arXiv subjects

Marwa Chafii

Publications and source records attributed to Marwa Chafii.

At least 55 records · Page 3Linked to original sources

arXiv2024

Low Dynamic Range for RIS-aided Bistatic Integrated Sensing and Communication

The following paper presents a reconfigurable intelligent surface (RIS)-aided integrated sensing and communication (ISAC) system model scenario, where a base station communicates with a user, and a bi-static sensing unit, i.e. the passive radar (PR), senses targets using downlink signals. Given that the RIS aids with communication and sensing tasks, this paper introduces new interfering paths that can overwhelm the PR with unnecessarily high power, namely the path interference (PI), \textit{which is itself a combination of two interfering paths, the direct path interference (DPI) and the reflected path interference (RPI)}. For this, we formulate an optimization framework that allows the system to carry on with its ISAC tasks, through analog space-time beamforming at the sensing unit, in collaboration with RIS phase shift and statistical transmit covariance matrix optimization, while minimizing the PI power. As the proposed optimization problem is non-convex, we tailor a block-cyclic coordinate descent (BCCD) method to decouple the non-convex sub-problem from the convex one. A Riemannian conjugate gradient method is devised to generate the RIS and PR space-time beamforming phase shifts per BCCD iteration, while the convex sub-problem is solved via off-the-shelf solvers. Simulation results demonstrate the effectiveness of the proposed solver when compared with benchmarking ones.

eess.SP↗

arXiv2024

Sum Secrecy Rate Maximization for Full Duplex ISAC Systems

In integrated sensing and communication (ISAC) systems, the target of interest may \textit{intentionally disguise itself as an eavesdropper}, enabling it to intercept and tap into the communication data embedded in the ISAC waveform. The following paper considers a full duplex (FD)-ISAC system, which involves multiple malicious targets attempting to intercept both uplink (UL) and downlink (DL) communications between the dual-functional radar and communication (DFRC) base station (BS) and legitimate UL/DL communication users (CUs). For this, we formulate an optimization framework that allows maximization of both UL and DL sum secrecy rates, under various power budget constraints for sensing and communications. As the proposed optimization problem is non-convex, we develop a method called Iterative Joint Taylor-Block cyclic coordinate descent (IJTB) by proving essential lemmas that transform the original problem into a more manageable form. In essence, IJTB alternates between two sub-problems: one yields UL beamformers in closed-form, while the other approximates the solution for UL power allocation, artificial noise covariance, and DL beamforming vectors. This is achieved through a series of Taylor approximations that effectively \textit{"convexify"} the problem, enabling efficient optimization. Simulation results demonstrate the effectiveness of the proposed solver when compared with benchmarking ones. Our findings reveal that the IJTB algorithm shows fast convergence, reaching stability within approximately $10$ iterations. In addition, all benchmarks reveal a substantial decline in the sum secrecy rate, approaching zero as the eavesdropper distance reaches $17$ meters, underscoring their vulnerability in comparison to IJTB.

eess.SP↗

arXiv2024

Multi-Functional RIS for a Multi-Functional System: Integrating Sensing, Communication, and Wireless Power Transfer

Communication networks are evolving from solely emphasizing communication to facilitating multiple functionalities. In this regard, integrated sensing, communication, and powering (ISCAP) provides an efficient way of enabling data transmission, radar sensing, and wireless power transfer simultaneously. Such a multi-functional network requires a multi-functional architectural solution. Toward this end, sensor-aided zero-energy reconfigurable intelligent surfaces (SAZE-RISs) offer an energy-efficient solution for ISCAP by meeting the requirements of the end users as well as supplying power for the RIS. This paper explores the use of SAZE-RIS within the ISCAP framework. First, we present the general system architecture, operational protocols, and main application scenarios for employing SAZE-RIS in ISCAP. Next, we discuss methods for managing the conflicting requirements of communication, sensing, and powering within ISCAP and the role of SAZE-RIS in this process. We then provide a detailed case study complete with simulation results, offering valuable insights into the design choices and tradeoffs that come into play when adopting this technology. Furthermore, we discuss the related challenges and open research avenues, highlighting areas that require further exploration to fully realize the potential of SAZE-RIS within this ISCAP framework.

