arXiv subjects

Markus Michael Rau

Publications and source records attributed to Markus Michael Rau.

31 records · Page 2Linked to original sources

arXiv2020

Estimating redshift distributions using Hierarchical Logistic Gaussian processes

This work uses hierarchical logistic Gaussian processes to infer true redshift distributions of samples of galaxies, through their cross-correlations with spatially overlapping spectroscopic samples. We demonstrate that this method can accurately estimate these redshift distributions in a fully Bayesian manner jointly with galaxy-dark matter bias models. We forecast how systematic biases in the redshift-dependent galaxy-dark matter bias model affect redshift inference. Using published galaxy-dark matter bias measurements from the Illustris simulation, we compare these systematic biases with the statistical error budget from a forecasted weak gravitational lensing measurement. If the redshift-dependent galaxy-dark matter bias model is mis-specified, redshift inference can be biased. This can propagate into relative biases in the weak lensing convergence power spectrum on the 10% - 30% level. We, therefore, showcase a methodology to detect these sources of error using Bayesian model selection techniques. Furthermore, we discuss the improvements that can be gained from incorporating prior information from Bayesian template fitting into the model, both in redshift prediction accuracy and in the detection of systematic modeling biases.

astro-ph.CO↗

arXiv2020

Dark Energy Survey Year 1 Results: Cosmological Constraints from Cluster Abundances and Weak Lensing

We perform a joint analysis of the counts and weak lensing signal of redMaPPer clusters selected from the Dark Energy Survey (DES) Year 1 dataset. Our analysis uses the same shear and source photometric redshifts estimates as were used in the DES combined probes analysis. Our analysis results in surprisingly low values for $S_8 =σ_8(Ω_{\rm m}/0.3)^{0.5}= 0.65\pm 0.04$, driven by a low matter density parameter, $Ω_{\rm m}=0.179^{+0.031}_{-0.038}$, with $σ_8-Ω_{\rm m}$ posteriors in $2.4σ$ tension with the DES Y1 3x2pt results, and in $5.6σ$ with the Planck CMB analysis. These results include the impact of post-unblinding changes to the analysis, which did not improve the level of consistency with other data sets compared to the results obtained at the unblinding. The fact that multiple cosmological probes (supernovae, baryon acoustic oscillations, cosmic shear, galaxy clustering and CMB anisotropies), and other galaxy cluster analyses all favor significantly higher matter densities suggests the presence of systematic errors in the data or an incomplete modeling of the relevant physics. Cross checks with X-ray and microwave data, as well as independent constraints on the observable--mass relation from SZ selected clusters, suggest that the discrepancy resides in our modeling of the weak lensing signal rather than the cluster abundance. Repeating our analysis using a higher richness threshold ($λ\ge 30$) significantly reduces the tension with other probes, and points to one or more richness-dependent effects not captured by our model.

astro-ph.CO↗

arXiv2019

Self-consistent redshift estimation using correlation functions without a spectroscopic reference sample

We present a new method to estimate redshift distributions and galaxy-dark matter bias parameters using correlation functions in a fully data driven and self-consistent manner. Unlike other machine learning, template, or correlation redshift methods, this approach does not require a reference sample with known redshifts. By measuring the projected cross- and auto- correlations of different galaxy sub-samples, e.g., as chosen by simple cells in color-magnitude space, we are able to estimate the galaxy-dark matter bias model parameters, and the shape of the redshift distributions of each sub-sample. This method fully marginalises over a flexible parameterisation of the redshift distribution and galaxy-dark matter bias parameters of sub-samples of galaxies, and thus provides a general Bayesian framework to incorporate redshift uncertainty into the cosmological analysis in a data-driven, consistent, and reproducible manner. This result is improved by an order of magnitude by including cross-correlations with the CMB and with galaxy-galaxy lensing. We showcase how this method could be applied to real galaxies. By using idealised data vectors, in which all galaxy-dark matter model parameters and redshift distributions are known, this method is demonstrated to recover unbiased estimates on important quantities, such as the offset $Δ_z$ between the mean of the true and estimated redshift distribution and the 68\% and 95\% and 99.5\% widths of the redshift distribution to an accuracy required by current and future surveys.

