arXiv subjects

Matthias Scheffler

Publications and source records attributed to Matthias Scheffler.

At least 163 records · Page 9Linked to original sources

arXiv2003

On the thermodynamic stability of PdO surfaces

As a first step towards understanding the morphology of PdO crystals we performed a systematic full-potential density-functional theory study of all possible 1 x 1 terminations of the low-index surfaces of tetragonal PdO. Applying the concept of first-principles atomistic thermodynamics we analyze the composition, structure and stability of these PdO orientations in equilibrium with an arbitrary oxygen environment. Within the studied subset of 1 x 1 geometries the polar PdO-terminated PdO(100) orientation turns out to be surprisingly stable over the whole range of experimentally accessible gas phase conditions. Setting up a constrained Wulff construction within the compiled data set, this PdO(100)-PdO facet correspondingly dominates the obtained polyhedron by far. The real PdO crystallite shape will however likely be affected by surface reconstructions, which are not covered by the present study.

cond-mat.mtrl-sci↗

arXiv2003

Hydrogen adsorption at RuO2(110)

The structural, vibrational, energetic and electronic properties of hydrogen at the stoichiometric RuO2(110) termination are studied using density functional theory. The oxide surface is found to stabilize both molecular and dissociated H2. The most stable configuration in form of hydroxyl groups (monohydrides) at the undercoordinated O^br surface anions is at low temperatures accessed via a molecular state at the undercoordinated Ru^cus atoms (dihydrogen) and a second precursor in form of a water-like species (dihydride) at the O^br sites. This complex picture of the low-temperature dissociation kinetics of H2 at RuO2(110) is in agreement with existing data from high-resolution energy-loss spectroscopy and temperature programmed desorption. Hydrogen adsorption at O^br sites increases the reactivity of the neighboring Ru^cus sites, which are believed to be the active sites in catalytic oxidation reactions.

cond-mat.mtrl-sci↗

arXiv2003

Insights into the function of silver as an oxidation catalyst by ab initio, atomistic thermodynamics

To help understand the high activity of silver as an oxidation catalyst, e.g., for the oxidation of ethylene to epoxide and the dehydrogenation of methanol to formaldehyde, the interaction and stability of oxygen species at the Ag(111) surface has been studied for a wide range of coverages. Through calculation of the free energy, as obtained from density-functional theory and taking into account the temperature and pressure via the oxygen chemical potential, we obtain the phase diagram of O/Ag(111). Our results reveal that a thin surface-oxide structure is most stable for the temperature and pressure range of ethylene epoxidation and we propose it (and possibly other similar structures) contains the species actuating the catalysis. For higher temperatures, low coverages of chemisorbed oxygen are most stable, which could also play a role in oxidation reactions. For temperatures greater than about 775 K there are no stable oxygen species, except for the possibility of O atoms adsorbed at under-coordinated surface sites Our calculations rule out thicker oxide-like structures, as well as bulk dissolved oxygen and molecular ozone-like species, as playing a role in the oxidation reactions.

cond-mat.mtrl-sci↗

arXiv2003

Why is a noble metal catalytically active? The role of the O-Ag interaction in the function of silver as an oxidation catalyst

Extensive density-functional theory calculations, and taking into account temperature and pressure, affords a comprehensive picture of the behavior and interaction of oxygen and Ag(111), and provides valuable insight into the function of silver as an oxidation catalyst. The obtained phase-diagram reveals the most stable species present in a given environment and thus identifies (and excludes) possibly active oxygen species. In particular, for the conditions of ethylene epoxidation, a thin oxide-like structure is most stable, suggesting that such atomic O species are actuating the catalysis, in contrast to hitherto proposed molecular-like species.

cond-mat.mtrl-sci↗

arXiv2003

Oxide formation at the surface of late 4d transition metals: Insights from first-principles atomistic thermodynamics

Using density-functional theory we assess the stability of bulk and surface oxides of the late 4d transition metals in a ``constrained equilibrium'' with a gas phase formed of O2 and CO. While the stability range of the most stable bulk oxide extends for ruthenium well into gas phase conditions representative of technological CO oxidation catalysis, this is progressively less so for the 4d metals to its right in the periodic system. Surface oxides could nevertheless still be stable under such conditions. These thermodynamic considerations are discussed in the light of recent experiments, emphasizing the role of (surface) oxides as the active phase of model catalysts formed from these metals.

cond-mat.mtrl-sci↗

arXiv2003

Sub-surface Oxygen and Surface Oxide Formation at Ag(111): A Density-functional Theory Investigation