eess.SP↗

arXiv2024

Unique Word-Based Frame Design for Bistatic Integrated Sensing and Communication

Integrated sensing and communication (ISAC) aims at enhancing the network functionalities and enabling new applications in the upcoming communications networks. In this paper, we propose two unique word (UW)-based frame designs for bistatic ISAC. The approach consists of replacing the cyclic prefix (CP) with a Zadoff-Chu (ZC)-based sequence. With this approach, the radar receiver does not need to know the data symbols to perform sensing and the data rate is not compromised by the addition of extra pilots. The sensing performance of the UW-based frames is compared with that of orthogonal frequency division multiplexing (OFDM) as well as the pilot-symbol (PS) based radar processing. We derive the Cramér-Rao bound (CRB) considering a band-limited system with raised-cosine filtering. Furthermore, we provide low-complexity fast Fourier transform (FFT)-based radar receivers that perform integer and fine grid multi-target delay-Doppler (DD) estimations. For the integer FFT-based receiver, an upper bound for the outlier probability is derived when the true DD falls outside the integer grid. The results demonstrate that the UW frames exhibit competitive radar performance with PS while having a 16.67% higher data rate for the cases investigated.

eess.SP↗

arXiv2024

Layered Chirp Spread Spectrum Modulations for LPWANs

This article examines two chirp spread spectrum techniques specifically devised for low-power wide-area networks (LPWANs) to optimize energy and spectral efficiency (SE). These methods referred to as layered CSS (LCSS) and layered dual-mode CSS (LDMCSS), involves utilizing multiple layers for multiplexing symbols with varying chirp rates. These waveform designs exemplify a high degree of SE compared to existing schemes. Additionally, LDMCSS necessitates a lesser number of layers than LCSS to attain comparable SE, thereby reducing computational complexity. These proposed techniques can employ coherent and non-coherent detection and can be adjusted to achieve various spectral efficiencies by altering the number of multiplexed layers. Unlike our proposed LCSS and LDMCSS, other CSS alternatives for LPWANs cannot provide the same level of flexibility and SE. The performance of these techniques is evaluated in terms of bit error rate under different channel conditions, as well as with phase and frequency offsets.

eess.SP↗

arXiv2024

Impact of Network Geometry on Large Networks with Intelligent Reflecting Surfaces

In wireless networks assisted by intelligent reflecting surfaces (IRSs), jointly modeling the signal received over the direct and indirect (reflected) paths is a difficult problem. In this work, we show that the network geometry (locations of serving base station, IRS, and user) can be captured using the so-called triangle parameter $Δ$. We introduce a decomposition of the effect of the combined link into a signal amplification factor and an effective channel power coefficient $G$. The amplification factor is monotonically increasing with both the number of IRS elements $N$ and $Δ$. For $G$, since an exact characterization of the distribution seems unfeasible, we propose three approximations depending on the value of the product $NΔ$ for Nakagami fading and the special case of Rayleigh fading. For two relevant models of IRS placement, we prove that their performance is identical if $Δ$ is the same given an $N$. We also show that no gains are achieved from IRS deployment if $N$ and $Δ$ are both small. We further compute bounds on the diversity gain to quantify the channel hardening effect of IRSs. Hence only with a judicious selection of IRS placement and other network parameters, non-trivial gains can be obtained.

cs.IT↗

arXiv2024

Successive Interference Cancellation for ISAC in a Large Full-Duplex Cellular Network

To reuse the scarce spectrum efficiently, a large full-duplex cellular network with integrated sensing and communication (ISAC) is studied. Monostatic detection at the base station (BS) is considered. At the BS, we receive two signals: the communication-mode uplink signal to be decoded and the radar-mode signal to be detected. After self-interference cancellation (SIC), inspired by NOMA, successive interference cancellation (SuIC) is a natural strategy at the BS to retrieve both signals. However, the ordering of SuIC, usually based on some measure of channel strength, is not clear as the radar-mode target is unknown. The detection signal suffers a double path-loss making it vulnerable, but the uplink signal to be decoded originates at a user which has much lower power than the BS making it weak as well. Further, the intercell interference from a large network reduces the channel disparity between the two signals. We investigate the impact of both SuIC orders at the BS, i.e., decoding $1^{st}$ or detecting $1^{st}$ and highlight the importance of careful order selection. We find the existence of a threshold target distance before which detecting $1^{st}$ is superior and decoding $2^{nd}$ does not suffer much. After this distance, both decoding $1^{st}$ and detecting $2^{nd}$ is superior. Similarly, a threshold UE power exists after which the optimum SuIC order changes. We consider imperfections in SIC; this helps highlight the vulnerability of the decoding and detection in the setup.

