arXiv subjects

Matthias Scheffler

Publications and source records attributed to Matthias Scheffler.

At least 127 records · Page 7Linked to original sources

arXiv2009

Partial dissociation of water on Fe$_{3}$O$_{4}$(001): adsorbate induced charge and orbital order

The interaction of water with Fe$_3$O$_4$(001) is studied by density functional theory (DFT) calculations including an on-site Coulomb term. For isolated molecules dissociative adsorption is strongly promoted at surface defect sites, while at higher coverages a hydrogen-bonded network forms with alternating molecular and dissociated species. This mixed adsorption mode and a suppression of the $(\sqrt{2}\times \sqrt{2})R45^{\circ}$-reconstruction are confirmed by a quantitative low energy electron diffraction (LEED) analysis. Adsorbate induced electron transfer processes add a new dimension towards understanding the catalytic activity of magnetite(001).

cond-mat.mtrl-sci↗

arXiv2009

Experimental and theoretical study of oxygen adsorption structures on Ag(111)

The oxidized Ag(111) surface has been studied by a combination of experimental and theoretical methods, scanning tunneling microscopy (STM), x-ray photoelectron spectroscopy (XPS), and density functional theory (DFT). A large variety of different surface structures is found, depending on the detailed preparation conditions. The observed structures fall into four classes: (a) individually chemisorbed atomic oxygen atoms, (b) three different oxygen overlayer structures, including the well-known p(4 x 4) phase, formed from the same Ag$_6$ and Ag$_{10}$ building blocks, (c) a c(4 x 8) structure not previously observed, and (d) at higher oxygen coverages structures characterized by stripes along the high-symmetry directions of the Ag(111) substrate. Our analysis provides a detailed explanation of the atomic-scale geometry of the Ag$_6$/Ag$_{10}$ building block structures, and the c(4 x 8) and stripe structures are discussed in detail. The observation of many different and co-existing structures implies that the O/Ag(111) system is characterized by a significantly larger degree of complexity than previously anticipated, and this will impact our understanding of oxidation catalysis processes on Ag catalysts.

cond-mat.mtrl-sci↗

arXiv2009

Coupled cluster benchmarks of water monomers and dimers extracted from DFT liquid water: the importance of monomer deformations

To understand the performance of popular density-functional theory (DFT) exchange-correlation (xc) functionals in simulations of liquid water, water monomers and dimers were extracted from a PBE simulation of liquid water and examined with coupled cluster with single and double excitations plus a perturbative correction for connected triples [CCSD(T)]. CCSD(T) reveals that most of the dimers are unbound compared to two gas phase equilibrium water monomers, largely because monomers within the liquid have distorted geometries. Of the three xc functionals tested, PBE and BLYP systematically underestimate the cost of the monomer deformations and consequently predict too large dissociation energies between monomers within the dimers. This is in marked contrast to how these functionals perform for an equilibrium water dimer and other small water clusters in the gas phase, which only have moderately deformed monomers. PBE0 reproduces the CCSD(T) monomer deformation energies very well and consequently the dimer dissociation energies much more accurately than PBE and BLYP. Although this study is limited to water monomers and dimers, the results reported here may provide an explanation for the overstructured radial distribution functions routinely observed in BLYP and PBE simulations of liquid water and are of relevance to water in other phases and to other associated molecular liquids.

cond-mat.mtrl-sci↗

arXiv2009

Controlling polarization at insulating surfaces: quasiparticle calculations for molecules adsorbed on insulator films

By means of quasiparticle-energy calculations in the G0W0 approach, we show for the prototypical insulator/semiconductor system NaCl/Ge(001) that polarization effects at the interfaces noticeably affect the excitation spectrum of molecules adsorbed on the surface of the NaCl films. The magnitude of the effect can be controlled by varying the thickness of the film, offering new opportunities for tuning electronic excitations in e.g. molecular electronics or quantum transport. Polarization effects are visible even for the excitation spectrum of the NaCl films themselves, which has important implications for the interpretation of surface science experiments for the characterization of insulator surfaces.

cond-mat.mtrl-sci↗

arXiv2009

Thermodynamics of the Heusler alloy Co_2-xMn_1+xSi: a combined density functional theory and cluster expansion study

