arXiv subjects

Max C. Lemme

Publications and source records attributed to Max C. Lemme.

At least 37 records · Page 2Linked to original sources

arXiv2024

Volatile MoS${_2}$ Memristors with Lateral Silver Ion Migration for Artificial Neuron Applications

Layered two-dimensional (2D) semiconductors have shown enhanced ion migration capabilities along their van der Waals (vdW) gaps and on their surfaces. This effect can be employed for resistive switching (RS) in devices for emerging memories, selectors, and neuromorphic computing. To date, all lateral molybdenum disulfide (MoS${_2}$)-based volatile RS devices with silver (Ag) ion migration have been demonstrated using exfoliated, single-crystal MoS${_2}$ flakes requiring a forming step to enable RS. Here, we present volatile RS with multilayer MoS${_2}$ grown by metal-organic chemical vapor deposition (MOCVD) with repeatable forming-free operation. The devices show highly reproducible volatile RS with low operating voltages of approximately 2 V and fast switching times down to 130 ns considering their micrometer scale dimensions. We investigate the switching mechanism based on Ag ion surface migration through transmission electron microscopy, electronic transport modeling, and density functional theory. Finally, we develop a physics-based compact model and explore the implementation of our volatile memristors as artificial neurons in neuromorphic systems.

physics.app-ph↗

arXiv2024

Tunable Doping and Mobility Enhancement in 2D Channel Field-Effect Transistors via Damage-Free Atomic Layer Deposition of AlOX Dielectrics

Two-dimensional materials (2DMs) have been widely investigated because of their potential for heterogeneous integration with modern electronics. However, several major challenges remain, such as the deposition of high-quality dielectrics on 2DMs and the tuning of the 2DM doping levels. Here, we report a scalable plasma-enhanced atomic layer deposition (PEALD) process for direct deposition of a nonstoichiometric aluminum oxide (AlOX) dielectric, overcoming the damage issues associated with conventional methods. Furthermore, we control the thickness of the dielectric layer to systematically tune the doping level of 2DMs. The experimental results demonstrate successful deposition without detectable damage, as confirmed by Raman spectroscopy and electrical measurements. Our method enables tuning of the Dirac and threshold voltages of back-gated graphene and MoS${_2}$ field-effect transistors (FETs), respectively, while also increasing the charge carrier mobility in both device types. We further demonstrate the method in top-gated MoS${_2}$ FETs with double-stack dielectric layers (AlOX+Al${_2}$O${_3}$), achieving critical breakdown field strengths of 7 MV/cm and improved mobility compared with the back gate configuration. In summary, we present a PEALD process that offers a scalable and low-damage solution for dielectric deposition on 2DMs, opening new possibilities for precise tuning of device characteristics in heterogeneous electronic circuits.

physics.app-ph↗

arXiv2024

Multiparameter admittance spectroscopy for investigating defects in MoS${_2}$ thin film MOSFETs

A method for assessing the quality of electronic material properties of thin-film metal oxide semiconductor field-effect transistors (MOSFETs) is presented. By investigating samples with MOCVD-grown MoS${_2}$ channels exposed to atmospheric conditions, the existence of electron traps in MoS${_2}$ and at the interface between the gate insulator and the thin-film MoS${_2}$ are revealed. Differential conductance and capacitance data of the transistor channels are plotted as 3D surfaces on a base plane spanned by the measurement frequency versus the gate voltage. The existence of defects is confirmed by comparison with ideal results from a theoretical model.

physics.app-ph↗

arXiv2024

Hardware Realization of Neuromorphic Computing with a 4-Port Photonic Reservoir for Modulation Format Identification

