architectures can substantially improve energy efficiency (EE) if the static power of the RIS elements is not too high. Moreover, GP-BD RIS, which has a higher complexity and static power than LP-D RIS and GP-D RIS, provides better spectral efficiency, but its EE performance highly depends on the static power consumption and may be worse than its diagonal counterparts.

eess.SP↗
arXiv2024

Design of Reconfigurable Intelligent Surfaces by Using S-Parameter Multiport Network Theory -- Optimization and Full-Wave Validation

Multiport network theory has been proved to be a suitable abstraction model for analyzing and optimizing reconfigurable intelligent surfaces (RISs) in an electromagnetically consistent manner, especially for studying the impact of the electromagnetic mutual coupling among radiating elements that are spaced less than half of the wavelength apart and for considering the interrelation between the amplitude and phase of the reflection coefficients. Both representations in terms of Z-parameter (impedance) and S-parameter (scattering) matrices are widely utilized. In this paper, we embrace multiport network theory for analyzing and optimizing the reradiation properties of RIS-aided channels, and provide four new contributions. (i) We offer a thorough comparison between the Z-parameter and S-parameter representations. This comparison allows us to unveil that typical scattering models utilized for RIS-aided channels ignore the structural scattering from an RIS, which is well documented in antenna theory. We show that the structural scattering results in an unwanted specular reflection. (ii) We develop an iterative algorithm for optimizing, in the presence of electromagnetic mutual coupling, the tunable loads of an RIS based on the S-parameters representation. We prove that small perturbations of the step size of the algorithm result in larger variations of the S-parameter matrix compared with the Z-parameter matrix, resulting in a faster convergence rate. (iii) We generalize the proposed algorithm to suppress the specular reflection due to the structural scattering, while maximizing the received power towards the direction of interest, and analyze the effectiveness and tradeoffs of the proposed approach. (iv) We validate the theoretical findings and algorithms with numerical simulations and a commercial full-wave electromagnetic simulator based on the method of moments.

cs.IT↗
arXiv2024

RIS-Assisted Physical Layer Security in Emerging RF and Optical Wireless Communication Systems: A Comprehensive Survey

Physical layer security (PLS) has received a growing interest from the research community for its ability to safeguard data confidentiality without relying on key distribution or encryption/decryption. However, the evolution towards the 5G technology and beyond poses new security challenges that must be addressed in order to fulfill the unprecedented performance requirements of future wireless networks. Among the potential enabling technologies, RIS has attracted extensive attention due to its ability to proactively and intelligently reconfigure the wireless propagation environment to combat dynamic wireless channel impairments. Consequently, the RIS technology can be adopted to improve the information-theoretic security of both RF and OWC systems. This survey paper provides a comprehensive overview of the information-theoretic security of RIS-based RF and optical systems. The article first discusses the fundamental concepts of PLS and RIS technologies, followed by their combination in both RF and OWC systems. Subsequently, some optimization techniques are presented in the context of the underlying system model, followed by an assessment of the impact of RIS-assisted PLS through a comprehensive performance analysis. Given that the computational complexity of future communication systems that adopt RIS-assisted PLS is likely to increase rapidly as the number of interactions between the users and infrastructure grows, ML is seen as a promising approach to address this complexity issue while sustaining or improving the network performance. A discussion of recent research studies on RIS-assisted PLS-based systems embedded with ML is presented. Furthermore, some important open research challenges are proposed and discussed to provide insightful future research directions, with the aim of moving a step closer towards the development and implementation of the forthcoming 6G wireless technology.

cs.IT↗
arXiv2024

Next Generation Advanced Transceiver Technologies for 6G and Beyond

To accommodate new applications such as extended reality, fully autonomous vehicular networks and the metaverse, next generation wireless networks are going to be subject to much more stringent performance requirements than the fifth-generation (5G) in terms of data rates, reliability, latency, and connectivity. It is thus necessary to develop next generation advanced transceiver (NGAT) technologies for efficient signal transmission and reception. In this tutorial, we explore the evolution of NGAT from three different perspectives. Specifically, we first provide an overview of new-field NGAT technology, which shifts from conventional far-field channel models to new near-field channel models. Then, three new-form NGAT technologies and their design challenges are presented, including reconfigurable intelligent surfaces, flexible antennas, and holographic multi-input multi-output (MIMO) systems. Subsequently, we discuss recent advances in semantic-aware NGAT technologies, which can utilize new metrics for advanced transceiver designs. Finally, we point out other promising transceiver technologies for future research.

cs.IT↗