cs.IT↗

arXiv2024

Complex Neural Network based Joint AoA and AoD Estimation for Bistatic ISAC

Integrated sensing and communication (ISAC) in wireless systems has emerged as a promising paradigm, offering the potential for improved performance, efficient resource utilization, and mutually beneficial interactions between radar sensing and wireless communications, thereby shaping the future of wireless technologies. In this work, we present two novel methods to address the joint angle of arrival and angle of departure estimation problem for bistatic ISAC systems. Our proposed methods consist of a deep learning (DL) solution leveraging complex neural networks, in addition to a parameterized algorithm. By exploiting the estimated channel matrix and incorporating a preprocessing step consisting of a coarse timing estimation, we are able to notably reduce the input size and improve the computational efficiency. In our findings, we emphasize the remarkable potential of our DL-based approach, which demonstrates comparable performance to the parameterized method that explicitly exploits the multiple-input multiple-output (MIMO) model, while exhibiting significantly lower computational complexity.

eess.SP↗

arXiv2024

A System Level Analysis for Integrated Sensing and Communication

In this work, we provide a system level analysis of integrated sensing and communication (ISAC) systems, where a setup with a mono-static dual-functional radar communication base station is assumed. We derive the ISAC signal-to-noise ratio (SNR) equation that relates communication and radar SNR for different distances. We also derive the ISAC range equation, which can be used for sensing-assisted beamforming applications. Specifically, we show that increasing the frequency and bandwidth is more favorable to the radar application in terms of relative SNR and range while increasing the transmit power is more favorable to communications. Numerical examples reveal that if the range for communication and radar is desired to be in the same order, the ISAC system should operate in mmWave or sub-THz bands, whereas sub-6GHz allows scenarios where the communication range is of orders of magnitude higher than that of radar.

eess.SP↗

arXiv2024

On the Performance Analysis of Zero-Padding OFDM for Monostatic ISAC Systems

This paper considers an integrated sensing and communication (ISAC) system with monostatic radar functionality using a zero-padding orthogonal frequency division multiplexing (ZP-OFDM) downlink transmission. We focus on ISAC's sensing aspect, employing an energy-detection (ED) method. The ZP-OFDM transmission is motivated by the fact that sensing can be performed during the silent periods of the transmitter, thereby avoiding self-interference (SI) cancellation processing of the in-band full duplex operation, which is needed for the cyclic prefix (CP)-OFDM. Additionally, we also show that ZP-OFDM can reject nearby clutter interference. We derive the probability of detection (PD) for the ZP and CP-OFDM systems, allowing useful performance analyses. In particular, we show that the PD expressions lead to an upper bound for the ZP-OFDM transmission, which is useful for selecting the best ZP size for a given system configuration. We also provide an expression that allows range comparison between ZP and CP-OFDM, where we consider a general case of imperfect SI cancellation for the CP-OFDM system. The results show that when the ZP size is 25% of the fast Fourier transform size, the range loss of the ZP system range is only 17% larger than the CP transmission.

eess.SP↗

arXiv2024

On Hybrid Radar Fusion for Integrated Sensing and Communication

The following paper introduces a novel integrated sensing and communication (ISAC) scenario termed hybrid radar fusion. In this setting, the dual-functional radar and communications (DFRC) base station (BS) acts as a mono-static radar in the downlink (DL), for sensing purposes, while performing its DL communication tasks. Meanwhile, the communication users act as distributed bi-static radar nodes in the uplink (UL) following a frequency-division duplex protocol. The DFRC BS fuses the information available at different DL and UL resource bands to estimate the angles-of-arrival (AoAs) of the multiple targets existing in the scene. In this work, we derive the maximum likelihood (ML) criterion for the hybrid radar fusion problem at hand. Additionally, we design efficient estimators; the first algorithm is based on an alternating optimization approach to solve the ML criterion, while the second one designs an optimization framework that leads to an alternating subspace approach to estimate AoAs for both the target and users. Finally, we demonstrate the superior performance of both algorithms in different scenarios, and the gains offered by these proposed methods through numerical simulations.

