arXiv subjects

Marko Lončar

Publications and source records attributed to Marko Lončar.

At least 73 records · Page 4Linked to original sources

arXiv2019

Ultrabroadband Nonlinear Optics in Nanophotonic Periodically Poled Lithium Niobate Waveguides

Quasi-phasematched interactions in waveguides with quadratic nonlinearities enable highly efficient nonlinear frequency conversion. In this article, we demonstrate the first generation of devices that combine the dispersion-engineering available in nanophotonic waveguides with quasi-phasematched nonlinear interactions available in periodically poled lithium niobate (PPLN). This combination enables quasi-static interactions of femtosecond pulses, reducing the pulse energy requirements by several orders of magnitude, from picojoules to femtojoules. We experimentally demonstrate two effects associated with second harmonic generation. First, we observe efficient quasi-phasematched second harmonic generation with <100 fJ of pulse energy. Second, in the limit of strong phase-mismatch, we observe spectral broadening of both harmonics with as little as 2-pJ of pulse energy. These results lay a foundation for a new class of nonlinear devices, in which co-engineering of dispersion with quasi-phasematching enables efficient nonlinear optics at the femtojoule level.

physics.optics↗

arXiv2019

Silicon photodetector for integrated lithium niobate photonics

We demonstrate integration of an amorphous silicon photodetector with thin film lithium niobate photonic platform operating in the visible wavelength range. We present the details of the design, fabrication, integration and experimental characterization of this metal-semiconductor-metal photodetector that features responsivity of 22 mA/W to 37mA/W over the wide optical bandwidth spanning 635 nm to 850 nm wavelengths range.

physics.app-ph↗

arXiv2019

Experimental demonstration of memory-enhanced quantum communication

The ability to communicate quantum information over long distances is of central importance in quantum science and engineering. For example, it enables secure quantum key distribution (QKD) relying on fundamental principles that prohibit the "cloning" of unknown quantum states. While QKD is being successfully deployed, its range is currently limited by photon losses and cannot be extended using straightforward measure-and-repeat strategies without compromising its unconditional security. Alternatively, quantum repeaters, which utilize intermediate quantum memory nodes and error correction techniques, can extend the range of quantum channels. However, their implementation remains an outstanding challenge, requiring a combination of efficient and high-fidelity quantum memories, gate operations, and measurements. Here we report the experimental realization of memory-enhanced quantum communication. We use a single solid-state spin memory integrated in a nanophotonic diamond resonator to implement asynchronous Bell-state measurements. This enables a four-fold increase in the secret key rate of measurement device independent (MDI)-QKD over the loss-equivalent direct-transmission method while operating megahertz clock rates. Our results represent a significant step towards practical quantum repeaters and large-scale quantum networks.

quant-ph↗

arXiv2019

Raman lasing and soliton modelocking in lithium-niobate microresonators

The recent advancement in lithium niobate on insulator (LNOI) technology is revolutionizing the optoelectronic industry as devices of higher performance, lower power consumption, and smaller footprint can be realized due to the high optical confinement in the structures. The LNOI platform offers both large \c{hi}(2) and \c{hi}(3) nonlinearities along with the power of dispersion engineering, enabling brand new nonlinear photonic devices and applications towards the next generation of integrated photonic circuits. However, the Raman scattering, one of the most important nonlinear phenomena, have not been extensively studied, neither was its influences in dispersion-engineered LNOI nano-devices. In this work, we characterize the Raman radiation spectra in a monolithic lithium niobate (LN) microresonator via selective excitation of Raman-active phonon modes. Remarkably, the dominant mode for Raman oscillation is observed in the backward direction for a continuous-wave pump threshold power of 20 mW with a reportedly highest differential quantum efficiency of 46 %. In addition, we explore the effects of Raman scattering on Kerr optical frequency combs generation. We achieve, for the first time, soliton modelocking on a X-cut LNOI chip through sufficient suppression of the Raman effect via cavity geometry control. Our analysis of the Raman effect provides guidance for the development of future chip-based photonic devices on the LNOI platform.

