arXiv subjects

Marko Lončar

Publications and source records attributed to Marko Lončar.

At least 55 records · Page 3Linked to original sources

arXiv2021

Femtosecond Pulse Generation via an Integrated Electro-Optic Time Lens

Integrated femtosecond pulse and frequency comb sources are critical components for a wide range of applications. The leading approaches for on-chip pulse generation rely on mode locking inside microresonator with either third-order nonlinearity or with semiconductor gain. These approaches, however, are limited in noise performance, wavelength tunability and repetition rates. Alternatively, sub-picosecond pulses can be synthesized without mode-locking, by modulating a continuous-wave (CW) single-frequency laser using a cascade of electro-optic (EO) modulators. This method is particularly attractive due to its simplicity, robustness, and frequency-agility but has been realized only on a tabletop using multiple discrete EO modulators and requiring optical amplifiers (to overcome large insertion losses), microwave amplifiers, and phase shifters. Here we demonstrate a chip-scale femtosecond pulse source implemented on an integrated lithium niobate (LN) photonic platform18, using cascaded low-loss electro-optic amplitude and phase modulators and chirped Bragg grating, forming a time-lens system. The device is driven by a CW distributed feedback (DFB) chip laser and controlled by a single CW microwave source without the need for any stabilization or locking. We measure femtosecond pulse trains (520 fs duration) with a 30-GHz repetition rate, flat-top optical spectra with a 10-dB optical bandwidth of 12.6 nm, individual comb-line powers above 0.1 milliwatt, and pulse energies of 0.54 picojoule. Our results represent a tunable, robust and low-cost integrated pulsed light source with CW-to-pulse conversion efficiencies an order of magnitude higher than achieved with previous integrated sources. Our pulse generator can find applications from ultrafast optical measurement to networks of distributed quantum computers.

physics.optics↗

arXiv2021

Telecommunication-wavelength two-dimensional photonic crystal cavities in a thin single-crystal diamond membrane

We demonstrate two-dimensional photonic crystal cavities operating at telecommunication wavelengths in a single-crystal diamond membrane. We use a high-optical-quality and thin (~ 300 nm) diamond membrane, supported by a polycrystalline diamond frame, to realize fully suspended two-dimensional photonic crystal cavities with a high theoretical quality factor of ~ $8\times10^6$ and a relatively small mode volume of ~2$(λ/n)^3$. The cavities are fabricated in the membrane using electron-beam lithography and vertical dry etching. We observe cavity resonances over a wide wavelength range spanning the telecommunication O- and S-bands (1360 nm-1470 nm) with Q factors of up to ~1800. Our method offers a new direction for on-chip diamond nanophotonic applications in the telecommunication-wavelength range.

physics.optics↗

arXiv2021

Roadmap on Integrated Quantum Photonics

Integrated photonics is at the heart of many classical technologies, from optical communications to biosensors, LIDAR, and data center fiber interconnects. There is strong evidence that these integrated technologies will play a key role in quantum systems as they grow from few-qubit prototypes to tens of thousands of qubits. The underlying laser and optical quantum technologies, with the required functionality and performance, can only be realized through the integration of these components onto quantum photonic integrated circuits (QPICs) with accompanying electronics. In the last decade, remarkable advances in quantum photonic integration and a dramatic reduction in optical losses have enabled benchtop experiments to be scaled down to prototype chips with improvements in efficiency, robustness, and key performance metrics. The reduction in size, weight, power, and improvement in stability that will be enabled by QPICs will play a key role in increasing the degree of complexity and scale in quantum demonstrations. In the next decade, with sustained research, development, and investment in the quantum photonic ecosystem (i.e. PIC-based platforms, devices and circuits, fabrication and integration processes, packaging, and testing and benchmarking), we will witness the transition from single- and few-function prototypes to the large-scale integration of multi-functional and reconfigurable QPICs that will define how information is processed, stored, transmitted, and utilized for quantum computing, communications, metrology, and sensing. This roadmap highlights the current progress in the field of integrated quantum photonics, future challenges, and advances in science and technology needed to meet these challenges.