eess.SP↗

arXiv2024

Full-Stack End-to-End Sub-THz Simulations at 140 GHz using NYUSIM Channel Model in ns-3

The next generation of wireless communication is expected to harness the potential of the sub-THz bands to achieve exceptional performance and ubiquitous connectivity. However, network simulators such as ns-3 currently lack support for channel models above 100 GHz. This limits the ability of researchers to study, design, and evaluate systems operating above 100 GHz. Here, we use the drop-based NYUSIM channel model to simulate channels above 100 GHz in all 3GPP scenarios including urban microcell (UMi), urban macrocell (UMa), rural macrocell (RMa), indoor hotspot (InH), and indoor factory (InF). We evaluate the full stack downlink end-to-end performance (throughput, latency, and packet drop) experienced by a single user equipment (UE) connected to a Next Generation Node B (gNB) operating in the sub-THz bands for three gNB--UE antenna configurations: 8x8--4x4, 16x16--4x4, and 64x64--8x8 by using the NYUSIM channel model at 140 GHz in the ns-3 mmWave module. Our simulations demonstrate that sub-THz bands can enable high-fidelity applications that require data rates exceeding 1 Gbps and latency below 15 milliseconds (ms) using the current mmWave protocol stack, and large antenna arrays. In addition, we show the variation in throughput vs number of realizations and find the optimal number of realizations required to obtain statistically significant results. We strongly encourage researchers worldwide to adopt a similar approach, as it enables the readers to assess the accuracy and reliability of the reported results and enhance the findings' overall interpretability.

cs.IT↗

arXiv2023

RIS-Enabled Integrated Sensing and Communication for 6G Systems

The following paper proposes a new target localization system design using an architecture based on reconfigurable intelligent surfaces (RISs) and passive radars (PRs) for integrated sensing and communications systems. The preamble of the communication signal is exploited in order to perform target sensing tasks, which involve detection and localization. The RIS in this case can aid the PR in sensing targets that are otherwise not seen by the PR itself, due to the many obstacles encountered within the propagation channel. Therefore, this work proposes a localization algorithm tailored for the integrated sensing and communications RIS-aided architecture, which is capable of uniquely positioning targets within the scene. The algorithm is capable of detecting the number of targets along with estimating the position of targets via angles and times of arrival. Our simulation results demonstrate the performance of the localization method in terms of different localization and detection metrics and for increasing RIS sizes.

eess.SP↗

arXiv2023

Secure Full Duplex Integrated Sensing and Communications

The following paper models a secure full duplex (FD) integrated sensing and communication (ISAC) scenario, where malicious eavesdroppers aim at intercepting the downlink (DL) as well as the uplink (UL) information exchanged between the dual functional radar and communication (DFRC) base station (BS) and a set of communication users. The DFRC BS, on the other hand, aims at illuminating radar beams at the eavesdroppers in order to sense their physical parameters, while maintaining high UL/DL secrecy rates. Based on the proposed model, we formulate a power efficient secure ISAC optimization framework design, which is intended to guarantee both UL and DL secrecy rates requirements, while illuminating radar beams towards eavesdroppers. The framework exploits artificial noise (AN) generation at the DFRC BS, along with UL/DL beamforming design and UL power allocation. We propose a beamforming design solution to the secure ISAC optimization problem. Finally, we corroborate our findings via simulation results and demonstrate the feasibility, as well as the superiority of the proposed algorithm, under different situations. We also reveal insightful trade-offs achieved by our approach.

eess.SP↗

arXiv2023

Emergent Communication in Multi-Agent Reinforcement Learning for Future Wireless Networks

