SearcharxivSearch

arXiv subjects

Mark C. Hersam

Publications and source records attributed to Mark C. Hersam.

At least 19 recordsLinked to original sources

Stability-Aligned Residual Adaptation for Rapid Recovery from Dynamics Shifts

Robotic systems deployed beyond controlled environments encounter abrupt and unobserved dynamics shifts that induce substantial transient performance loss, even when the nominal closed loop remains locally stabilizing. We formulate rapid inference-time recovery for physical AI as a constrained residual learning problem, in which an online correction added to a frozen reinforcement learning policy is regulated to minimize recovery time while remaining inside the robustness margin of the nominal controller. We specifically focus upon the regulation of residual's corrective authority relative to an already competent frozen policy. The learned residual produces bounded action-space corrections online, and a Stability Alignment Gate regulates this corrective authority through magnitude constraints, directional coherence, performance-conditioned regulation, and adaptive gain modulation. The method requires no environment resets, policy retraining, explicit system identification, or privileged shift information. Across mid-episode changes in actuation, mass, and contact conditions, it reduces recovery time relative to frozen SAC by up to \textbf{87\%} on Go1, \textbf{48\%} on Cassie, \textbf{30\%} on H1, and \textbf{20\%} on Scout in simulation, while preserving near-nominal steady-state performance. The framework is also characterized on two \emph{physical} robots, a Trossen ViperX manipulator and an AgileX Scout Mini, cutting recovery time by \textbf{19.5\%} on hardware without modifying onboard controller or accessing shift information.

cs.RO

Octupole-driven spin torque switching of antiferromagnetic tunnel junctions

Magnetic tunnel junctions (MTJs) based on ferromagnets are canonical devices in spintronics, with wide-ranging applications in data storage, computing, and sensing. They simultaneously exhibit mechanisms for electrical detection and control of magnetic order through the tunneling magnetoresistance (TMR) and spin-transfer torque (STT) effects, respectively. It was long assumed that neither of these effects could be sizeable in all-antiferromagnetic tunnel junctions (AATJs), since they exhibit no net magnetization. Recently, however, it was shown that AATJs based on chiral antiferromagnets do exhibit TMR due to their non-relativistic momentum-dependent spin polarization and cluster magnetic octupole moment (CMO), which are manifestations of their spin-split band structure. However, the reciprocal effect, i.e., the antiferromagnetic counterpart of STT, has been assumed non-existent due to the total electric current being spin-neutral. Here, we report nanoscale AATJs exhibiting this reciprocal effect, which we term octupole-driven spin-transfer torque (OTT). We demonstrate current-induced OTT switching of PtMn3|MgO|PtMn3 AATJs, exhibiting a TMR value of 363% at room temperature and switching current densities of the order of 10 MA/cm2. Our theoretical modeling explains the origin of OTT in terms of the imbalance between intra- and inter-sublattice spin currents across the AATJ, and equivalently, in terms of the non-zero net cluster octupole polarization of each PtMn3 layer. This work establishes a new materials platform for antiferromagnetic spintronics and provides a pathway towards deeply scaled magnetic memory and room-temperature terahertz technologies.

cond-mat.mtrl-sci

Reconfigurable field-free spin Hall nano-oscillators enabled by crystallographic anisotropy in epitaxial Co/Pt

Spin Hall nano-oscillators (SHNOs) are nanoscale microwave sources for wireless communication, neuromorphic computing and oscillator-based Ising machines, but conventional devices require a global magnetic bias. Here we replace this bias through crystallographic anisotropy in epitaxial Co/Pt. Growth of hcp Co with its c-axis in the film plane produces an anisotropy field of about 0.36 T and enables field-free auto-oscillations above 10 GHz in nanoconstriction SHNOs. The active current polarity is selected by the remanent magnetization, providing nonvolatile reconfiguration of the oscillation state. Micro-focused Brillouin light scattering confirms that the nonlinear response is confined to the nanoconstriction region. Lithographic control of the angle between the current and anisotropy axes tunes the excitation threshold and drives two spectral branches from separated modes to a dominant single branch, consistent with mutual synchronization. These results establish epitaxial crystallographic anisotropy as a route to reconfigurable field-free spintronic oscillators and oscillator networks.