The fields of machine learning and artificial intelligence drive researchers to explore energy-efficient, brain-inspired new hardware. Reservoir computing encompasses recurrent neural networks for sequential data processing and matches the performance of other recurrent networks with less training and lower costs. However, traditional software-based neural networks suffer from high energy consumption due to computational demands and massive data transfer needs. Photonic reservoir computing overcomes this challenge with energy-efficient neuromorphic photonic integrated circuits or NeuroPICs. Here, we introduce a reservoir NeuroPIC used for modulation format identification in C-band telecommunication network monitoring. It is built on a silicon-on-insulator platform with a 4-port reservoir architecture consisting of a set of physical nodes connected via delay lines. We comprehensively describe the NeuroPIC design and fabrication, experimentally demonstrate its performance, and compare it with simulations. The NeuroPIC incorporates non-linearity through a simple digital readout and achieves close to 100% accuracy in identifying several configurations of quadrature amplitude modulation formats transmitted over 20 km of optical fiber at 32 GBaud symbol rate. The NeuroPIC performance is robust against fabrication imperfections like waveguide propagation loss, phase randomization, etc. and delay line length variations. Furthermore, the experimental results exceeded numerical simulations, which we attribute to enhanced signal interference in the experimental NeuroPIC output. Our energy-efficient photonic approach has the potential for high-speed temporal data processing in a variety of applications.

physics.app-ph↗

arXiv2024

Bimodal Plasmonic Refractive Index Sensors Based on SU-8 Waveguides

Plasmonic refractive index sensors are essential for detecting subtle variations in the ambient environment through surface plasmon interactions. Current efforts utilizing CMOS-compatible, plasmo-photonic Mach-Zehnder interferometers with active power balancing exhibit high sensitivities at the cost of fabrication and measurement complexity. Alternatively, passive bimodal plasmonic interferometers based on SU-8 waveguides present a cost-effective solution with a smaller device footprint, though they currently lack opto-mechanical isolation due to exposed photonic waveguides. In this work, we introduce innovative polymer-core and polymer-cladded bimodal plasmonic refractive index sensors with high refractive index contrast. Our sensors feature an aluminum stripe, a bilayer SU-8 photonic waveguide core, and the experimental optical cladding polymer SX AR LWL 2.0. They achieve a sensitivity of (6300 $\pm$ 460) nm/RIU (refractive index unit), surpassing both traditional and polymer-based plasmo-photonic sensors. This approach enables integrated, wafer-scale, CMOS-compatible, and low-cost sensors and facilitates plasmonic refractive index sensing platforms for various applications.

physics.optics↗

arXiv2024

CVD Graphene Contacts for Lateral Heterostructure MoS${_2}$ Field Effect Transistors

Intensive research is carried out on two-dimensional materials, in particular molybdenum disulfide, towards high-performance transistors for integrated circuits. Fabricating transistors with ohmic contacts is challenging due to the high Schottky barrier that severely limits the transistors' performance. Graphene-based heterostructures can be used in addition or as a substitute for unsuitable metals. We present lateral heterostructure transistors made of scalable chemical vapor-deposited molybdenum disulfide and chemical vapor-deposited graphene with low contact resistances of about 9 k$Ω$$μ$m and high on/off current ratios of 10${^8}$. We also present a theoretical model calibrated on our experiments showing further potential for scaling transistors and contact areas into the few nanometers range and the possibility of a strong performance enhancement by means of layer optimizations that would make transistors promising for use in future logic circuits.

cond-mat.mes-hall↗

arXiv2024

Button Shear Testing for Adhesion Measurements of 2D Materials

Two-dimensional (2D) materials are considered for numerous applications in microelectronics, although several challenges remain when integrating them into functional devices. Weak adhesion is one of them, caused by their chemical inertness. Quantifying the adhesion of 2D materials on three-dimensional surfaces is, therefore, an essential step toward reliable 2D device integration. To this end, button shear testing is proposed and demonstrated as a method for evaluating the adhesion of 2D materials with the examples of graphene and hexagonal boron nitride (hBN), molybdenum disulfide, and tungsten diselenide on silicon dioxide (SiO${_2}$) and silicon nitride substrates. We propose a fabrication process flow for polymer buttons on the 2D materials and establish suitable button dimensions and testing shear speeds. We show with our quantitative data that low substrate roughness and oxygen plasma treatments on the substrates before 2D material transfer result in higher shear strengths. Thermal annealing increases the adhesion of hBN on SiO${_2}$ and correlates with the thermal interface resistance between these materials. This establishes button shear testing as a reliable and repeatable method for quantifying adhesion of 2D materials.