quant-ph↗

arXiv2021

Optically-Heralded Entanglement of Superconducting Systems in Quantum Networks

Networking superconducting quantum computers is a longstanding challenge in quantum science. The typical approach has been to cascade transducers: converting to optical frequencies at the transmitter and to microwave frequencies at the receiver. However, the small microwave-optical coupling and added noise have proven formidable obstacles. Instead, we propose optical networking via heralding end-to-end entanglement with one detected photon and teleportation. In contrast to cascaded direct transduction, our scheme absorbs the low optical-microwave coupling efficiency into the heralding step, thus breaking the rate-fidelity trade-off. Moreover, this technique unifies and simplifies entanglement generation between superconducting devices and other physical modalities in quantum networks.

quant-ph↗

arXiv2021

Coherent coupling of mechanics to a single nuclear spin

Nuclear spins interact weakly with their environment. In particular, they are generally insensitive to mechanical vibrations. Here, we successfully demonstrate the coherent coupling of mechanics to a single nuclear spin. This coupling is mediated by a silicon vacancy (SiV) centre in diamond, taking advantage of its large strain susceptibility and hyperfine interaction with nuclear spins. Importantly, we demonstrate that the nuclear spin retains its excellent coherence properties even in the presence of this coupling. This provides a way to leverage nuclear spins as quantum memories for mechanical systems in the quantum regime.

quant-ph↗

arXiv2021

Coupling of a Single Tin-vacancy Center to a Photonic Crystal Cavity in Diamond

We demonstrate optical coupling between a single tin-vacancy (SnV) center in diamond and a free-standing photonic crystal nanobeam cavity. The cavities are fabricated using quasi-isotropic etching and feature experimentally measured quality factors as high as ~11,000. We investigate the dependence of a single SnV center's emission by controlling the cavity wavelength using a laser-induced gas desorption technique. Under resonance conditions, we observe an intensity enhancement of the SnV emission by a factor of 12 and a 16-fold reduction of the SnV lifetime. Based on the large enhancement of the SnV emission rate inside the cavity, we estimate the Purcell factor for the SnV zero-phonon line to be 37 and the coupling efficiency of the SnV center to the cavity, the beta factor, to be 95%. Our work paves the way for the realization of quantum photonic devices and systems based on efficient photonic interfaces using the SnV color center in diamond.

physics.optics↗

arXiv2021

Probing dark exciton navigation through a local strain landscape in a WSe$_2$ monolayer

Monolayers of transition metal dichalcogenides (TMDs) have recently emerged as a promising optoelectronic platform. To leverage their full potential, however, it is important to understand and engineer the properties of the different exciton species that exist in these monolayers, as well as to control their transport through the material. A promising approach relies on engineering strain landscapes in atomically thin semiconductors that excitons navigate. In WSe$_2$ monolayers, for example, localized strain has been used to control the emission wavelength of excitons, induce exciton funneling and conversion, and even realize single-photon sources and quantum dots. Before these phenomena can be fully leveraged for applications, including quantum information processing, the details of excitons' interaction with the strain landscape must be well understood. To address this, we have developed a cryogenic technique capable of probing the dynamics of both bright and dark excitons in nanoscale strain landscapes in TMDs. In our approach, a nanosculpted tapered optical fiber is used to simultaneously generate strain and probe the near-field optical response of WSe$_2$ monolayers at 5 K. When the monolayer is pushed by the fiber, its lowest energy photoluminescence (PL) peaks red shift by as much as 390 meV, (corresponding to 20% of the bandgap of an unstrained WSe$_2$ monolayer). The red-shifting peaks are polarized perpendicularly to the WSe$_2$ plane and have long rising times (10 ps) and lifetimes (52 ps), indicating that they originate from nominally spin-forbidden dark excitons. Taken together, these observations indicate that dark excitons are funneled to the high-strain regions during their long lifetime and are the principal participants in drift and diffusion at cryogenic temperatures. Our work elucidates the important role that dark excitons play in locally strained WSe$_2$.

