arXiv subjects

Marwa Chafii

Publications and source records attributed to Marwa Chafii.

At least 73 records · Page 4Linked to original sources

arXiv2023

A Novel Satellite Selection Algorithm Using LSTM Neural Networks For Single-epoch Localization

This work presents a new approach for detection and exclusion (or de-weighting) of pseudo-range measurements from the Global Navigation Satellite System (GNSS) in order to improve the accuracy of single-epoch positioning, which is an essential prerequisite for maintaining good navigation performance in challenging operating contexts (e.g., under Non-Line of Sight and/or multipath propagation). Beyond the usual preliminary hard decision stage, which can mainly reject obvious outliers, our approach exploits machine learning to optimize the relative contributions from all available satellites feeding the positioning solver. For this, we construct a customized matrix of pseudorange residuals that is used as an input to the proposed longshort term memory neural network (LSTM NN) architecture. The latter is trained to predict several quality indicators that roughly approximate the standard deviations of pseudo-range errors, which are further integrated in the calculation of weights. Our numerical evaluations on both synthetic and real data show that the proposed solution is able to outperform conventional weighting and signal selection strategies from the state-of-theart, while fairly approaching optimal positioning accuracy.

eess.SP↗

arXiv2023

Experimental Performance of Blind Position Estimation Using Deep Learning

Accurate indoor positioning for wireless communication systems represents an important step towards enhanced reliability and security, which are crucial aspects for realizing Industry 4.0. In this context, this paper presents an investigation on the real-world indoor positioning performance that can be obtained using a deep learning (DL)-based technique. For obtaining experimental data, we collect power measurements associated with reference positions using a wireless sensor network in an indoor scenario. The DL-based positioning scheme is modeled as a supervised learning problem, where the function that describes the relation between measured signal power values and their corresponding transmitter coordinates is approximated. We compare the DL approach to two different schemes with varying degrees of online computational complexity. Namely, maximum likelihood estimation and proximity. Furthermore, we provide a performance comparison of DL positioning trained with data generated exclusively based on a statistical path loss model and tested with experimental data.

eess.SP↗

arXiv2023

Blind Transmitter Localization Using Deep Learning: A Scalability Study

This work presents an investigation on the scalability of a deep leaning (DL)-based blind transmitter positioning system for addressing the multi transmitter localization (MLT) problem. The proposed approach is able to estimate relative coordinates of non-cooperative active transmitters based solely on received signal strength measurements collected by a wireless sensor network. A performance comparison with two other solutions of the MLT problem are presented for demonstrating the benefits with respect to scalability of the DL approach. Our investigation aims at highlighting the potential of DL to be a key technique that is able to provide a low complexity, accurate and reliable transmitter positioning service for improving future wireless communications systems.

eess.SP↗

arXiv2023

Integrated Sensing and Communication for Large Networks using Joint Detection and a Dynamic Transmission Strategy

A large network employing integrated sensing and communication (ISAC) where a single transmit signal by the base station (BS) serves both the radar and communication modes is studied. We consider bistatic detection at a passive radar and monostatic detection at the transmitting BS. The radar-mode performance is significantly more vulnerable than the communication-mode due to the double path-loss in the signal component while interferers have direct links. To combat this, we propose: 1) a novel dynamic transmission strategy (DTS), 2) joint monostatic and bistation detection via cooperation at the BS. We analyze the performance of monostatic, bistatic and joint detection. We show that bistatic detection with dense deployment of low-cost passive radars offers robustness in detection for farther off targets. Significant improvements in radar-performance can be attained with joint detection in certain scenarios, while using one strategy is beneficial in others. Our results highlight that with DTS we are able to significantly improve quality of radar detection at the cost of quantity. Further, DTS causes some performance deterioration to the communication-mode; however, the gains attained for the radar-mode are much higher. We show that joint detection and DTS together can significantly improve radar performance from a traditional radar-network.

cs.IT↗

arXiv2023

SCA-Based Beamforming Optimization for IRS-Enabled Secure Integrated Sensing and Communication

Integrated sensing and communication (ISAC) is expected to be offered as a fundamental service in the upcoming sixth-generation (6G) communications standard. However, due to the exposure of information-bearing signals to the sensing targets, ISAC poses unique security challenges. In recent years, intelligent reflecting surfaces (IRSs) have emerged as a novel hardware technology capable of enhancing the physical layer security of wireless communication systems. Therefore, in this paper, we consider the problem of transmit and reflective beamforming design in a secure IRS-enabled ISAC system to maximize the beampattern gain at the target. The formulated non-convex optimization problem is challenging to solve due to the intricate coupling between the design variables. Moreover, alternating optimization (AO) based methods are inefficient in finding a solution in such scenarios, and convergence to a stationary point is not theoretically guaranteed. Therefore, we propose a novel successive convex approximation (SCA)-based second-order cone programming (SOCP) scheme in which all of the design variables are updated simultaneously in each iteration. The proposed SCA-based method significantly outperforms a penalty-based benchmark scheme previously proposed in this context. Moreover, we also present a detailed complexity analysis of the proposed scheme, and show that despite having slightly higher per-iteration complexity than the benchmark approach the average problem-solving time of the proposed method is notably lower than that of the benchmark scheme.

