arXiv subjects

Mark C. Hersam

Publications and source records attributed to Mark C. Hersam.

At least 37 records · Page 2Linked to original sources

arXiv2025

X-ray scattering investigation of hydride surface segregation in epitaxial Nb films

Hydride precipitation in niobium-based, superconducting circuits is a damaging side-effect of hydrofluoric acid treatments used to clean and thin the Nb surface oxides and Si oxides. The precipitate microstructure is difficult to probe because of the high hydrogen mobility in the niobium matrix. In particular, destructive techniques used to prepare samples for elemental depth profiling can change the hydride structure. Here, we use X-ray surface scattering to non-destructively probe the depth distribution of precipitates in hydrided, epitaxial, niobium thin films. We find that the niobium hydride is confined within the top ten nm of the surface.

cond-mat.mtrl-sci↗

arXiv2025

Roadmap for Photonics with 2D Materials

Triggered by the development of exfoliation and the identification of a wide range of extraordinary physical properties in self-standing films consisting of one or few atomic layers, two-dimensional (2D) materials such as graphene, transition metal dichalcogenides (TMDs), and other van der Waals (vdW) crystals currently constitute a wide research field protruding in multiple directions in combination with layer stacking and twisting, nanofabrication, surface-science methods, and integration into nanostructured environments. Photonics encompasses a multidisciplinary collection of those directions, where 2D materials contribute with polaritons of unique characteristics such as strong spatial confinement, large optical-field enhancement, long lifetimes, high sensitivity to external stimuli (e.g., electric and magnetic fields, heating, and strain), a broad spectral range from the far infrared to the ultraviolet, and hybridization with spin and momentum textures of electronic band structures. The explosion of photonics with 2D materials as a vibrant research area is producing breakthroughs, including the discovery and design of new materials and metasurfaces with unprecedented properties as well as applications in integrated photonics, light emission, optical sensing, and exciting prospects for applications in quantum information, and nanoscale thermal transport. This Roadmap summarizes the state of the art in the field, identifies challenges and opportunities, and discusses future goals and how to meet them through a wide collection of topical sections prepared by leading practitioners.

cond-mat.mtrl-sci↗

arXiv2025

Loss tangent fluctuations due to two-level systems in superconducting microwave resonators

Superconducting microwave resonators are critical to quantum computing and sensing technologies. Additionally, they are common proxies for superconducting qubits when determining the effects of performance-limiting loss mechanisms such as from two-level systems (TLS). The extraction of these loss mechanisms is often performed by measuring the internal quality factor $Q_i$ as a function of power or temperature. In this work, we investigate large temporal fluctuations of $Q_i$ at low powers over periods of 12 to 16 hours (relative standard deviation $σ_{Q_i}/Q_i = 13\%$). These fluctuations are ubiquitous across multiple resonators, chips and cooldowns. We are able to attribute these fluctuations to variations in the TLS loss tangent due to two main indicators. First, measured fluctuations decrease as power and temperature increase. Second, for interleaved measurements, we observe correlations between low- and medium-power $Q_i$ fluctuations and an absence of correlations with high-power fluctuations. Agreement with the TLS loss tangent mean is obtained by performing measurements over a time span of a few hours. We hypothesize that, in addition to decoherence due to coupling to individual near-resonant TLS, superconducting qubits are affected by these observed TLS loss tangent fluctuations.

quant-ph↗

arXiv2025

Atomic-resolution structural and spectroscopic evidence for the synthetic realization of two-dimensional copper boride

Since the first realization of borophene on Ag(111), two-dimensional (2D) boron nanomaterials have attracted significant interest due to their polymorphic diversity and potential for hosting solid-state quantum phenomena. Here, we use atomic-resolution scanning tunneling microscopy (STM) and field-emission resonance (FER) spectroscopy to elucidate the structure and properties of atomically thin boron phases grown on Cu(111). Specifically, FER spectroscopy reveals unique charge transfer and electronic states compared to the distinct borophene phases observed on silver, suggesting that the deposition of boron on copper can result in strong covalent bonding characteristic of a 2D copper boride. This conclusion is reinforced by detailed STM characterization of line defects that are consistent with density functional theory (DFT) calculations for atomically thin Cu8B14. This evidence for 2D copper boride is likely to motivate future synthetic efforts aimed at expanding the relatively unexplored family of atomically thin metal boride materials.

