arXiv subjects

Mattias Beck

Publications and source records attributed to Mattias Beck.

At least 73 records · Page 4Linked to original sources

arXiv2019

Retrieval of phase relation and emission profile of quantum cascade laser frequency combs

The major development recently undergone by quantum cascade lasers has effectively extended frequency comb emission to longer-wavelength spectral regions, i.e. the mid and far infrared. Unlike classical pulsed frequency combs, their mode-locking mechanism relies on four-wave mixing nonlinear processes, with a temporal intensity profile different from conventional short-pulses trains. Measuring the absolute phase pattern of the modes in these combs enables a thorough characterization of the onset of mode-locking in absence of short-pulses emission, as well as of the coherence properties. Here, by combining dual-comb multi-heterodyne detection with Fourier-transform analysis, we show how to simultaneously acquire and monitor over a wide range of timescales the phase pattern of a generic frequency comb. The technique is applied to characterize a mid-infrared and a terahertz quantum cascade laser frequency comb, conclusively proving the high degree of coherence and the remarkable long-term stability of these sources. Moreover, the technique allows also the reconstruction of electric field, intensity profile and instantaneous frequency of the emission.

physics.optics↗

arXiv2018

Room temperature surface emission on large-area photonic crystal quantum cascade lasers

We design and fabricate large-area (1.1 mm $\times$ 1.1 mm) photonic crystal quantum cascade lasers, enabling single-mode (wavelength $\sim$ 8.5 $μ$m) surface emission at room temperature, with a maximum peak power up to 176 mW. The beam divergence is $< 1 ^{\circ}$ and without side-lobes. Moreover, by introducing asymmetry into the photonic crystal pillar shape, a single-lobed far-field is realized. The photonic band structure is measured with high spectral (0.72 cm$^{-1}$) and angular (0.1 $^{\circ}$) resolution by using the photonic crystal quantum cascade laser itself as a detector.

physics.optics↗

arXiv2018

Coexisting frequency combs spaced by an octave in a monolithic quantum cascade laser

Quantum cascade lasers are proving to be instrumental in the development of compact frequency comb sources at mid-infrared and terahertz frequencies. Here we demonstrate a heterogeneous terahertz quantum cascade laser with two active regions spaced exactly by one octave. Both active regions are based on a four-quantum well laser design and they emit a combined 3~mW peak power at 15~K in pulsed mode. The two central frequencies are 2.3~THz (bandwidth 300~GHz) and 4.6~THz (bandwidth 270~GHz). The structure is engineered in a way that allows simultaneous operation of the two active regions in the comb regime, serving as a double comb source as well as a test bench structure for all waveguide internal self-referencing techniques. Narrow RF beatnotes ($\sim$ 15~kHz) are recorded showing the simultaneous operation of the two combs, whose free-running coherence properties are investigated by means of beatnote spectroscopy performed both with an external detector and via self-mixing. Comb operation in a highly dispersive region (4.6~THz) relying only on gain bandwidth engineering shows the potential for broad spectral coverage with compact comb sources.

physics.optics↗

arXiv2018

Magneto-transport controlled by Landau polariton states

Hybrid excitations, called polaritons, emerge in systems with strong light-matter coupling. Usually, they dominate the linear and nonlinear optical properties with applications in quantum optics. Here, we show the crucial role of the electronic component of polaritons in the magneto-transport of a cavity-embedded 2D electron gas in the ultrastrong coupling regime. We show that the linear dc resistivity is significantly modified by the coupling to the cavity even without external irradiation. Our observations confirm recent predictions of vacuum-induced modification of the resistivity. Furthermore, photo-assisted transport in presence of a weak irradiation field at sub-THz frequencies highlights the different roles of localized and delocalized states.