cond-mat.mes-hall

Gate-tunable electronic properties of epitaxial Bi (111) films using a printable hexagonal boron nitride ionogel

Achieving effective electrostatic control of carrier transport in semimetals remains challenging due to strong screening and multiband effects. We report efficient low voltage top gated control of electronic transport in epitaxial Bi (111) thin films grown on GaAs (111) substrates using a printable hexagonal boron nitride ionogel. Magnetotransport measurements reveal pronounced nonlinear Hall conductivities arising from multiband electron and hole contributions. Remarkably, the application of a small gate voltage (less than 0.4 V in magnitude) leads to a systematic evolution of the low field Hall conductivity slope and the electron-hole compensation point. The response to gate voltage depends upon thickness and temperature. The observed behavior cannot be explained by a conventional Fermi level shift with rigid bands and instead indicates a non rigid band response associated with multiband effects and a gat tunable Rashba spin orbit coupling. Our results establish printable ionogel gating as a powerful approach to tune multiband transport in topological semimetals.

cond-mat.mtrl-sci

Microstructural Topology as a Prescriptor for Quantum Coherence: Towards A Unified Framework for Decoherence in Superconducting Qubits

In superconducting quantum circuits, decoherence improvements are frequently obtained through process interventions that simultaneously modify surface chemistry, microstructural topology, and device geometry, leaving mechanistic attribution structurally underdetermined. Predictive materials engineering requires measurable structural statistics to be separated from geometry-dependent coupling coefficients into independently testable factors. We introduce the concept of classical and quantum microstructure. In that context, we formulate a channel-wise separable framework for decoherence in superconducting transmon qubits in which each loss channel is described by a reduced prescriptor. Here, a channel-specific microstructural state variable is determined independently of device geometry, and a geometry-dependent coupling functional is computable from field solutions without reference to surface chemistry. We derive this product form from a spatially resolved kernel representation and establish a perturbative separability criterion that defines the regime where independent variation of the variables is valid. The framework specifies five prescriptor classes for dominant loss pathways in transmon-class devices. Falsifiability is operationalized through a pre-committed 2x2 experimental protocol in which the variables must satisfy independent ratio checks within propagated uncertainty. A Minimum-Dataset Specification standardizes reporting for cross-laboratory inference. Part I establishes the conceptual and mathematical architecture; coordinated experimental validation is reserved for Part II.

quant-ph

Oxide-nitride heteroepitaxy for low-loss dielectrics in superconducting quantum circuits

Superconducting qubits show great promise for the realization of fault-tolerant quantum computing, but lossy, amorphous dielectrics limit current technology. Identifying highly crystalline and stoichiometric dielectrics with intrinsically low microwave loss is therefore a central materials challenge, yet experimentally validated platforms remain scarce. In this work, we integrate a crystalline dielectric into a heteroepitaxial TiN/$γ$-Al$_2$O$_3$/TiN trilayer grown via pulsed laser deposition. Correlative high-resolution imaging, diffraction, and spectroscopy measurements confirm the single-crystal quality and chemical integrity of all layers, with minimal defects and limited anion interdiffusion across the oxide-nitride interfaces. Using microwave lumped-element resonators with parallel-plate capacitors, we report the first direct measurement of the dielectric loss of epitaxial $γ$-Al$_2$O$_3$, for which we find a low intrinsic two-level system loss, $δ_{\text{TLS}}^0 = (2.8 \pm 0.1) \times 10^{-5}$. These results establish heteroepitaxial oxides on transition metal nitrides as an attractive materials platform for superconducting quantum circuits, particularly for integration into compact device architectures such as merged-element transmons and microwave kinetic inductance detectors.

