arXiv subjects

Marti Checa

Publications and source records attributed to Marti Checa.

12 recordsLinked to original sources

arXiv2026

Dynamics of Null and Electrostatic Blind Spots for Quantitative PFM

Piezoresponse force microscopy is a cornerstone technique for probing nanoscale electromechanical phenomena, yet quantitative and in some cases qualitative interpretation remains hindered by parasitic electrostatic forces coupled through cantilever dynamics. Recent approaches aim to suppress these artifacts by operating at resonance defined null spots or electrostatic blind spots, but whether these conditions are equivalent and how they evolve under realistic measurement conditions has remained unclear. Here, combining analytical beam models, geometrically faithful finite-element simulations, and automated interferometric measurements, we show that NS and ESBS are fundamentally different operating conditions. The NS is a modal zero at contact resonance where sensitivity to all excitations vanishes, whereas the ESBS is a quasistatic position where only the distributed electrostatic response is suppressed. Automated measurements reveal that both conditions evolve with the tip sample boundary condition yet remain spatially separated under realistic experimental conditions. While beam models capture the dominant cantilever mechanics, finite-element simulations and experiment show that quantitative prediction of near tip behavior requires realistic three dimensional probe electrostatics and mechanics. These findings establish NS and ESBS as dynamic operating conditions and provide a practical framework for advancing interferometric PFM toward truly quantitative electromechanical metrology.

cond-mat.mtrl-sci↗

arXiv2026

AEcroscopyWave: Towards Self-Driving Characterization Platforms for Agentic AI

The characterization of electronic materials has traditionally been stratified into two distinct regimens: industry-scale automated systems to inspect materials for defects and ensure quality (such as in the semiconductor industry), and highly customized, operator-driven systems requiring human experts. The former offers high throughput but limited flexibility, whereas the latter is heavily bandwidth-limited but provides research-grade discovery capabilities. Recent advances in "self-driving" characterization tools offer the potential to bridge the two stratified regimes, by the creation of application program interfaces (APIs) that can control hardware, and the integration of AI methods to incorporate autonomy into the process. Here, we discuss our latest developments in AEcroscopyWave, a custom-built characterization platform for the agentic-AI era, that provides unified control of scanning probe microscopes with programmable peripheral instrumentation, highlighting the design choices that are necessary for maximizing the capability of the system and the ease of use for both human and AI agents. The benefits of making heterogeneous scientific instruments accessible, composable and usable by agents is demonstrated by test cases.

cond-mat.mtrl-sci↗

arXiv2026

Topological textures and emergent altermagnetic signatures in ultrathin BiFeO3

Magnetoelectric multiferroics, materials with intrinsically coupled electric polarization and magnetic order, promise ultralow-power switching, nonvolatile memory, and energy-efficient signal transduction. Yet practical deployment demands ultrathin films down to the atomic limit, where both orders typically degrade. Maintaining both order parameters at the thinnest scales in complex oxides remains a tremendous challenge, as uncompensated bound charge drives nanoscale depolarization in most ferroelectrics, while off-stoichiometry, reduced anisotropy, and charge transfer can produce magnetic dead layers in ultrathin oxides at substrate interfaces. Here, we realize a multiferroic phase of BiFeO3 that not only sustains both order parameters at room temperature with no dead layer but also exhibits signatures of emergent altermagnetism in the four-unit-cell, ultrathin limit. First-principles calculations, spin symmetry analysis, atomic-resolution imaging, and angle-resolved magnetic imaging reveal that short-circuit electrostatic boundary conditions, together with epitaxial strain, drive a continuous second-order, thickness-driven phase transition that enables the formation of multiferroic topological textures. Moreover, the imposed boundary conditions stabilize a d-wave altermagnetic time-reversal symmetry breaking, with corresponding signatures observed in magnetic circular dichroism. Collectively, these results establish a pathway to stabilize unconventional multiferroicity at device-relevant thicknesses, reframing scaling limits for oxide electronics.

