arXiv subjects

Maurizio Quadrio

Publications and source records attributed to Maurizio Quadrio.

51 records · Page 3Linked to original sources

arXiv2014

Numerical simulation of turbulent duct flows with constant power input

The numerical simulation of a flow through a duct requires an externally specified forcing that makes the fluid flow against viscous friction. To this aim, it is customary to enforce a constant value for either the flow rate (CFR) or the pressure gradient (CPG). When comparing a laminar duct flow before and after a geometrical modification that induces a change of the viscous drag, both approaches (CFR and CPG) lead to a change of the power input across the comparison. Similarly, when carrying out the (DNS and LES) numerical simulation of unsteady turbulent flows, the power input is not constant over time. Carrying out a simulation at constant power input (CPI) is thus a further physically sound option, that becomes particularly appealing in the context of flow control, where a comparison between control-on and control-off conditions has to be made. We describe how to carry out a CPI simulation, and start with defining a new power-related Reynolds number, whose velocity scale is the bulk flow that can be attained with a given pumping power in the laminar regime. Under the CPI condition, we derive a relation that is equivalent to the Fukagata--Iwamoto--Kasagi relation valid for CFR (and to its extension valid for CPG), that presents the additional advantage of natively including the required control power. The implementation of the CPI approach is then exemplified in the standard case of a plane turbulent channel flow, and then further applied to a flow control case, where the spanwise-oscillating wall is used for skin friction drag reduction. For this low-Reynolds number flow, using 90% of the available power for the pumping system and the remaining 10% for the control system is found to be the optimum share that yields the largest increase of the flow rate above the reference case, where 100% of the power goes to the pump.

physics.flu-dyn↗

arXiv2013

Performance losses of drag-reducing spanwise forcing at moderate values of the Reynolds number

A fundamental problem in the field of turbulent skin-friction drag reduction is to determine the performance of the available control techniques at high values of the Reynolds number $Re$. We consider active, predetermined strategies based on spanwise forcing (oscillating wall and streamwise-traveling waves applied to a plane channel flow), and explore via Direct Numerical Simulations (DNS) up to $Re_τ=2100$ the rate at which their performance deteriorates as $Re$ is increased. To be able to carry out a comprehensive parameter study, we limit the computational cost of the simulations by adjusting the size of the computational domain in the homogeneous directions, compromising between faster computations and the increased need of time-averaging the fluctuating space-mean wall shear-stress. Our results, corroborated by a few full-scale DNS, suggest a scenario where drag reduction degrades with $Re$ at a rate that varies according to the parameters of the wall forcing. In agreement with already available information, keeping them at their low-$Re$ optimal value produces a relatively quick decrease of drag reduction. However, at higher $Re$ the optimal parameters shift towards other regions of the parameter space, and these regions turn out to be much less sensitive to $Re$. Once this shift is accounted for, drag reduction decreases with $Re$ at a markedly slower rate. If the slightly favorable trend of the energy required to create the forcing is considered, a chance emerges for positive net energy savings also at large values of the Reynolds number.

physics.flu-dyn↗

arXiv2013

Prediction of turbulence control for arbitrary periodic spanwise wall movement

In order to generalize the well-known spanwise-oscillating-wall technique for drag reduction, non-sinusoidal oscillations of a solid wall are considered as a means to alter the skin-friction drag in a turbulent channel flow. A series of Direct Numerical Simulations is conducted to evaluate the control performance of nine different temporal waveforms, in addition to the usual sinusoid, systematically changing the wave amplitude and the period for each waveform. The turbulent average spanwise motion is found to coincide with the laminar Stokes solution that is constructed, for the generic waveform, through harmonic superposition. This allows us to define and compute, for each waveform, a new penetration depth of the Stokes layer which correlates with the amount of turbulent drag reduction, and eventually to predict both turbulent drag reduction and net energy saving rate for arbitrary waveforms. Among the waveforms considered, the maximum net energy saving rate is obtained by the sinusoidal wave at its optimal amplitude and period. However, the sinusoid is not the best waveform at every point in the parameter space. Our predictive tool offers simple guidelines to design waveforms that outperform the sinusoid for given (suboptimal) amplitude and period of oscillation. This is potentially interesting in view of applications, where physical limitations often preclude the actuator to reach its optimal operating conditions.