quant-ph

The Role of Defect Geometry in Localized Emission from Monolayer Tungsten Dichalcogenides

Understanding the mechanism of single photon emission (SPE) in two-dimensional (2D) material is an unsolved problem important for quantum optical materials and the development of quantum information applications. In 2D transition metal dichalcogenides (TMDs) such as tungsten diselenide (WSe2), quantum emission has been broadly attributed to exciton localization from atomic point defects, yet the precise microscopic origins are not fully understood. This work introduces an empirically grounded computational framework that explains both the origins of facile SPE in WSe2 and its relative scarcity in related TMD, tungsten disulfide. High resolution microscopy identifies native defect geometries existing in monolayer WSe2 lattices providing the ingredients necessary to build a realistic model. The qualitative effects of chalcogen type, defect geometry, and mechanical strain on the electronic structure are then individually assessed using density functional theory, from which a specific divacancy configuration emerges as the candidate for localized single-electron transitions that match observed spectral energies. Spectroscopy and photon correlation measurements further validate this model, establishing a self-consistent link between defect geometry, electronic structure, and quantum emission. By isolating the distinct roles of chalcogen type, defect configuration, and mechanical strain, this work provides a thorough investigation of exciton localization and optical behavior, contributing to a clearer picture of the physical drivers of single photon emission in tungsten-based TMDs.

cond-mat.mtrl-sci

Millimeter-Scale, Atomically Controlled 2D Topological Insulators Revealed by Multimodal Spectroscopy

Quantum spin Hall insulators, or synonymously known as 2D topological insulators, are crucial 2D systems hosting topologically protected edge states. The working temperature of this topological quantum phase is dictated by the inverted bandgap. However, the previously identified large-gap 2D topological insulators are either extremely chemically unstable, or cannot be made with atomistic precision over macroscopic scales. Here, we establish two-quintuple-layer Bi2Te3 and MnBi2Te4/Bi2Te3 heterostructures as atomically controlled, millimeter-scale 2D topological insulators, enabled by precision layer-by-layer growth that yields a carpet-like morphology extending coherently over macroscopic distances. This carpet-like growth mode renders the films amenable to mechanical exfoliation and subsequent wet or dry transfer. Multimodal spectroscopies and microscopies reveal the integer-layer tuned electronic structure of (Bi2Te3)n with excellent agreement to theory. Photon-energy-dependent photoemission and time-resolved photoemission identify band inversion and band dynamics, respectively, while scanning tunneling spectroscopy resolves topological edge states, characteristic of the 2D topological insulator phase. Thickness- and photon-energy-dependent photoemission further validates MnBi2Te4/Bi2Te3 as a robust 2D topological insulator. The large inverted gaps of ~100 meV in (Bi2Te3)2 and ~150 meV in MnBi2Te4/Bi2Te3 suggest operation near ambient temperature. These results define a scalable materials platform for next-generation, low-loss quantum and energy-efficient devices.

cond-mat.mtrl-sci

Effect of metal encapsulation on bulk superconducting properties of niobium thin films used in qubits

Niobium metal occupies nearly 100\% of the volume of a typical 2D transmon device. While the aluminum Josephson junction is of utmost importance, maintaining quantum coherence across the entire device means that pair-breaking in Nb leads, capacitive pads, and readout resonators can be a major source of decoherence. The established contributors are surface oxides and hydroxides, as well as absorbed hydrogen and oxygen. Metal encapsulation of freshly grown surfaces with non-oxidizing metals, preferably without breaking the vacuum, is a successful strategy to mitigate these issues. While the positive effects of encapsulation are undeniable, it is important to understand its impact on the macroscopic behavior of niobium films. We present a comprehensive study of the bulk superconducting properties of Nb thin films encapsulated with gold and palladium/gold, and compare them to those of bare Nb films. Magneto-optical imaging, magnetization, resistivity, and London and Campbell penetration depth measurements reveal significant differences in encapsulated samples. Both sputtered, and epitaxial Au-capped films exhibit the highest residual resistivity ratio and superconducting transition temperature, as well as the lowest upper critical field, London penetration depth, and critical current. These results are in good agreement with the microscopic theory of anisotropic normal and superconducting states of Nb. We conclude that pair-breaking in the bulk of niobium films, driven by disorder throughout the film rather than just at the surface, is a significant source of quantum decoherence in transmons. We also conclude that gold capping not only passivates the surface but also affects the properties of the entire film, significantly reducing the scattering rate due to defects likely induced by surface diffusion if the film is not protected immediately after fabrication.

