arXiv subjects

Mark Yim

Publications and source records attributed to Mark Yim.

At least 19 recordsLinked to original sources

arXiv2026

Object Manipulation of the Variable Topology Truss system

This paper presents an object manipulation strategy for the Variable Topology Truss (VTT) system, a truss robot that comprises actuated truss members connected by passive spherical joints. Although truss robots were originally proposed as rapidly deployable manipulators, manipulation strategy has not been studied thoroughly. To enable manipulation, we introduce a hybrid control framework that regulates position and force concurrently without explicit decoupling. At the actuator level, each member employs a sensor-based force feedback controller to generate the desired axial forces despite high actuator friction. At the task level, the forces applied at the end-effector nodes are produced by computing the required member forces using a static model of the VTT. We evaluate force-tracking performance through experiments on both a single member module and the full VTT system. Finally, we demonstrate object manipulation using two representative configurations and quantitatively assess combined position and force tracking performance. Experimental results confirm that the proposed approach enables consistent and reliable object manipulation with the VTT system.

cs.RO↗

arXiv2026

Interdisciplinary Workshop on Mechanical Intelligence: Summary Report

This report provides a summary of the outcomes of the Interdisciplinary Workshop on Mechanical Intelligence held in 2024. Mechanical Intelligence (MI) represents the phenomenon that novel structural features of material/biological/robotic systems can encode intelligence through responsiveness, adaptivity, memory, and learning in the mechanical structure itself. This is in contrast to computational intelligence, wherein the intelligence functions occur through electrical signaling and computer code. The two-day workshop was held at NSF headquarters on May 30-31 and included 38 invited academic researcher participants, and 8 program officers from the NSF. The workshop was structured around active small and large group discussions in groups of 4-5 and 9-10 with the goal of addressing topical questions on MI. Working groups entered notes into shared presentation slides for each discussion session and presented their outcomes in a final presentation on the last day. Here we summarize the overall outcomes of the workshop.

cs.RO↗

arXiv2026

Scout-Rover cooperation: online terrain strength mapping and traversal risk estimation for planetary-analog explorations

Robot-aided exploration of planetary surfaces is essential for understanding geologic processes, yet many scientifically valuable regions, such as Martian dunes and lunar craters, remain hazardous due to loose, deformable regolith. We present a scout-rover cooperation framework that expands safe access to such terrain using a hybrid team of legged and wheeled robots. In our approach, a high-mobility legged robot serves as a mobile scout, using proprioceptive leg-terrain interactions to estimate regolith strength during locomotion and construct spatially resolved terrain maps. These maps are integrated with rover locomotion models to estimate traversal risk and inform path planning. We validate the framework through analogue missions at the NASA Ames Lunar Simulant Testbed and the White Sands Dune Field. Experiments demonstrate (1) online terrain strength mapping from legged locomotion and (2) rover-specific traversal-risk estimation enabling safe navigation to scientific targets. Results show that scout-generated terrain maps reliably capture spatial variability and predict mobility failure modes, allowing risk-aware path planning that avoids hazardous regions. By combining embodied terrain sensing with heterogeneous rover cooperation, this framework enhances operational robustness and expands the reachable science workspace in deformable planetary environments.

cs.RO↗

arXiv2025

Online Multi-Robot Coordination and Cooperation with Task Precedence Relationships

We propose a new formulation for the multi-robot task allocation problem that incorporates (a) complex precedence relationships between tasks, (b) efficient intra-task coordination, and (c) cooperation through the formation of robot coalitions. A task graph specifies the tasks and their relationships, and a set of reward functions models the effects of coalition size and preceding task performance. Maximizing task rewards is NP-hard; hence, we propose network flow-based algorithms to approximate solutions efficiently. A novel online algorithm performs iterative re-allocation, providing robustness to task failures and model inaccuracies to achieve higher performance than offline approaches. We comprehensively evaluate the algorithms in a testbed with random missions and reward functions and compare them to a mixed-integer solver and a greedy heuristic. Additionally, we validate the overall approach in an advanced simulator, modeling reward functions based on realistic physical phenomena and executing the tasks with realistic robot dynamics. Results establish efficacy in modeling complex missions and efficiency in generating high-fidelity task plans while leveraging task relationships.