cond-mat.mes-hall↗

arXiv2021

Integrated photonics on thin-film lithium niobate

Lithium niobate (LN), an outstanding and versatile material, has influenced our daily life for decades: from enabling high-speed optical communications that form the backbone of the Internet to realizing radio-frequency filtering used in our cell phones. This half-century-old material is currently embracing a revolution in thin-film LN integrated photonics. The success of manufacturing wafer-scale, high-quality, thin films of LN on insulator (LNOI), accompanied with breakthroughs in nanofabrication techniques, have made high-performance integrated nanophotonic components possible. With rapid development in the past few years, some of these thin-film LN devices, such as optical modulators and nonlinear wavelength converters, have already outperformed their legacy counterparts realized in bulk LN crystals. Furthermore, the nanophotonic integration enabled ultra-low-loss resonators in LN, which unlocked many novel applications such as optical frequency combs and quantum transducers. In this Review, we cover -- from basic principles to the state of the art -- the diverse aspects of integrated thin-film LN photonics, including the materials, basic passive components, and various active devices based on electro-optics, all-optical nonlinearities, and acousto-optics. We also identify challenges that this platform is currently facing and point out future opportunities. The field of integrated LNOI photonics is advancing rapidly and poised to make critical impacts on a broad range of applications in communication, signal processing, and quantum information.

physics.optics↗

arXiv2020

High-Q Lithium Niobate Microcavities and Their Applications

Lithium niobate (LN) is an excellent nonlinear optical and electro-optic material that has found many applications in classical nonlinear optics, optical fiber communications and quantum photonics. Here we review the recent development of thin-film LN technology that has allowed the miniaturization of LN photonic devices and microcavities with ultrahigh quality factors. We discuss the design principle of LN devices that makes use of the largest nonlinear coefficients, various device fabrication approaches and resulting device performances, and the current and potential applications of LN microcavities.

physics.app-ph↗

arXiv2020

Nonreciprocal Transmission of Microwave Acoustic Waves in Nonlinear Parity-Time Symmetric Resonators

Acoustic waves have emerged as versatile on-chip information carriers with applications ranging from microwave filters to transducers. Nonreciprocal devices are desirable for the control and routing of high-frequency phonons. This is challenging, however, due to the linear response of most acoustic systems. Here, we leverage the strong piezoelectricity of lithium niobate to demonstrate fully tunable gain, loss, and nonlinearity for surface acoustic waves using electric circuitry. This allows the construction of a nonlinear acoustic parity-time-symmetric system and enables nonreciprocal transmission. We achieve a nonreciprocity of 10 decibels for a 200-MHz acoustic wave at a low input power of 3 $μ$W and further demonstrate one-way circulation of acoustic waves by cascading nonreciprocal devices. Our work illustrates the potential of this piezoelectric platform for on-chip phononic processing and exploration of non-Hermitian physics.

physics.app-ph↗

arXiv2020

Cavity electro-optics in thin-film lithium niobate for efficient microwave-to-optical transduction

Linking superconducting quantum devices to optical fibers via microwave-optical quantum transducers may enable large scale quantum networks. For this application, transducers based on the Pockels electro-optic (EO) effect are promising for their direct conversion mechanism, high bandwidth, and potential for low-noise operation. However, previously demonstrated EO transducers require large optical pump power to overcome weak EO coupling and reach high efficiency. Here, we create an EO transducer in thin-film lithium niobate, leveraging the low optical loss and strong EO coupling in this platform. We demonstrate a transduction efficiency of up to $2.7\times10^{-5}$, and a pump-power normalized efficiency of $1.9\times10^{-6}/\mathrm{μW}$. The transduction efficiency can be improved by further reducing the microwave resonator's piezoelectric coupling to acoustic modes, increasing the optical resonator quality factor to previously demonstrated levels, and changing the electrode geometry for enhanced EO coupling. We expect that with further development, EO transducers in thin-film lithium niobate can achieve near-unity efficiency with low optical pump power.