cond-mat.supr-con

Cerebellar-Inspired Residual Control for Fault Recovery: From Inference-Time Adaptation to Structural Consolidation

Robotic policies deployed in real-world environments often encounter post-training faults, where retraining, exploration, or system identification are impractical. We introduce an inference-time, cerebellar-inspired residual control framework that augments a frozen reinforcement learning policy with online corrective actions, enabling fault recovery without modifying base policy parameters. The framework instantiates core cerebellar principles, including high-dimensional pattern separation via fixed feature expansion, parallel microzone-style residual pathways, and local error-driven plasticity with excitatory and inhibitory eligibility traces operating at distinct time scales. These mechanisms enable fast, localized correction under post-training disturbances while avoiding destabilizing global policy updates. A conservative, performance-driven meta-adaptation regulates residual authority and plasticity, preserving nominal behavior and suppressing unnecessary intervention. Experiments on MuJoCo benchmarks under actuator, dynamic, and environmental perturbations show improvements of up to $+66\%$ on \texttt{HalfCheetah-v5} and $+53\%$ on \texttt{Humanoid-v5} under moderate faults, with graceful degradation under severe shifts and complementary robustness from consolidating persistent residual corrections into policy parameters.

cs.LG

A Surface-Scaffolded Molecular Qubit

Fluorescent spin qubits are central building blocks of quantum technologies. Placing these qubits at surfaces maximizes coupling to nearby spins and fields, enabling nanoscale sensing and facilitating integration with photonic and superconducting devices. However, reducing the dimensions or size of established qubit systems without sacrificing the qubit performance or degrading the coherence lifetime remains challenging. Here, we introduce a surface molecular qubit formed by pentacene molecules scaffolded on a two-dimensional (2D) material, hexagonal boron nitride (hBN). The qubit exhibits stable fluorescence and optically detected magnetic resonance (ODMR) from cryogenic to ambient conditions. With fully deuterated pentacene, the Hahn-echo coherence reaches 22 $μ$s and further extends to 214 $μ$s under dynamical decoupling, outperforming state-of-the-art shallow NV centers in diamond, despite being positioned directly on the surface. We map the local spin environment, resolving couplings to nearby nuclear and electron spins that can serve as auxiliary quantum resources. This platform combines true surface integration, long qubit coherence, and scalable fabrication, opening routes to quantum sensing, quantum simulation, and hybrid quantum devices. It also paves the way for a broader family of 2D material-supported molecular qubits.

quant-ph

Oxygen distribution and segregation at grain boundaries in Nb and Ta-encapsulated Nb thin films for superconducting qubits

We report on atomic-scale analyses of oxygen distribution and segregation at grain boundaries (GBs) of Nb and Ta-encapsulated Nb (Ta/Nb) thin films for superconducting qubits using atom-probe tomography (APT) and transmission electron microscopy (TEM). We observe oxygen segregation at grain boundaries (GBs) relative to the oxygen concentration within the grains for both Nb and Ta-capped Nb thin films for superconducting qubits and find that higher oxygen concentration in the interior of Nb grains lead to greater oxygen segregation levels at GBs. This finding emphasizes that controlling oxygen impurities in Nb during film deposition and fabrication processing is important to reduce the level of oxygen segregation at GBs in Nb. The enrichment factor (Cgb/Cgrain) for oxygen segregation at GBs in Nb is 2.7 (error bar: 0.3) for Nb films, and Ta-capped Nb thin films exhibit slightly reduced Nb GB enrichment factors of 2.3 (error bar: 0.3) while GBs in the Ta capping layer itself possess higher enrichment factors of 3.0 (error bar: 0.3). We hypothesize that the Ta capping layer can trap oxygen and thereby affect oxygen in-diffusion and segregation at GBs in the underlying Nb thin films. Finally, we find that increases in the oxygen concentration in both Nb grains and GBs correlate with a suppression in the critical temperature for superconductivity (Tc). Together, our comparative chemical and charge transport property analyses provide atomic-scale insights into a potential mechanism contributing to decoherence in superconducting qubits.