physics.app-ph↗

arXiv2024

Reducing the metal-graphene contact resistance through laser-induced defects

Graphene has been extensively studied for a variety of electronic and optoelectronic applications. The reported contact resistance between metal and graphene, or rather its specific contact resistance (R{_C}), ranges from a few tens of Ω μm up to a few kΩ μm. Manufacturable solutions for defining ohmic contacts to graphene remain a subject of research. Here, we report a scalable method based on laser irradiation of graphene to reduce the R{_C} in nickel-contacted devices. A laser with a wavelength of λ = 532 nm is used to induce defects at the contact regions, which are monitored \textit{in-situ} using micro-Raman spectroscopy. Physical damage is observed using \textit{ex-situ} atomic force and scanning electron microscopy. The transfer line method (TLM) is used to extract R{_C} from back-gated graphene devices with and without laser treatment under ambient and vacuum conditions. A significant reduction in R{_C} is observed in devices where the contacts are laser irradiated, which scales with the laser power. The lowest R{_C} of about 250 Ω μm is obtained for the devices irradiated with a laser power of 20 mW, compared to 900 Ω μm for the untreated devices. The reduction is attributed to an increase in defect density, which leads to the formation of crystallite edges and in-plane dangling bonds that enhance the injection of charge carriers from the metal into the graphene. Our work suggests laser irradiation as a scalable technology for R{_C} reduction in graphene and potentially other two-dimensional materials.

physics.app-ph↗

arXiv2023

Non-Volatile Resistive Switching of Polymer Residues in 2D Material Memristors

Two-dimensional (2D) materials are popular candidates for emerging nanoscale devices, including memristors. Resistive switching (RS) in such 2D material memristors has been attributed to the formation and dissolution of conductive filaments created by the diffusion of metal ions between the electrodes. However, the area-scalable fabrication of patterned devices involves polymers that are difficult to remove from the 2D material interfaces without damage. Remaining polymer residues are often overlooked when interpreting the RS characteristics of 2D material memristors. Here, we demonstrate that the parasitic residues themselves can be the origin of RS. We emphasize the necessity to fabricate appropriate reference structures and employ atomic-scale material characterization techniques to properly evaluate the potential of 2D materials as the switching layer in vertical memristors. Our polymer-residue-based memristors exhibit RS typical for a filamentary mechanism with metal ion migration, and their performance parameters are strikingly similar to commonly reported 2D material memristors. This reveals that the exclusive consideration of electrical data without a thorough verification of material interfaces can easily lead to misinterpretations about the potential of 2D materials for memristor applications.

cond-mat.mes-hall↗

arXiv2023

Graphene-based Wireless Agile Interconnects for Massive Heterogeneous Multi-chip Processors

The main design principles in computer architecture have recently shifted from a monolithic scaling-driven approach to the development of heterogeneous architectures that tightly co-integrate multiple specialized processor and memory chiplets. In such data-hungry multi-chip architectures, current Networks-in-Package (NiPs) may not be enough to cater to their heterogeneous and fast-changing communication demands. This position paper makes the case for wireless in-package nanonetworking as the enabler of efficient and versatile wired-wireless interconnect fabrics for massive heterogeneous processors. To that end, the use of graphene-based antennas and transceivers with unique frequency-beam reconfigurability in the terahertz band is proposed. The feasibility of such a nanonetworking vision and the main research challenges towards its realization are analyzed from the technological, communications, and computer architecture perspectives.

cs.ET↗

arXiv2023

Variability and Reliability of Graphene Field-Effect Transistors with CaF2 Insulators