cond-mat.mtrl-sci↗

arXiv2025

Auto-3DPFM: Automating Polarization-Vector Mapping at the Nanoscale

The functional properties of ferroelectric materials are strongly influenced by ferroelectric polarization orientation; as such, access to consistent and precise characterization of polarization vectors is of substantial importance to ferroelectrics research. Here, we develop a fully automated three-dimensional piezoresponse force microscopy (Auto-3DPFM) technique automating all essential steps in interferometric PFM for 3D polarization vector characterization, including laser alignment, tip calibration and approach, image acquisition, polarization vector reconstruction, and visualization. The automation reduces the experimental burden of ferroelectric polarization vector characterization, while the back-and-forth calibration ensures consistency and reproducibility of 3D polarization reconstruction. An algorithmic workflow is also developed to identify domain walls and calculate their characteristic angles via a spatial vector-angle-difference method, presenting one unique capability enabled by Auto-3DPFM that is not accessible with traditional PFM techniques. Beyond representing a significant step forward in 3D polarization mapping, Auto-3DPFM promises to accelerate discovery via high-throughput and autonomous characterization in ferroelectric materials research. When integrated with machine learning and adaptive sampling strategies in self-driving labs, Auto-3DPFM will serve as a valuable tool for advancing ferroelectric physics and microelectronics development.

cond-mat.mtrl-sci↗

arXiv2025

A Fourier-Based Global Denoising Model for Smart Artifacts Removing of Microscopy Images

Microscopy such as Scanning Tunneling Microscopy (STM), Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM) are essential tools in material imaging at micro- and nanoscale resolutions to extract physical knowledge and materials structure-property relationships. However, tuning microscopy controls (e.g. scanning speed, current setpoint, tip bias etc.) to obtain a high-quality of images is a non-trivial and time-consuming effort. On the other hand, with sub-standard images, the key features are not accurately discovered due to noise and artifacts, leading to erroneous analysis. Existing denoising models mostly build on generalizing the weak signals as noises while the strong signals are enhanced as key features, which is not always the case in microscopy images, thus can completely erase a significant amount of hidden physical information. To address these limitations, we propose a global denoising model (GDM) to smartly remove artifacts of microscopy images while preserving weaker but physically important features. The proposed model is developed based on 1) first designing a two-imaging input channel of non-pair and goal specific pre-processed images with user-defined trade-off information between two channels and 2) then integrating a loss function of pixel- and fast Fourier-transformed (FFT) based on training the U-net model. We compared the proposed GDM with the non-FFT denoising model over STM-generated images of Copper(Cu) and Silicon(Si) materials, AFM-generated Pantoea sp.YR343 bio-film images and SEM-generated plastic degradation images. We believe this proposed workflow can be extended to improve other microscopy image quality and will benefit the experimentalists with the proposed design flexibility to smartly tune via domain-experts preferences.

eess.IV↗

arXiv2025

Ferroelastic Domain Induced Electronic Modulation in Halide Perovskites

Lead halide perovskites have emerged as promising materials for optoelectronic applications due to their exceptional properties. In the all-inorganic CsPbBr3 perovskites, ferroelastic domains formed during phase transitions enhance bulk transport and emissive efficiency. However, the microscopic mechanisms governing carrier dynamics remain poorly understood. In this study, we employ cathodoluminescence (CL) and micro-Raman spectroscopy to image and investigate the electronic properties of the ferroelastic domain walls in CsPbBr3 single crystals. CL measurements reveal a reduced emissive yield and a slight redshift in emission at the domain walls. Further, micro-Raman studies provide spatially resolved mapping of vibrational modes, exhibiting second-order phonon modes localized at the domain boundaries. Our findings suggest that electron-phonon coupling at twin domain walls plays a critical role in facilitating efficient charge separation, thereby improving the optoelectronic performance of the CsPbBr3 perovskites.

cond-mat.mtrl-sci↗

arXiv2025

Defect Engineering in Large-Scale CVD-Grown Hexagonal Boron Nitride: Formation, Spectroscopy, and Spin Relaxation Dynamics