quant-ph↗

arXiv2020

Confinement of long-lived interlayer excitons in WS$_2$/WSe$_2$ heterostructures

Interlayer excitons in layered materials constitute a novel platform to study many-body phenomena arising from long-range interactions between quantum particles. The ability to localise individual interlayer excitons in potential energy traps is a key step towards simulating Hubbard physics in artificial lattices. Here, we demonstrate spatial localisation of long-lived interlayer excitons in a strongly confining trap array using a WS$_{2}$/WSe$_{2}$ heterostructure on a nanopatterned substrate. We detect long-lived interlayer excitons with lifetime approaching 0.2 ms and show that their confinement results in a reduced lifetime in the microsecond range and stronger emission rate with sustained optical selection rules. The combination of a permanent dipole moment, spatial confinement and long lifetime places interlayer excitons in a regime that satisfies one of the requirements for observing long-range dynamics in an optically resolvable trap lattice.

cond-mat.mes-hall↗

arXiv2020

Magnetic Field Fingerprinting of Integrated Circuit Activity with a Quantum Diamond Microscope

Current density distributions in active integrated circuits (ICs) result in patterns of magnetic fields that contain structural and functional information about the IC. Magnetic fields pass through standard materials used by the semiconductor industry and provide a powerful means to fingerprint IC activity for security and failure analysis applications. Here, we demonstrate high spatial resolution, wide field-of-view, vector magnetic field imaging of static (DC) magnetic field emanations from an IC in different active states using a Quantum Diamond Microscope (QDM). The QDM employs a dense layer of fluorescent nitrogen-vacancy (NV) quantum defects near the surface of a transparent diamond substrate placed on the IC to image magnetic fields. We show that QDM imaging achieves simultaneous $\sim10$ $μ$m resolution of all three vector magnetic field components over the 3.7 mm $\times$ 3.7 mm field-of-view of the diamond. We study activity arising from spatially-dependent current flow in both intact and decapsulated field-programmable gate arrays (FPGAs); and find that QDM images can determine pre-programmed IC active states with high fidelity using machine-learning classification methods.

quant-ph↗

arXiv2020

On-chip self-referencing using integrated lithium niobate waveguides

The measurement and stabilization of the carrier-envelope offset frequency $f_{\textrm{CEO}}$ via self-referencing is paramount for optical frequency comb generation which has revolutionized precision frequency metrology, spectroscopy, and optical clocks. Over the past decade, the development of chip-scale platforms has enabled compact integrated waveguides for supercontinuum generation. However, there is a critical need for an on-chip self-referencing system that is adaptive to different pump wavelengths, requires low pulse energy, and does not require complicated processing. Here, we demonstrate efficient carrier-envelope offset frequency $f_{\textrm{CEO}}$ stabilization of a modelocked laser with only 107 pJ of pulse energy via self-referencing in an integrated lithium niobate waveguide. We realize an $f$-$2f$ interferometer through second-harmonic generation and subsequent supercontinuum generation in a single dispersion-engineered waveguide with a stabilization performance equivalent to a conventional off-chip module. The $f_{\textrm{CEO}}$ beatnote is measured over a pump wavelength range of 70 nm. We theoretically investigate our system using a single nonlinear envelope equation with contributions from both second- and third-order nonlinearities. Our modeling reveals rich ultrabroadband nonlinear dynamics and confirms that the initial second harmonic generation followed by supercontinuum generation with the remaining pump is responsible for the generation of a strong $f_{\textrm{CEO}}$ signal as compared to a traditional $f$-$2f$ interferometer. Our technology provides a highly-simplified system that is robust, low cost, and adaptable for precision metrology for use outside a research laboratory.

physics.optics↗

arXiv2020

An integrated lithium-niobate electro-optic platform for spectrally tailored dual-comb spectroscopy