astro-ph.CO↗

arXiv2019

Calibrating Long Period Variables as Standard Candles with Machine Learning

Variable stars with well-calibrated period-luminosity relationships provide accurate distance measurements to nearby galaxies and are therefore a vital tool for cosmology and astrophysics. While these measurements typically rely on samples of Cepheid and RR-Lyrae stars, abundant populations of luminous variable stars with longer periods of $10 - 1000$ days remain largely unused. We apply machine learning to derive a mapping between lightcurve features of these variable stars and their magnitude to extend the traditional period-luminosity (PL) relation commonly used for Cepheid samples. Using photometric data for long period variable stars in the Large Magellanic cloud (LMC), we demonstrate that our predictions produce residual errors comparable to those obtained on the corresponding Cepheid population. We show that our model generalizes well to other samples by performing a blind test on photometric data from the Small Magellanic Cloud (SMC). Our predictions on the SMC again show small residual errors and biases, comparable to results that employ PL relations fitted on Cepheid samples. The residual biases are complementary between the long period variable and Cepheid fits, which provides exciting prospects to better control sources of systematic error in cosmological distance measurements. We finally show that the proposed methodology can be used to optimize samples of variable stars as standard candles independent of any prior variable star classification.

astro-ph.IM↗

arXiv2018

The imprint of X-ray photoevaporation of planet-forming discs on the orbital distribution of giant planets

High energy radiation from a planet host star can have strong influence on the final habitability of a system through several mechanisms. In this context we have constructed a catalogue containing the X-ray luminosities, as well as basic stellar and planetary properties of all known stars hosting giant planets (> 0.1 Mjup) that have been observed by the Chandra X-ray Observatory, XMM-Newton and/or ROSAT. Specifically in this paper we present a first application of this catalogue to search for a possible imprint of X-ray photoevaporation of planet-forming discs on the present-day orbital distribution of the observed giant planets. We found a suggestive void in the semi-major axis, a, versus X-ray luminosity, Lx, plane, roughly located between a ~ 0.05-1 au and Lx ~10^27-10^29 erg/s, which would be expected if photoevaporation played a dominant role in the migration history of these systems. However, due to the small observational sample size, the statistical significance of this feature cannot be proven at this point.

astro-ph.EP↗

arXiv2018

The Reionization Parameter Space Consistent with the Thomson Optical Depth from Planck

We study the reionization parameter space consistent with the current measurement of the Thomson optical depth using a new parametrization of the reionization history. The mass-weighted ionization fraction is specified in terms of the redshift midpoint, duration, and asymmetry shape parameters. We perform an MCMC analysis using conservative flat priors and physical constraints. Our analysis yields a redshift midpoint of $z_{50}=7.66\substack{+0.57-0.61}\text{(68%)}\substack{+1.26-1.02}\text{(95%)}$, and upper limits on the duration $Δ_\text{z} < 7.5$ and asymmetry $A_\text{z}<5.3$ for $τ= 0.054 \pm 0.007$. The reconstructed mass-weighted ionization fraction $x_\text{i}(z)$ is asymmetric, but early contributions to reionization are minor.

astro-ph.CO↗

arXiv2017

Correcting cosmological parameter biases for all redshift surveys induced by estimating and reweighting redshift distributions