quant-ph↗

arXiv2018

An electrically pumped phonon-polariton laser

We report a device that provides coherent emission of phonon polaritons, a mixed state between photons and optical phonons in an ionic crystal. An electrically pumped GaInAs/AlInAs quantum cascade structure provides intersubband gain into the polariton mode at = 26.3 μm, allowing self-oscillations close to the longitudinal optical phonon energy of AlAs. Because of the large computed phonon fraction of the polariton of 65%, the emission appears directly on a Raman spectrum measurement exhibiting a Stokes and anti-Stokes component with the expected shift of 48 meV.

physics.app-ph↗

arXiv2018

Evidence of Linear Chirp in Mid-Infrared Quantum Cascade Lasers

We measure the inter-modal phase relation of a quantum cascade laser frequency comb operating at 8 um using a coherent beatnote spectroscopy. We find these phases to be reproducible after cycling the power of the device, and to be smoothly varying with driving current. Moreover, these phases describe a comb state exhibiting a simple, linear chirp, which in fact corresponds to the lowest state of chirp to minimise the amplitude modulation, as required for combs driven by four wave mixing in a gain medium with a short gain recovery lifetime.

physics.optics↗

arXiv2017

Coupled-waveguides for dispersion compensation in semiconductor lasers

The generation of optical frequency combs via direct electrical pumping of semiconductor lasers is an attractive alternative to the well-established mode-locked laser sources in terms of compactness, robustness and integrability. However, the high chromatic dispersion of bulk semiconductor materials can prevent the generation of frequency combs or lead to undesired pulse lengthening. In this letter, we present a novel dual waveguide for intracavity dispersion compensation in semiconductor lasers. We apply the concept to a short mid-infrared wavelength quantum cascade laser operating in the first atmospheric window (λ$ \approx$ 4.6 μm). As a result, stable comb operation on the full dynamical range is achieved in this device. Unlike previously proposed schemes, the dual waveguide approach can be applied to various types of semiconductor lasers and material systems. In particular, it could enable efficient group velocity dispersion compensation at near-infrared wavelengths where semiconductor materials exhibit a large value of that parameter.

physics.optics↗

arXiv2017

Room temperature 9 $μ$m photodetectors and GHz heterodyne receivers

Room temperature operation is mandatory for any optoelectronics technology which aims to provide low-cost compact systems for widespread applications. In recent years, an important technological effort in this direction has been made in bolometric detection for thermal imaging$^1$, which has delivered relatively high sensitivity and video rate performance ($\sim$ 60 Hz). However, room temperature operation is still beyond reach for semiconductor photodetectors in the 8-12 $μ$m wavelength band$^2$, and all developments for applications such as imaging, environmental remote sensing and laser-based free-space communication$^{3-5}$ have therefore had to be realised at low temperatures. For these devices, high sensitivity and high speed have never been compatible with high temperature operation$^{6, 7}$. Here, we show that a 9 $μ$m quantum well infrared photodetector$^8$, implemented in a metamaterial made of subwavelength metallic resonators$^{9-12}$, has strongly enhanced performances up to room temperature. This occurs because the photonic collection area is increased with respect to the electrical area for each resonator, thus significantly reducing the dark current of the device$^{13}$. Furthermore, we show that our photonic architecture overcomes intrinsic limitations of the material, such as the drop of the electronic drift velocity with temperature$^{14, 15}$, which constrains conventional geometries at cryogenic operation$^6$. Finally, the reduced physical area of the device and its increased responsivity allows us, for the first time, to take advantage of the intrinsic high frequency response of the quantum detector$^7$ at room temperature. By beating two quantum cascade lasers$^{16}$ we have measured the heterodyne signal at high frequencies up to 4 GHz.

physics.app-ph↗

arXiv2017

Broadband monolithic extractor for metal-metal waveguide based terahertz quantum cascade laser frequency combs