physics.flu-dyn↗

arXiv2013

A perturbative model for predicting the high-Reynolds-number behaviour of the streamwise travelling waves technique in turbulent drag reduction

The background of this work is the problem of reducing the aerodynamic turbulent friction drag, which is an important source of energy waste in innumerable technological fields. We develop a theoretical framework aimed at predicting the behaviour of existing drag reduction techniques when used at the large values of Re which are typical of applications. We focus on one recently proposed and very promising technique, which consists in creating at the wall streamwise-travelling waves of spanwise velocity. A perturbation analysis of the Navier-Stokes equations that govern the fluid motion is carried out, for the simplest wall-bounded flow geometry, i.e. the plane channel flow. The streamwise base flow is perturbed by the spanwise time-varying base flow induced by the travelling waves. An asymptotic expansion is then carried out with respect to the velocity amplitude of the travelling wave. The analysis, although based on several assumptions, leads to predictions of drag reduction that agree well with the measurements available in literature and mostly computed through DNS of the full Navier-Stokes equations. New DNS data are produced on purpose in this work to validate our method further. The method is then applied to predict the drag-reducing performance of the streamwise-travelling waves at increasing Re, where comparison data are not available. The current belief, based on a Re-range of about one decade only above the transitional value, that drag reduction obtained at low Re is deemed to decrease as Re is increased is fully confirmed by our results. From a quantitative standpoint, however, our outlook based on several decades of increase in Re is much less pessimistic than other existing estimates, and motivates further, more accurate studies on the present subject.

physics.flu-dyn↗

arXiv2012

Money versus Time: Evaluation of Flow Control in Terms of Energy Consumption and Convenience

Flow control with the goal of reducing the skin friction drag on the fluid-solid interface is an active fundamental research area, motivated by its potential for significant energy savings and reduced emissions in the transport sector. Customarily, the performance of drag reduction techniques in internal flows is evaluated under two alternative flow conditions, i.e. at constant mass flow rate or constant pressure gradient. Successful control leads to reduction of drag and pumping power within the former approach, whereas the latter leads to an increase of the mass flow rate and pumping power. In practical applications, however, money and time define the flow control challenge: a compromise between the energy expenditure (money) and the corresponding convenience (flow rate) achieved with that amount of energy has to be reached so as to accomplish a goal which in general depends on the specific application. Based on this idea, we derive two dimensionless parameters which quantify the total energy consumption and the required time (convenience) for transporting a given volume of fluid through a given duct. Performances of existing drag reduction strategies as well as the influence of wall roughness are re-evaluated within the present framework; how to achieve the (application-dependent) optimum balance between energy consumption and convenience is addressed. It is also shown that these considerations can be extended to external flows.

physics.flu-dyn↗

arXiv2012

Changes in turbulent dissipation in a channel flow with oscillating walls

Harmonic oscillations of the walls of a turbulent plane channel flow are studied by direct numerical simulations to improve our understanding of the physical mechanism for skin-friction drag reduction. The simulations are carried out at constant pressure gradient in order to define an unambiguous inner scaling: in this case, drag reduction manifests itself as an increase of mass flow rate. Energy and enstrophy balances, carried out to emphasize the role of the oscillating spanwise shear layer, show that the viscous dissipations of the mean flow and of the turbulent fluctuations increase with the mass flow rate, and the relative importance of the latter decreases. We then focus on the turbulent enstrophy: through an analysis of the temporal evolution from the beginning of the wall motion, the dominant, oscillation-related term in the turbulent enstrophy is shown to cause the turbulent dissipation to be enhanced in absolute terms, before the slow drift towards the new quasi-equilibrium condition. This mechanism is found to be responsible for the increase in mass flow rate. We finally show that the time-average volume integral of the dominant term relates linearly to the drag reduction.

physics.flu-dyn↗

arXiv2011

Very fine near-wall structures in scalar mixing

Passive scalar dynamics in wall-bounded turbulence is studied via Direct Numerical Simulations of plane channel flow, for a friction Reynolds number $Re_* = 160$ and a Schmidt number $Sc=1$. Peculiar to the present research is that the spatial resolution reaches far beyond what has been employed in similar past studies. Our aim is to examine the statistics of the most dissipative events across the various layers of the channel flow, and to compare them to the homogeneous isotropic case, where the recent studies by Schumacher et al (2005) and Watanabe and Gotoh (2007) have described a range of scalar micro-scales that require extremely high spatial resolution to be properly resolved. Resolution effects are observed on integral-scale quantities such as the mean profiles of the scalar dissipation and its variance. By examining probability distributions, it is found that the finest resolution is essential for correctly computing small-scale statistics in the near-wall region of the channel. As expected, this high-resolution requirement extends outwards to the channel centerline, where the behavior of isotropic turbulence is recovered. However, high-intensity scalar dissipation events are overemphasized by marginal resolution near the wall, while they are underemphasized in the central region.