A high-resolution broad-spectral-bandwidth spectrometer on a chip would create new opportunities for gas-phase molecular fingerprinting, especially in environmental sensing. A resolution high enough to observe transitions at atmospheric pressure and the simultaneous sensitive detection of multiple atoms or molecules are the key challenges. Here, an electro-optic microring-based dual-comb interferometer, fabricated on a low-loss lithium-niobate-on-insulator nanophotonic platform, demonstrates significant progress towards such an achievement. Spectra spanning 1.6 THz (53 cm-1) at a resolution of 10 GHz (0.33 cm-1) are obtained in a single measurement without requiring frequency scanning or moving parts. The frequency agility of the system enables spectrally-tailored multiplexed sensing, which allows for interrogation of non-adjacent spectral regions, here separated by 6.6 THz (220 cm-1), without compromising the signal-to-noise ratio.

physics.app-ph↗

arXiv2020

Development of Quantum InterConnects for Next-Generation Information Technologies

Just as classical information technology rests on a foundation built of interconnected information-processing systems, quantum information technology (QIT) must do the same. A critical component of such systems is the interconnect, a device or process that allows transfer of information between disparate physical media, for example, semiconductor electronics, individual atoms, light pulses in optical fiber, or microwave fields. While interconnects have been well engineered for decades in the realm of classical information technology, quantum interconnects (QuICs) present special challenges, as they must allow the transfer of fragile quantum states between different physical parts or degrees of freedom of the system. The diversity of QIT platforms (superconducting, atomic, solid-state color center, optical, etc.) that will form a quantum internet poses additional challenges. As quantum systems scale to larger size, the quantum interconnect bottleneck is imminent, and is emerging as a grand challenge for QIT. For these reasons, it is the position of the community represented by participants of the NSF workshop on Quantum Interconnects that accelerating QuIC research is crucial for sustained development of a national quantum science and technology program. Given the diversity of QIT platforms, materials used, applications, and infrastructure required, a convergent research program including partnership between academia, industry and national laboratories is required. This document is a summary from a U.S. National Science Foundation supported workshop held on 31 October - 1 November 2019 in Alexandria, VA. Attendees were charged to identify the scientific and community needs, opportunities, and significant challenges for quantum interconnects over the next 2-5 years.

quant-ph↗

arXiv2019

Electrically tunable valley dynamics in twisted WSe$_2$/WSe$_2$ bilayers

The twist degree of freedom provides a powerful new tool for engineering the electrical and optical properties of van der Waals heterostructures. Here, we show that the twist angle can be used to control the spin-valley properties of transition metal dichalcogenide bilayers by changing the momentum alignment of the valleys in the two layers. Specifically, we observe that the interlayer excitons in twisted WSe$_2$/WSe$_2$ bilayers exhibit a high (>60%) degree of circular polarization (DOCP) and long valley lifetimes (>40 ns) at zero electric and magnetic fields. The valley lifetime can be tuned by more than three orders of magnitude via electrostatic doping, enabling switching of the DOCP from ~80% in the n-doped regime to <5% in the p-doped regime. These results open up new avenues for tunable chiral light-matter interactions, enabling novel device schemes that exploit the valley degree of freedom.

cond-mat.mes-hall↗

arXiv2019

Coherent Acoustic Control of a Single Silicon Vacancy Spin in Diamond

Phonons are considered to be universal quantum transducers due to their ability to couple to a wide variety of quantum systems. Among these systems, solid-state point defect spins are known for being long-lived optically accessible quantum memories. Recently, it has been shown that inversion-symmetric defects in diamond, such as the negatively charged silicon vacancy center (SiV), feature spin qubits that are highly susceptible to strain. Here, we leverage this strain response to achieve coherent and low-power acoustic control of a single SiV spin, and perform acoustically driven Ramsey interferometry of a single spin. Our results demonstrate a novel and efficient method of spin control for these systems, offering a path towards strong spin-phonon coupling and phonon-mediated hybrid quantum systems.

quant-ph↗