Graphene is a promising material for applications as a channel in graphene field-effect transistors (GFETs) which may be used as a building block for optoelectronics, high-frequency devices and sensors. However, these devices require gate insulators which ideally should form atomically flat interfaces with graphene and at the same time contain small densities of traps to maintain high device stability. Previously used amorphous oxides, such as SiO2 and Al2O3, however, typically suffer from oxide dangling bonds at the interface, high surface roughness and numerous border oxide traps. In order to address these challenges, here we use for the first time 2nm thick epitaxial CaF2 as a gate insulator in GFETs. By analyzing device-to-device variability for over 200 devices fabricated in two batches, we find that tens of them show similar gate transfer characteristics. Our statistical analysis of the hysteresis up to 175C has revealed that while an ambient-sensitive counterclockwise hysteresis can be present in some devices, the dominant mechanism is thermally activated charge trapping by border defects in CaF2 which results in the conventional clockwise hysteresis. We demonstrate that both the hysteresis and bias-temperature instabilities in our GFETs with CaF2 are comparable to similar devices with SiO2 and Al2O3. In particular, we achieve a small hysteresis below 0.01 V for equivalent oxide thickness (EOT) of about 1 nm at the electric fields up to 15 MV/cm and sweep times in the kilosecond range. Thus, our results demonstrate that crystalline CaF2 is a promising insulator for highly-stable GFETs.

physics.app-ph↗

arXiv2023

Graphene thermal infrared emitters integrated into silicon photonic waveguides

Cost-efficient and easily integrable broadband mid-infrared (mid-IR) sources would significantly enhance the application space of photonic integrated circuits (PICs). Thermal incandescent sources are superior to other common mid-IR emitters based on semiconductor materials in terms of PIC compatibility, manufacturing costs, and bandwidth. Ideal thermal emitters would radiate directly into the desired modes of the PIC waveguides via near-field coupling and would be stable at very high temperatures. Graphene is a semi-metallic two-dimensional material with comparable emissivity to thin metallic thermal emitters. It allows maximum coupling into waveguides by placing it directly into their evanescent fields. Here, we demonstrate graphene mid-IR emitters integrated with photonic waveguides that couple directly into the fundamental mode of silicon waveguides designed for a wavelength of 4,2 μm relevant for CO${_2}$ sensing. High broadband emission intensity is observed at the waveguide-integrated graphene emitter. The emission at the output grating couplers confirms successful coupling into the waveguide mode. Thermal simulations predict emitter temperatures up to 1000°C, where the blackbody radiation covers the mid-IR region. A coupling efficiency η, defined as the light emitted into the waveguide divided by the total emission, of up to 68% is estimated, superior to data published for other waveguide-integrated emitters.

physics.optics↗

arXiv2023

Combined Structural and Plasmonic Enhancement of Nanometer-Thin Film Photocatalysis for Solar-Driven Wastewater Treatment

Titanium dioxide (TiO$_2$) thin films are commonly used as photocatalytic materials. Here, we enhance the photocatalytic activity of devices based on TiO$_2$ by combining nanostructured glass substrates with metallic plasmonic nanostructures. We achieve a three-fold increase of the catalyst's surface area through nanoscale three-dimensional patterning of periodic conical grids, which creates a broadband optical absorber. The addition of aluminum and gold activates the structures plasmonically and improves the optical absorption in the TiO$_2$ films to above 70% in the visible and NIR spectral range. We demonstrate the resulting enhancement of the photocatalytic activity with organic dye degradation tests under different light sources. Furthermore, the pharmaceutical drug Carbamazepine, a common water pollutant, is reduced in aqueous solution by up to 48% in 360 minutes. Our approach is scalable and potentially enables future solar-driven wastewater treatment.

physics.optics↗

arXiv2023

Resistive Switching and Current Conduction Mechanisms in Hexagonal Boron Nitride Threshold Memristors with Nickel Electrodes

The two-dimensional (2D) insulating material hexagonal boron nitride (h BN) has attracted much attention as the active medium in memristive devices due to its favorable physical properties, among others, a wide bandgap that enables a large switching window. Metal filament formation is frequently suggested for h-BN devices as the resistive switching (RS) mechanism, usually supported by highly specialized methods like conductive atomic force microscopy (C-AFM) or transmission electron microscopy (TEM). Here, we investigate the switching of multilayer hexagonal boron nitride (h-BN) threshold memristors with two nickel (Ni) electrodes through their current conduction mechanisms. Both the high and the low resistance states are analyzed through temperature-dependent current-voltage measurements. We propose the formation and retraction of nickel filaments along boron defects in the h-BN film as the resistive switching mechanism. We corroborate our electrical data with TEM analyses to establish temperature-dependent current-voltage measurements as a valuable tool for the analysis of resistive switching phenomena in memristors made of 2D materials. Our memristors exhibit a wide and tunable current operation range and low stand-by currents, in line with the state of the art in h-BN-based threshold switches, a low cycle-to-cycle variability of 5%, and a large On/Off ratio of 10${^7}$.

