arXiv subjects

Marco Pala

Publications and source records attributed to Marco Pala.

At least 19 recordsLinked to original sources

arXiv2025

Quenching statistics in Si and Ge SPADs using particle Monte Carlo simulation

Si- and Ge-based single-photon-avalanche-diodes (SPAD) are investigated by using self-consistent 3D Monte Carlo simulation, in a mixed-mode approach including the presence of a passive quenching circuit. This approach of transport allows us to capture all stochastic features of carrier transport and SPAD operation, not only for the avalanche triggering but also for the quenching process. Beyond the comparison of Si and Ge devices, we show in particular the strong inverse correlation between avalanche and quenching probabilities when tuning the bias voltage, which highlights the importance to find a tradeoff between these two probabilities for the optimization of SPAD operation.

cond-mat.other↗

arXiv2025

Hybridization in van der Waals epitaxy of PtSe2/h-BN and PtSe2/graphene heterostructures

Van der Waals (vdW) heterostructures, which combine bi-dimensional materials of different properties, enable a range of quantum phenomena. Here, we present a comparative study between the electronic properties of mono- and bi-layer of platinum diselenide (PtSe2) grown on hexagonal boron nitride (h-BN) and graphene substrates using molecular beam epitaxy (MBE). Using angle-resolved photoemission spectroscopy (ARPES) and density functional theory (DFT), the electronic structure of PtSe2/graphene and PtSe2/h-BN vdW heterostructures are investigated in systematic manner. In contrast to PtSe2/h-BN, the electronic structure of PtSe2/graphene reveals the presence of interlayer hybridization between PtSe2 and the graphene, which is evidenced by minigap openings in the {\pi}-band of graphene. Furthermore, our measurements show that the valence band maximum (VBM) of monolayer PtSe2 is located at the {\Gamma} point with different binding energies of about -0.9 eV and -0.55 eV relative to the Fermi level on h-BN and graphene and substrates, respectively. Our results represent a significant advance in the understanding of electronic hybridization between TMDs and different substrates, and they reaffirm the crucial role of the substrate in any nanoelectronic applications based on van der Waals heterostructures.

cond-mat.mtrl-sci↗

arXiv2025

Mexican hat-like valence band dispersion and quantum confinement in rhombohedral ferroelectric alpha-In2Se3

Two-dimensional (2D) ferroelectric (FE) materials offer a large variety of electronic properties depending on chemical composition, number of layers and stacking-order. Among them, alpha-In2Se3 has attracted much attention due to the promise of outstanding electronic properties, attractive quantum physics, in- and out-of-plane ferroelectricity and high photo-response. Precise experimental determination of the electronic structure of rhombohedral (3R) alpha-In2Se3 is needed for a better understanding of potential properties and device applications. Here, combining angle resolved photoemission spectroscopy (ARPES) and density functional theory (DFT) calculations, we demonstrate that 3R alpha-In2Se3 phase exhibits a robust inversion of the valence band parabolicity at the Gamma point forming a bow-shaped dispersion with a depth of 140 +- 10 meV between the valence band maximum (VBM) along the GammaK direction of the Brillouin zone (BZ). Moreover, we unveil an indirect band gap of about 1.25 eV, as well as a highly electron doping of approximatively 5.1012 electrons per cmsquare at the surface. This leads to surface band bending and the formation of a prominent electron accumulation layer. These findings allow a deeper understanding of the rhombohedral alpha-In2Se3 electronic properties underlying the potential of III/VI semiconductors for electronic and photonic technologies.

cond-mat.mtrl-sci↗

arXiv2024

Distinguishing different stackings in WSe2 bilayers grown Using Chemical Vapor Deposition

The stacking order of two-dimensional transition metal dichalcogenides (TMDs) is attracting tremendous interest as an essential component of van der Waals heterostructures. A common and fast approach to distinguish between the AAprime (2H) and AB (3R) configurations uses the relative edge orientation of each triangular layer (theta) from optical images. Here, we highlight that this method alone is not sufficient to fully identify the stacking order. Instead we propose a model and methodology to accurately determine the bilayer configuration of WSe2 using second harmonic generation (SHG) and Raman spectroscopy. We demonstrate that the SHG response of the AB phase (theta = 0) deg layers is more intense than the signal from the single layer structure. However, the SHG totally vanishes in the AAprime and ABprime phases (theta = 60 deg) and 0 deg respectively) of homo-bilayer WSe2. Also, several optical features of homo-bilayer WSe2 are found to depend on the details of the stacking order, with the difference being the clearest in the low frequency (LF) Raman frequencies, as confirmed by DFT simulation. This allows unambiguous, high-throughput, nondestructive identification of stacking order in TMDs, which is not robustly addressed in this emerging research area.