eess.SP↗

arXiv2023

Deep Learning-based Estimation for Multitarget Radar Detection

Target detection and recognition is a very challenging task in a wireless environment where a multitude of objects are located, whether to effectively determine their positions or to identify them and predict their moves. In this work, we propose a new method based on a convolutional neural network (CNN) to estimate the range and velocity of moving targets directly from the range-Doppler map of the detected signals. We compare the obtained results to the two dimensional (2D) periodogram, and to the similar state of the art methods, 2DResFreq and VGG-19 network and show that the estimation process performed with our model provides better estimation accuracy of range and velocity index in different signal to noise ratio (SNR) regimes along with a reduced prediction time. Afterwards, we assess the performance of our proposed algorithm using the peak signal to noise ratio (PSNR) which is a relevant metric to analyse the quality of an output image obtained from compression or noise reduction. Compared to the 2D-periodogram, 2DResFreq and VGG-19, we gain 33 dB, 21 dB and 10 dB, respectively, in terms of PSNR when SNR = 30 dB.

eess.SP↗

arXiv2023

Deep Neural Network Augmented Wireless Channel Estimation for Preamble-based OFDM PHY on Zynq System on Chip

Reliable and fast channel estimation is crucial for next-generation wireless networks supporting a wide range of vehicular and low-latency services. Recently, deep learning (DL) based channel estimation has been explored as an efficient alternative to conventional least-square (LS) and linear minimum mean square error (LMMSE) approaches. Most of these DL approaches have not been realized on system-on-chip (SoC), and preliminary study shows that their complexity exceeds the complexity of the entire physical layer (PHY). The high latency of DL is another concern. This paper considers the design and implementation of deep neural network (DNN) augmented LS-based channel estimation (LSDNN) for preamble-based orthogonal frequency-division multiplexing (OFDM) physical layer (PHY) on SoC. We demonstrate the gain in performance compared to the conventional LS and LMMSE approaches. Via software-hardware co-design, word-length optimization, and reconfigurable architectures, we demonstrate the superiority of the LSDNN over the LS and LMMSE for a wide range of signal-to-noise ratio (SNR), number of pilots, preamble types, and wireless channels. Further, we evaluate the performance, power, and area (PPA) of the LS and LSDNN application-specific integrated circuit (ASIC) implementations in 45 nm technology. We demonstrate that word-length optimization can substantially improve PPA for the proposed architecture in ASIC implementations.

cs.AR↗

arXiv2023

Deep Learning Based Channel Estimation in High Mobility Communications Using Bi-RNN Networks

Doubly-selective channel estimation represents a key element in ensuring communication reliability in wireless systems. Due to the impact of multi-path propagation and Doppler interference in dynamic environments, doubly-selective channel estimation becomes challenging. Conventional channel estimation schemes encounter performance degradation in high mobility scenarios due to the usage of limited training pilots. Recently, deep learning (DL) has been utilized for doubly-selective channel estimation, where convolutional neural network (CNN) networks are employed in the frame-by-frame (FBF) channel estimation. However, CNN-based estimators require high complexity, making them impractical in real-case scenarios. For this purpose, we overcome this issue by proposing an optimized and robust bi-directional recurrent neural network (Bi-RNN) based channel estimator to accurately estimate the doubly-selective channel, especially in high mobility scenarios. The proposed estimator is based on performing end-to-end interpolation using gated recurrent unit (GRU) unit. Extensive numerical experiments demonstrate that the developed Bi-GRU estimator significantly outperforms the recently proposed CNN-based estimators in different mobility scenarios, while substantially reducing the overall computational complexity.

cs.IT↗

arXiv2023

Chirp Spread Spectrum-based Waveform Design and Detection Mechanisms for LPWAN-based IoT -- A Survey