cond-mat.mtrl-sci↗

arXiv2024

An Autotuning-based Optimization Framework for Mixed-kernel SVM Classifications in Smart Pixel Datasets and Heterojunction Transistors

Support Vector Machine (SVM) is a state-of-the-art classification method widely used in science and engineering due to its high accuracy, its ability to deal with high dimensional data, and its flexibility in modeling diverse sources of data. In this paper, we propose an autotuning-based optimization framework to quantify the ranges of hyperparameters in SVMs to identify their optimal choices, and apply the framework to two SVMs with the mixed-kernel between Sigmoid and Gaussian kernels for smart pixel datasets in high energy physics (HEP) and mixed-kernel heterojunction transistors (MKH). Our experimental results show that the optimal selection of hyperparameters in the SVMs and the kernels greatly varies for different applications and datasets, and choosing their optimal choices is critical for a high classification accuracy of the mixed kernel SVMs. Uninformed choices of hyperparameters C and coef0 in the mixed-kernel SVMs result in severely low accuracy, and the proposed framework effectively quantifies the proper ranges for the hyperparameters in the SVMs to identify their optimal choices to achieve the highest accuracy 94.6\% for the HEP application and the highest average accuracy 97.2\% with far less tuning time for the MKH application.

cs.LG↗

arXiv2024

Co-Design of 2D Heterojunctions for Data Filtering in Tracking Systems

As particle physics experiments evolve to achieve higher energies and resolutions, handling the massive data volumes produced by silicon pixel detectors, which are used for charged particle tracking, poses a significant challenge. To address the challenge of data transport from high resolution tracking systems, we investigate a support vector machine (SVM)-based data classification system designed to reject low-momentum particles in real-time. This SVM system achieves high accuracy through the use of a customized mixed kernel function, which is specifically adapted to the data recorded by a silicon tracker. Moreover, this custom kernel can be implemented using highly efficient, novel van der Waals heterojunction devices. This study demonstrates the co-design of circuits with applications that may be adapted to meet future device and processing needs in high-energy physics (HEP) collider experiments.

physics.ins-det↗

arXiv2024

Enhanced Superconducting Qubit Performance Through Ammonium Fluoride Etch

The performance of superconducting qubits is often limited by dissipation and two-level systems (TLS) losses. The dominant sources of these losses are believed to originate from amorphous materials and defects at interfaces and surfaces, likely as a result of fabrication processes or ambient exposure. Here, we explore a novel wet chemical surface treatment at the Josephson junction-substrate and the substrate-air interfaces by replacing a buffered oxide etch (BOE) cleaning process with one that uses hydrofluoric acid followed by aqueous ammonium fluoride. We show that the ammonium fluoride etch process results in a statistically significant improvement in median $\text{T}_1$ by $\sim22\%$ ($p=0.002$), and a reduction in the number of strongly-coupled TLS in the tunable frequency range. Microwave resonator measurements on samples treated with the ammonium fluoride etch prior to niobium deposition also show $\sim33\%$ lower TLS-induced loss tangent compared to the BOE treated samples. As the chemical treatment primarily modifies the Josephson junction-substrate interface and substrate-air interface, we perform targeted chemical and structural characterizations to examine materials' differences at these interfaces and identify multiple microscopic changes that could contribute to decreased TLS.

cond-mat.mtrl-sci↗

arXiv2024

Formation and Microwave Losses of Hydrides in Superconducting Niobium Thin Films Resulting from Fluoride Chemical Processing

Superconducting Nb thin films have recently attracted significant attention due to their utility for quantum information technologies. In the processing of Nb thin films, fluoride-based chemical etchants are commonly used to remove surface oxides that are known to affect superconducting quantum devices adversely. However, these same etchants can also introduce hydrogen to form Nb hydrides, potentially negatively impacting microwave loss performance. Here, we present comprehensive materials characterization of Nb hydrides formed in Nb thin films as a function of fluoride chemical treatments. In particular, secondary-ion mass spectrometry, X-ray scattering, and transmission electron microscopy reveal the spatial distribution and phase transformation of Nb hydrides. The rate of hydride formation is determined by the fluoride solution acidity and the etch rate of Nb2O5, which acts as a diffusion barrier for hydrogen into Nb. The resulting Nb hydrides are detrimental to Nb superconducting properties and lead to increased power-independent microwave loss in coplanar waveguide resonators. However, Nb hydrides do not correlate with two-level system loss or device aging mechanisms. Overall, this work provides insight into the formation of Nb hydrides and their role in microwave loss, thus guiding ongoing efforts to maximize coherence time in superconducting quantum devices.

