arXiv subjects

Maria Varela

Publications and source records attributed to Maria Varela.

14 recordsLinked to original sources

arXiv2025

Correlating synthesis, structure and thermal stability of CuBi nanowires for spintronic applications by electron microscopy and in situ scattering methods

Bi-doped copper (Cu1-xBix) nanowires (NWs), promising candidates for spintronic applications due to their potential for a giant spin Hall effect (SHE), were synthesized and their structural properties and thermal stability were investigated. Using template-assisted electrodeposition, Cu1-xBix nanowires with varying bismuth (Bi) content (x=0, 2, 4, and 7%) and different crystalline domain sizes were fabricated. Structural analysis by advanced electron microscopy and X-ray scattering techniques revealed the influence of synthesis conditions on the resulting NW crystal structure and microstructure, including Bi localization (within the lattice or in the grain boundaries), crystallite domain dimensions, and lattice distortions. While NWs with larger crystalline domains allow homogeneous Bi incorporation into the Cu lattice, NWs with smaller crystalline domains exhibit noticeable Bi accumulation at grain boundaries. The thermal stability of the NWs was examined using variable temperature X-ray diffraction and total scattering. Upon heating, lattice distortions consistent with Bi diffusion out of the Cu lattice were observed, with subsequent crystallization of rhombohedral metallic Bi upon cooling. These findings establish a foundation for optimizing the SHE performance of Cu1-xBix nanowires for spintronic devices by correlating synthesis parameters with microstructural features and thermal behavior.

cond-mat.mtrl-sci↗

arXiv2021

Towards Non-Volatile Spin Orbit Devices: Deposition of Ferroelectric Hafnia on Monolayer Graphene/Co/HM Stacks

Although technologically challenging, the integration of ferroelectric thin films with graphene spintronics potentially allows the realization of highly efficient, electrically tuneable, non-volatile memories. Here, the atomic layer deposition (ALD) of ferroelectric Hf$_{0.5}$Zr$_{0.5}$O$_2$ (HZO) directly on graphene (Gr)/Co/heavy metal (HM) epitaxial stacks is investigated via the implementation of several nucleation methods. With an in-situ method employing an Al$_2$O$_3$ layer, the HZO demonstrates a remanent polarization (2Pr) of 19.2 $\mu C/cm^2$. An ex-situ, naturally oxidized sputtered Ta layer for nucleation produces a film with 2Pr of 10.81 $\mu C/cm^2$, but a lower coercive field over the stack and switching enduring over subsequent cycles. Magnetic hysteresis measurements taken before and after ALD deposition show strong perpendicular magnetic anisotropy (PMA), with only slight deviations in the magnetic coercive fields due to the HZO deposition process, thus pointing to a good preservation of the single-layer Gr. X-ray diffraction measurements further confirm that the high-quality interfaces demonstrated in the stack remain unperturbed by the ferroelectric deposition and anneal.

cond-mat.mtrl-sci↗

arXiv2021

Critical Effect of Bottom Electrode on Ferroelectricity of Epitaxial Hf0.5Zr0.5O2 Thin Films

Epitaxial orthorhombic Hf0.5Zr0.5O2 (HZO) films on La0.67Sr0.33MnO3 (LSMO) electrodes show robust ferroelectricity, with high polarization, endurance and retention. However, no similar results have been achieved using other perovskite electrodes so far. Here, LSMO and other perovskite electrodes are compared. A small amount of orthorhombic phase and low polarization is found in HZO films grown on La-doped BaSnO3 and Nb-doped SrTiO3, while null amounts of orthorhombic phase and polarization are detected in films on LaNiO3 and SrRuO3. The critical effect of the electrode on the stabilized phases is not consequence of differences in the electrode lattice parameter. The interface is critical, and engineering the HZO bottom interface on just a few monolayers of LSMO permits the stabilization of the orthorhombic phase. Furthermore, while the specific divalent ion (Sr or Ca) in the manganite is not relevant, reducing the La content causes a severe reduction of the amount of orthorhombic phase and the ferroelectric polarization in the HZO film.

cond-mat.mtrl-sci↗

arXiv2019

Interfacial-Redox-Induced Tuning of Superconductivity in YBa$_{2}$Cu$_{3}$O$_{7-{\delta}}$

Solid state ionic approaches for modifying ion distributions in getter/oxide heterostructures offer exciting potentials to control material properties. Here we report a simple, scalable approach allowing for total control of the superconducting transition in optimally doped YBa$_{2}$Cu$_{3}$O$_{7-{\delta}}$ (YBCO) films via a chemically-driven ionic migration mechanism. Using a thin Gd capping layer of up to 20 nm deposited onto 100 nm thick epitaxial YBCO films, oxygen is found to leach from deep within the YBCO. Progressive reduction of the superconducting transition is observed, with complete suppression possible for a sufficiently thick Gd layer. These effects arise from the combined impact of redox-driven electron doping and modification of the YBCO microstructure due to oxygen migration and depletion. This work demonstrates an effective ionic control of superconductivity in oxides, an interface induced effect that goes well into the quasi-bulk regime, opening up possibilities for electric field manipulation.