cond-mat.mtrl-sci↗

arXiv2024

High Strain Engineering of a Suspended WSSe Monolayer Membrane by Indentation and Measured by Tip-enhanced Photoluminescence

Straintronics involves the manipulation and regulation of the electronic characteristics of 2D materials through the use of macro- and nano-scale strain engineering. In this study, we utilized an atomic force microscope (AFM) coupled with an optical system to perform indentation measurements and tip-enhanced photoluminescence (TEPL), allowing us to extract the local optical response of a suspended monolayer membrane of ternary WSSe at various levels of deformation, up to strains of 10%. The photoluminescence signal is modelled considering the deformation, stress distribution and strain dependence of the WSSe band structure. We observe an additional TEPL signal that exhibits significant variation under strain, with 64 meV per percent of elongation. This peak is linked to the highly strained 2D material lying right underneath the tip. We discuss the amplification of the signal and its relation to the excitonic funnelling effect in a more comprehensive model. We will also compare the diffusion caused by Auger recombination against the radiative excitonic decay. We use TEPL to examine and comprehend the local physics of 2D semi-conducting materials subjected to extreme mechanical strain. Chemical vapour deposition-fabricated 2D ternaries possess high strain resistance, comparable to the benchmark MoS2, and a high Young's modulus of 273 GPa.

cond-mat.mes-hall↗

arXiv2023

Quasi van der Waals Epitaxy of Rhombohedral-stacked Bilayer WSe2 on GaP(111) Heterostructure

The growth of bilayers of two-dimensional (2D) materials on conventional 3D semiconductors results in 2D/3D hybrid heterostructures, which can provide additional advantages over more established 3D semiconductors while retaining some specificities of 2D materials. Understanding and exploiting these phenomena hinge on knowing the electronic properties and the hybridization of these structures. Here, we demonstrate that rhombohedral-stacked bilayer (AB stacking) can be obtained by molecular beam epitaxy growth of tungsten diselenide (WSe2) on gallium phosphide (GaP) substrate. We confirm the presence of 3R-stacking of the WSe2 bilayer structure using scanning transmission electron microscopy (STEM) and micro-Raman spectroscopy. Also, we report high-resolution angle-resolved photoemission spectroscopy (ARPES) on our rhombohedral-stacked WSe2 bilayer grown on GaP(111)B substrate. Our ARPES measurements confirm the expected valence band structure of WSe2 with the band maximum located at the gamma point of the Brillouin zone. The epitaxial growth of WSe2 on GaP(111)B heterostructures paves the way for further studies of the fundamental properties of these complex materials, as well as prospects for their implementation in devices to exploit their promising electronic and optical properties.

cond-mat.mes-hall↗

arXiv2023

Intrinsic defects and mid-gap states in quasi-one-dimensional Indium Telluride

Recently, intriguing physical properties have been unraveled in anisotropic semiconductors, in which the in-plane electronic band structure anisotropy often originates from the low crystallographic symmetry. The atomic chain is the ultimate limit in material downscaling for electronics, a frontier for establishing an entirely new field of one-dimensional quantum materials. Electronic and structural properties of chain-like InTe are essential for better understanding of device applications such as thermoelectrics. Here, we use scanning tunneling microscopy/spectroscopy (STM/STS) measurements and density functional theory (DFT) calculations to directly image the in-plane structural anisotropy in tetragonal Indium Telluride (InTe). As results, we report the direct observation of one-dimensional In1+ chains in InTe. We demonstrate that InTe exhibits a band gap of about 0.40 +-0.02 eV located at the M point of the Brillouin zone. Additionally, line defects are observed in our sample, were attributed to In1+ chain vacancy along the c-axis, a general feature in many other TlSe-like compounds. Our STS and DFT results prove that the presence of In1+ induces localized gap state, located near the valence band maximum (VBM). This acceptor state is responsible for the high intrinsic p-type doping of InTe that we also confirm using angle-resolved photoemission spectroscopy.