Previous studies indicated that intrinsic point defects play a crucial role for the density of states of ferromagnetic half-metals in the band gap region: At large concentrations, defect-derived bands might close the gap at the Fermi energy in the minority spin channel. In this work, structural disorder in the Co- and Mn-sublattices of the full Heusler alloy Co_2-xMn_1+xSi (-1 < x < 2) is investigated with a cluster expansion approach, parametrized using all-electron density functional theory calculations. By establishing two separate cluster expansions, one for the formation energy and one for the total spin moment, we are in position to determine the stability of different configurations, to predict new (also half-metallic) ground states and to extend the known Slater-Pauling rule for ideally stoichiometric Heusler alloys to non-stoichiometric, Mn-rich compositions. This enables us to identify potentially half-metallic structures in the Mn-rich region. With the help of Monte Carlo simulations based on the cluster expansion, we establish theoretically that Co_2-xMn_1+xSi close to the stoichiometric composition ought to show a high degree of structural order in thermodynamic equilibrium. Hence, samples prepared with the correct stoichiometry should indeed be half-metallic after thermal annealing. Moreover, we predict that adding a small amount of Mn to stoichiometric Co_2MnSi allows to suppress the thermally activated formation of detrimental Co antisites. At Mn-rich compositions (x>1), the ordered ground state structures predicted for zero temperature are found to be thermally unstable and to decompose into Co2MnSi and Mn3Si above room temperature.

cond-mat.mtrl-sci↗

arXiv2009

The f-electron challenge: localized and itinerant states in lanthanide oxides united by GW@LDA+U

Many-body perturbation theory in the GW approach is applied to lanthanide oxides, using the local-density approximation plus a Hubbard U correction (LDA+U) as the starting point. Good agreement between the G0W0 density of states and experimental spectra is observed for CeO2 and Ce2O3. Unlike the LDA+U method G0W0 exhibits only a weak dependence on U in a physically meaningful range of U values. For the whole lanthanide sesquioxide (Ln2O3) series G0W0@LDA+U reproduces the main features found for the optical experimental band gaps. The relative positions of the occupied and unoccupied f-states predicted by G0W0 confirm the experimental conjecture derived from phenomenological arguments.

cond-mat.mtrl-sci↗

arXiv2008

Defect Formation Energies without the Band-Gap Problem: Combining DFT and GW for the Silicon Self-Interstitial

We present an improved method to calculate defect formation energies that overcomes the band-gap problem of Kohn-Sham density-functional theory (DFT) and reduces the self-interaction error of the local-density approximation (LDA) to DFT. We demonstrate for the silicon self-interstitial that combining LDA with quasiparticle energy calculations in the G0W0 approach increases the defect formation energy of the neutral charge state by ~1.1 eV, which is in good agreement with diffusion Monte Carlo calculations (E. R. Batista et al. Phys. Rev. B 74, 121102(R) (2006), W.-K. Leung et al. Phys. Rev. Lett. 83, 2351 (1999)). Moreover, the G0W0-corrected charge transition levels agree well with recent measurements.

cond-mat.mtrl-sci↗

arXiv2008

Ag-Cu alloy surfaces in an oxidizing environment: a first-principles study

Recent experiments on model catalysts have shown that Ag-Cu alloys have improved selectivity with respect to pure silver for ethylene epoxidation. In this paper we review our first-principles investigations on the (111) surface of this alloy and present new findings on other low index surfaces. We find that, for every surface orientation, the presence of oxygen leads to copper segregation to the surface. Considering the alloy to be in equilibrium with an oxygen atmosphere and accounting for the effect of temperature and pressure, we compute the surface free energy and study the stability of several surface structures. Investigating the dependence of the surface free energy on the surface composition, we construct the phase diagram of the alloy for every surface orientation. Around the temperature, pressure and composition of interest for practical applications, we find that a limited number of structures can be present, including a thin layer of copper oxide on top of the silver surface and copper-free structures. Different surface orientations show a very similar behavior and in particular a single layer with CuO stoichiometry, significantly distorted when compared to a layer of bulk CuO, has a wide range of stability for all orientations. Our results are consistent with, and help explain, recent experimental measurements.

cond-mat.mtrl-sci↗

arXiv2008

On the accuracy of DFT exchange-correlation functionals for H bonds in small water clusters II: The water hexamer and van der Waals interactions

Second order Moeller-Plesset perturbation theory (MP2) at the complete basis set (CBS) limit and diffusion quantum Monte Carlo (DMC) are used to examine several low energy isomers of the water hexamer. Both approaches predict the so-called "prism" to be the lowest energy isomer, followed by "cage", "book", and "cyclic" isomers. The energies of the four isomers are very similar, all being within 10-15 meV/H2O. This reference data is then used to evaluate the performance of several density-functional theory (DFT) exchange-correlation (xc) functionals. A subset of the xc functionals tested for smaller water clusters [I: Santra et al., J. Chem. Phys. 127, 184104 (2007)] has been considered. Whilst certain functionals do a reasonable job at predicting the absolute dissociation energies of the various isomers (coming within 10-20 meV/H2O), none predict the correct energetic ordering of the four isomers, nor does any predict the correct low total energy isomer. All xc functionals tested either predict the book or cyclic isomers to have the largest dissociation energies. A many-body decomposition of the total interaction energies within the hexamers leads to the conclusion that the failure lies in the poor description of van der Waals (dispersion) forces in the xc functionals considered. It is shown that the addition of an empirical pairwise (attractive) C6/R6 correction to certain functionals allows for an improved energetic ordering of the hexamers. The relevance of these results to density-functional simulations of liquid water is also briefly discussed.

