arXiv subjects

Maria Bergomi

Publications and source records attributed to Maria Bergomi.

At least 19 recordsLinked to original sources

arXiv2026

MORFEO: Advancing Towards Final Design

The Multiconjugate adaptive Optics Relay For ELT Observations (MORFEO) is a first-generation adaptive optics module for the Extremely Large Telescope (ELT), designed to deliver a diffraction-limited, highly uniform 53x53 arcsec field of view to the MICADO near-infrared camera. As the project advances toward its Final Design Review (FDR), significant consolidations have been achieved across all subsystems. This paper presents an updated overview of the MORFEO system, highlighting its dual operational modes (MCAO and SCAO) and recent developments in its opto-mechanical architecture. We dedicate specific focus to the core adaptive hardware, detailing the fifth-generation post-focal deformable mirrors, the highly complex Laser Guide Star (LGS) objective zoom system required to track sodium layer variations, and the Natural Guide Star (NGS) low-order and reference sensing strategies. Furthermore, we detail the advanced pseudo-open-loop control strategy managed by a split Hard and Soft Real-Time Computer architecture. Finally, we report the latest end-to-end performance estimations obtained via the SPECULA simulation framework, demonstrating compliance with the stringent Strehl Ratio and sky coverage requirements under median atmospheric conditions.

astro-ph.IM↗

arXiv2025

SHINS, the SHARK-NIR Instrument Control Software

SHARK-NIR is a new compact instrument for coronagraphic imaging, direct imaging, and coronagraphic spectroscopy in the near-infrared wavelengths mounted at LBT. Taking advantage of the telescope's adaptive optics system, it provides high contrast imaging with coronagraphic and spectroscopic capabilities and is focused on the direct imaging of exoplanets and circumstellar discs. We present SHINS, the SHARK-NIR instrument control software, mainly realized with the TwiceAsNice framework from MPIA - Heidelberg and the ICE framework using the C++ programming language. We describe how we implemented the software components controlling several instrument subsystems, through the adaptation of already tested libraries from other instruments at LBT, such as LINC-NIRVANA. The scientific detector comes with its own readout electronic and control software interfaced with our software through INDI. We describe the C++ core software Observation Control Software, responsible for dispatching commands to the subsystems, also implementing a software solution to avoid a potential collision between motorized components, fully transparent to final users. It exposes an ICE interface and can be controlled by clients developed in different languages. Observation, calibration, and maintenance procedures are implemented by means of template scripts, written in python language, controlling Observation Control Software through its ICE interface. These templates and their parameters are configured using "ESO-style", XML Observation Blocks prepared by observers, or in general SHARK-NIR users. The high-level control is carried out by REST HTTP APIs implemented in a python back-end, also acting as a web server for the several browser-based front-end GUIs. Finally, we present the first scientific results obtained by SHARK-NIR using coronagraphic mode.

astro-ph.IM↗

arXiv2024

Pupil plane WFSs for LGS systems of giant telescopes: the case of Ingot

The Ingot WFS belongs to a class of pupil-plane WFSs designed to address the challenges posed by Sodium Laser Guide Stars, and consists of a combination of refractive and reflective surfaces, arranged into a complex prismatic shape that extends in three dimensions. Specifically, it leverages the Scheimpflug principle to sense the full 3D volume of such elongated, time-varying sources, thus optimizing the performance of the next-generation AO-assisted giant telescopes. In this work we discuss the geometrical and optical motivations endorsing the development of this class of WFSs, showing the different configurations we propose to the AO community. We also provide a first order comparative analysis with other approaches and review the state-of-the-art of the Ingot project, including improvements made in the laboratory and future milestones.

astro-ph.IM↗

arXiv2024

New developments on the Ingot WFS laboratory testing

The Ingot WFS was designed to overcome some of the challenges present in classical wavefront sensors when they deal with sodium LGSs. This innovative sensor works by sensing the full 3D volume of the elongated LGS and is suitable for use in very large telescopes. A test bench has been assembled at the INAF - Osservatorio Astronomico di Padova laboratories to test and characterize the functioning of the Ingot WFS. In this work, we summarize the main results of the tests performed on a new search algorithm. Then, we move towards a more accurate simulation of the sodium LGS by replicating real time-varying sodium layer profiles. The study of their impact on the ingot pupil signals is described in this work.