cond-mat.mtrl-sci↗

arXiv2023

Quantum Confinement and Electronic Structure at the Surface of van der Waals Ferroelectric {\alpha}-In$_{2}$Se$_{3}$

Two-dimensional (2D) ferroelectric (FE) materials are promising compounds for next-generation nonvolatile memories, due to their low energy consumption and high endurance. Among them, {\alpha}-In$_{2}$Se$_{3}$ has drawn particular attention due to its in- and out-of-plane ferroelectricity, whose robustness has been demonstrated down to the monolayer limit. This is a relatively uncommon behavior since most bulk FE materials lose their ferroelectric character at the 2D limit due to depolarization field. Using angle resolved photoemission spectroscopy (ARPES), we unveil another unusual 2D phenomena appearing in 2H \alpha-In$_{2}$Se$_{3}$ single crystals, the occurrence of a highly metallic two-dimensional electron gas (2DEG) at the surface of vacuum-cleaved crystals. This 2DEG exhibits two confined states which correspond to an electron density of approximatively 10$^{13}$ electrons/cm$^{3}$, also confirmed by thermoelectric measurements. Combination of ARPES and density functional theory (DFT) calculations reveals a direct band gap of energy equal to 1.3 +/- 0.1 eV, with the bottom of the conduction band localized at the center of the Brillouin zone, just below the Fermi level. Such strong n-type doping further supports the quantum confinement of electrons and the formation of the 2DEG.

cond-mat.mtrl-sci↗

arXiv2022

Unidirectional Rashba Spin Splitting in Single Layer WS$_{2(1-x)}$Se$_{2x}$ alloy

Atomically thin two-dimensional (2D) layered semiconductors such as transition metal dichalcogenides (TMDs) have attracted considerable attention due to their tunable band gap, intriguing spin-valley physics, piezoelectric effects and potential device applications. Here we study the electronic properties of a single layer WS$_{1.4}$Se$_{0.6}$ alloys. The electronic structure of this alloy, explored using angle resolved photoemission spectroscopy, shows a clear valence band structure anisotropy characterized by two paraboloids shifted in one direction of the k-space by a constant in-plane vector. This band splitting is a signature of a unidirectional Rashba spin splitting with a related giant Rashba parameter of 2.8 0.7 eV . The combination of angle resolved photoemission spectroscopy with piezo force microscopy highlights the link between this giant unidirectional Rashba spin splitting and an in-plane polarization present in the alloy. These peculiar anisotropic properties of the WS$_{1.4}$Se$_{0.6}$ alloy can be related to local atomic orders induced during the growth process due the different size and electronegativity between S and Se atoms. This distorted crystal structure combined to the observed macroscopic tensile strain, as evidenced by photoluminescence, displays electric dipoles with a strong in-plane component, as shown by piezoelectric microscopy. The interplay between semiconducting properties, in-plane spontaneous polarization and giant out-of-plane Rashba spin-splitting in this two-dimensional material has potential for a wide range of applications in next-generation electronics, piezotronics and spintronics devices.

cond-mat.mtrl-sci↗

arXiv2022

Minimum thermal conductance of twisted-layer graphite nanofibers

We study the thermal transport properties of twisted-layer graphite nanofibers. We show that in the presence of a twisted layer, the phonon thermal conductance of a graphite nanofiber varies remarkably with the twisted angle and can reach minimum values either at two critical angles $\theta_1$ and $\theta_2$ that conform to the rule $\theta_1$ + $\theta_1$ = $180^0$ or exactly at the angle $\theta$ = $90^0$. A reduction of roughly 50% of the phonon thermal conductance can be achieved in some structures. We unveil that the twisting effect mainly influences the optical modes, leaving almost unaltered the acoustic ones. The effect is also visible in the higher and more numerous van Hove singularities of the phonon density of states. We also point out that the behavior of the thermal conductance with the twisted angle is associated with and dominated by the alteration in the overlap area between the twisted and non-twisted layers. The finite-size effect is demonstrated to play an essential role in defining the critical angles at the local minimums, where these angles are dependent on the size of the investigated nanofibers, in particular on the proportion between the widths of zigzag and armchair edges.

cond-mat.mes-hall↗

arXiv2022

Evidence for Highly p-type doping and type II band alignment in large scale monolayer WSe2 /Se-terminated GaAs heterojunction grown by Molecular beam epitaxy