cond-mat.mtrl-sci↗

arXiv2024

Enhanced Imaging of Electronic Hot Spots Using Quantum Squeezed Light

Detecting electronic hot spots is important for understanding the heat dissipation and thermal management of electronic and semiconductor devices. Optical thermoreflective imaging is being used to perform precise temporal and spatial imaging of heat on wires and semiconductor materials. We apply quantum squeezed light to perform thermoreflective imaging on micro-wires, surpassing the shot-noise limit of classical approaches. We obtain a far-field temperature sensing accuracy of 42 mK after 50 ms of averaging and show that a $256\times256$ pixel image can be constructed with such sensitivity in 10 minutes. We can further obtain single-shot temperature sensing of 1.6 K after only 10 $\mathrm{μs}$ of averaging enabling dynamical study of heat dissipation. Not only do the quantum images provide accurate spatio-temporal information about heat distribution, but the measure of quantum correlation provides additional information, inaccessible by classical techniques, that can lead to a better understanding of the dynamics. We apply the technique to both Al and Nb microwires and discuss the applications of the technique in studying electron dynamics at low temperatures.

quant-ph↗

arXiv2024

Roadmap for Unconventional Computing with Nanotechnology

In the "Beyond Moore's Law" era, with increasing edge intelligence, domain-specific computing embracing unconventional approaches will become increasingly prevalent. At the same time, adopting a variety of nanotechnologies will offer benefits in energy cost, computational speed, reduced footprint, cyber resilience, and processing power. The time is ripe for a roadmap for unconventional computing with nanotechnologies to guide future research, and this collection aims to fill that need. The authors provide a comprehensive roadmap for neuromorphic computing using electron spins, memristive devices, two-dimensional nanomaterials, nanomagnets, and various dynamical systems. They also address other paradigms such as Ising machines, Bayesian inference engines, probabilistic computing with p-bits, processing in memory, quantum memories and algorithms, computing with skyrmions and spin waves, and brain-inspired computing for incremental learning and problem-solving in severely resource-constrained environments. These approaches have advantages over traditional Boolean computing based on von Neumann architecture. As the computational requirements for artificial intelligence grow 50 times faster than Moore's Law for electronics, more unconventional approaches to computing and signal processing will appear on the horizon, and this roadmap will help identify future needs and challenges. In a very fertile field, experts in the field aim to present some of the dominant and most promising technologies for unconventional computing that will be around for some time to come. Within a holistic approach, the goal is to provide pathways for solidifying the field and guiding future impactful discoveries.

cs.ET↗

arXiv2024

Systematic Improvements in Transmon Qubit Coherence Enabled by Niobium Surface Encapsulation

We present a novel transmon qubit fabrication technique that yields systematic improvements in T$_1$ relaxation times. We fabricate devices using an encapsulation strategy that involves passivating the surface of niobium and thereby preventing the formation of its lossy surface oxide. By maintaining the same superconducting metal and only varying the surface structure, this comparative investigation examining different capping materials, such as tantalum, aluminum, titanium nitride, and gold, and film substrates across different qubit foundries definitively demonstrates the detrimental impact that niobium oxides have on the coherence times of superconducting qubits, compared to native oxides of tantalum, aluminum or titanium nitride. Our surface-encapsulated niobium qubit devices exhibit T$_1$ relaxation times 2 to 5 times longer than baseline niobium qubit devices with native niobium oxides. When capping niobium with tantalum, we obtain median qubit lifetimes above 300 microseconds, with maximum values up to 600 microseconds, that represent the highest lifetimes to date for superconducting qubits prepared on both sapphire and silicon. Our comparative structural and chemical analysis suggests why amorphous niobium oxides may induce higher losses compared to other amorphous oxides. These results are in line with high-accuracy measurements of the niobium oxide loss tangent obtained with ultra-high Q superconducting radiofrequency (SRF) cavities. This new surface encapsulation strategy enables even further reduction of dielectric losses via passivation with ambient-stable materials, while preserving fabrication and scalable manufacturability thanks to the compatibility with silicon processes.

