arXiv subjects

Mattias Beck

Publications and source records attributed to Mattias Beck.

At least 55 records · Page 3Linked to original sources

arXiv2021

Femtosecond pulses from a mid-infrared quantum cascade laser

The quantum cascade laser (QCL) has evolved to be a compact, powerful source of coherent mid-infrared (mid-IR) light. However, its fast gain dynamics strongly restricts the formation of ultrashort pulses. As such, the shortest pulses reported so far were limited to a few picoseconds with some hundreds of milliwatts of peak power, strongly narrowing their applicability for time-resolved and nonlinear experiments. Here, we demonstrate an alternative approach capable of producing near-transform-limited sub-picosecond pulses with several watts of peak power. Starting from a frequency modulated phase-locked state, which most efficiently exploits the gain of the active region, ultrashort high peak power pulses are generated via external pulse compression. We assess their temporal nature by means of a novel optical sampling method, coherent beat note interferometry and interferometric autocorrelation. These results open new pathways for nonlinear physics in the mid-infrared.

physics.optics↗

arXiv2021

Breakdown of the topological protection by cavity vacuum fields in the integer quantum Hall effect

The control of the electronic properties of materials via the vacuum fields of cavity electromagnetic resonators is one of the emerging frontiers of condensed matter physics. We show here that the enhancement of vacuum field fluctuations in subwavelength split-ring resonators dramatically affects arguably one of the most paradigmatic quantum protectorates, namely the quantum Hall electron transport in high-mobility 2D electron gases. The observed breakdown of the topological protection of the integer quantum Hall effect is interpreted in terms of a long-range cavity-mediated electron hopping where the anti-resonant terms of the light-matter coupling finally result into a finite resistivity induced by the vacuum fluctuations. The present experimental platform can be used for any 2D material and provides new ways to manipulate electron phases in matter thanks to vacuum-field engineering

cond-mat.mes-hall↗

arXiv2021

Regenerative Terahertz Quantum Detectors

Because of the ultrafast and photon-driven nature of the transport in their active region, we demonstrate that quantum cascade lasers can be operated as resonantly amplified terahertz detectors. Tunable responsivities up to 50 V/W and noise equivalent powers down to 100 pW/sqrt(Hz) are demonstrated at 4.7 THz. Constant peak responsivities with respect to the detector temperature are observed up to 80K. Thanks to the sub-ps intersubband lifetime electrical bandwidths larger than 20 GHz can be obtained, allowing the detection of optical beatnotes from quantum cascade THz frequency combs.

physics.optics↗

arXiv2021

Dissipative Kerr solitons in semiconductor ring lasers

Dissipative Kerr solitons are self-organized optical waves arising from the interplay between Kerr effect and dispersion. They can form spontaneously in nonlinear microresonators pumped with an external continuous-wave laser, which provides the parametric gain for the proliferation of an ultrastable frequency comb. These miniaturized and battery driven microcombs have become a disruptive technology for precision metrology, broadband telecommunication and ultrafast optical ranging. In this work, we report on the first experimental observation of dissipative Kerr solitons generated in a ring cavity with a fast semiconductor gain medium. The moderate quality factor of the ring cavity is compensated by the giant resonant Kerr nonlinearity of a quantum cascade laser, which is more than a million times larger than in Si3N4. By engineering the dispersion of the cavity, we observe the formation of bright dissipative Kerr solitons in the mid-infrared range. Soliton formation appears after an abrupt symmetry breaking between the two lasing directions of the ring cavity. The pump field of the soliton is generated by direct electrical driving and closely resembles the soliton Cherenkov radiation observed in passive microcombs. Two independent techniques shed light on the waveform and coherence of the solitons and confirm a pulse width of approximately 3 ps. Our results extend the spectral range of soliton microcombs to mid-infrared wavelengths and will lead to integrated, battery driven and turnkey spectrometers in the molecular fingerprint region.