To help provide insight into the remarkable catalytic behavior of the oxygen/silver system for heterogeneous oxidation reactions, purely sub-surface oxygen, and structures involving both on-surface and sub-surface oxygen, as well as oxide-like structures at the Ag(111) surface have been studied for a wide range of coverages and adsorption sites using density-functional theory. Adsorption on the surface in fcc sites is energetically favorable for low coverages, while for higher coverage a thin surface-oxide structure is energetically favorable. This structure has been proposed to correspond to the experimentally observed (4x4) phase. With increasing O concentrations, thicker oxide-like structures resembling compressed Ag2O(111) surfaces are energetically favored. Due to the relatively low thermal stability of these structures, and the very low sticking probability of O2 at Ag(111), their formation and observation may require the use of atomic oxygen (or ozone, O3) and low temperatures. We also investigate diffusion of O into the sub-surface region at low coverage (0.11 ML), and the effect of surface Ag vacancies in the adsorption of atomic oxygen and ozone-like species. The present studies, together with our earlier investigations of on-surface and surface-substitutional adsorption, provide a comprehensive picture of the behavior and chemical nature of the interaction of oxygen and Ag(111), as well as of the initial stages of oxide formation.

cond-mat.mtrl-sci↗

arXiv2003

Effect of a humid environment on the surface structure of RuO2(110)

Combining density-functional theory and thermodynamics we compute the phase diagram of surface structures of rutile RuO2 (110) in equilibrium with water vapor in the complete range of experimentally accessible gas phase conditions. Through the formation of hydroxyl or water-like groups, already lowest concentrations of hydrogen in the gas phase are sufficient to stabilize an oxygen-rich polar oxide termination even at very low oxygen pressure.

cond-mat.mtrl-sci↗

arXiv2003

Composition and structure of the RuO2(110) surface in an O2 and CO environment: implications for the catalytic formation of CO2

The phase diagram of surface structures for the model catalyst RuO2(110) in contact with a gas environment of O2 and CO is calculated by density-functional theory and atomistic thermodynamics. Adsorption of the reactants is found to depend crucially on temperature and partial pressures in the gas phase. Assuming that a catalyst surface under steady-state operation conditions is close to a constrained thermodynamic equilibrium, we are able to rationalize a number of experimental findings on the CO oxidation over RuO2(110). We also calculated reaction pathways and energy barriers. Based on the various results the importance of phase coexistence conditions is emphasized as these will lead to an enhanced dynamics at the catalyst surface. Such conditions may actuate an additional, kinetically controlled reaction mechanism on RuO2(110).

cond-mat.mtrl-sci↗

arXiv2002

Adsorption of Xe atoms on metal surfaces: New insights from first-principles calculations

The adsorption of rare gases on metal surfaces serve as the paradigm of weak adsorption where it is typically assumed that the adsorbate occupies maximally coordinated hollow sites. Density-functional theory calculations using the full-potential linearized augmented plane wave method for Xe adatoms on Mg(0001), Al(111), Ti(0001), Cu(111), Pd(111), and Pt(111), show, however, that Xe prefers low-coordination on-top sites in all cases. We identify the importance of polarization and a site-dependent Pauli repulsion in actuating the site preference and the principle nature of the rare-gas atom--metal surface interaction.

cond-mat.mtrl-sci↗

arXiv2002

First-principles, atomistic thermodynamics for oxidation catalysis

Present knowledge of the function of materials is largely based on studies (experimental and theoretical) that are performed at low temperatures and ultra-low pressures. However, the majority of everyday applications, like e.g. catalysis, operate at atmospheric pressures and temperatures at or higher than 300 K. Here we employ ab initio, atomistic thermodynamics to construct a phase diagram of surface structures in the (T,p)-space from ultra-high vacuum to technically-relevant pressures and temperatures. We emphasize the value of such phase diagrams as well as the importance of the reaction kinetics that may be crucial e.g. close to phase boundaries.

cond-mat.mtrl-sci↗

arXiv2002

Quasiparticle Calculations for Point Defects on Semiconductor Surfaces

We discuss the implementation of quasiparticle calculations for point defects on semiconductor surfaces and, as a specific example, present an ab initio study of the electronic structure of the As vacancy in the +1 charge state on the GaAs(110) surface. The structural properties are calculated with the plane-wave pseudopotential method, and the quasiparticle energies are obtained from Hedin's GW approximation. Our calculations show that the 1a" vacancy state in the band gap is shifted from 0.06 to 0.65 eV above the valence-band maximum after the self-energy correction to the Kohn-Sham eigenvalues. The GW result is in close agreement with a recent surface photovoltage imaging measurement.

cond-mat.mtrl-sci↗

arXiv2002

Stability of sub-surface oxygen at Rh(111)

Using density-functional theory (DFT) we investigate the incorporation of oxygen directly below the Rh(111) surface. We show that oxygen incorporation will only commence after nearly completion of a dense O adlayer (θ_tot = 1.0 monolayer) with O in the fcc on-surface sites. The experimentally suggested octahedral sub-surface site occupancy, inducing a site-switch of the on-surface species from fcc to hcp sites, is indeed found to be a rather low energy structure. Our results indicate that at even higher coverages oxygen incorporation is followed by oxygen agglomeration in two-dimensional sub-surface islands directly below the first metal layer. Inside these islands, the metastable hcp/octahedral (on-surface/sub-surface) site combination will undergo a barrierless displacement, introducing a stacking fault of the first metal layer with respect to the underlying substrate and leading to a stable fcc/tetrahedral site occupation. We suggest that these elementary steps, namely, oxygen incorporation, aggregation into sub-surface islands and destabilization of the metal surface may be more general and precede the formation of a surface oxide at close-packed late transition metal surfaces.