physics.optics↗

arXiv2019

Phononic band structure engineering for high-Q gigahertz surface acoustic wave resonators on lithium niobate

Phonons at gigahertz frequencies interact with electrons, photons, and atomic systems in solids, and therefore have extensive applications in signal processing, sensing, and quantum technologies. Surface acoustic wave (SAW) resonators that confine surface phonons can play a crucial role in such integrated phononic systems due to small mode size, low dissipation, and efficient electrical transduction. To date, it has been challenging to achieve high quality (Q) factor and small phonon mode size for SAW resonators at gigahertz frequencies. Here, we present a methodology to design compact high-Q SAW resonators on lithium niobate operating at gigahertz frequencies. We experimentally verify out designs and demonstrate Q factors in excess of $2\times10^4$ at room temperature ($6\times10^4$ at 4 Kelvin) and mode area as low as $1.87 λ^2$. This is achieved by phononic band structure engineering, which provides high confinement with low mechanical loss. The frequency-Q products (fQ) of our SAW resonators are greater than $10^{13}$. These high-fQ and small mode size SAW resonators could enable applications in quantum phononics and integrated hybrid systems with phonons, photons, and solid-state qubits.

cond-mat.mes-hall↗

arXiv2019

Quantum interference of electromechanically stabilized emitters in nanophotonic devices

Photon-mediated coupling between distant matter qubits may enable secure communication over long distances, the implementation of distributed quantum computing schemes, and the exploration of new regimes of many-body quantum dynamics. Nanophotonic devices coupled to solid-state quantum emitters represent a promising approach towards realization of these goals, as they combine strong light-matter interaction and high photon collection efficiencies. However, the scalability of these approaches is limited by the frequency mismatch between solid-state emitters and the instability of their optical transitions. Here we present a nano-electromechanical platform for stabilization and tuning of optical transitions of silicon-vacancy (SiV) color centers in diamond nanophotonic devices by dynamically controlling their strain environments. This strain-based tuning scheme has sufficient range and bandwidth to alleviate the spectral mismatch between individual SiV centers. Using strain, we ensure overlap between color center optical transitions and observe an entangled superradiant state by measuring correlations of photons collected from the diamond waveguide. This platform for tuning spectrally stable color centers in nanophotonic waveguides and resonators constitutes an important step towards a scalable quantum network.

physics.app-ph↗

arXiv2018

Integration of Quantum Emitters with Lithium Niobate Photonics

The integration of quantum emitters with integrated photonics enables complex quantum photonic circuits that are necessary for photonic implementation of quantum simulators, computers, and networks. Thin-film lithium niobate is an ideal material substrate for quantum photonics because it can tightly confine light in small waveguides and has a strong electro-optic effect that can switch and modulate single photons at low power and high speed. However, lithium niobite lacks efficient single-photon emitters, which are essential for scalable quantum photonic circuits. We demonstrate deterministic coupling of single-photon emitters with a lithium niobate photonic chip. The emitters are composed of InAs quantum dots embedded in an InP nanobeam, which we transfer to a lithium niobate waveguide with nanoscale accuracy using a pick-and place approach. An adiabatic taper transfers single photons emitted into the nanobeam to the lithium niobate waveguide with high efficiency. We verify the single photon nature of the emission using photon correlation measurements performed with an on-chip beamsplitter. Our results demonstrate an important step toward fast, reconfigurable quantum photonic circuits for quantum information processing.

quant-ph↗

arXiv2018

Photon-mediated interactions between quantum emitters in a diamond nanocavity

Photon-mediated interactions between quantum systems are essential for realizing quantum networks and scalable quantum information processing. We demonstrate such interactions between pairs of silicon-vacancy (SiV) color centers strongly coupled to a diamond nanophotonic cavity. When the optical transitions of the two color centers are tuned into resonance, the coupling to the common cavity mode results in a coherent interaction between them, leading to spectrally-resolved superradiant and subradiant states. We use the electronic spin degrees of freedom of the SiV centers to control these optically-mediated interactions. Our experiments pave the way for implementation of cavity-mediated quantum gates between spin qubits and for realization of scalable quantum network nodes.

