arXiv subjects

Matthew Brahlek

Publications and source records attributed to Matthew Brahlek.

At least 73 records · Page 4Linked to original sources

arXiv2020

Pulsed-laser epitaxy of metallic delafossite PdCrO$_2$ films

Alternate stacking of a highly conducting metallic layer with a magnetic triangular layer found in delafossite PdCrO2 provides an excellent platform for discovering intriguing correlated quantum phenomena. Thin film growth of the material may enable not only tuning the basic physical properties beyond what bulk materials can exhibit, but also developing novel hybrid materials by interfacing with dissimilar materials, yet this has proven to be extremely challenging. Here, we report the epitaxial growth of metallic delafossite PdCrO2 films by pulsed laser epitaxy (PLE). The fundamental role of the PLE growth conditions, epitaxial strain, and chemical and structural characteristics of the substrate is investigated by growing under various growth conditions and on various types of substrates. While strain plays a large role in improving the crystallinities, the direct growth of epitaxial PdCrO2 films without impurity phases was not successful. We attribute this difficulty to both the chemical and structural dissimilarities between the substrates and volatile nature of PdO layer, which make nucleation of the right phase difficult. This difficulty was overcome by growing CuCrO2 buffer layers before PdCrO2 were grown. Unlike PdCrO2, CuCrO2 films were rather readily grown with a relatively wide growth window. Only monolayer thick buffer layer was sufficient to grow the correct PdCrO2 phase. This result indicates that the epitaxy of Pd-based delafossites is extremely sensitive to the chemistry and structure of the interface, necessitating near perfect substrate materials. The resulting films are commensurately strained and show an antiferromagnetic transition at 40 K that persists down to as thin as 3.6 nm in thickness.

physics.app-ph↗

arXiv2019

Magnetic anisotropy in single crystal high entropy perovskite oxide La(Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3 films

Local configurational disorder can have a dominating role in the formation of macroscopic functional responses in strongly correlated materials. Here, we use entropy-stabilization synthesis to create single crystal epitaxial ABO3 perovskite thin films with equal atomic concentration of 3d transition metal cations on the B-site sublattice. X-ray diffraction, atomic force microscopy, and scanning transmission electron microscopy of La(Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3 (L5BO) films demonstrate excellent crystallinity, smooth film surfaces, and uniform mixing of the 3d transition metal cations throughout the B-site sublattice. The magnetic properties are strongly dependent on substrate-induced lattice anisotropy and suggest the presence of long-range magnetic order in these exceptionally disordered materials. The ability to populate multiple elements onto a single sublattice in complex crystal structures opens new possibilities to design functionality in correlated systems and enable novel fundamental studies seeking to understand how diverse local bonding environments can work to generate macroscopic responses, such as those driven by electron-phonon channels and complex exchange interaction pathways.

cond-mat.str-el↗

arXiv2019

Growth of metallic delafossite PdCoO2 by molecular beam epitaxy

The Pd, and Pt based ABO2 delafossites are a unique class of layered, triangular oxides with 2D electronic structure and a large conductivity that rivals the noble metals. Here, we report successful growth of the metallic delafossite PdCoO2 by molecular beam epitaxy (MBE). The key challenge is controlling the oxidation of Pd in the MBE environment where phase-segregation is driven by the reduction of PdCoO2 to cobalt oxide and metallic palladium. This is overcome by combining low temperature (300 °C) atomic layer-by-layer MBE growth in the presence of reactive atomic oxygen with a post-growth high-temperature anneal. Thickness dependence (5-265 nm) reveals that in the thin regime (<75 nm), the resistivity scales inversely with thickness, likely dominated by surface scattering; for thicker films the resistivity approaches the values reported for the best bulk-crystals at room temperature, but the low temperature resistivity is limited by structural twins. This work shows that the combination of MBE growth and a post-growth anneal provides a route to creating high quality films in this interesting family of layered, triangular oxides.

cond-mat.mtrl-sci↗

arXiv2018

Strong nonlinear terahertz response induced by Dirac surface states in Bi2Se3 Topological Insulator

Electrons with a linear energy/momentum dispersion are called massless Dirac electrons and represent the low-energy excitations in exotic materials like Graphene and Topological Insulators (TIs). Dirac electrons are characterized by notable properties like a high mobility, a tunable density and, in TIs, a protection against backscattering through the spin-momentum looking mechanism. All those properties make Graphene and TIs appealling for plasmonics applications. However, Dirac electrons are expected to present also a strong nonlinear optical behavior. This should mirror in phenomena like electromagnetic induced transparency (EIT) and harmonic generation. Here, we demonstrate that in Bi2Se3 Topological Insulator, an EIT is achieved under the application of a strong terahertz (THz) electric field. This effect, concomitant determined by harmonic generation and charge-mobility reduction, is exclusively related to the presence of Dirac electron at the surface of Bi2Se_3, and opens the road towards tunable THz nonlinear optical devices based on Topological Insulator materials.