physics.optics↗

arXiv2021

Controlling Quantum Cascade Laser Optical Frequency Combs through Microwave Injection

In this work, control over the precise state emitted by quantum cascade laser frequency combs through strong radio-frequency current modulation close to their repetition frequency is demonstrated. In particular, broadening of the spectrum from about 20 cm$^{-1}$ to 60cm$^{-1}$ can be achieved throughout most of the current dynamical range while preserving the coherence, as measured by shifted wave interference Fourier transform spectroscopy (SWIFTS). The required modulation frequency to achieve this broadening is red-shifted compared to the free-running beatnote frequency at increasing modulation powers starting from 25 dBm, whereas the range where it occurs narrows. Outside of this maximum-bandwidth range, the spectral bandwidth of the laser output is gradually reduced and the new center frequency is red- or blue-shifted, directly dependent on the detuning of the modulation frequency. By switching between two modulation frequencies detuned symmetrically with respect to the free-running beatnote, we can generate two multiplexed spectral regions with negligible overlap from the same device at rates of at least 20 kHz. In the time-domain we show with both SWIFTS and interferometric autocorrelation (IAC) measurements a transition from quasi-continuous output to pulsed ($τ_p \approx 55$ ps) output by ramping up the injection power to 35 dBm.

physics.optics↗

arXiv2021

Ultra-low threshold lasing through phase front engineering via a metallic circular aperture

Semiconductor lasers with ultra-low thresholds and minimal footprints are a topic of active research. Such devices require a combination of high quality factor laser cavities with small active region volumes, which drives the quest for novel cavity geometries exploiting nano-optic concepts. For high-reflectivity coated ridge lasers, where light is tightly confined in the waveguide, a low threshold can only be achieved by strongly reducing the diffraction losses arising at the laser facet. We show here that, somewhat counter-intuitively, opening a carefully designed aperture in a metallic facet coating can simultaneously enhance both its transmission and modal reflectivity by correcting the phase front at the subwavelength scale. Numerical simulations and experimental results demonstrate a reduction of optical mirror loss by up to 40% while the transmission is increased by four orders of magnitude. Applying this approach to both facets of a short cavity quantum cascade laser, we achieve laser operation at room temperature with an electrical dissipation of only 143 mW. Such light sources are especially suitable for portable and battery-operated chemical agent sensing applications operating in the mid-infrared wavelength range, where multiple greenhouse and pollutant gases have their fundamental absorption lines. Our work suggests possibilities for further applications including frequency comb dispersion engineering, and can be implemented in a broad range of optoelectronic systems.

physics.optics↗

arXiv2021

Self-starting Harmonic Comb Emission in THz Quantum Cascade Lasers

Harmonic comb state has proven to be emerging in quantum cascade lasers and promoted by an interplay between parametric gain and spatial hole burning. We report here on robust, pure, self-starting harmonic mode locking in Copper-based double-metal THz quantum cascade lasers. Different harmonic orders can be excited in the same laser cavity depending on the pumping condition and stable harmonic combs spanning more than 600 GHz bandwidth at 80 K are reported. Such devices can be RF injected and the free running coherence is assessed by means of self-mixing technique performed at 50 GHz. A theoretical model based on Maxwell-Bloch equations including an asymmetry in the gain profile is used to interpret the data.

physics.optics↗

arXiv2021

Polaritonic non-locality in ultrastrong light-matter coupling

Sub-wavelength electromagnetic field localization has been central in photonic research in the last decade, allowing to enhance sensing capabilities as well as increasing the coupling between photons and material excitations. The ultrastrong light-matter coupling regime in the THz range with split-ring resonators coupled to magnetoplasmons has been widely investigated, achieving successive world-records for the largest light-matter coupling ever achieved. Ever shrinking resonators have allowed to approach the regime of few electrons strong coupling, in which single-dipole properties can be modified by the vacuum field. Here we demonstrate, theoretically and experimentally, the existence of a limit to the possibility of arbitrarily increasing electromagnetic confinement in polaritonic systems. Strongly sub-wavelength fields can excite a continuum of high-momenta propagative magnetoplasmons. This leads to peculiar nonlocal polaritonic effects, as certain polaritonic features disappear and the system enters in the regime of bound-to-continuum strong coupling. Emerging nonlinearities due to the local breaking of Kohn's theorem are also reported.