cs.RO↗

arXiv2025

Exploring environment exploitation for self-reconfiguration in modular robotics

Modular robotics research has long been preoccupied with perfecting the modules themselves -- their actuation methods, connectors, controls, communication, and fabrication. This inward focus results, in part, from the complexity of the task and largely confines modular robots to sterile laboratory settings. The latest generation of truss modular robots, such as the Variable Topology Truss and the Truss Link, have begun to focus outward and reveal a key insight: the environment is not just a backdrop; it is a tool. In this work, we shift the paradigm from building better robots to building better robot environment interactions for modular truss robots. We study how modular robots can effectively exploit their surroundings to achieve faster locomotion, adaptive self-reconfiguration, and complex three-dimensional assembly from simple two-dimensional robot assemblies. By using environment features -- ledges, gaps, and slopes -- we show how the environment can extend the robots' capabilities. Nature has long mastered this principle: organisms not only adapt, but exploit their environments to their advantage. Robots must learn to do the same. This study is a step towards modular robotic systems that transcend their limitations by exploiting environmental features.

cs.RO↗

arXiv2025

Real-time Two-tape Control System in Vine robots

This paper focuses on how to make a growing Vine robot steer in different directions with a novel approach to real-time steering control by autonomously applying adhesive tape to induce a surface wrinkles. This enabling real-time directional control with arbitrary many turns while maintaining the robot's soft structure. This system feeds growing material external to the tube. The design achieves fixed-angle turns in 2D space. Through experimental validation, we demonstrate repeated 21-degree turns using a Dubins path planner with minimal error, establishing a foundation for more versatile Vine robot applications. This approach combines real-time control, multi-degree-of-freedom steering, and structural flexibility, addressing key challenges in soft robotics.

cs.RO↗

arXiv2025

Active Learning Design: Modeling Force Output for Axisymmetric Soft Pneumatic Actuators

Soft pneumatic actuators (SPA) made from elastomeric materials can provide large strain and large force. The behavior of locally strain-restricted hyperelastic materials under inflation has been investigated thoroughly for shape reconfiguration, but requires further investigation for trajectories involving external force. In this work we model force-pressure-height relationships for a concentrically strain-limited class of soft pneumatic actuators and demonstrate the use of this model to design SPA response for object lifting. We predict relationships under different loadings by solving energy minimization equations and verify this theory by using an automated test rig to collect rich data for n=22 Ecoflex 00-30 membranes. We collect this data using an active learning pipeline to efficiently model the design space. We show that this learned material model outperforms the theory-based model and naive curve-fitting approaches. We use our model to optimize membrane design for different lift tasks and compare this performance to other designs. These contributions represent a step towards understanding the natural response for this class of actuator and embodying intelligent lifts in a single-pressure input actuator system.

cs.RO↗

arXiv2025

Microscopic Robots That Sense, Think, Act, and Compute

While miniaturization has been a goal in robotics for nearly 40 years, roboticists have struggled to access sub-millimeter dimensions without making sacrifices to on-board information processing due to the unique physics of the microscale. Consequently, microrobots often lack the key features that distinguish their macroscopic cousins from other machines, namely on-robot systems for decision making, sensing, feedback, and programmable computation. Here, we take up the challenge of building a microrobot comparable in size to a single-celled paramecium that can sense, think, and act using onboard systems for computation, sensing, memory, locomotion, and communication. Built massively in parallel with fully lithographic processing, these microrobots can execute digitally defined algorithms and autonomously change behavior in response to their surroundings. Combined, these results pave the way for general purpose microrobots that can be programmed many times in a simple setup, cost under $0.01 per machine, and work together to carry out tasks without supervision in uncertain environments.

cs.RO↗

arXiv2024

Learning In-Hand Translation Using Tactile Skin With Shear and Normal Force Sensing

Recent progress in reinforcement learning (RL) and tactile sensing has significantly advanced dexterous manipulation. However, these methods often utilize simplified tactile signals due to the gap between tactile simulation and the real world. We introduce a sensor model for tactile skin that enables zero-shot sim-to-real transfer of ternary shear and binary normal forces. Using this model, we develop an RL policy that leverages sliding contact for dexterous in-hand translation. We conduct extensive real-world experiments to assess how tactile sensing facilitates policy adaptation to various unseen object properties and robot hand orientations. We demonstrate that our 3-axis tactile policies consistently outperform baselines that use only shear forces, only normal forces, or only proprioception. Website: https://jessicayin.github.io/tactile-skin-rl/

cs.RO↗

arXiv2024

A Single Motor Nano Aerial Vehicle with Novel Peer-to-Peer Communication and Sensing Mechanism