LoRa is a widely adopted method of utilizing chirp spread spectrum (CSS) techniques at the physical (PHY) layer to facilitate low-power wide-area network (LPWAN) connectivity. By tailoring the spreading factors, LoRa can achieve a diverse spectral and energy efficiency (EE) levels, making it amenable to a plethora of Internet-of-Things (IoT) applications that rely on LPWANs. However, a primary drawback of LoRa is its relatively low data data rate. Despite this, there has been a dearth of research dedicated to enhancing the data transfer capabilities of LoRa until recently, when a plethora of CSS-based PHY layer alternatives to LoRa for LPWANs was proposed. This survey, for the first time, presents a comprehensive examination of the waveform design of these CSS-based PHY layer alternatives, proposed between \(2019\) and \(2022\). A total of fifteen alternatives to LoRa are analyzed. This study delves deeply into the waveform design of alternatives to LoRa. The CSS schemes studied in this study are classified into three categories: single chirp, multiple chirps, and multiple chirps with index modulation, based on the number of activated frequency shifts activated for un-chirped symbols. The transceiver architecture of these schemes is thoroughly explicated. Additionally, we propose coherent/non-coherent detection mechanisms for specific schemes that have not been previously documented in the literature. We also provide some key insights and recommendations based on the performance of the schemes. The performance of the schemes is evaluated based on metrics such as EE, spectral efficiency, the bit-error-rate (BER) in additive white Gaussian noise, and BER in the presence of phase and frequency offsets. Finally, we highlight some open research issues and future research directions in this field.

eess.SP↗

arXiv2023

Robust Integrated Sensing and Communication Beamforming for Dual-functional Radar and Communications: Method and Insights

This work presents a novel robust beamforming design dedicated for dual-functional radar and communication (DFRC) base stations (BSs) in the context of integrated sensing and communications (ISAC). The architecture is intended for circumstances with imperfect channel state information (CSI). Our suggested approach demonstrates several tradeoffs for joint radar-communication deployment. Due to the DFRC nature of the design, the beamformer can simultaneously point towards an intended target, while optimizing communication quality of service. We unveil several insights regarding closed form expressions, as well as optimality of the proposed beamformer. Lastly, simulation results demonstrate the effectiveness of the proposed ISAC beamformer.

eess.SP↗

arXiv2023

On Integrated Sensing and Communication Waveforms with Tunable PAPR

We present a novel approach to the problem of dual-functional radar and communication (DFRC) waveform design with adjustable peak-to-average power ratio (PAPR), while minimizing the multi-user communication interference and maintaining a similarity constraint towards a radar chirp signal. The approach is applicable to generic radar chirp signals and for different constellation sizes. We formulate the waveform design problem as a non convex optimization problem. As a solution, we adopt the alternating direction method of multipliers (ADMM), hence iterating towards a stable waveform for both radar and communication purposes. Additionally, we prove convergence of the proposed method and analyze its computational complexity. Moreover, we offer an extended version of the method to cope with imperfect channel state information (CSI). Finally, we demonstrate its superior performance through simulations, in comparison to state-of-the-art radar-communication waveform designs.

eess.SP↗

arXiv2023

Twelve Scientific Challenges for 6G: Rethinking the Foundations of Communications Theory

The research in the sixth generation of communication networks needs to tackle new challenges in order to meet the requirements of emerging applications in terms of high data rate, low latency, high reliability, and massive connectivity. To this end, the entire communication chain needs to be optimized, including the channel and the surrounding environment, as it is no longer sufficient to control the transmitter and/or the receiver only. Investigating large intelligent surfaces, ultra massive multiple-input multiple-output, and smart constructive environments will contribute to this direction. In addition, to allow the exchange of high dimensional sensing data between connected intelligent devices, semantic and goal oriented communications need to be considered for a more efficient and context-aware information encoding. In particular, for multi-agent systems, where agents are collaborating together to achieve a complex task, emergent communications, instead of hard coded communications, can be learned for more efficient task execution and communication resources use. Moreover, new physics phenomenon should be exploited such as the thermodynamics of communication as well as the the interaction between information theory and electromagnetism to better understand the physical limitations of different technologies, e.g, holographic communications. Another new communication paradigm is to consider the end-to-end approach instead of block-by-block optimization, which requires exploiting machine learning theory, non-linear signal processing theory, and non-coherent communications theory. Within this context, we identify twelve scientific challenges for rebuilding the theoretical foundations of communications, and we overview each of the challenges while providing research opportunities and open questions for the research community.

cs.IT↗

arXiv2023

On Outage-based Beamforming Design for Dual-Functional Radar-Communication 6G Systems

This article studies and derives beamforming design in a dual-functional radar-communication (DFRC) multiple-input-multiple-output system. We focus on a scenario, where the DFRC base station communicates with downlink communication users, with imperfect channel state information knowledge, and performs target detection, all via the same transmit signal. Through careful relaxation procedures, we arrive at a suitable and novel optimization problem, which maximizes the radar output power in the Bartlett sense, under probabilistic outage signal-to-interference-and-noise ratio constraints. Theoretical analysis proves optimality of the solution given by the relaxed version of the problem, as well as closed-form solutions in certain scenarios. Finally, the achieved performances and trade-offs of the proposed beamforming design are demonstrated through numerical simulations.