Two-dimensional materials (2D) arranged in hybrid van der Waals (vdW) heterostructures provide a route toward the assembly of 2D and conventional III-V semiconductors. Here, we report the structural and electronic properties of single layer WSe2 grown by molecular beam epitaxy on Se-terminated GaAs(111)B. Reflection high-energy electron diffraction images exhibit sharp streaky features indicative of a high-quality WSe2 layer produced via vdW epitaxy. This is confirmed by in-plane x-ray diffraction. The single layer of WSe2 and the absence of interdiffusion at the interface are confirmed by high resolution X-ray photoemission spectroscopy and high-resolution transmission microscopy. Angle-resolved photoemission investigation revealed a well-defined WSe2 band dispersion and a high p-doping coming from the charge transfer between the WSe2 monolayer and the Se-terminated GaAs substrate. By comparing our results with local and hybrid functionals theoretical calculation, we find that the top of the valence band of the experimental heterostructure is close to the calculations for free standing single layer WSe2. Our experiments demonstrate that the proximity of the Se-terminated GaAs substrate can significantly tune the electronic properties of WSe2. The valence band maximum (VBM, located at the K point of the Brillouin zone) presents an upshifts of about 0.56 eV toward the Fermi level with respect to the VBM of WSe2 on graphene layer, which is indicative of high p-type doping and a key feature for applications in nanoelectronics and optoelectronics.

cond-mat.mes-hall↗

arXiv2022

Hybridization and localized flat band in the WSe2/MoSe2 heterobilayer grown by molecular beam epitaxy

Nearly localized moire flat bands in momentum space, arising at particular twist angles, are the key to achieve correlated effects in transition-metal dichalcogenides. Here, we use angle-resolved photoemission spectroscopy (ARPES) to visualize the presence of a flat band near the Fermi level of van der Waals (vdW) WSe2/MoSe2 heterobilayer grown by molecular beam epitaxy. This flat band is localized near the K point of the Brillouin zone and has a width of several hundred meVs. By combining ARPES measurements with density functional theory (DFT) calculations, we confirm the coexistence of different domains, namely the reference 2H stacking without layer misorientation and regions with arbitrary twist angles. For the 2H-stacked heterobilayer, our ARPES results show strong interlayer hybridization effects, further confirmed by complementary micro- Raman spectroscopy measurements. The spin-splitting of the valence band at K is determined to be 470 meV. The valence band maximum (VBM) position of the heterobilayer is located at the Gamma point. The energy difference between the VBM at Gamma and the K point is of -60 meV, which is a stark difference compared to individual 1L WSe2 and 1L WSe2, showing both a VBM at K.

cond-mat.mtrl-sci↗

arXiv2021

Intrinsic subthermionic capabilities and high performance of easy-to-fabricate monolayer metal dihalide MOSFETs

We investigate the design of steep-slope metal-oxide-semiconductor field-effect transistors (MOSFETs) exploiting monolayers of transition metal dihalides as channel materials. With respect to other previously proposed steep-slope transistors, these devices require simplified manufacturing processes, as no confinement of the 2D material is needed, nor any tunneling heterojunction or ferroelectric gate insulators, and only n- or p-type contacts are demanded. We demonstrate their operation by studying an implementation based on monolayer CrI$_2$ through quantum transport simulations. We show that the subthermionic capabilities of the device originate from a cold-source effect, intrinsically driven by the shape of the band structure of the 2D material and robust against the effects of thermalization induced by the electron-phonon interactions. Due to the absence of a tunneling barrier when the device is switched on, current levels can be achieved that are typically out of reach for tunnel FETs. The device also exhibits excellent scaling properties, maintaining a subthermionic subthreshold swing (SS) up to channel lengths as short as 5 nm.

cond-mat.mes-hall↗

arXiv2021

Dissipative Transport and Phonon Scattering Suppression via Valley Engineering in Single-Layer Antimonene and Arsenene Field-Effect Transistors