Communication and position sensing are among the most important capabilities for swarm robots to interact with their peers and perform tasks collaboratively. However, the hardware required to facilitate communication and position sensing is often too complicated, expensive, and bulky to be carried on swarm robots. Here we present Maneuverable Piccolissimo 3 (MP3), a minimalist, single motor drone capable of executing inter-robot communication via infrared light and triangulation-based sensing of relative bearing, distance, and elevation using message arrival time. Thanks to its novel design, MP3 can communicate with peers and localize itself using simple components, keeping its size and mass small and making it inherently safe for human interaction. We present the hardware and software design of MP3 and demonstrate its capability to localize itself, fly stably, and maneuver in the environment using peer-to-peer communication and sensing.

cs.RO↗

arXiv2024

Continuous Sculpting: Persistent Swarm Shape Formation Adaptable to Local Environmental Changes

Despite their growing popularity, swarms of robots remain limited by the operating time of each individual. We present algorithms which allow a human to sculpt a swarm of robots into a shape that persists in space perpetually, independent of onboard energy constraints such as batteries. Robots generate a path through a shape such that robots cycle in and out of the shape. Robots inside the shape react to human initiated changes and adapt the path through the shape accordingly. Robots outside the shape recharge and return to the shape so that the shape can persist indefinitely. The presented algorithms communicate shape changes throughout the swarm using message passing and robot motion. These algorithms enable the swarm to persist through any arbitrary changes to the shape. We describe these algorithms in detail and present their performance in simulation and on a swarm of mobile robots. The result is a swarm behavior more suitable for extended duration, dynamic shape-based tasks in applications such as agriculture and emergency response.

cs.RO↗

arXiv2022

Holonomic Control of Arbitrary Configurations of Docked Modboats

The Modboat is a low-cost, underactuated, modular robot capable of surface swimming, docking to other modules, and undocking from them using only a single motor and two passive flippers. Undocking is achieved by causing intentional self-collision between the tails of neighboring modules in certain configurations; this becomes a challenge, however, when collective swimming as one connected component is desirable. Prior work has developed controllers that turn arbitrary configurations of docked Modboats into steerable vehicles, but they cannot counteract lateral forces and disturbances. In this work we present a centralized control strategy to create holonomic vehicles out of arbitrary configurations of docked Modboats using an iterative potential-field based search. We experimentally demonstrate that our controller performs well and can control surge and sway velocities and yaw angle simultaneously.

cs.RO↗

arXiv2022

Electroadhesive Clutches for Programmable Shape Morphing of Soft Actuators

Soft robotic actuators are safe and adaptable devices with inherent compliance, which makes them attractive for manipulating delicate and complex objects. Researchers have integrated stiff materials into soft actuators to increase their force capacity and direct their deformation. However, these embedded materials have largely been pre-prescribed and static, which constrains the actuators to a predetermined range of motion. In this work, electroadhesive (EA) clutches integrated on a single-chamber soft pneumatic actuator (SPA) provide local programmable stiffness modulation to control the actuator deformation. We show that activating different clutch patterns inflates a silicone membrane into pyramidal, round, and plateau shapes. Curvatures from these shapes are combined during actuation to apply forces on both a 3.7 g and 820 g object along five different degrees of freedom (DoF). The actuator workspace is up to 12 mm for light objects. Clutch deactivation, which results in local elastomeric expansion, rapidly applies forces up to 3.2 N to an object resting on the surface and launches a 3.7 g object in controlled directions. The actuator also rotates a heavier, 820 g, object by 5 degrees and rapidly restores it to horizontal alignment after clutch deactivation. This actuator is fully powered by a 5 V battery, AA battery, DC-DC transformer, and 4.5 V (63 g) DC air pump. These results demonstrate a first step towards realizing a soft actuator with high DoF shape change that preserves the inherent benefits of pneumatic actuation while gaining the electrical controllability and strength of EA clutches. We envision such a system supplying human contact forces in the form of a low-profile sit-to-stand assistance device, bed-ridden patient manipulator, or other ergonomic mechanism. This technology was also demonstrated at ICRA 2022: https://www.youtube.com/watch?v=6Y6-iHWNi6s