physics.flu-dyn↗

arXiv2010

DNS-based measurement of the mean impulse response of homogeneous isotropic turbulence

A technique for measuring the mean impulse response function of stationary homogeneous isotropic turbulence is proposed. Such measurement is carried out here on the basis of Direct Numerical Simulation (DNS). A zero-mean white-noise volume forcing is used to probe the turbulent flow, and the response function is obtained by accumulating the space-time correlation between the white forcing and the velocity field. This technique to measure the turbulent response in a DNS numerical experiment is a new research tool in that field of spectral closures where the linear response concept is invoked either by resorting to renormalized perturbations theories or by introducing the well-known Fluctuation-Dissipation Relation (FDR). Though the results obtained in the present work are limited to relatively low values of the Reynolds number, a preliminary analysis is possible. Both the characteristic form and the time scaling properties of the response function are investigated in the universal subrange of dissipative wavenumbers; a comparison with the response approximation given by the FDR is proposed through the independent DNS measurement of the correlation function. Very good agreement is found between the measured response and Kraichnan's description of random energy-range advection effects.

physics.flu-dyn↗

arXiv2010

The laminar generalized Stokes layer and turbulent drag reduction

This paper considers plane channel flow modified by waves of spanwise velocity applied at the wall and travelling along the streamwise direction. Laminar and turbulent regimes for the streamwise flow are both studied. When the streamwise flow is laminar, it is unaffected by the spanwise flow induced by the waves. This flow is a thin, unsteady and streamwise-modulated boundary layer that can be expressed in terms of the Airy function of the first kind. We name it the generalized Stokes layer because it reduces to the classical oscillating Stokes layer in the limit of infinite wave speed. When the streamwise flow is turbulent, the laminar generalized Stokes layer solution describes well the space-averaged turbulent spanwise flow, provided that the phase speed of the waves is sufficiently different from the turbulent convection velocity, and that the time scale of the forcing is smaller than the life time of the near-wall turbulent structures. Under these conditions, the drag reduction is found to scale with the Stokes layer thickness, which renders the laminar solution instrumental for the analysis of the turbulent flow. A classification of the turbulent flow regimes induced by the waves is presented by comparing parameters related to the forcing conditions with the space and time scales of the turbulent flow.

physics.flu-dyn↗

arXiv2010

Experimental assessment of drag reduction by traveling waves in a turbulent pipe flow

We experimentally assess the capabilities of an active, open-loop technique for drag reduction in turbulent wall flows recently introduced by Quadrio et al. [J. Fluid Mech., v.627, 161, (2009)]. The technique consists in generating streamwise-modulated waves of spanwise velocity at the wall, that travel in the streamwise direction. A proof-of-principle experiment has been devised to measure the reduction of turbulent friction in a pipe flow, in which the wall is subdivided into thin slabs that rotate independently in the azimuthal direction. Different speeds of nearby slabs provide, although in a discrete setting, the desired streamwise variation of transverse velocity. Our experiment confirms the available DNS results, and in particular demonstrates the possibility of achieving large reductions of friction in the turbulent regime. Reductions up to 33% are obtained for slowly forward-traveling waves; backward-traveling waves invariably yield drag reduction, whereas a substantial drop of drag reduction occurs for waves traveling forward with a phase speed comparable to the convection speed of near-wall turbulent structures. A Fourier analysis is employed to show that the first harmonics introduced by the discrete spatial waveform that approximates the sinusoidal wave are responsible for significant effects that are indeed observed in the experimental measurements. Practical issues related to the physical implementation of this control scheme and its energetic efficiency are briefly discussed.

physics.flu-dyn↗

arXiv2009

Streamwise oscillation of spanwise velocity at the wall of a channel for turbulent drag reduction