In different wireless network scenarios, multiple network entities need to cooperate in order to achieve a common task with minimum delay and energy consumption. Future wireless networks mandate exchanging high dimensional data in dynamic and uncertain environments, therefore implementing communication control tasks becomes challenging and highly complex. Multi-agent reinforcement learning with emergent communication (EC-MARL) is a promising solution to address high dimensional continuous control problems with partially observable states in a cooperative fashion where agents build an emergent communication protocol to solve complex tasks. This paper articulates the importance of EC-MARL within the context of future 6G wireless networks, which imbues autonomous decision-making capabilities into network entities to solve complex tasks such as autonomous driving, robot navigation, flying base stations network planning, and smart city applications. An overview of EC-MARL algorithms and their design criteria are provided while presenting use cases and research opportunities on this emerging topic.

cs.LG↗

arXiv2023

Meta Distribution of Partial-NOMA

This work studies the meta distribution (MD) in a two-user partial non-orthogonal multiple access (pNOMA) network. Compared to NOMA where users fully share a resource-element, pNOMA allows sharing only a fraction $α$ of the resource-element. The MD is computed via moment-matching using the first two moments where reduced integral expressions are derived. Accurate approximates are also proposed for the $b{\rm th}$ moment for mathematical tractability. We show that in terms of percentile-performance of links, pNOMA only outperforms NOMA when $α$ is small. Additionally, pNOMA improves the percentile-performance of the weak-user more than the strong-user highlighting its role in improving fairness.

cs.IT↗

arXiv2023

Sparse-DFT and WHT Precoding with Iterative Detection for Highly Frequency-Selective Channels

Various precoders have been recently studied by the wireless community to combat the channel fading effects. Two prominent precoders are implemented with the discrete Fourier transform (DFT) and Walsh-Hadamard transform (WHT). The WHT precoder is implemented with less complexity since it does not need complex multiplications. Also, spreading can be applied sparsely to decrease the transceiver complexity, leading to sparse DFT (SDFT) and sparse Walsh-Hadamard (SWH). Another relevant topic is the design of iterative receivers that deal with inter-symbol-interference (ISI). In particular, many detectors based on expectation propagation (EP) have been proposed recently for channels with high levels of ISI. An alternative is the maximum a-posterior (MAP) detector, although it leads to unfeasible high complexity in many cases. In this paper, we provide a relatively low-complexity \textcolor{black}{computation} of the MAP detector for the SWH. We also propose two \textcolor{black}{feasible methods} based on the Log-MAP and Max-Log-MAP. Additionally, the DFT, SDFT and SWH precoders are compared using an EP-based receiver with one-tap FD equalization. Lastly, SWH-Max-Log-MAP is compared to the (S)DFT with EP-based receiver in terms of performance and complexity. The results show that the proposed SWH-Max-Log-MAP has a better performance and complexity trade-off for QPSK and 16-QAM under highly selective channels, but has unfeasible complexity for higher QAM orders.

cs.IT↗

arXiv2023

RNN Based Channel Estimation in Doubly Selective Environments

Doubly-selective channel estimation represents a key element in ensuring communication reliability in wireless systems. Due to the impact of multi-path propagation and Doppler interference in dynamic environments, doubly-selective channel estimation becomes challenging. Conventional symbol-by-symbol (SBS) and frame-by-frame (FBF) channel estimation schemes encounter performance degradation in high mobility scenarios due to the usage of limited training pilots. Recently, deep learning (DL) has been utilized for doubly-selective channel estimation, where long short-term memory (LSTM) and convolutional neural network (CNN) networks are employed in the SBS and FBF, respectively. However, their usage is not optimal, since LSTM suffers from long-term memory problem, whereas, CNN-based estimators require high complexity. For this purpose, we overcome these issues by proposing an optimized recurrent neural network (RNN)-based channel estimation schemes, where gated recurrent unit (GRU) and Bi-GRU units are used in SBS and FBF channel estimation, respectively. The proposed estimators are based on the average correlation of the channel in different mobility scenarios, where several performance-complexity trade-offs are provided. Moreover, the performance of several RNN networks is analyzed. The performance superiority of the proposed estimators against the recently proposed DL-based SBS and FBF estimators is demonstrated for different scenarios while recording a significant reduction in complexity.

cs.IT↗