astro-ph.IM↗

arXiv2024

An Ingot-like class of WaveFront Sensors for Laser Guide Stars

Full sky coverage Adaptive Optics on Extremely Large Telescopes requires the adoption of several Laser Guide Stars as references.With such large apertures, the apparent elongation of the beacons is absolutely significant.With few exceptions,WaveFront Sensors designed for Natural Guide Stars are adapted and used in suboptimal mode in this context. We analyse and describe the geometrical properties of a class of WaveFront Sensors that are specifically designed to deal with Laser Guide Stars propagated from a location in the immediate vicinity of the telescope aperture. We describe in three dimensions the loci where the light of the Laser Guide Stars would focus in the focal volume located behind the focal plane (where astronomical objects are reimaged). We also describe the properties of several types of optomechanical devices that, through refraction and reflections, act as perturbers for this new class of pupil plane sensors, which we call ingot WaveFront Sensor. We give the recipes both for the most reasonable complex version of these WaveFront Sensors, with 6 pupils, and for the simplest one, with only 3 pupils. Both of them are referred to the ELT case. Elements to have a qualitative idea of how the sensitivity of such a new class of sensors compared to conventional ones are outlined. We present a new class of WaveFront Sensors, by carrying out the extension to the case of elongated sources at finite distance of the pyramid WaveFront Sensor and pointing out which advantages of the pyramid are retained and how it can be adopted to optimize the sensing.

astro-ph.IM↗

arXiv2023

MORFEO enters final design phase

MORFEO (Multi-conjugate adaptive Optics Relay For ELT Observations, formerly MAORY), the MCAO system for the ELT, will provide diffraction-limited optical quality to the large field camera MICADO. MORFEO has officially passed the Preliminary Design Review and it is entering the final design phase. We present the current status of the project, with a focus on the adaptive optics system aspects and expected milestones during the next project phase.

astro-ph.IM↗

arXiv2022

Laboratory testing of the Ingot WFS

The ingot WFS is a new kind of wavefront sensor specifically designed to deal with the elongation of LGS reference sources on ELT-class telescopes. Like the pyramid, it belongs to the family of pupil plane wavefront sensors and can be considered as a generalization of the pyramid WFS for extended, three-dimensional elongated sources. The current design uses a simple, reflective roof-shaped prism to split the light into three pupils that are used to retrieve the wavefront shape. A test-bench has been realized at the INAF-Padova laboratories to test the alignment and functioning of the ingot. The bench is equipped with a deformable lens, conjugated to the pupil plane, able to apply low-order aberrations and with a hexapod for the precise alignment of the ingot prism. In this work we present a robust and fully automated Python-code alignment procedure, which is able, by using the optical feedback from the I-WFS, to adjust its 6-degrees of freedom. Moreover, we report on the tests conducted with the deformable lens to characterize the ingot WFS response to low-order aberrations in terms of sensitivity and linearity. The results are used as a comparison for simulations to validate the ray-tracing modeling approach with the future goal of optimizing the procedure adopted for signal calculation and phase retrieval.

astro-ph.IM↗

arXiv2022

The Ingot WFS ON an ELT-like telescope: the project and simulations

The Ingot WFS represents an innovative and indispensable class of sensors conceived to overcome some limitations due to the LGSs geometry, which is significantly different from the point-object originated by a NGS. Here we overview the project, aiming at investigating the performance of an ELT-like telescope equipped with the Ingot WFS, facing different aspects of the program: the needs for numerical simulations and laboratory experiments, the prototype and, finally the future plan for the verification on sky.

astro-ph.IM↗

arXiv2021

LINC-NIRVANA Commissioning at the Large Binocular Telescope -- Lessons Learned

LINC-NIRVANA (LN) is one of the instruments on-board the Large Binocular Telescope (LBT). LN is a high-resolution, near-infrared imager equipped with an advanced adaptive optics module. LN implements layer-oriented Multi-Conjugate Adaptive Optics (MCAO) approach using two independent wavefront sensors per side of the binocular telescope measuring the turbulence volume above the telescope. The capability of acquiring up to 20 Natural Guide Stars simultaneously from two distinct fields of view, and using them for wavefront sensing with 20 separate pyramids per side of the telescope makes the LN MCAO system one of a kind. Commissioning of the left MCAO channel is almost complete, while that of the right arm is on-going. The Science Verification on the left side is expected to start soon after the MCAO performance is optimised for faint guide stars. In this article, we put together the lessons learned during the commissioning of the LN MCAO module. We hope and believe that this article will help the future MCAO instrument commissioning teams.

astro-ph.IM↗

arXiv2021

MAORY: A Multi-conjugate Adaptive Optics RelaY for ELT

MAORY is the adaptive optics module for ELT providing two gravity invariant ports with the same optical quality for two different client instruments. It enable high angular resolution observations in the near infrared over a large field of view (~1 arcmin2 ) by real time compensation of the wavefront distortions due to atmospheric turbulence. Wavefront sensing is performed by laser and natural guide stars while the wavefront sensor compensation is performed by an adaptive deformable mirror in MAORY which works together with the telescope's adaptive and tip tilt mirrors M4 and M5 respectively.