quant-ph↗

arXiv2023

All-antiferromagnetic electrically controlled memory on silicon featuring large tunneling magnetoresistance

Antiferromagnetic (AFM) materials are a pathway to spintronic memory and computing devices with unprecedented speed, energy efficiency, and bit density. Realizing this potential requires AFM devices with simultaneous electrical writing and reading of information, which are also compatible with established silicon-based manufacturing. Recent experiments have shown tunneling magnetoresistance (TMR) readout in epitaxial AFM tunnel junctions. However, these TMR structures were not grown using a silicon-compatible deposition process, and controlling their AFM order required external magnetic fields. Here we show three-terminal AFM tunnel junctions based on the noncollinear antiferromagnet PtMn3, sputter-deposited on silicon. The devices simultaneously exhibit electrical switching using electric currents, and electrical readout by a large room-temperature TMR effect. First-principles calculations explain the TMR in terms of the momentum-resolved spin-dependent tunneling conduction in tunnel junctions with noncollinear AFM electrodes.

physics.app-ph↗

arXiv2022

Layer-dependent optically-induced spin polarization in InSe

Optical control of spin in semiconductors has been pioneered using nanostructures of III-V and II-VI semiconductors, but the emergence of two-dimensional van der Waals materials offers an alternative low-dimensional platform for spintronic phenomena. Indium selenide (InSe), a group-III monochalcogenide van der Waals material, has shown promise for opto-electronics due to its high electron mobility, tunable direct bandgap, and quantum transport. There are predictions of spin-dependent optical selection rules suggesting potential for all-optical excitation and control of spin in a two-dimensional layered material. Despite these predictions, layer-dependent optical spin phenomena in InSe have yet to be explored. Here, we present measurements of layer-dependent optical spin dynamics in few-layer and bulk InSe. Polarized photoluminescence reveals layer-dependent optical orientation of spin, thereby demonstrating the optical selection rules in few-layer InSe. Spin dynamics are also studied in many-layer InSe using time-resolved Kerr rotation spectroscopy. By applying out-of-plane and in-plane static magnetic fields for polarized emission measurements and Kerr measurements, respectively, the $g$-factor for InSe was extracted. Further investigations are done by calculating precession values using a $\textbf{k} \cdot \textbf{p}$ model, which is supported by \textit{ab-initio} density functional theory. Comparison of predicted precession rates with experimental measurements highlights the importance of excitonic effects in InSe for understanding spin dynamics. Optical orientation of spin is an important prerequisite for opto-spintronic phenomena and devices, and these first demonstrations of layer-dependent optical excitation of spins in InSe lay the foundation for combining layer-dependent spin properties with advantageous electronic properties found in this material.

cond-mat.mtrl-sci↗

arXiv2022

Characterization of Nb films for superconducting qubits using phase boundary measurements

Continued advances in superconducting qubit performance require more detailed understandings of the many sources of decoherence. Within these devices, two-level systems arise due to defects, interfaces, and grain boundaries, and are thought to be a major source of qubit decoherence at millikelvin temperatures. In addition to Al, Nb is a commonly used metalization layer for superconducting qubits. Consequently, a significant effort is required to develop and qualify processes that mitigate defects in Nb films. As the fabrication of complete superconducting qubits and their characterization at millikelvin temperatures is a time and resource intensive process, it is desirable to have measurement tools that can rapidly characterize the properties of films and evaluate different treatments. Here we show that measurements of the variation of the superconducting critical temperature $T_c$ with an applied external magnetic field $H$ (of the phase boundary $T_c - H$) performed with very high resolution show features that are directly correlated with the structure of the Nb films. In combination with x-ray diffraction measurements, we show that one can even distinguish variations quality and crystal orientation of the grains in a Nb film by small but reproducible changes in the measured superconducting phase boundary.