cond-mat.mes-hall↗

arXiv2017

A novel artificial condensed matter lattice and a new platform for one-dimensional topological phases

Engineered lattices in condensed matter physics, such as cold atom optical lattices or photonic crystals, can have fundamentally different properties from naturally-occurring electronic crystals. Here, we report a novel type of artificial quantum matter lattice. Our lattice is a multilayer heterostructure built from alternating thin films of topological and trivial insulators. Each interface within the heterostructure hosts a set of topologically-protected interface states, and by making the layers sufficiently thin, we demonstrate for the first time a hybridization of interface states across layers. In this way, our heterostructure forms an emergent atomic chain, where the interfaces act as lattice sites and the interface states act as atomic orbitals, as seen from our measurements by angle-resolved photoemission spectroscopy (ARPES). By changing the composition of the heterostructure, we can directly control hopping between lattice sites. We realize a topological and a trivial phase in our superlattice band structure. We argue that the superlattice may be characterized in a significant way by a one-dimensional topological invariant, closely related to the invariant of the Su-Schrieffer-Heeger model. Our topological insulator heterostructure demonstrates a novel experimental platform where we can engineer band structures by directly controlling how electrons hop between lattice sites.

cond-mat.mtrl-sci↗

arXiv2016

Helicity dependent photovoltaic effect in Bi2Se3 under normal incident light

Topological insulators (TIs) form a new class of materials with insulating bulk and surface conduction ensured by topologically protected surface states (TPSS). We investigate the impact of the helicity of a normally incident laser beam on the photovoltaic effect in the TI Bi2Se3. The observation of a helicity dependent photovoltaic effect for normally incident light indicates the presence of out-of-plane spin components for some TPSSs due to the hexagonal warping. In addition, fluctuations in the electrostatic potential at the surface locally break the rotational symmetry of the film allowing the helicity dependent photovoltaic effect. Our result suggests that engineering local electrostatic potentials in Bi2Se3 would allow the control of optically generated spin currents, which may be useful for applications in spin-optoelectronics.

cond-mat.mtrl-sci↗

arXiv2016

Disorder-driven topological phase transition in Bi2Se3 films

Topological insulators (TI) are a phase of matter that host unusual metallic states on their surfaces. Unlike the states that exist on the surface of conventional materials, these so-called topological surfaces states (TSS) are protected against disorder-related localization effects by time reversal symmetry through strong spin-orbit coupling. By combining transport measurements, angle-resolved photo-emission spectroscopy and scanning tunneling microscopy, we show that there exists a critical level of disorder beyond which the TI Bi2Se3 loses its ability to protect the metallic TSS and transitions to a fully insulating state. The absence of the metallic surface channels dictates that there is a change in topological character, implying that disorder can lead to a topological phase transition even without breaking the time reversal symmetry. This observation challenges the conventional notion of topologically-protected surface states, and will provoke new studies as to the fundamental nature of topological phase of matter in the presence of disorder.

cond-mat.mtrl-sci↗

arXiv2016

Tunable inverse topological heterostructure utilizing $(Bi_{1-x}In_{x})_{2}Se_{3}$

In typical topological insulator (TI) systems the TI is bordered by a non-TI insulator, and the surrounding conventional insulators, including vacuum, are not generally treated as part of the TI system. Here, we implement the first material system where the roles are reversed, and the TSS form around the non-TI (instead of the TI) layers. This is realized by growing a layer of the tunable non-TI $(Bi_{1-x}In_{x})_{2}Se_{3}$ in between two layers of the TI $Bi_2Se_3$ using the atomically-precise molecular beam epitaxy technique. On this tunable inverse topological platform, we systematically vary the thickness and the composition of the $(Bi_{1-x}In_{x})_{2}Se_{3}$ layer and show that this tunes the coupling between the TI layers from strongly-coupled metallic to weakly-coupled, and finally to a fully-decoupled insulating regime. This system can be used to probe the fundamental nature of coupling in TI materials and provides a tunable insulating layer for TI devices.

cond-mat.mtrl-sci↗

arXiv2015

Record Surface State Mobility and Quantum Hall Effect in Topological Insulator Thin Films via Interface Engineering