cond-mat.supr-con

Vortex-Controlled Quasiparticle Multiplication and Self-Growth Dynamics in Superconducting Resonators

Even in the quantum limit, non-equilibrium quasiparticle (QP) populations induce QP poisoning that irreversibly relaxes the quantum state and significantly degrades the coherence of transmon qubits. A particularly detrimental yet previously unexplored mechanism arises from QP multiplication facilitated by vortex trapping in superconducting quantum circuits, where a high-energy QP relaxes by breaking additional Cooper pairs and amplifying the QP population due to the locally reduced excitation gap and enhanced quantum confinement within the vortex core. Here we directly resolve this elusive QP multiplication process by revealing vortex-controlled QP self-generation in a highly nonequilibrium regime preceding the phonon bottleneck of QP relaxation. At sufficiently low fluence, femtosecond-resolved magneto-reflection spectroscopy directly reveals a continuously increasing QP population that is strongly dependent on magnetic-field-tuned vortex density and absent at higher excitation fluences. Quantitative analysis of the emergent QP pre-bottleneck dynamics further reveals that, although the phonon population saturates within $\simeq$10~ps, both free and trapped QPs continue to grow in a self-sustained manner--hallmarks of the long-anticipated QP-vortex interactions in nonequilibrium superconductivity. We estimate a substantial increase of $\sim$34\% in QP density at vortex densities of $\sim$ 100 magnetic flux quanta per $\mathrm{μm^{2}}$. Our findings establish a powerful spectroscopic tool for uncovering QP multiplication and reveal vortex-assisted QP relaxation as a critical materials bottleneck whose mitigation will be essential for resolving QP poisoning and enhancing coherence in superconducting qubits.

cond-mat.supr-con

Robust interpretation of electrochemical impedance spectra using numerical complex analysis

Electrochemical Impedance Spectroscopy (EIS) is a non-invasive technique widely used for understanding charge transfer and charge transport processes in electrochemical systems and devices. Standard approaches for the interpretation of EIS data involve starting with a hypothetical circuit model for the physical processes in the device based on experience/intuition, and then fitting the EIS data to this circuit model. This work explores a mathematical approach for extracting key characteristic features from EIS data by relying on fundamental principles of complex analysis. These characteristic features can ascertain the presence of inductors and constant phase elements (non-ideal capacitors) in circuit models and enable us to answer questions about the identifiability and uniqueness of equivalent circuit models. In certain scenarios such as models with only resistors and capacitors, we are able to enumerate all possible families of circuit models. Finally, we apply the mathematical framework presented here to real-world electrochemical systems and highlight results using impedance measurements from a lithium-ion battery coin cell.

physics.app-ph

Modifying the Optical Emission of Vanadyl Phthalocyanine via Molecular Self-Assembly on van der Waals Materials