cond-mat.mtrl-sci↗

arXiv2002

First-principles study of nucleation, growth, and interface structure of Fe/GaAs

We use density-functional theory to describe the initial stages of Fe film growth on GaAs(001), focusing on the interplay between chemistry and magnetism at the interface. Four features appear to be generic: (1) At submonolayer coverages, a strong chemical interaction between Fe and substrate atoms leads to substitutional adsorption and intermixing. (2) For films of several monolayers and more, atomically abrupt interfaces are energetically favored. (3) For Fe films over a range of thicknesses, both Ga- and As-adlayers dramatically reduce the formation energies of the films, suggesting a surfactant-like action. (4) During the first few monolayers of growth, Ga or As atoms are likely to be liberated from the interface and diffuse to the Fe film surface. Magnetism plays an important auxiliary role for these processes, even in the dilute limit of atomic adsorption. Most of the films exhibit ferromagnetic order even at half-monolayer coverage, while certain adlayer-capped films show a slight preference for antiferromagnetic order.

cond-mat.mtrl-sci↗

arXiv2001

Metastable precursors during the oxidation of the Ru(0001) surface

Using density-functional theory, we predict that the oxidation of the Ru(0001) surface proceeds via the accumulation of sub-surface oxygen in two-dimensional islands between the first and second substrate layer. This leads locally to a decoupling of an O-Ru-O trilayer from the underlying metal. Continued oxidation results in the formation and stacking of more of these trilayers, which unfold into the RuO_2(110) rutile structure once a critical film thickness is exceeded. Along this oxidation pathway, we identify various metastable configurations. These are found to be rather close in energy, indicating a likely lively dynamics between them at elevated temperatures, which will affect the surface chemical and mechanical properties of the material.

cond-mat.mtrl-sci↗

arXiv2001

Composition, structure and stability of RuO_2(110) as a function of oxygen pressure

Using density-functional theory (DFT) we calculate the Gibbs free energy to determine the lowest-energy structure of a RuO_2(110) surface in thermodynamic equilibrium with an oxygen-rich environment. The traditionally assumed stoichiometric termination is only found to be favorable at low oxygen chemical potentials, i.e. low pressures and/or high temperatures. At realistic O pressure, the surface is predicted to contain additional terminal O atoms. Although this O excess defines a so-called polar surface, we show that the prevalent ionic model, that dismisses such terminations on electrostatic grounds, is of little validity for RuO_2(110). Together with analogous results obtained previously at the (0001) surface of corundum-structured oxides, these findings on (110) rutile indicate that the stability of non-stoichiometric terminations is a more general phenomenon on transition metal oxide surfaces.

cond-mat.mtrl-sci↗

arXiv2001

Surface Core-Level Shifts at an oxygen-rich Ru Surface: O/Ru(0001) vs. RuO_2(110)

We present density-functional theory calculations of Ru 3d and O 1s surface core-level shifts (SCLSs) at an oxygen-rich Ru(0001) surface, namely for the O(1x1)/Ru(0001) chemisorption phase and for two surface terminations of fully oxidized RuO_2(110). Including final-state effects, the computed SCLSs can be employed for the analysis of experimental X-ray photoelectron spectroscopy (XPS) data enabling a detailed study of the oxidation behaviour of the Ru(0001) surface. We show that certain peaks can be used as a fingerprint for the existence of the various phases and propose that the long disputed satellite peak in RuO_2(110) XPS data originates from a hitherto unaccounted surface termination.

cond-mat.mtrl-sci↗

arXiv2001

Effect of strain on surface diffusion in semiconductor heteroepitaxy

We present a first-principles analysis of the strain renormalization of the cation diffusivity on the GaAs(001) surface. For the example of In/GaAs(001)-c(4x4) it is shown that the binding of In is increased when the substrate lattice is expanded. The diffusion barrier ΔE(e) has a non-monotonic strain dependence with a maximum at compressive strain values (e < 0), while being a decreasing function for any tensile strain (e > 0) studied. We discuss the consequences of spatial variations of both the binding energy and the diffusion barrier of an adatom caused by the strain field around a heteroepitaxial island. For a simplified geometry, we evaluate the speed of growth of two coherently strained islands on the GaAs(001) surface and identify a growth regime where island sizes tend to equalize during growth due to the strain dependence of surface diffusion.

cond-mat.mtrl-sci↗

arXiv2001

Exchange-correlation kernels for excited states in solids

The performance of several common approximations for the exchange-correlation kernel within time-dependent density-functional theory is tested for elementary excitations in the homogeneous electron gas. Although the adiabatic local-density approximation gives a reasonably good account of the plasmon dispersion, systematic errors are pointed out and traced to the neglect of the wavevector dependence. Kernels optimized for atoms are found to perform poorly in extended systems due to an incorrect behavior in the long-wavelength limit, leading to quantitative deviations that significantly exceed the experimental error bars for the plasmon dispersion in the alkali metals.

cond-mat.mtrl-sci↗