Recently, numerous techniques have been reported for generating optically active defects in exfoliated hexagonal boron nitride (hBN), which hold transformative potential for quantum photonic devices. However, achieving on-demand generation of desirable defect types in scalable hBN films remains a significant challenge. Here, we demonstrate that formation of negative boron vacancy defects, VB-, in suspended, large-area CVD-grown hBN is strongly dependent on the type of bombarding particles (ions, neutrons, and electrons) and irradiation conditions. In contrast to suspended hBN, defect formation in substrate-supported hBN is more complex due to the uncontrollable generation of secondary particles from the substrate, and the outcome strongly depends on the thickness of the hBN. We identify different defect types by correlating spectroscopic and optically detected magnetic resonance features, distinguishing boron vacancies (formed by light ions and neutrons) from other optically active defects emitting at 650 nm assigned to anti-site nitrogen vacancy (NBVN) and reveal the presence of additional dark paramagnetic defects that influence spin-lattice relaxation time (T1) and zero-field splitting parameters, all of which strongly depend on the defect density. These results underscore the potential for precisely engineered defect formation in large-scale CVD-grown hBN, paving the way for the scalable fabrication of quantum photonic devices.

cond-mat.mtrl-sci↗

arXiv2025

A Bi-channel Aided Stitching of Atomic Force Microscopy Images

Microscopy is an essential tool in scientific research, enabling the visualization of structures at micro- and nanoscale resolutions. However, the field of microscopy often encounters limitations in field-of-view (FOV), restricting the amount of sample that can be imaged in a single capture. To overcome this limitation, image stitching techniques have been developed to seamlessly merge multiple overlapping images into a single, high-resolution composite. The images collected from microscope need to be optimally stitched before accurate physical information can be extracted from post analysis. However, the existing stitching tools either struggle to stitch images together when the microscopy images are feature sparse or cannot address all the transformations of images. To address these issues, we propose a bi-channel aided feature-based image stitching method and demonstrate its use on AFM generated biofilm images. The topographical channel image of AFM data captures the morphological details of the sample, and a stitched topographical image is desired for researchers. We utilize the amplitude channel of AFM data to maximize the matching features and to estimate the position of the original topographical images and show that the proposed bi-channel aided stitching method outperforms the traditional stitching approach. Furthermore, we found that the differentiation of the topographical images along the x-axis provides similar feature information to the amplitude channel image, which generalizes our approach when the amplitude images are not available. Here we demonstrated the application on AFM, but similar approaches could be employed of optical microscopy with brightfield and fluorescence channels. We believe this proposed workflow will benefit the experimentalist to avoid erroneous analysis and discovery due to incorrect stitching.

eess.IV↗

arXiv2024

Hierarchical domain structures in buckled ferroelectric free sheets

Flat elastic sheets tend to display wrinkles and folds. From pieces of clothing down to two-dimensional crystals, these corrugations appear in response to strain generated by sheet compression or stretching, thermal or mechanical mismatch with other elastic layers, or surface tension. Extensively studied in metals, polymers and, more recently, in van der Waals exfoliated layers, with the advent of thin single crystal freestanding films of complex oxides, researchers are now paying attention to novel microstructural effects induced by bending ferroelectric-ferroelastics, where polarization is strongly coupled to lattice deformation. Here we show that wrinkle undulations in BaTiO3 sheets bonded to a viscoelastic substrate transform into a buckle delamination geometry when transferred onto a rigid substrate. Using spatially resolved techniques at different scales (Raman, scanning probe and electron microscopy), we show how these delaminations in the free BaTiO3 sheets display a self-organization of ferroelastic domains along the buckle profile that strongly differs from the more studied sinusoidal wrinkle geometry. Moreover, we disclose the hierarchical distribution of a secondary set of domains induced by the misalignment of these folding structures from the preferred in-plane crystallographic orientations. Our results disclose the relevance of the morphology and orientation of buckling instabilities in ferroelectric free sheets, for the stabilization of different domain structures, pointing to new routes for domain engineering of ferroelectrics in flexible oxide sheets.