cond-mat.supr-con↗

arXiv2022

Developing a Chemical and Structural Understanding of the Surface Oxide in a Niobium Superconducting Qubit

Superconducting thin films of niobium have been extensively employed in transmon qubit architectures. Although these architectures have demonstrated remarkable improvements in recent years, further improvements in performance through materials engineering will aid in large-scale deployment. Here, we use information retrieved from secondary ion mass spectrometry and electron microscopy to conduct a detailed assessment of the surface oxide that forms in ambient conditions for transmon test qubit devices patterned from a niobium film. We observe that this oxide exhibits a varying stoichiometry with NbO and NbO$_2$ found closer to the niobium film and Nb$_2$O$_5$ found closer to the surface. In terms of structural analysis, we find that the Nb$_2$O$_5$ region is semicrystalline in nature and exhibits randomly oriented grains on the order of 1-2 nm corresponding to monoclinic N-Nb$_2$O$_5$ that are dispersed throughout an amorphous matrix. Using fluctuation electron microscopy, we are able to map the relative crystallinity in the Nb$_2$O$_5$ region with nanometer spatial resolution. Through this correlative method, we observe that amorphous regions are more likely to contain oxygen vacancies and exhibit weaker bonds between the niobium and oxygen atoms. Based on these findings, we expect that oxygen vacancies likely serve as a decoherence mechanism in quantum systems.

cond-mat.mes-hall↗

arXiv2021

Towards quantification of the ratio of the single and double wall carbon nanotubes in their mixtures:An In situ Raman spectroelectrochemical study

Mixtures containing different weight ratios of single wall carbon nanotubes (SWCNT) and double wall carbon nanotubes (DWCNT) were prepared and studied by in-situ Raman spectroelectrochemistry. Two components of the G-prime mode in the Raman spectra, which can be resolved at high electrode potentials, were assigned to the signals from inner tubes of DWCNT and outer tubes of DWCNT together with SWCNT. The dependence of the ratios of these two components of the G-prime mode on the nominal amount of SWCNT and DWCNT in the samples was simulated so that the residual amount of SWCNT in the original DWCNT could be determined. Additionally, the individual contributions of all components of carbon nanotubes into the total area of the G-prime mode at high electrode potentials were estimated from the simulation.

cond-mat.mtrl-sci↗

arXiv2021

Ingrained -- An automated framework for fusing atomic-scale image simulations into experiments

To fully leverage the power of image simulation to corroborate and explain patterns and structures in atomic resolution microscopy (e.g., electron and scanning probe), an initial correspondence between the simulation and experimental image must be established at the outset of further high accuracy simulations or calculations. Furthermore, if simulation is to be used in context of highly automated processes or high-throughput optimization, the process of finding this correspondence itself must be automated. In this work, we introduce ingrained, an open-source automation framework which solves for this correspondence and fuses atomic resolution image simulations into the experimental images to which they correspond. We describe herein the overall ingrained workflow, focusing on its application to interface structure approximations, and the development of an experimentally rationalized forward model for scanning tunneling microscopy simulation.

cond-mat.mtrl-sci↗

arXiv2021

Observation of current-induced switching in non-collinear antiferromagnetic IrMn$_3$ by differential voltage measurements

There is accelerating interest in developing memory devices using antiferromagnetic (AFM) materials, motivated by the possibility for electrically controlling AFM order via spin-orbit torques, and its read-out via magnetoresistive effects. Recent studies have shown, however, that high current densities create non-magnetic contributions to resistive switching signals in AFM/heavy metal (AFM/HM) bilayers, complicating their interpretation. Here we introduce an experimental protocol to unambiguously distinguish current-induced magnetic and nonmagnetic switching signals in AFM/HM structures, and demonstrate it in IrMn$_3$/Pt devices. A six-terminal double-cross device is constructed, with an IrMn$_3$ pillar placed on one cross. The differential voltage is measured between the two crosses with and without IrMn$_3$ after each switching attempt. For a wide range of current densities, reversible switching is observed only when write currents pass through the cross with the IrMn$_3$ pillar, eliminating any possibility of non-magnetic switching artifacts. Micromagnetic simulations support our findings, indicating a complex domain-mediated switching process.

cond-mat.mes-hall↗