cond-mat.mtrl-sci↗

arXiv2019

Materials Structure, Properties and Dynamics through Scanning Transmission Electron Microscopy

Scanning transmission electron microscopy (STEM) has advanced rapidly in the last decade thanks to the ability to correct the major aberrations of the probe forming lens. Now atomic-sized beams are routine, even at accelerating voltages as low as 40 kV, allowing knock-on damage to be minimized in beam sensitive materials. The aberration-corrected probes can contain sufficient current for high quality, simultaneous, imaging and analysis in multiple modes. Atomic positions can be mapped with picometer precision, revealing ferroelectric domain structures, composition can be mapped by energy dispersive X-ray spectroscopy (EDX) and electron energy loss spectroscopy (EELS) and charge transfer can be tracked unit cell by unit cell using the EELS fine structure. Furthermore, dynamics of point defects can be investigated through rapid acquisition of multiple image scans. Today STEM has become an indispensable tool for analytical science at the atomic level, providing a whole new level of insights into the complex interplays that control materials properties.

cond-mat.mtrl-sci↗

arXiv2019

Few layer 2D pnictogens catalyze the alkylation of soft nucleophiles with esters

Group 15 elements in zero oxidation state (P, As, Sb and Bi), also called pnictogens, are rarely used in catalysis due to the difficulties associated in preparing well-structured and stable materials. Here, we report on the synthesis of highly exfoliated, few layer 2D phosphorene and antimonene in zero oxidation state, suspended in an ionic liquid, with the native atoms ready to interact with external reagents while avoiding aerobic or aqueous decomposition pathways, and on their use as efficient catalysts for the alkylation of nucleophiles with esters. The few layer pnictogen material circumvents the extremely harsh reaction conditions associated to previous superacid-catalyzed alkylations, by enabling an alternative mechanism on surface, protected from the water and air by the ionic liquid. These 2D catalysts allow the alkylation of a variety of acid-sensitive organic molecules and giving synthetic relevancy to the use of simple esters as alkylating agents.

physics.chem-ph↗

arXiv2018

Noncovalent Functionalization of Black Phosphorus

The first non-covalent functionalization of black phosphorus (BP) is presented. The treatment of BP with electron- withdrawing 7,7,8,8-tetracyano-p-quinodimethane (TCNQ) leads to electron transfer from BP to the organic dopant. On the other hand, the non-covalent interaction of BP with perylene diimide is mainly due to van-der-Waals interactions but also leads to a considerable stabilization of the BP flakes against oxygen degradation.

physics.chem-ph↗

arXiv2018

Unravelling Dzyaloshinskii-Moriya interaction and chiral nature of Graphene/Cobalt interface

A major challenge for future spintronics is to develop suitable spin transport channels with long spin lifetime and propagation length. Graphene can meet these requirements, even at room temperature. On the other side, taking advantage of the fast motion of chiral textures, i.e., N\'eel-type domain walls and magnetic skyrmions, can satisfy the demands for high-density data storage, low power consumption and high processing speed. We have engineered epitaxial structures where an epitaxial ferromagnetic Co layer is sandwiched between an epitaxial Pt(111) buffer grown in turn onto MgO(111) substrates and a graphene layer. We provide evidence of a graphene-induced enhancement of the perpendicular magnetic anisotropy up to 4 nm thick Co films, and of the existence of chiral left-handed N\'eel-type domain walls stabilized by the effective Dzyaloshinskii-Moriya interaction (DMI) in the stack. The experiments show evidence of a sizeable DMI at the gr/Co interface, which is described in terms of a conduction electron mediated Rashba-DMI mechanism and points opposite to the Spin Orbit Coupling-induced DMI at the Co/Pt interface. In addition, the presence of graphene results in: i) a surfactant action for the Co growth, producing an intercalated, flat, highly perfect fcc film, pseudomorphic with Pt and ii) an efficient protection from oxidation. The magnetic chiral texture is stable at room temperature and grown on insulating substrate. Our findings open new routes to control chiral spin structures using interfacial engineering in graphene-based systems for future spin-orbitronics devices fully integrated on oxide substrates.

cond-mat.mtrl-sci↗

arXiv2015

Conducting interfaces between amorphous oxide layers and SrTiO3(110) and SrTiO3(111)