Vanadyl phthalocyanine (VOPc) is a promising organic molecule for applications in quantum information because of its thermal stability, efficient processing, and potential as a spin qubit. The deposition of VOPc in different molecular orientations allows the properties to be customized for integration into various devices. However, such customization has yet to be fully leveraged to alter its intrinsic properties, particularly optical emission. Normally, VOPc films on dielectric substrates emit a broad photoluminescence peak in the near-infrared range, attributed to transitions in the Pc ring from its pi orbital structure. In this work, we demonstrate that the dominant optical transition of VOPc can be shifted by over 250 meV through the controlled deposition of thin films on van der Waals material substrates. The weak interactions with van der Waals materials allow the molecules to uniquely self-assemble, resulting in modified optical behavior modulated by molecular phase and thickness. This work connects the self-assembling properties of molecules with their altered electronic structures and the resulting optical emission.

cond-mat.mtrl-sci

High Temperature Quantum Emission from Covalently Functionalized van der Waals Heterostructures

Two-dimensional (2D) transition metal dichalcogenides (TMDs) are attractive nanomaterials for quantum information applications due to single photon emission (SPE) from atomic defects, primarily tungsten diselenide (WSe2) monolayers. Defect and strain engineering techniques have been developed to yield high purity, deterministically positioned SPE in WSe2. However, a major challenge in application of these techniques is the low temperature required to observe defect-bound TMD exciton emission, typically limiting SPE to T<30 K. SPE at higher temperatures either loses purity or requires integration into complex devices such as optical cavities. Here, 2D heterostructure engineering and molecular functionalization are combined to achieve high purity (>90%) SPE in strained WSe2 persisting to over T=90 K. Covalent diazonium functionalization of graphite in a layered WSe2/graphite heterostructure maintains high purity up to T=90 K and single-photon source integrity up to T=115 K. This method preserves the best qualities of SPE from WSe2 while increasing working temperature to more than three times the typical range. This work demonstrates the versatility of surface functionalization and heterostructure design to synergistically improve the properties of quantum emission and offers new insights into the phenomenon of SPE from 2D materials.

cond-mat.mtrl-sci

Identifying Materials-Level Sources of Performance Variation in Superconducting Transmon Qubits

The Superconducting Materials and Systems (SQMS) Center, a DOE National Quantum Information Science Research Center, has conducted a comprehensive and coordinated study using superconducting transmon qubit chips with known performance metrics to identify the underlying materials-level sources of device-to-device performance variation. Following qubit coherence measurements, these qubits of varying base superconducting metals and substrates have been examined with various nondestructive and invasive material characterization techniques at Northwestern University, Ames National Laboratory, and Fermilab as part of a blind study. We find trends in variations of the depth of the etched substrate trench, the thickness of the surface oxide, and the geometry of the sidewall, which when combined, lead to correlations with the T$_1$ lifetime across different devices. In addition, we provide a list of features that varied from device to device, for which the impact on performance requires further studies. Finally, we identify two low-temperature characterization techniques that may potentially serve as proxy tools for qubit measurements. These insights provide materials-oriented solutions to not only reduce performance variations across neighboring devices, but also to engineer and fabricate devices with optimal geometries to achieve performance metrics beyond the state-of-the-art values.

quant-ph

The 2D Materials Roadmap

Over the past two decades, 2D materials have rapidly evolved into a diverse and expanding family of material platforms. Many members of this materials class have demonstrated their potential to deliver transformative impact on fundamental research and technological applications across different fields. In this roadmap, we provide an overview of the key aspects of 2D material research and development, spanning synthesis, properties and commercial applications. We specifically present roadmaps for high impact 2D materials, including graphene and its derivatives, transition metal dichalcogenides, MXenes as well as their heterostructures and moiré systems. The discussions are organized into thematic sections covering emerging research areas (e.g., twisted electronics, moiré nano-optoelectronics, polaritronics, quantum photonics, and neuromorphic computing), breakthrough applications in key technologies (e.g., 2D transistors, energy storage, electrocatalysis, filtration and separation, thermal management, flexible electronics, sensing, electromagnetic interference shielding, and composites) and other important topics (computational discovery of novel materials, commercialization and standardization). This roadmap focuses on the current research landscape, future challenges and scientific and technological advances required to address, with the intent to provide useful references for promoting the development of 2D materials.

cond-mat.mtrl-sci