Two-dimensional (2D) semiconductors are promising channel materials for next-generation field-effect transistors (FETs) thanks to their unique mechanical properties and enhanced electrostatic control. However, the performance of these devices can be strongly limited by the scattering processes between carriers and phonons, usually occurring at high rates in 2D materials. Here, we use quantum transport simulations calibrated on first-principle computations to report on dissipative transport in antimonene and arsenene $n$-type FETs at the scaling limit. We show that the widely-used approximations of either ballistic transport or simple acoustic deformation potential scattering result in large overestimation of the ON current, due to neglecting the dominant intervalley and optical phonon scattering processes. We additionally investigate valley engineering strategy [Nano Lett. \textbf{19}, 3723 (2019)] to improve the device performance by removing the valley degeneracy and suppressing most of the intervalley scattering channels via an uniaxial strain along the zigzag direction. The method is applicable to other similar 2D semiconductors characterized by multivalley transport.

cond-mat.mes-hall↗

arXiv2020

Indirect to direct band gap crossover in two-dimensional WS2(1-x)Se2x alloys

In atomically thin transition metal dichalcogenide semiconductors, there is a crossover from indirect to direct bandgap as the thickness drops to one monolayer, which comes with a fast increase of the photoluminescence signal. Here, we show that for different alloy compositions of WS2(1-x)Se2x this trend may be significantly affected by the alloy content and we demonstrate that the sample with the highest Se ratio presents a strongly reduced effect. The highest micro-PL intensity is found for bilayer WS2(1-x)Se2x (x = 0.8) with a decrease of its maximum value by only a factor of 2 when passing from mono- to bi-layer. To better understand this factor and explore the layer-dependent band structure evolution of WS2(1-x)Se2x, we performed a nano-angle resolved photoemission spectroscopy study coupled with first-principles calculations. We find that the high micro-PL value for bilayer WS2(1-x)Se2x (x = 0.8) is due to the overlay of direct and indirect optical transitions. This peculiar high PL intensity in WS2(1-x)Se2x opens the way for spectrally tunable light-emitting devices.

cond-mat.mes-hall↗

arXiv2020

A cold-source paradigm for steep-slope transistors based on van der Waals heterojunctions

The availability of transistors capable of operating at low supply voltage is essential to improve the key performance metric of computing circuits, i.e., the number of operations per unit energy. In this paper, we propose a new device concept for energy-efficient, steep-slope transistors based on heterojunctions of 2D materials. We show that by injecting electrons from an isolated and weakly dispersive band into a strongly dispersive one, subthermionic subthreshold swings can be obtained, as a result of a cold-source effect and of a reduced thermalization of carriers. This mechanism is implemented by integrating in a MOSFET architecture two different monolayer materials coupled through a van der Waals heterojunction, combining the subthermionic behavior of tunnel field-effect transistors (FETs) with the robustness of a MOSFET architecture against performance-degrading factors, such as traps, band tails and roughness. A further advantage with respect to tunnel FETs is that only an n-type or p-type doping is required to fabricate the device. In order to demonstrate the device concept and to discuss the underlying physics and the design options, we study through abinitio and full-quantum transport simulations a possible implementation that exploits two recently reported 2D materials.

cond-mat.mes-hall↗

arXiv2018

High performance Tunnel Field Effect Transistors based on in-plane transition metal dichalcogenide heterojunctions

In-plane heterojunction tunnel field effect transistors based on monolayer transition metal dichalcogenides are studied by means of self-consistent non-equilibrium Green's functions simulations and an atomistic tight-binding Hamiltonian. We start by comparing several heterojunctions before focusing on the most promising ones, i.e WTe2-MoS2 and MoTe2-MoS2. The scalability of those devices as a function of channel length is studied, and the influence of backgate voltages on device performance is analysed. Our results indicate that, by fine-tuning the design parameters, those devices can yield extremely low sub-threshold swings (below 5mV/decade) and Ion/Ioff ratios higher than 1e8 at a supply voltage of 0.3V, making them ideal for ultra-low power consumption.

cond-mat.mes-hall↗

arXiv2012

A new transport phenomenon in nanostructures: A mesoscopic analog of the Braess paradox encountered in road networks

The Braess paradox, known for traffic and other classical networks, lies in the fact that adding a new route to a congested network in an attempt to relieve congestion can counter-intuitively degrade the overall network performance. Recently, we have extended the concept of Braess paradox to semiconductor mesoscopic networks, whose transport properties are governed by quantum physics. In this paper, we demonstrate theoretically that, alike in classical systems, congestion plays a key role in the occurrence of a Braess paradox in mesoscopic networks.

cond-mat.mes-hall↗