physics.app-ph↗

arXiv2023

Graphene-Quantum Dot Hybrid Photodetectors from 200 mm Wafer Scale Processing

A 200 mm processing platform for the large-scale production of graphene field-effect transistor-quantum dot (GFET-QD) hybrid photodetectors is demonstrated. Comprehensive statistical analysis of electric data shows a high yield (96%) and low variation of the 200 mm scale fabrication. The GFET-QD devices deliver responsivities of 10${^5}$ - 10${^6}$ V/W in a wavelength range from 400 to 1800 nm, at up to 100 frames per second. Spectral sensitivity compares well to that obtained using similar GFET-QD photodetectors. The device concept enables gate-tunable suppression or enhancement of the photovoltage, which may be exploited for electric shutter operation by toggling between the signal capture and shutter states. The devices show good stability at a wide operation range and external quantum efficiency of 20% in the short-wavelength infrared range. Furthermore, an integration solution with complementary metal-oxide-semiconductor technology is presented to realize image-sensor-array chips and a proof-of-concept image system. This work demonstrates the potential for the volume manufacture of infrared photodetectors for a wide range of imaging applications.

cond-mat.mes-hall↗

arXiv2022

Enhanced intrinsic voltage gain in artificially stacked bilayer CVD graphene field effect transistors

We report on electronic transport in dual-gate, artificially stacked bilayer graphene field effect transistors (BiGFETs) fabricated from large-area chemical vapor deposited (CVD) graphene. The devices show enhanced tendency to current saturation, which leads to reduced minimum output conductance values. This results in improved intrinsic voltage gain of the devices when compared to monolayer graphene FETs. We employ a physics based compact model originally developed for Bernal stacked bilayer graphene FETs (BSBGFETs) to explore the observed phenomenon. The improvement in current saturation may be attributed to increased charge carrier density in the channel and thus reduced saturation velocity due to carrier-carrier scattering.

cond-mat.mes-hall↗

arXiv2022

Contact Resistance Study of Various Metal Electrodes with CVD Graphene

In this study, the contact resistance of various metals to chemical vapour deposited (CVD) monolayer graphene is investigated. Transfer length method (TLM) structures with varying widths and separation between contacts have been fabricated and electrically characterized in ambient air and vacuum condition. Electrical contacts are made with five metals: gold, nickel, nickel/gold, palladium and platinum/gold. The lowest value of 92 Ωμm is observed for the contact resistance between graphene and gold, extracted from back-gated devices at an applied back-gate bias of -40 V. Measurements carried out under vacuum show larger contact resistance values when compared with measurements carried out in ambient conditions. Post processing annealing at 450°C for 1 hour in argon-95% / hydrogen-5% atmosphere results in lowering the contact resistance value which is attributed to the enhancement of the adhesion between metal and graphene. The results presented in this work provide an overview for potential contact engineering for high performance graphene-based electronic devices.

cond-mat.mtrl-sci↗

arXiv2022

Phase mask pinholes as spatial filters for laser interference lithography

Laser resonators have outputs with Gaussian spatial beam profiles. In laser interference lithography (LIL), using such Gaussian shaped beams leads to an inhomogeneous exposure of the substrate. As a result, dimensions of lithography defined features vary significantly across the substrate. In most LIL setups, pinholes are used as filters to remove optical noise. Following a concept proposed by Hariharan et. al. a phase mask can be added to these pinholes. In theory, this modification results in a more uniform beam profile, and, if applied as spatial filters in LIL, in improved exposure and hence feature size uniformity. Here, we report on the first successful fabrication of such elements and demonstrate their use in an LIL setup to reduce feature dimension variations from 47.2% to 27.5% using standard and modified pinholes, respectively.

physics.optics↗