Steady forcing at the wall of a channel flow is studied via DNS to assess its ability of yielding reductions of turbulent friction drag. The wall forcing consists of a stationary distribution of spanwise velocity that alternates in the streamwise direction. The idea behind the forcing builds upon the existing technique of the spanwise wall oscillation, and exploits the convective nature of the flow to achieve an unsteady interaction with turbulence. The analysis takes advantage of the equivalent laminar flow, that is solved analytically to show that the energetic cost of the forcing is unaffected by turbulence. In a turbulent flow, the alternate forcing is found to behave similarly to the oscillating wall; in particular an optimal wavelength is found that yields a maximal reduction of turbulent drag. The energetic performance is significantly improved, with more than 50% of maximum friction saving at large intensities of the forcing, and a net energetic saving of 23% for smaller intensities. Such a steady, wall-based forcing may pave the way to passively interacting with the turbulent flow to achieve drag reduction through a suitable distribution of roughness, designed to excite a selected streamwise wavelength.

physics.flu-dyn↗

arXiv2008

Wall-oscillation conditions for drag reduction in turbulent channel flow

The drag reduction properties of a turbulent channel flow modified by spanwise sinusoidal oscillations of the walls are investigated by direct numerical simulations. The work is based on the linear relation between the drag reduction and the parameter $S$, function of the maximum wall velocity and the period of the oscillation. This quantity has been found through physical arguments pertaining to the action of the oscillating Stokes layer on the near-wall turbulence dynamics. The predictive potential of the scaling parameter is exploited to gain insight into the drag-reducing effects of the oscillating wall technique. The period of oscillation which guarantees the maximum drag reduction for a given maximum wall displacement is studied for the first time. The issue of the minimum intensity of wall forcing required to produce a non-zero drag reduction effect and the dependence of the drag reduction on the Reynolds number are also addressed. The drag reduction data available in the literature are compared with the prediction given by the scaling parameter, thus attaining a comprehensive view of the state of the art.

physics.flu-dyn↗

arXiv2007

Direct Numerical Simulation of turbulent Taylor-Couette flow

The direct numerical simulation (DNS) of the Taylor--Couette flow in the fully turbulent regime is described. The numerical method extends the work by Quadrio & Luchini (Eur. J. Mech. B / Fluids, v.21, pp.413--427, 2002), and is based on a parallel computer code which uses mixed spatial discretization (spectral schemes in the homogeneous directions, and fourth-order, compact explicit finite-difference schemes in the radial direction). A DNS is carried out to simulate for the first time the turbulent Taylor--Couette flow in the turbulent regime. Statistical quantities are computed to complement the existing experimental information, with a view to compare it to planar, pressure-driven turbulent flow at the same value of the Reynolds number. The main source for differences in flow statistics between plane and curved-wall flows is attributed to the presence of large-scale rotating structures generated by curvature effects.

physics.flu-dyn↗

arXiv2006

The phase-locked mean impulse response of a turbulent channel flow

We describe the first DNS-based measurement of the complete mean response of a turbulent channel flow to small external disturbances. Space-time impulsive perturbations are applied at one channel wall, and the linear response describes their mean effect on the flow field as a function of spatial and temporal separations. The turbulent response is shown to differ from the response a laminar flow with the turbulent mean velocity profile as base flow.

physics.flu-dyn↗

arXiv2005

A low-cost parallel implementation of direct numerical simulation of wall turbulence

A numerical method for the direct numerical simulation of incompressible wall turbulence in rectangular and cylindrical geometries is presented. The distinctive feature resides in its design being targeted towards an efficient distributed-memory parallel computing on commodity hardware. The adopted discretization is spectral in the two homogeneous directions; fourth-order accurate, compact finite-difference schemes over a variable-spacing mesh in the wall-normal direction are key to our parallel implementation. The parallel algorithm is designed in such a way as to minimize data exchange among the computing machines, and in particular to avoid taking a global transpose of the data during the pseudo-spectral evaluation of the non-linear terms. The computing machines can then be connected to each other through low-cost network devices. The code is optimized for memory requirements, which can moreover be subdivided among the computing nodes. The layout of a simple, dedicated and optimized computing system based on commodity hardware is described. The performance of the numerical method on this computing system is evaluated and compared with that of other codes described in the literature, as well as with that of the same code implementing a commonly employed strategy for the pseudo-spectral calculation.

physics.flu-dyn↗