Photometric redshift uncertainties are a major source of systematic error for ongoing and future photometric surveys. We study different sources of redshift error caused by choosing a suboptimal redshift histogram bin width and propose methods to resolve them. The selection of a too large bin width is shown to oversmooth small scale structure of the radial distribution of galaxies. This systematic error can significantly shift cosmological parameter constraints by up to $6 \, σ$ for the dark energy equation of state parameter $w$. Careful selection of bin width can reduce this systematic by a factor of up to 6 as compared with commonly used current binning approaches. We further discuss a generalised resampling method that can correct systematic and statistical errors in cosmological parameter constraints caused by uncertainties in the redshift distribution. This can be achieved without any prior assumptions about the shape of the distribution or the form of the redshift error. Our methodology allows photometric surveys to obtain unbiased cosmological parameter constraints using a minimum number of spectroscopic calibration data. For a DES-like galaxy clustering forecast we obtain unbiased results with respect to errors caused by suboptimal histogram bin width selection, using only 5k representative spectroscopic calibration objects per tomographic redshift bin.

astro-ph.CO↗

arXiv2016

Stacking for machine learning redshifts applied to SDSS galaxies

We present an analysis of a general machine learning technique called 'stacking' for the estimation of photometric redshifts. Stacking techniques can feed the photometric redshift estimate, as output by a base algorithm, back into the same algorithm as an additional input feature in a subsequent learning round. We shown how all tested base algorithms benefit from at least one additional stacking round (or layer). To demonstrate the benefit of stacking, we apply the method to both unsupervised machine learning techniques based on self-organising maps (SOMs), and supervised machine learning methods based on decision trees. We explore a range of stacking architectures, such as the number of layers and the number of base learners per layer. Finally we explore the effectiveness of stacking even when using a successful algorithm such as AdaBoost. We observe a significant improvement of between 1.9% and 21% on all computed metrics when stacking is applied to weak learners (such as SOMs and decision trees). When applied to strong learning algorithms (such as AdaBoost) the ratio of improvement shrinks, but still remains positive and is between 0.4% and 2.5% for the explored metrics and comes at almost no additional computational cost.

astro-ph.IM↗

arXiv2016

Anomaly detection for machine learning redshifts applied to SDSS galaxies

We present an analysis of anomaly detection for machine learning redshift estimation. Anomaly detection allows the removal of poor training examples, which can adversely influence redshift estimates. Anomalous training examples may be photometric galaxies with incorrect spectroscopic redshifts, or galaxies with one or more poorly measured photometric quantity. We select 2.5 million 'clean' SDSS DR12 galaxies with reliable spectroscopic redshifts, and 6730 'anomalous' galaxies with spectroscopic redshift measurements which are flagged as unreliable. We contaminate the clean base galaxy sample with galaxies with unreliable redshifts and attempt to recover the contaminating galaxies using the Elliptical Envelope technique. We then train four machine learning architectures for redshift analysis on both the contaminated sample and on the preprocessed 'anomaly-removed' sample and measure redshift statistics on a clean validation sample generated without any preprocessing. We find an improvement on all measured statistics of up to 80% when training on the anomaly removed sample as compared with training on the contaminated sample for each of the machine learning routines explored. We further describe a method to estimate the contamination fraction of a base data sample.

astro-ph.CO↗

arXiv2016

Tuning target selection algorithms to improve galaxy redshift estimates

We showcase machine learning (ML) inspired target selection algorithms to determine which of all potential targets should be selected first for spectroscopic follow up. Efficient target selection can improve the ML redshift uncertainties as calculated on an independent sample, while requiring less targets to be observed. We compare the ML targeting algorithms with the Sloan Digital Sky Survey (SDSS) target order, and with a random targeting algorithm. The ML inspired algorithms are constructed iteratively by estimating which of the remaining target galaxies will be most difficult for the machine learning methods to accurately estimate redshifts using the previously observed data. This is performed by predicting the expected redshift error and redshift offset (or bias) of all of the remaining target galaxies. We find that the predicted values of bias and error are accurate to better than 10-30% of the true values, even with only limited training sample sizes. We construct a hypothetical follow-up survey and find that some of the ML targeting algorithms are able to obtain the same redshift predictive power with 2-3 times less observing time, as compared to that of the SDSS, or random, target selection algorithms. The reduction in the required follow up resources could allow for a change to the follow-up strategy, for example by obtaining deeper spectroscopy, which could improve ML redshift estimates for deeper test data.