astro-ph.IM↗

arXiv2021

Optical design trade-off study for the AO module of MAVIS

MAVIS (MCAO-Assisted Visible Imager and Spectrograph) is an instrument proposed for the VLT Adaptive Optics Facility (AOF), which is currently in the phase-A conceptual design study. It will be the first instrument performing Multi-conjugate adaptive optics at visible wavelengths, enabling a new set of science observations. MAVIS will be installed at the Nasmyth platform of VLT UT-4 taking advantage of the already operational Adaptive Optics Facility that consists of 4 LGS and an adaptive secondary mirror with 1170 actuators. In addition, two post-focal deformable mirrors and 3 Natural Guide Stars (NGS) are foreseen for the tomographic reconstruction and correction of atmospheric turbulence. The MAVIS AO module is intended to feed both an imager and a spectrograph that will take advantage of the increased resolution and depth with respect to current instrumentation. In this paper we present the trade-off study for the optical design of the MAVIS AO module, highlighting the peculiarities of the system and the requirements imposed by AO. We propose a set of possible optical solutions able to provide a compact and efficient implementation of the different subsystems and we compare them in terms of delivered optical quality, overall throughput, encumbrance, ease of alignment and residual distortion.

astro-ph.IM↗

arXiv2021

INGOT Wavefront Sensor: from the optical design to a preliminary laboratory test

The Ingot wavefront sensor is a novel pupil-plane wavefront sensor, specifically designed to cope with the elongation typical of the extended nature of the Laser Guide Star (LGS). In the framework of the ELT, we propose an optical solution suitable for a Laser launch telescope, located outside the telescope pupil. In this paper, we present the current optical design, based on a reflective roof-shaped prism, which, at the level of the focal plane, splits the light from an LGS producing three beams. The three images of the telescope pupils can be then used for the retrieval of the first derivative of the wavefront. The 3D nature of such a device requires new alignment techniques to be determined theoretically and verified in the real world. A possible fully automated procedure, relying solely on the illumination observed at the three pupils, to align the prism to the image of the LGS is discussed. Careful attention needs to be put both on the telecentricity of the system and on the reference systems of the Ingot adjustments in the 3D space. This is crucial in order to disentangle all the possible misalignment effects. In this context, we devised a test-bench able to reproduce, in a scaled manner, the 3D illumination that the Ingot will face at the ELT, in order to validate the design and to perform preliminary tests of phase retrieval.

astro-ph.IM↗

arXiv2020

Deep observations with an ELT in the Global Multi Conjugated Adaptive Optics perspective

Deep observations of the Universe, usually as a part of sky surveys, are one of the symbols of the modern astronomy because they can allow big collaborations, exploiting multiple facilities and shared knowledge. The new generation of extremely large telescopes will play a key role because of their angular resolution and their capability in collecting the light of faint sources. Our simulations combine technical, tomographic and observational information, and benefit of the Global-Multi Conjugate Adaptive Optics (GMCAO) approach, a well demonstrated method that exploits only natural guide stars to correct the scientific field of view from the atmospheric turbulence. By simulating K-band observations of 6000 high redshift galaxies in the Chandra Deep Field South area, we have shown how an ELT can carry out photometric surveys successfully, recovering morphological and structural parameters. We present here a wide statistics of the expected performance of a GMCAO-equipped ELT in 22 well-known surveys in terms of SR.

astro-ph.IM↗

arXiv2020

INGOT WFS for LGSs: First Results from Simulations

The Ingot WFS, a Pyramid-like WFS, has been proposed as a relief to the LGS spot elongation. Actually, the artificial sources are confined in an excited cigar-shaped region in the sodium layer and portions of the telescope aperture have a corresponding different perspective. This diversity generates a variation of the WFS response depending on the illuminated sub-aperture position. The feasibility study of the INGOT WFS is developing within the MAORY project. In this work we present the numerical simulator built in order to investigate the performance of the IngotWFS in terms of Strehl Ratio, obtained reconstructing the incoming turbulent wavefront with a modal approach, in a closed-loop fashion. We also discuss the assumptions and tests we made in order to explore the range of parameters that play key roles in the game. Finally, we report on the overall results of the simulations of the performance expected by the Ingot WFS, under different conditions and input aberrations, with the aim to also compare the measured AO loop residuals with the Shack-Hartmann WFS ones, obtained working under the same assumptions.