eess.SP↗

arXiv2022

Bounds on Power and Common Message Fractions for RSMA with Imperfect SIC

Rate-Splitting multiple access (RSMA) has emerged as a key enabler in improving the performance of the beyond fifth-generation (5G) cellular networks. The existing literature has typically considered the sum rate of the users to evaluate the performance of RSMA. However, it has been shown in the existing works that maximizing the sum rate can result in asymmetric user performance. It significantly enhances one user's rate at the cost of the rate of another RSMA user. Further, imperfections can reduce the performance of successive interference cancellation (SIC)-based RSMA. Therefore, in this letter, we consider the imperfection in SIC and derive suitable bounds on fractions of the power allocated for common and private messages and the fraction of common message intended for each user in an RSMA pair such that their individual RSMA rates are greater than their respective orthogonal multiple access (OMA) rates. Through simulations, we validate the derived bounds. We show that they can be used to appropriately select the RSMA parameters resulting in users' RSMA rates being better than their respective OMA rates.

eess.SP↗

arXiv2022

RIS-Enabled Passive Radar towards Target Localization

In this paper, we study a communication-centric integrated sensing and communication (ISAC) approach, where an access point (AP) communicates with users, while a passive radar (PR) is present in the environment. We investigate the deployment of a reconfigurable intelligent surface (RIS) to enable the PR to localize a target. We derive an optimization problem for updating the phase shifters of the RIS per epoch. Due to the limited information at the PR, such as unknown payload information and unknown number of targets in the scene, we propose two methods capable of performing joint angle of arrival estimation and detection of the targets. We demonstrate the superior performance of the methods onto the proposed setting through numerical simulations, in comparison to a no-RIS baseline scheme.

eess.SP↗

arXiv2022

Federated Distillation based Indoor Localization for IoT Networks

Federated distillation (FD) paradigm has been recently proposed as a promising alternative to federated learning (FL) especially in wireless sensor networks with limited communication resources. However, all state-of-the art FD algorithms are designed for only classification tasks and less attention has been given to regression tasks. In this work, we propose an FD framework that properly operates on regression learning problems. Afterwards, we present a use-case implementation by proposing an indoor localization system that shows a good trade-off communication load vs. accuracy compared to federated learning (FL) based indoor localization. With our proposed framework, we reduce the number of transmitted bits by up to 98%. Moreover, we show that the proposed framework is much more scalable than FL, thus more likely to cope with the expansion of wireless networks.

eess.SP↗

arXiv2022

Dual-Mode Time Domain Multiplexed Chirp Spread Spectrum

We propose a dual-mode (DM) time domain multiplexed (TDM) chirp spread spectrum (CSS) modulation for spectral and energy-efficient low-power wide-area networks (LPWANs). DM-CSS modulation that uses both the even and odd cyclic time shifts has been proposed for LPWANs to achieve noteworthy performance improvement over classical counterparts. However, its spectral efficiency (SE) is half of the in-phase and quadrature (IQ)-TDM-CSS scheme that employs IQ components with both up and down chirps, resulting in a SE that is four times relative to Long Range (LoRa) modulation. Nevertheless, the IQ-TDM-CSS scheme only allows coherent detection. Furthermore, it is also sensitive to carrier frequency and phase offsets, making it less practical for low-cost battery-powered LPWANs for Internet-of-Things (IoT) applications. DM-CSS uses either an up-chirp or a down-chirp. DM-TDM-CSS consists of two chirped symbols that are multiplexed in the time domain. One of these symbols consisting of even and odd frequency shifts (FSs) is chirped using an up-chirp. The second chirped symbol also consists of even and odd FSs, but they are chirped using a down-chirp. It shall be demonstrated that DM-TDM-CSS attains a maximum achievable SE close to IQ-TDM-CSS while also allowing both coherent and non-coherent detection. Additionally, unlike IQ-TDM-CSS, DM-TDM-CSS is robust against carrier frequency and phase offsets.

eess.SP↗

arXiv2022

Dual-Mode Chirp Spread Spectrum Modulation

In this letter, we propose dual-mode chirp spread spectrum (DM-CSS) modulation for low-power wide-area networks. DM-CSS is capable of achieving a higher spectral efficiency (SE) relative to its counterparts, such as Long Range (LoRa) modulation. Considering the same symbol period, the SE in DM-CSS are augmented by: (i) simultaneously multiplexing even and odd chirp signals; (ii) using phase shifts of \(0\) and \(π\) radians for both even and odd chirp signals; and (iii) using either up-chirp or down-chirp signal. The SE increases by up to \(116.66\%\) for the same bandwidth and spreading factor relative to LoRa. We present a complete transceiver architecture along with non-coherent detection process. Simulation results reveal that DM-CSS is not only more spectral efficient but also more energy efficient than most classical counterparts. It is also demonstrated that DM-CSS is robust to phase and frequency offsets.

eess.SP↗