We present a monolithic solution to extract efficiently light from terahertz quantum cascade lasers with metal-metal waveguides suitable for broadband frequency comb applications. The design is optimized for a bandwidth of 500 GHz around a center frequency of 2.6 THz. A five-fold increase in total output power is observed compared to standard metal-metal waveguides. The extractor features a single-lobed far-field pattern and increases the frequency comb dynamical range to cover more than 50 % of the laser dynamic range. Frequency comb operation up to a spectral bandwidth of 670 GHz is achieved.

physics.optics↗

arXiv2017

Intensity autocorrelation measurements of quantum cascade laser frequency combs in the Terahertz range

We report on the first direct measurement of the emission character of quantum cascade laser based frequency combs, using intensity autocorrelation. The correlation technique is based on fast electro-optic sampling, with a bandwidth optimized to match the emission spectra of the comb laser, centered around 2.5~THz. We find the output light to be amplitude and frequency modulated at the same time, with intensity modulation depth as high as 90\%, occuring on timescales as short as few picoseconds. We compare these findings with intensity autocorrelation measurements of pulsed Terahertz light originating from a photoconductive antenna and find very different results. We observe no significant difference for the comb and dispersed regime. The technique will be of significant importance in future for the measurement of ultra-short pulses from quantum cascade lasers.

physics.ins-det↗

arXiv2016

Ultra-broadband quantum cascade laser operating from 1.88 to 3.82 THz

We report on a heterogeneous active region design for terahertz quantum cascade laser based frequency combs. Dynamic range, spectral bandwidth as well as output power have been significantly improved with respect to previous designs. When operating individually the lasers act as a frequency comb up to a spectral bandwidth of 1.1 THz, while in a dispersed regime a bandwidth up to 1.94 THz at a center frequency of 3 THz can be reached. A self-detected dual-comb setup has been used to verify the frequency comb nature of the lasers.

physics.optics↗

arXiv2016

Measuring intensity correlations of a THz quantum cascade laser around its threshold at sub-cycle timescales

The quantum nature of photonic systems is reflected in the photon statistics of the light they emit. Therefore, the development of quantum optics tools with single photon sensitivity and excellent temporal resolution is paramount to the development of exotic sources, and is particularly challenging in the THz range where photon energies approach kbT at T=300 K. Here, we report on the first room temperature measurement of field g1(τ) and intensity correlations g2(τ) in the THz range with sub-cycle temporal resolution (146 fs) over the bandwidth 0.3-3 THz, based on electro-optic sampling. With this system, we are able to measure the photon statistics at threshold of a THz Quantum Cascade Laser.

physics.optics↗

arXiv2016

THz ultrastrong light-matter coupling

Cavity photon resonators with ultrastrong light-matter interactions are attracting interest both in semiconductor and superconducting systems displaying the capability to manipulate the cavity quantum electrodynamic ground state with controllable physical properties. Here we review a series of experiments aimed at probing the ultrastrong light-matter coupling regime, where the vacuum Rabi splitting $Ω$ is comparable to the bare transition frequency $ω$ . We present a new platform where the inter-Landau level transition of a two-dimensional electron gas (2DEG) is strongly coupled to the fundamental mode of deeply subwavelength split-ring resonators operating in the mm-wave range. Record-high values of the normalized light-matter coupling ratio $\fracΩω= 0.89$ are reached and the system appears highly scalable far into the microwave range.

physics.optics↗

arXiv2016

A quantum cascade phonon-polariton laser

We report a laser that coherently emits phonon-polaritons, quasi-particles arising from the coupling between photons and transverse optical phonons. The gain is provided by an intersubband transition in a quantum cascade structure. The polaritons at h$ν$ = 45.4meV (corresponding to an emission frequency of 10.4THz) are formed by the transverse AlAs phonon mode of monolayer thin AlInAs layers coupled to the optical modes of a Fabry-Perot cavity. The frequency location of the laser mode is in good agreement with the computed polaritonic dispersion and allows to quantify the constituent fractions of the emitted polaritons that reach a maximum of 50% for the phonon fraction. A fraction of the gain (between 2-5%) originates directly from the coupling between the intersubband and the phonon polarizations. The device exhibits a very low temperature dependence of its threshold current, as well as the capability to operate in very thin ($λ/20$) optical cavities.