Material defects remain as the main bottleneck to the progress of topological insulators (TIs). In particular, efforts to achieve thin TI samples with dominant surface transport have always led to increased defects and degraded mobilities, thus making it difficult to probe the quantum regime of the topological surface states. Here, by utilizing a novel buffer layer scheme composed of an In2Se3/(Bi0.5In0.5)2Se3 heterostructure, we introduce a quantum generation of Bi2Se3 films with an order of magnitude enhanced mobilities than before. This scheme has led to the first observation of the quantum Hall effect in Bi2Se3.

cond-mat.mtrl-sci↗

arXiv2015

Stability of low-carrier-density topological-insulator Bi$_2$Se$_3$ thin films and effect of capping layers

Although over the past number of years there have been many advances in the materials aspects of topological insulators (TI), one of the ongoing challenges with these materials is the protection of them against aging. In particular, the recent development of low-carrier-density bulk-insulating Bi$_2$Se$_3$ thin films and their sensitivity to air demands reliable capping layers to stabilize their electronic properties. Here, we study the stability of the low-carrier-density Bi$_2$Se$_3$ thin films in air with and without various capping layers using DC and THz probes. Without any capping layers, the carrier density increases by ~150% over a week and by ~280% over 9 months. In situ-deposited Se and ex situ-deposited Poly(methyl methacrylate) (PMMA) suppresses the aging effect to ~27% and ~88% respectively over 9 months. The combination of effective capping layers and low-carrier-density TI films will open up new opportunities in topological insulators.

cond-mat.mtrl-sci↗

arXiv2015

Topological Surface States Originated Spin-Orbit Torques in Bi2Se3

Three dimensional topological insulator bismuth selenide (Bi2Se3) is expected to possess strong spin-orbit coupling and spin-textured topological surface states, and thus exhibit a high charge to spin current conversion efficiency. We evaluate spin-orbit torques in Bi2Se3/Co40Fe40B20 devices at different temperatures by spin torque ferromagnetic resonance measurements. As temperature decreases, the spin-orbit torque ratio increases from ~ 0.047 at 300 K to ~ 0.42 below 50 K. Moreover, we observe a significant out-of-plane torque at low temperatures. Detailed analysis indicates that the origin of the observed spin-orbit torques is topological surface states in Bi2Se3. Our results suggest that topological insulators with strong spin-orbit coupling could be promising candidates as highly efficient spin current sources for exploring next generation of spintronic applications.

cond-mat.mtrl-sci↗

arXiv2015

Plasmon-phonon interactions in topological insulator rings

The great potential of Dirac electrons for plasmonics and photonics has been readily recognized after their discovery in graphene, followed by applications to smart optical devices. Dirac carriers are also found in topological insulators (TI) --quantum systems having an insulating gap in the bulk and intrinsic Dirac metallic states at the surface--. Here, we investigate the plasmonic response of ring structures patterned in Bi$_2$Se$_3$ TI films, which we investigate through terahertz (THz) spectroscopy. The rings are observed to exhibit a bonding and an antibonding plasmon modes, which we tune in frequency by varying their diameter. We develop an analytical theory based on the THz conductivity of unpatterned films, which accurately describes the strong plasmon-phonon hybridization and Fano interference experimentally observed as the bonding plasmon is swiped across the promineng 2\,THz phonon exhibited by this material. This work opens the road for the investigation of plasmons in topological insulators and for their application in tunable THz devices.

cond-mat.mtrl-sci↗

arXiv2014

Restoring Pristine Bi2Se3 Surface with an Effective Se Decapping Process

High quality thin films of topological insulators (TI) such as Bi2Se3 have been successfully synthesized by molecular beam epitaxy (MBE). Although the surface of MBE films can be protected by capping with inert materials such as amorphous Se, restoring an atomically clean pristine surface after decapping has never been demonstrated, which prevents in-depth investigations of the intrinsic properties of TI thin films with ex-situ tools. Using high resolution scanning tunneling microscopy/spectroscopy (STM/STS), we demonstrate a simple and highly reproducible Se decapping method that allows recovery of the pristine surface of extremely high quality Bi2Se3 thin films grown and capped with Se in a separate MBE system then exposed to atmosphere during transfer into the STM system. The crucial step of our decapping process is the removal of the surface contaminants on top of amorphous Se before thermal desorption of Se at a mild temperature (~210 °C). This effective Se decapping process opens up the possibility of ex-situ characterizations of pristine surfaces of interesting selenide materials and beyond using cutting-edge techniques.