cond-mat.mes-hall↗

arXiv2021

THz intersubband electroluminescence from n-type Ge/SiGe quantum cascade structures

We report electroluminescence originating from L-valley transitions in n-type Ge/Si$_{0.15}$Ge$_{0.85}$ quantum cascade structures centered at 3.4 and 4.9 THz with a line broadening of $Δf/f \approx 0.2$. Three strain-compensated heterostructures, grown on a Si substrate by ultrahigh vacuum chemical vapor deposition, have been investigated. The design is based on a single quantum well active region employing a vertical optical transition and the observed spectral features are well described by non-equilibrium Green's function calculations. The presence of two peaks highlights a suboptimal injection in the upper state of the radiative transition. Comparison of the electroluminescence spectra with similar GaAs/AlGaAs structure yields one order of magnitude lower emission efficiency.

physics.optics↗

arXiv2020

Mid-infrared quantum cascade laser frequency combs with a microstrip-like line waveguide geometry

In this work, a design for a mid-infrared quantum cascade laser (QCL) frequency comb source that enhances the high frequency response and the comb characteristics of the device is presented . A state-of-the-art active region (AR), grown on a heavily n-doped InP:Si substrate, was processed into a buried heterostructure with a microstrip-like line waveguide. As a result, the repetition rate frequency $f_{rep}$, around 11.09 GHz, can be locked to an injected narrow-linewidth radio frequency (RF) signal, over a range of more than 200 kHz with -10 dBm of injected power, which outperforms normal buried heterostructure schemes by an order of magnitude. Moreover, under RF injection at powers higher than 20 dBm, the lasing spectrum is flattened and significantly broadened, from 24 $cm^{-1}$ to 65 $cm^{-1}$ in bandwidth, while at the same time the coherence of the comb is maintained and verified.

physics.optics↗

arXiv2020

Mid-infrared quantum cascade laser frequency combs based on multi-section waveguides

We present quantum cascade laser (QCL) frequency comb devices with engineered waveguides for managing the dispersion. The QCL waveguide consists of multiple sections with different waveguide widths. The narrow and wide sections of the waveguide are designed in a way to compensate the group velocity dispersion (GVD) of each other and thereby produce a flat and slightly negative GVD for the QCL. The QCL exhibits continuous comb operation over a large part of the dynamic range of the laser. Strong and narrow-linewidth intermode beatnotes are achieved in more than 300 mA wide operation current range. The comb device features also considerably high output power (>380 mW) and wide optical bandwidth (>55 cm-1)

physics.optics↗

arXiv2020

An antipodal Vivaldi antenna for improved far-field properties and polarization manipulation of broadband terahertz quantum cascade lasers

We present an antipodal Vivaldi antenna for broadband double metal waveguide terahertz quantum cascade lasers and frequency combs. Its exponentially curved flare profile results in an adiabatic in-plane mode expansion, producing an improved far-field with a single-lobed beam of (23°x19°) full width half maximum with an octave-spanning bandwidth. The antenna also acts as a wave retarder, rotating the polarization from vertical toward horizontal polarization by a frequency-dependent angle. The laser's emission spectrum and current-voltage characteristics are not affected, as well as frequency comb operation. Measurements agree well with numerical simulations, and the proposed antenna covers a broad spectral range (1.5-4.5 THz).