cs.RO↗

arXiv2022

Collective Control for Arbitrary Configurations of Docked Modboats

The Modboat is a low-cost, underactuated, modular robot capable of surface swimming, docking to other modules, and undocking from them using only a single motor and two passive flippers. Undocking is achieved by causing intentional self-collision between the tails of neighboring modules in certain configurations; this becomes a challenge, however, when collective swimming as one connected component is desirable. In this work, we develop a centralized control strategy to allow \textit{arbitrary} configurations of Modboats to swim as a single steerable vehicle and guarantee no accidental undocking. We also present a simplified model for hydrodynamic interactions between boats in a configuration that is tractable for real-time control. We experimentally demonstrate that our controller performs well, is consistent for configurations of various sizes and shapes, and can control both surge velocity and yaw angle simultaneously. Controllability is maintained while swimming, but pure yaw control causes lateral movement that cannot be counteracted by the presented framework.

cs.RO↗

arXiv2022

Multimodal Proximity and Visuotactile Sensing With a Selectively Transmissive Soft Membrane

The most common sensing modalities found in a robot perception system are vision and touch, which together can provide global and highly localized data for manipulation. However, these sensing modalities often fail to adequately capture the behavior of target objects during the critical moments as they transition out of static, controlled contact with an end-effector to dynamic and uncontrolled motion. In this work, we present a novel multimodal visuotactile sensor that provides simultaneous visuotactile and proximity depth data. The sensor integrates an RGB camera and air pressure sensor to sense touch with an infrared time-of-flight (ToF) camera to sense proximity by leveraging a selectively transmissive soft membrane to enable the dual sensing modalities. We present the mechanical design, fabrication techniques, algorithm implementations, and evaluation of the sensor's tactile and proximity modalities. The sensor is demonstrated in three open-loop robotic tasks: approaching and contacting an object, catching, and throwing. The fusion of tactile and proximity data could be used to capture key information about a target object's transition behavior for sensor-based control in dynamic manipulation.

cs.RO↗

arXiv2022

Amplitude Control for Parallel Lattices of Docked Modboats

The Modboat is a low-cost, underactuated, modular robot capable of surface swimming. It is able to swim individually, dock to other Modboats, and undock from them using only a single motor and two passive flippers. Undocking without additional actuation is achieved by causing intentional self-collision between the tails of neighboring modules; this becomes a challenge when group swimming as one connected component is desirable. In this work, we develop a control strategy to allow parallel lattices of Modboats to swim as a single unit, which conventionally requires holonomic modules. We show that the control strategy is guaranteed to avoid unintentional undocking and minimizes internal forces within the lattice. Experimental verification shows that the controller performs well and is consistent for lattices of various sizes. Controllability is maintained while swimming, but pure yaw control causes lateral movement that cannot be counteracted by the presented framework.

cs.RO↗

arXiv2022

A Low-Cost, Highly Customizable Solution for Position Estimation in Modular Robots

Accurate position sensing is important for state estimation and control in robotics. Reliable and accurate position sensors are usually expensive and difficult to customize. Incorporating them into systems that have very tight volume constraints such as modular robots are particularly difficult. PaintPots are low-cost, reliable, and highly customizable position sensors, but their performance is highly dependent on the manufacturing and calibration process. This paper presents a Kalman filter with a simplified observation model developed to deal with the non-linearity issues that result in the use of low-cost microcontrollers. In addition, a complete solution for the use of PaintPots in a variety of sensing modalities including manufacturing, characterization, and estimation is presented for an example modular robot, SMORES-EP. This solution can be easily adapted to a wide range of applications.

cs.RO↗

arXiv2021

Coverage Control in Multi-Robot Systems via Graph Neural Networks

This paper develops a decentralized approach to mobile sensor coverage by a multi-robot system. We consider a scenario where a team of robots with limited sensing range must position itself to effectively detect events of interest in a region characterized by areas of varying importance. Towards this end, we develop a decentralized control policy for the robots -- realized via a Graph Neural Network -- which uses inter-robot communication to leverage non-local information for control decisions. By explicitly sharing information between multi-hop neighbors, the decentralized controller achieves a higher quality of coverage when compared to classical approaches that do not communicate and leverage only local information available to each robot. Simulated experiments demonstrate the efficacy of multi-hop communication for multi-robot coverage and evaluate the scalability and transferability of the learning-based controllers.

cs.RO↗