cond-mat.mtrl-sci↗

arXiv2024

Evolution of ferroelectric properties in SmxBi1-xFeO3 via automated Piezoresponse Force Microscopy across combinatorial spread libraries

Combinatorial spread libraries offer a unique approach to explore evolution of materials properties over the broad concentration, temperature, and growth parameter spaces. However, the traditional limitation of this approach is the requirement for the read-out of functional properties across the library. Here we demonstrate the application of automated Piezoresponse Force Microscopy (PFM) for the exploration of the physics in the SmxBi1-xFeO3 system with the ferroelectric-antiferroelectric morphotropic phase boundary. This approach relies on the synergy of the quantitative nature of PFM and the implementation of automated experiments that allows PFM-based gird sampling over macroscopic samples. The concentration dependence of pertinent ferroelectric parameters has been determined and used to develop the mathematical framework based on Ginzburg-Landau theory describing the evolution of these properties across the concentration space. We pose that combination of automated scanning probe microscope and combinatorial spread library approach will emerge as an efficient research paradigm to close the characterization gap in the high-throughput materials discovery. We make the data sets open to the community and hope that will stimulate other efforts to interpret and understand the physics of these systems.

cond-mat.mtrl-sci↗

arXiv2024

Synergizing Human Expertise and AI Efficiency with Language Model for Microscopy Operation and Automated Experiment Design

With the advent of large language models (LLMs), in both the open source and proprietary domains, attention is turning to how to exploit such artificial intelligence (AI) systems in assisting complex scientific tasks, such as material synthesis, characterization, analysis and discovery. Here, we explore the utility of LLM, particularly ChatGPT4, in combination with application program interfaces (APIs) in tasks of experimental design, programming workflows, and data analysis in scanning probe microscopy, using both in-house developed API and API given by a commercial vendor for instrument control. We find that the LLM can be especially useful in converting ideations of experimental workflows to executable code on microscope APIs. Beyond code generation, we find that the GPT4 is capable of analyzing microscopy images in a generic sense. At the same time, we find that GPT4 suffers from inability to extend beyond basic analyses or more in-depth technical experimental design. We argue that a LLM specifically fine-tuned for individual scientific domains can potentially be a better language interface for converting scientific ideations from human experts to executable workflows, such a synergy between human expertise and LLM efficiency in experimentation can open new door for accelerating scientific research, enabling effective experimental protocols archive and sharing in scientific community.

cs.HC↗

arXiv2023

AEcroscoPy: A software-hardware framework empowering microscopy toward automated and autonomous experimentation

Microscopy, in particular scanning probe and electron microscopy, has been pivotal in improving our understanding of structure-function relationships at the nanoscale and is by now ubiquitous in most research characterization labs and facilities. However, traditional microscopy operations are still limited largely by a human-centric click-and-go paradigm utilizing vendor-provided software, which necessarily limits the scope, utility, efficiency, effectiveness, and at times reproducibility of microscopy experiments. Here, we develop a coupled hardware-software platform that consists of a field-programmable gate array (FPGA) device, with LabView-built customized acquisition scripts, along with a software package termed AEcroscoPy (short for Automated Experiments in Microscopy driven by Python) that overcome these limitations and provide the necessary abstractions towards full automation of microscopy platforms. The platform works across multiple vendor devices on scanning probe microscopes and scanning transmission electron microscopes. It enables customized scan trajectories, processing functions that can be triggered locally or remotely on processing servers, user-defined excitation waveforms, standardization of data models, and completely seamless operation through simple Python commands to enable a plethora of microscopy experiments to be performed in a reproducible, automated manner. This platform can be readily coupled with existing machine learning libraries as well as simulations, to provide automated decision-making and active theory-experiment optimization loops to turn microscopes from characterization tools to instruments capable of autonomous model refinement and physics discovery.

cond-mat.mtrl-sci↗