astro-ph.IM↗

arXiv2015

Accurate photometric redshift probability density estimation - method comparison and application

We introduce an ordinal classification algorithm for photometric redshift estimation, which significantly improves the reconstruction of photometric redshift probability density functions (PDFs) for individual galaxies and galaxy samples. As a use case we apply our method to CFHTLS galaxies. The ordinal classification algorithm treats distinct redshift bins as ordered values, which improves the quality of photometric redshift PDFs, compared with non-ordinal classification architectures. We also propose a new single value point estimate of the galaxy redshift, that can be used to estimate the full redshift PDF of a galaxy sample. This method is competitive in terms of accuracy with contemporary algorithms, which stack the full redshift PDFs of all galaxies in the sample, but requires orders of magnitudes less storage space. The methods described in this paper greatly improve the log-likelihood of individual object redshift PDFs, when compared with a popular Neural Network code (ANNz). In our use case, this improvement reaches 50\% for high redshift objects ($z \geq 0.75$). We show that using these more accurate photometric redshift PDFs will lead to a reduction in the systematic biases by up to a factor of four, when compared with less accurate PDFs obtained from commonly used methods. The cosmological analyses we examine and find improvement upon are the following: gravitational lensing cluster mass estimates, modelling of angular correlation functions, and modelling of cosmic shear correlation functions.

astro-ph.CO↗

arXiv2015

Data augmentation for machine learning redshifts applied to SDSS galaxies

We present analyses of data augmentation for machine learning redshift estimation. Data augmentation makes a training sample more closely resemble a test sample, if the two base samples differ, in order to improve measured statistics of the test sample. We perform two sets of analyses by selecting 800k (1.7M) SDSS DR8 (DR10) galaxies with spectroscopic redshifts. We construct a base training set by imposing an artificial r band apparent magnitude cut to select only bright galaxies and then augment this base training set by using simulations and by applying the K-correct package to artificially place training set galaxies at a higher redshift. We obtain redshift estimates for the remaining faint galaxy sample, which are not used during training. We find that data augmentation reduces the error on the recovered redshifts by 40% in both sets of analyses, when compared to the difference in error between the ideal case and the non augmented case. The outlier fraction is also reduced by at least 10% and up to 80% using data augmentation. We finally quantify how the recovered redshifts degrade as one probes to deeper magnitudes past the artificial magnitude limit of the bright training sample. We find that at all apparent magnitudes explored, the use of data augmentation with tree based methods provide a estimate of the galaxy redshift with a negligible bias, although the error on the recovered values increases as we probe to deeper magnitudes. These results have applications for surveys which have a spectroscopic training set which forms a biased sample of all photometric galaxies, for example if the spectroscopic detection magnitude limit is shallower than the photometric limit.

astro-ph.CO↗

arXiv2015

Feature importance for machine learning redshifts applied to SDSS galaxies

We present an analysis of importance feature selection applied to photometric redshift estimation using the machine learning architecture Decision Trees with the ensemble learning routine Adaboost (hereafter RDF). We select a list of 85 easily measured (or derived) photometric quantities (or `features') and spectroscopic redshifts for almost two million galaxies from the Sloan Digital Sky Survey Data Release 10. After identifying which features have the most predictive power, we use standard artificial Neural Networks (aNN) to show that the addition of these features, in combination with the standard magnitudes and colours, improves the machine learning redshift estimate by 18% and decreases the catastrophic outlier rate by 32%. We further compare the redshift estimate using RDF with those from two different aNNs, and with photometric redshifts available from the SDSS. We find that the RDF requires orders of magnitude less computation time than the aNNs to obtain a machine learning redshift while reducing both the catastrophic outlier rate by up to 43%, and the redshift error by up to 25%. When compared to the SDSS photometric redshifts, the RDF machine learning redshifts both decreases the standard deviation of residuals scaled by 1/(1+z) by 36% from 0.066 to 0.041, and decreases the fraction of catastrophic outliers by 57% from 2.32% to 0.99%.

astro-ph.IM↗