quant-ph↗

arXiv2017

Mechanical and optical nanodevices in single-crystal quartz

Single-crystal α-quartz, one of the most widely used piezoelectric materials, has enabled a wide range of timing applications. Owing to the fact that integrated thin-film based quartz platform is not available, most of these applications rely on macroscopic, bulk crystal-based devices. Here we show that the Faraday cage angled-etching technique can be used to realize nanoscale electromechanical and photonic devices in quartz. Using this approach, we demonstrate quartz nanomechanical cantilevers and ring resonators featuring Qs of 4,900 and 8,900, respectively.

cond-mat.mes-hall↗

arXiv2017

Topology-optimized Dual-Polarization Dirac Cones

We apply a large-scale computational technique, known as topology optimization, to the inverse design of photonic Dirac cones. In particular, we report on a variety of photonic crystal geometries, realizable in simple isotropic dielectric materials, which exhibit dual-polarization and dual-wavelength Dirac cones. We demonstrate the flexibility of this technique by designing photonic crystals of different symmetry types, such as ones with four-fold and six-fold rotational symmetry, which possess Dirac cones at different points within the Brillouin zone. The demonstrated and related optimization techniques could open new avenues to band-structure engineering and manipulating the propagation of light in periodic media, with possible applications in exotic optical phenomena such as effective zero-index media and topological photonics.

physics.optics↗

arXiv2017

Topology Optimized Multi-layered Meta-optics

We propose a general topology optimization framework for metasurface inverse design that can automatically discover highly complex multi-layered meta-structures with increased functionalities. In particular, we present topology-optimized multi-layered geometries exhibiting angular phase control, including a single-piece nanophotonic metalens with angular aberration correction as well as an angle-convergent metalens that focuses light onto the same focal spot regardless of the angle of incidence.

physics.optics↗

arXiv2017

Quantum Nonlinear Optics with a Germanium-Vacancy Color Center in a Nanoscale Diamond Waveguide

We demonstrate a quantum nanophotonics platform based on germanium-vacancy (GeV) color centers in fiber-coupled diamond nanophotonic waveguides. We show that GeV optical transitions have a high quantum efficiency and are nearly lifetime-broadened in such nanophotonic structures. These properties yield an efficient interface between waveguide photons and a single GeV without the use of a cavity or slow-light waveguide. As a result, a single GeV center reduces waveguide transmission by $18 \pm 1\%$ on resonance in a single pass. We use a nanophotonic interferometer to perform homodyne detection of GeV resonance fluorescence. By probing the photon statistics of the output field, we demonstrate that the GeV-waveguide system is nonlinear at the single-photon level.

quant-ph↗

arXiv2017

A fiber-coupled diamond quantum nanophotonic interface

Color centers in diamond provide a promising platform for quantum optics in the solid state, with coherent optical transitions and long-lived electron and nuclear spins. Building upon recent demonstrations of nanophotonic waveguides and optical cavities in single-crystal diamond, we now demonstrate on-chip diamond nanophotonics with a high efficiency fiber-optical interface, achieving > 90% power coupling at visible wavelengths. We use this approach to demonstrate a bright source of narrowband single photons, based on a silicon-vacancy color center embedded within a waveguide-coupled diamond photonic crystal cavity. Our fiber-coupled diamond quantum nanophotonic interface results in a high flux of coherent single photons into a single mode fiber, enabling new possibilities for realizing quantum networks that interface multiple emitters, both on-chip and separated by long distances.

cond-mat.mes-hall↗

arXiv2017

Topology optimization of multi-track ring resonators and 2D microcavities for nonlinear frequency conversion