physics.optics↗

arXiv2020

Topological charge of finite-size photonic crystal modes

Topological charges are the winding numbers of polarization vectors around the vortex centers of far-field radiation. In this work, the topological charge of photonic crystal modes is theoretically analyzed using an envelope function approach. A group of modes is discovered with unique polarization properties dictated by their non-trivial envelope functions. Experimentally, lasing operation on such mode is demonstrated in an electrically pumped mid-infrared photonic crystal surface-emitting laser with high slope efficiency. The topological charge is directly observed from the polarization properties of single-mode laser emission.

physics.optics↗

arXiv2019

Landau polaritons in highly non-parabolic 2D gases in the ultra-strong coupling regime

We probe ultra-strong light matter coupling between metallic terahertz metasurfaces and Landau-level transitions in high mobility 2D electron and hole gases. We utilize heavy-hole cyclotron resonances in strained Ge and electron cyclotron resonances in InSb quantum wells, both within highly non-parabolic bands, and compare our results to well known parabolic AlGaAs/GaAs quantum well (QW) systems. Tuning the coupling strength of the system by two methods, lithographically and by optical pumping, we observe a novel behavior clearly deviating from the standard Hopfield model previously verified in cavity quantum electrodynamics: an opening of a lower polaritonic gap.

cond-mat.mes-hall↗

arXiv2019

High-resolution and gapless dual comb spectroscopy with current-tuned quantum cascade lasers

We present gapless, high-resolution absorption and dispersion spectra obtained with quantum cascade laser frequency combs covering 55 cm$^{-1}$. Using phase-sensitive dual comb design, the comb lines are gradually swept over 10 GHz, corresponding to the free spectral range of the laser devices, by applying a current modulation. We show that with interleaving the spectral point spacing is reduced by more than four orders of magnitude over the full spectral span of the frequency comb. The potential of this technique for high-precision gas sensing is illustrated by measuring the low pressure (107 hPa) absorption and dispersion spectra of methane spanning the range of 1170 cm$^{-1}$ - 1225 cm$^{-1}$ with a resolution of 0.001 cm$^{-1}$.

physics.app-ph↗

arXiv2019

Photon-driven broadband emission and RF injection locking of THz quantum cascade laser frequency combs

We present homogeneous quantum cascade lasers (QCLs) emitting around 3 THz which display bandwidths up to 950 GHz with a single stable beatnote. Devices are spontaneously operating in a harmonic comb state, and when in a dense mode regime they can be injection locked at the cavity roundtrip frequency with very small RF powers down to -55 dBm. When operated in the electrically unstable region of negative differential resistance, the device displays ultra-broadband operation exceeding 1.83 THz ($Δf/f=50\%$) with high phase noise, exhibiting self-sustained, periodic voltage oscillations. The low CW threshold (115 A$\cdot$ cm$^{-2}$) and broadband comb operation ($Δf/f=25\%$) make these sources extremely appealing for on-chip frequency comb applications.

physics.optics↗

arXiv2019

Thermoelectrically cooled THz quantum cascade laser operating up to 210 K

We present a \MF{terahertz} quantum cascade laser operating on a thermoelectric cooler up to a record-high temperature of 210.5 K. The active region design is based on only two quantum wells and achieves high temperature operation thanks to a systematic optimization by means of a nonequilibrium Green's function model. Laser spectra were measured with a room temperature detector, making the whole setup cryogenic free. At low temperatures ($\sim 40 K), a maximum output power of 200 mW was measured.

physics.optics↗

arXiv2019

Pulses from a mid-infrared quantum cascade laser frequency comb using an external compressor

A Martinez-type stretcher-compressor is used to modify the spectral phases of a high-power (~1 W) QCL comb emitted at 8.2 μm with more than 100 cm-1 spectral bandwidth. Using this scheme, we demonstrate a compression of the QCL output from a 134 ps continuous wave waveform, to a train of pulses of width 12 ps, and a power with peak to average ratio of 40.7. An evaluation of the phase noise of the free-running device yields an integrated timing jitter of 335 fs over the frequency range 20 kHz - 100 MHz, and a pulse-to-pulse jitter of 2.0 fs.

physics.optics↗