cond-mat.mtrl-sci↗

arXiv2014

Observation of inverse spin Hall effect in bismuth selenide

Bismuth Selenide (Bi2Se3) is a topological insulator exhibiting helical spin polarization and strong spin-orbit coupling. The spin-orbit coupling links the charge current to spin current via the spin Hall effect (SHE). We demonstrate a Bi2Se3 spin detector by injecting the pure spin current from a magnetic permalloy layer to a Bi2Se3 thin film and detect the inverse SHE in Bi2Se3. The spin Hall angle of Bi2Se3 is found to be 0.0093 and the spin diffusion length in Bi2Se3 to be 6.2 nm at room temperature. Our results suggest that topological insulators with strong spin-orbit coupling can be used in functional spintronic devices.

cond-mat.mtrl-sci↗

arXiv2014

Transport Properties of Topological Insulators: Band Bending, Bulk Metal-to-Insulator Transition, and Weak Anti-Localization

We reanalyze some of the critical transport experiments and provide a coherent understanding of the current generation of topological insulators (TIs). Currently TI transport studies abound with widely varying claims of the surface and bulk states, often times contradicting each other, and a proper understanding of TI transport properties is lacking. According to the simple criteria given by Mott and Ioffe-Regel, even the best TIs are not true insulators in the Mott sense, and at best, are weakly-insulating bad metals. However, band-bending effects contribute significantly to the TI transport properties including Shubnikov de-Haas oscillations, and we show that utilization of this band-bending effect can lead to a Mott insulating bulk state in the thin regime. In addition, by reconsidering previous results on the weak anti-localization (WAL) effect with additional new data, we correct a misunderstanding in the literature and generate a coherent picture of the WAL effect in TIs.

cond-mat.mtrl-sci↗

arXiv2014

Robust topological surface states of Bi2Se3 thin films on amorphous SiO2/Si substrate and a large ambipolar gating effect

The recent emergence of topological insulators (TI) has spurred intensive efforts to grow TI thin films on various substrates. However, little is known about how robust the topological surface states (TSS) are against disorders and other detrimental effects originating from the substrates. Here, we report observation of a well-defined TSS on Bi2Se3 films grown on amorphous SiO2 (a-SiO2) substrates and a large gating effect on these films using the underneath doped-Si substrate as the back gate. The films on a-SiO2 were composed of c-axis ordered but random in-plane domains. However, despite the in-plane randomness induced by the amorphous substrate, the transport properties of these films were superior to those of similar films grown on single-crystalline Si(111) substrates, which are structurally better matched but chemically reactive with the films. This work sheds light on the importance of chemical compatibility, compared to lattice matching, for the growth of TI thin films, and also demonstrates that the technologically-important and gatable a-SiO2/Si substrate is a promising platform for TI films.

cond-mat.mtrl-sci↗

arXiv2014

Emergence of decoupled surface transport channels in bulk insulating Bi2Se3 thin films

In ideal topological insulator (TI) films the bulk state, which is supposed to be insulating, should not provide any electric coupling between the two metallic surfaces. However, transport studies on existing TI films show that the topological states on opposite surfaces are electrically tied to each other at thicknesses far greater than the direct coupling limit where the surface wavefunctions overlap. Here, we show that as the conducting bulk channels are suppressed, the parasitic coupling effect diminishes and the decoupled surface channels emerge as expected for ideal TIs. In Bi2Se3 thin films with fully suppressed bulk states, the two surfaces, which are directly coupled below ~10 QL, become gradually isolated with increasing thickness and are completely decoupled beyond ~20 QL. On such a platform, it is now feasible to implement transport devices whose functionality relies on accessing the individual surface layers without any deleterious coupling effects.

cond-mat.mtrl-sci↗

arXiv2014

Transferring MBE-grown topological insulator films to arbitrary substrates and Metal-insulator transition via Dirac gap

Mechanical exfoliation of bulk crystals has been widely used to obtain thin topological insulator (TI) flakes for device fabrication. However, such a process produces only micro-sized flakes that are highly irregular in shape and thickness. In this work, we developed a process to transfer the entire area of TI Bi2Se3 thin films grown epitaxially on Al2O3 and SiO2 to arbitrary substrates, maintaining their pristine morphology and crystallinity. Transport measurements show that these transferred films have lower carrier concentrations and comparable or higher mobilities than before the transfer. Furthermore, using this process we demonstrated a clear metal-insulator transition in an ultrathin Bi2Se3 film by gate-tuning its Fermi level into the hybridization gap formed at the Dirac point. The ability to transfer large area TI films to any substrate will facilitate fabrication of TI heterostructure devices, which will help explore exotic phenomena such as Majorana fermions and topological magnetoelectricity.

cond-mat.mtrl-sci↗