Interfaces between (110) and (111)SrTiO3 (STO) single crystalline substrates and amorphous oxide layers, LaAlO3 (a-LAO), Y:ZrO2 (a-YSZ), and SrTiO3 (a-STO) become conducting above a critical thickness tc. Here we show that tc for a-LAO is not depending on the substrate orientation, i.e. tc (a-LAO/(110)STO) ~ tc(a-LAO/(111)STO) interfaces, whereas it strongly depends on the composition of the amorphous oxide: tc(a-LAO/(110)STO) < tc(a-YSZ/(110)STO) < tc(a-STO/(110)STO). It is concluded that the formation of oxygen vacancies in amorphous-type interfaces is mainly determined by the oxygen affinity of the deposited metal ions, rather than orientational-dependent enthalpy vacancy formation and diffusion. Scanning transmission microscopy characterization of amorphous and crystalline LAO/STO(110) interfaces shows much higher amount of oxygen vacancies in the former, providing experimental evidence of the distinct mechanism of conduction in these interfaces.

cond-mat.mtrl-sci↗

arXiv2015

High On/Off Ratio Memristive Switching of Manganite-Cuprate Bilayer by Interfacial Magnetoelectricity

Memristive switching serves as the basis for a new generation of electronic devices. Memristors are two-terminal devices in which the current is turned on and off by redistributing point defects, e.g., vacancies, which is difficult to control. Memristors based on alternative mechanisms have been explored, but achieving both the high On/Off ratio and the low switching energy desirable for use in electronics remains a challenge. Here we report memristive switching in a La0.7Ca0.3MnO3/PrBa2Cu3O7 bilayer with an On/Off ratio greater than 10^3 and demonstrate that the phenomenon originates from a new type of interfacial magnetoelectricity. Using results from first-principles calculations, we show that an external electric-field induces subtle displacements of the interfacial Mn ions, which switches on/off an interfacial magnetic "dead" layer, resulting in memristive behavior for spin-polarized electron transport across the bilayer. The interfacial nature of the switching entails low energy cost about of a tenth of atto Joule for write/erase a "bit". Our results indicate new opportunities for manganite/cuprate systems and other transition-metal-oxide junctions in memristive applications.

cond-mat.str-el↗

arXiv2014

Competition between covalent bonding and charge transfer at complex-oxide interfaces

Here we study the electronic properties of cuprate/manganite interfaces. By means of atomic resolution electron microscopy and spectroscopy, we produce a subnanometer scale map of the transition metal oxidation state profile across the interface between the high $T_c$ superconductor YBa$_2$Cu$_3$O$_{7-δ}$ and the colossal magnetoresistance compound (La,Ca)MnO$_3$. A net transfer of electrons from manganite to cuprate with a peculiar non-monotonic charge profile is observed. Model calculations rationalize the profile in terms of the competition between standard charge transfer tendencies (due to band mismatch), strong chemical bonding effects across the interface, and Cu substitution into the Mn lattice, with different characteristic length scales.

cond-mat.mtrl-sci↗

arXiv2010

Conducting interfaces between band insulating oxides: the LaGaO3/SrTiO3

We show that the growth of the heterostructure LaGaO3/SrTiO3 yields the formation of a highly conductive interface. Our samples were carefully analyzed by high resolution electron microscopy, in order to assess their crystal perfection and to evaluate the abruptness of the interface. Their carrier density and sheet resistance are compared to the case of LaAlO3/SrTiO3 and a superconducting transition is found. The results open the route to widening the field of polar-non polar interfaces, pose some phenomenological constrains to their underlying physics and highlight the chance of tailoring their properties for future applications by adopting suitable polar materials.

cond-mat.mtrl-sci↗

arXiv2008

Thickness dependence of the exchange bias in epitaxial manganite bilayers

Exchange bias has been studied in a series of La2/3Ca1/3MnO3 / La1/3Ca2/3MnO3 bilayers grown on (001) SrTiO3 substrates by ozone-assisted molecular beam epitaxy. The high crystalline quality of the samples and interfaces has been verified using high-resolution X-ray diffractometry and Z-contrast scanning transmission electron microscopy with electron energy loss spectroscopy. The dependence of exchange bias on the thickness of the antiferromagnetic layer has been investigated. A critical value for the onset of the hysteresis loop shift has been determined. An antiferromagnetic anisotropy constant has been obtained by fitting the results to the generalized Meiklejohn-Bean model.

cond-mat.str-el↗

arXiv2001

Production of ordered silicon nanocrystals by low-energy ion sputtering

We report on the production of ordered assemblies of silicon nanostructures by means of irradiation of a Si(100) substrate with 1.2 keV Ar ions at normal incidence. Atomic Force and High-Resolution Transmission Electron microscopies show that the silicon structures are crystalline, display homogeneous height, and spontaneously arrange into short-range hexagonal ordering. Under prolonged irradiation (up to 16 hours) all dot characteristics remain largely unchanged and a small corrugation develops at long wavelengths. We interpret the formation of the dots as a result of an instability due to the sputtering yield dependence on the local surface curvature

cond-mat.mtrl-sci↗