cond-mat.mtrl-sci↗

arXiv2008

Screening in 2D: GW calculations for surfaces and thin films using the repeated-slab approach

In the context of photoelectron spectroscopy, the $GW$ approach has developed into the method of choice for computing excitation spectra of weakly correlated bulk systems and their surfaces. To employ the established computational schemes that have been developed for three-dimensional crystals, two-dimensional systems are typically treated in the repeated-slab approach. In this work we critically examine this approach and identify three important aspects for which the treatment of long-range screening in two dimensions differs from the bulk: (1) anisotropy of the macroscopic screening (2) $\mathbf k$-point sampling parallel to the surface (3) periodic repetition and slab-slab interaction. For prototypical semiconductor (silicon) and ionic (NaCl) thin films we quantify the individual contributions of points (1) to (3) and develop robust and efficient correction schemes derived from the classic theory of dielectric screening.

cond-mat.mtrl-sci↗

arXiv2008

Examination of the concept of degree of rate control by first-principles kinetic Monte Carlo simulations

The conceptual idea of degree of rate control (DRC) approaches is to identify the "rate limiting step" in a complex reaction network by evaluating how the overall rate of product formation changes when a small change is made in one of the kinetic parameters. We examine two definitions of this concept by applying it to first-principles kinetic Monte Carlo simulations of the CO oxidation at RuO2(110). Instead of studying experimental data we examine simulations, because in them we know the surface structure, reaction mechanism, the rate constants, the coverage of the surface and the turn-over frequency at steady state. We can test whether the insights provided by the DRC are in agreement with the results of the simulations thus avoiding the uncertainties inherent in a comparison with experiment. We find that the information provided by using the DRC is non-trivial: It could not have been obtained from the knowledge of the reaction mechanism and of the magnitude of the rate constants alone. For the simulations the DRC provides furthermore guidance as to which aspects of the reaction mechanism should be treated accurately and which can be studied by less accurate and more efficient methods. We therefore conclude that a sensitivity analysis based on the DRC is a useful tool for understanding the propagation of errors from the electronic structure calculations to the statistical simulations in first-principles kinetic Monte Carlo simulations.

cond-mat.mtrl-sci↗

arXiv2008

CO oxidation on Pd(100) at technologically relevant pressure conditions: A first-principles kinetic Monte Carlo study

The possible importance of oxide formation for the catalytic activity of transition metals in heterogenous oxidation catalysis has evoked a lively discussion over the recent years. On the more noble transition metals (like Pd, Pt or Ag) the low stability of the common bulk oxides suggests primarily sub-nanometer thin oxide films, so-called surface oxides, as potential candidates that may be stabilized under gas phase conditions representative of technological oxidation catalysis. We address this issue for the Pd(100) model catalyst surface with first-principles kinetic Monte Carlo (kMC) simulations that assess the stability of the well-characterized (sqrt{5} x sqrt{5})R27 surface oxide during steady-state CO oxidation. Our results show that at ambient pressure conditions the surface oxide is stabilized at the surface up to CO:O2 partial pressure ratios just around the catalytically most relevant stoichiometric feeds (p(CO):p(O2) = 2:1). The precise value depends sensitively on temperature, so that both local pressure and temperature fluctuations may induce a continuous formation and decomposition of oxidic phases during steady-state operation under ambient stoichiometric conditions.

cond-mat.mtrl-sci↗

arXiv2008

Alloy surface segregation in reactive environments: A first-principles atomistic thermodynamics study of Ag3Pd(111) in oxygen atmospheres

We present a first-principles atomistic thermodynamics framework to describe the structure, composition and segregation profile of an alloy surface in contact with a (reactive) environment. The method is illustrated with the application to a Ag3Pd(111) surface in an oxygen atmosphere, and we analyze trends in segregation, adsorption and surface free energies. We observe a wide range of oxygen adsorption energies on the various alloy surface configurations, including binding that is stronger than on a Pd(111) surface and weaker than that on a Ag(111) surface. This and the consideration of even small amounts of non-stoichiometries in the ordered bulk alloy are found to be crucial to accurately model the Pd surface segregation occurring in increasingly O-rich gas phases.