astro-ph.IM↗

arXiv2020

Pupil plane wavefront sensing for extended and 3D sources

The basic outline of a pupil plane WaveFront Sensor is reviewed taking into account that the source to be sensed could be different from an unresolved source, i.e. it is extended, and that it could deploy also in a 3D fashion, enough to exceed the field's depth of the observing telescope. Under these conditions it is pointed out that the features of the reference are not invariant for different position on the pupil and it is shown that the INGOT WFS is the equivalent of the Pyramid for a Laser Guide Star. Under these conditions one can imagine to use a Dark WFS approach to improve the SNR of such a WFS, or to use a corrected upward beam in order to achieve a better use of the LGS photons with respect to an ideal Shack-Hartmann WFS.

astro-ph.IM↗

arXiv2020

INGOT Wavefront Sensor: Simulation of Pupil Images

The ingot wavefront sensor (I-WFS) has been proposed, for ELT-like apertures, as a possible pupil plane WFS, to cope with the geometrical characteristics of a laser guide star (LGS). Within the study and development of such a WFS, on-going in the framework of the MAORY project, the final purpose of the I-WFS simulation is to estimate its performance in terms of wavefront aberration measurement capability. The first step of this analysis is to translate incoming wavefronts into the three pupil images, produced by the optical system. The intrinsic geometrical characteristics of the ingot optical element, designed to be coupled with the LGS elongated image, make the system conceptually different with respect to other pupil WFSs (like the Pyramid WFS, P-WFS) also in terms of the simulation technique to be selected, within the ones which can be found in literature. In this paper, we aim to report the considerations and derivations which led to the selection of a ray-tracing method for ingot pupil images simulation, and the geometrical assumptions and approach made to optimize the computing time.

astro-ph.IM↗

arXiv2020

XAO-assisted coronagraphy with SHARK NIR: from simulations to laboratory tests

Several Extreme Adaptive Optics (XAO) systems dedicated to the detection and characterisation of the exoplanets are currently in operation for 8-10 meter class telescopes. Coronagraphs are commonly used in these facilities to reject the diffracted light of an observed star and enable direct imaging and spectroscopy of its circumstellar environment. SHARK-NIR is a coronagraphic camera that will be implemented at the Large Binocular Telescope (LBT). After an extensive simulation campaign, SHARK-NIR team selected a suite of coronagraphic techniques to be implemented in the instrument in order to fulfil the scientific requirements. In summary, the Gaussian Lyot coronagraph is the option to serve all those science cases requiring field-stabilization and moderate contrast. Observations in pupil-stabilized mode to search for exoplanets can take advantage of three Shaped Pupil masks (SPC) and a Four-Quadrant Phase Mask (FQPM) coronagraph. The SPC are designed for high contrast on a small field close to the star and are robust to image and pupil jitter. The FQPM allows to access the entire scientific FoV (18''x18'') and delivers excellent performance in ideal conditions (high Strehl ratios), but performance is still good, both close and further away from the star, even at lower Strehl and with moderate vibrations. After the procurement phase, the coronagraphic masks were delivered to our labs and we started to test their performance on the optical bench and define the alignment procedures that will be employed in the final integration of the instrument in our cleaning room. In this article, we describe the tests that we performed in the lab with SHARK-NIR coronagraphs. We measured the contrast achievable with each technique in very-high Strehl conditions and defined the alignment-integration procedures.

astro-ph.IM↗

arXiv2020

The CHEOPS mission

The CHaracterising ExOPlanet Satellite (CHEOPS) was selected in 2012, as the first small mission in the ESA Science Programme and successfully launched in December 2019. CHEOPS is a partnership between ESA and Switzerland with important contributions by ten additional ESA Member States. CHEOPS is the first mission dedicated to search for transits of exoplanets using ultrahigh precision photometry on bright stars already known to host planets. As a follow-up mission, CHEOPS is mainly dedicated to improving, whenever possible, existing radii measurements or provide first accurate measurements for a subset of those planets for which the mass has already been estimated from ground-based spectroscopic surveys and to following phase curves. CHEOPS will provide prime targets for future spectroscopic atmospheric characterisation. Requirements on the photometric precision and stability have been derived for stars with magnitudes ranging from 6 to 12 in the V band. In particular, CHEOPS shall be able to detect Earth-size planets transiting G5 dwarf stars in the magnitude range between 6 and 9 by achieving a photometric precision of 20 ppm in 6 hours of integration. For K stars in the magnitude range between 9 and 12, CHEOPS shall be able to detect transiting Neptune-size planets achieving a photometric precision of 85 ppm in 3 hours of integration. This is achieved by using a single, frame-transfer, back-illuminated CCD detector at the focal plane assembly of a 33.5 cm diameter telescope. The 280 kg spacecraft has a pointing accuracy of about 1 arcsec rms and orbits on a sun-synchronous dusk-dawn orbit at 700 km altitude. The nominal mission lifetime is 3.5 years. During this period, 20% of the observing time is available to the community through a yearly call and a discretionary time programme managed by ESA.

astro-ph.IM↗