physics.optics↗

arXiv2016

Short pulse generation and mode control of broadband terahertz quantum cascade lasers

We report on a waveguide engineering technique that enables the generation of a bandwidth up to 1 THz and record ultra-short pulse length of 2.5 ps in injection seeded terahertz quantum cascade lasers. The reported technique is able to control and fully suppress higher order lateral modes in broadband terahertz quantum cascade lasers by introducing side-absorbers to metal-metal waveguides. The side-absorbers consist of a top metalization set-back with respect to the laser ridge and an additional lossy metal layer. In continuous wave operation the side-absorbers lead to octave spanning laser emission, ranging from 1.63 to 3.37 THz, exhibiting a 725 GHz wide at top within a 10 dB intensity range as well as frequency comb operation with a bandwidth of 442 GHz. Numerical and experimental studies have been performed to optimize the impact of the side-absorbers on the emission properties and to determine the required increase of waveguide losses. Furthermore, these studies have led to a better understanding of the pulse formation dynamics of injection-seeded quantum cascade lasers.

physics.optics↗

arXiv2016

On-chip, self-detected THz dual-comb spectrometer

We present a directly generated on-chip dual-comb source at THz frequencies. The multi-heterodyne beating signal of two free-running THz quantum cascade laser frequency combs is measured electrically using one of the combs as a detector, fully exploiting the unique characteristics of quantum cascade active regions. Up to 30 modes can be detected corresponding to a spectral bandwidth of 630 GHz, being the available bandwidth of the dual comb configuration. The multi-heterodyne signal is used to investigate the equidistance of the comb modes showing an accuracy of $10^{-12}$ at the carrier frequency of 2.5 THz.

physics.optics↗

arXiv2015

Sub-cycle measurement of intensity correlations in the Terahertz range

The Terahertz frequency range bears intriguing opportunities, beyond very advanced applications in spectroscopy and matter control. Peculiar quantum phenomena are predicted to lead to light emission by non-trivial mechanisms. Typically, such emission mechanisms are unraveled by temporal correlation measurements of photon arrival times, as demonstrated in their pioneering work by Hanbury Brown and Twiss. So far, the Terahertz range misses an experimental implementation of such technique with very good temporal properties and high sensitivity. In this paper, we propose a room-temperature scheme to measure photon correlations at THz frequencies based on electro-optic sampling. The temporal resolution of 146 fs is faster than one cycle of oscillation and the sensitivity is so far limited to ~1500 photons. With this technique, we measure the photon statistics of a THz quantum cascade laser. The proposed measurement scheme allows, in principle, the measurement of ultrahigh bandwidth photons and paves the way towards THz quantum optics.

quant-ph↗

arXiv2015

Quantum Cascade Laser Frequency Combs

It was recently demonstrated that broadband quantum cascade lasers can operate as frequency combs. As such, they operate under direct electrical pumping at both mid-infrared and THz frequencies, making them very attractive for dual-comb spectroscopy. Performance levels are continuously improving, with average powers over 100 mW and frequency coverage of 100 cm$^{-1}$ in the mid-infrared. In the THz range, 10 mW of average power and 600 GHz of frequency coverage are reported. As a result of the very short upper state lifetime of the gain medium, the mode proliferation in these sources arises from four wave mixing rather than saturable absorption. As a result, their optical output is characterized by the tendency of small intensity modulation of the output power, and the relative phases of the modes to be similar to the ones of a frequency modulated laser. Recent results include the proof of comb operation down to a metrological level, the observation of a Schawlow-Townes broadened linewidth, as well as the first dual-comb spectroscopy measurements. The capability of the structure to integrate monolithically non-linear optical element as well as to operate as a detector show great promise for future chip integration of dual-comb systems.

physics.optics↗