We exploit recently developed topology-optimization techniques to design complex, wavelength-scale resonators for enhancing various nonlinear $χ^{(2)}$ and $χ^{(3)}$ frequency conversion processes. In particular, we demonstrate aperiodic, multi-track ring resonators and 2D slab microcavities exhibiting long lifetimes $Q \gtrsim 10^4$, small modal volumes $V \gtrsim (λ/2n)^3$, and among the largest nonlinear overlaps (a generalization of phase matching in large-etalon waveguides) possible, paving the way for efficient, compact, and wide-bandwdith integrated nonlinear devices.

physics.optics↗

arXiv2017

Second harmonic generation in nano-structured thin-film lithium niobate waveguides

Integrated thin-film lithium niobate platform has recently emerged as a promising candidate for next-generation, high-efficiency wavelength conversion systems that allow dense packaging and mass-production. Here we demonstrate efficient, phase-matched second harmonic generation in lithographically-defined thin-film lithium niobate waveguides with sub-micron dimensions. Both modal phase matching in fixed-width waveguides and quasi-phase matching in periodically grooved waveguides are theoretically proposed and experimentally demonstrated. Our low-loss (~ 3.0 dB/cm) nanowaveguides possess normalized conversion efficiencies as high as 41% W-1cm-2.

physics.optics↗

arXiv2016

Monolithic CMOS-compatible zero-index metamaterials

Zero-index materials exhibit exotic optical properties that can be utilized for integrated-optics applications. However, practical implementation requires compatibility with complementary metallic-oxide-semiconductor (CMOS) technologies. We demonstrate a CMOS-compatible zero-index metamaterial consisting of a square array of air holes in a 220-nm-thick silicon-on-insulator (SOI) wafer. This design is achieved through a Dirac-cone dispersion. The metamaterial is entirely composed of silicon and offers compatibility through low-aspect-ratio structures that can be simply fabricated in a standard device layer. This platform enables mass adoption and exploration of zero-index-based photonic devices at low cost and high fidelity.

physics.optics↗

arXiv2016

Diamond optomechanical crystals

Cavity-optomechanical systems realized in single-crystal diamond are poised to benefit from its extraordinary material properties, including low mechanical dissipation and a wide optical transparency window. Diamond is also rich in optically active defects, such as the nitrogen-vacancy (NV) and silicon-vacancy (SiV) centers, which behave as atom-like systems in the solid state. Predictions and observations of coherent coupling of the NV electronic spin to phonons via lattice strain has motivated the development of diamond nanomechanical devices aimed at realization of hybrid quantum systems, in which phonons provide an interface with diamond spins. In this work, we demonstrate diamond optomechanical crystals (OMCs), a device platform to enable such applications, wherein the co-localization of ~ 200 THz photons and few to 10 GHz phonons in a quasi-periodic diamond nanostructure leads to coupling of an optical cavity field to a mechanical mode via radiation pressure. In contrast to other material systems, diamond OMCs operating in the resolved-sideband regime possess large intracavity photon capacity (> 10$^5$) and sufficient optomechanical coupling rates to reach a cooperativity of ~ 20 at room temperature, allowing for the observation of optomechanically induced transparency and the realization of large amplitude optomechanical self-oscillations.

cond-mat.mes-hall↗

arXiv2016

On-chip all-dielectric fabrication-tolerant zero-index metamaterials

Zero-index metamaterials (ZIMs) offer unprecedented ways to manipulate the flow of light, and are of interest for wide range of applications including optical cloaking, super-coupling, and unconventional phase-matching properties in nonlinear optics. Impedance-matched ZIMs can be obtained through a photonic Dirac-cone (PDC) dispersion induced by an accidental degeneracy of two linear bands - typically an electric monopole mode and a transverse magnetic dipole mode - at the center of the Brillouin zone. Consequently, PDC can only be achieved for a particular combination of geometric parameters of the metamaterial, and hence is sensitive to fabrication imperfections. These fabrication imperfections may limit the usefulness in practical applications. In this work we overcome this obstacle and demonstrate robust all-dielectric (AD) ZIM that supports PDC dispersion over wide parameter space. Our structure, consisting of an array of Si pillars on silica substrate, is fabricated in silicon-oninsulator (SOI) platform and operates at telecom wavelengths.

physics.optics↗