cond-mat.mtrl-sci↗

arXiv2008

Consistent set of band parameters for the group-III nitrides AlN, GaN, and InN

We have derived consistent sets of band parameters (band gaps, crystal field-splittings, band gap deformation potentials, effective masses, Luttinger and EP parameters) for AlN, GaN, and InN in the zinc-blende and wurtzite phases employing many-body perturbation theory in the G0W0 approximation. The G0W0 method has been combined with density-functional theory (DFT) calculations in the exact-exchange optimized effective potential approach (OEPx) to overcome the limitations of local-density or gradient-corrected DFT functionals (LDA and GGA). The band structures in the vicinity of the Gamma-point have been used to directly parameterize a 4x4 k.p Hamiltonian to capture non-parabolicities in the conduction bands and the more complex valence-band structure of the wurtzite phases. We demonstrate that the band parameters derived in this fashion are in very good agreement with the available experimental data and provide reliable predictions for all parameters which have not been determined experimentally so far.

cond-mat.mtrl-sci↗

arXiv2007

First-principles investigation of Ag-Cu alloy surfaces in an oxidizing environment

In this paper we investigate by means of first-principles density functional theory calculations the (111) surface of the Ag-Cu alloy under varying conditions of pressure of the surrounding oxygen atmosphere and temperature. This alloy has been recently proposed as a catalyst with improved selectivity for ethylene epoxidation with respect to pure silver, the catalyst commonly used in industrial applications. Here we show that the presence of oxygen leads to copper segregation to the surface. Considering the surface free energy as a function of the surface composition, we construct the convex hull to investigate the stability of various surface structures. By including the dependence of the free surface energy on the oxygen chemical potential, we are able compute the phase diagram of the alloy as a function of temperature, pressure and surface composition. We find that, at temperature and pressure typically used in ethylene epoxidation, a number of structures can be present on the surface of the alloy, including clean Ag(111), thin layers of copper oxide and thick oxide-like structures. These results are consistent with, and help explain, recent experimental results.

cond-mat.mtrl-sci↗

arXiv2007

Non-adiabatic Effects in the Dissociation of Oxygen Molecules at the Al(111) Surface

The measured low initial sticking probability of oxygen molecules at the Al(111) surface that had puzzled the field for many years was recently explained in a non-adiabatic picture invoking spin-selection rules [J. Behler et al., Phys. Rev. Lett. 94, 036104 (2005)]. These selection rules tend to conserve the initial spin-triplet character of the free O2 molecule during the molecule's approach to the surface. A new locally-constrained density-functional theory approach gave access to the corresponding potential-energy surface (PES) seen by such an impinging spin-triplet molecule and indicated barriers to dissociation which reduce the sticking probability. Here, we further substantiate this non-adiabatic picture by providing a detailed account of the employed approach. Building on the previous work, we focus in particular on inaccuracies in present-day exchange-correlation functionals. Our analysis shows that small quantitative differences in the spin-triplet constrained PES obtained with different gradient-corrected functionals have a noticeable effect on the lowest kinetic energy part of the resulting sticking curve.

cond-mat.mtrl-sci↗

arXiv2007

On how good DFT exchange-correlation functionals are for H bonds in small water clusters: Benchmarks approaching the complete basis set limit

The ability of several density-functional theory (DFT) exchange-correlation functionals to describe hydrogen bonds in small water clusters (dimer to pentamer) in their global minimum energy structures is evaluated with reference to second order Moeller Plesset perturbation theory (MP2). Errors from basis set incompleteness have been minimized in both the MP2 reference data and the DFT calculations, thus enabling a consistent systematic evaluation of the true performance of the tested functionals. Among all the functionals considered, the hybrid X3LYP and PBE0 functionals offer the best performance and among the non-hybrid GGA functionals mPWLYP and PBE1W perform the best. The popular BLYP and B3LYP functionals consistently underbind and PBE and PW91 display rather variable performance with cluster size.

cond-mat.mtrl-sci↗

arXiv2007

Ultrathin oxides: bulk-oxide-like model surfaces or unique films?

To better understand the electronic and chemical properties of wide-gap oxide surfaces at the atomic scale, experimental work has focused on epitaxial films on metal substrates. Recent findings show that these films are considerably thinner than previously thought. This raises doubts about the transferability of the results to surface properties of thicker films and bulk crystals. By means of density-functional theory and approximate GW corrections for the electronic spectra we demonstrate for three characteristic wide-gap oxides (silica, alumina, and hafnia) the influence of the substrate and highlight critical differences between the ultrathin films and surfaces of bulk materials. Our results imply that monolayer-thin oxide films have rather unique properties.

cond-mat.mtrl-sci↗