arXiv subjects

Meng Hua

Publications and source records attributed to Meng Hua.

At least 37 records · Page 2Linked to original sources

arXiv2025

LISAC: Learned Coded Waveform Design for ISAC with OFDM

We propose deep learning based coded waveform design for integrated sensing and communication (ISAC) with orthogonal frequency-division multiplexing (OFDM). Our goal is to design a coded waveform capable of delivering accurate target parameter estimation while maintaining high communication quality measured in terms of bit error rate (BER). In the proposed learned coded waveform for ISAC (LISAC), the pilot and data encoding functions at the encoder are parameterized by recurrent neural networks (RNNs) and are trained jointly in an end-to-end fashion. The communication receiver estimates the channel and performs residual-assisted minimum mean square error (MMSE) channel equalization, where a neural network is introduced to calibrate the coarse estimate produced by the standard MMSE channel equalizer. Then, an RNN-based channel decoder is employed to decode the information bits using the equalized signal. Two different sensing loss functions are considered, one calculates the mean square error (MSE) between the original and the estimated sensing parameters, while the other calculates the Cramer-Rao lower bound (CRLB). The LISAC modules are optimized using a weighted combination of communication and sensing losses and different trade-off points between the sensing and communication performances are achieved by adjusting the weights. Simulation results show that the proposed LISAC waveform achieves a better trade-off curve compared to existing alternatives for both AWGN and multi-path fading scenarios. Ablation studies are carried out to demonstrate the gain brought by each design component for a better understanding of the proposed scheme.

eess.SP↗

arXiv2025

Wireless Powered MEC Systems via Discrete Pinching Antennas: TDMA versus NOMA

Pinching antennas (PAs), a new type of reconfigurable and flexible antenna structures, have recently attracted significant research interest due to their ability to create line-of-sight links and mitigate large-scale path loss. Owing to their potential benefits, integrating PAs into wireless powered mobile edge computing (MEC) systems is regarded as a viable solution to enhance both energy transfer and task offloading efficiency. Unlike prior studies that assume ideal continuous PA placement along waveguides, this paper investigates a practical discrete PA-assisted wireless powered MEC framework, where devices first harvest energy from PA-emitted radio-frequency signals and then adopt a partial offloading mode, allocating part of the harvested energy to local computing and the remainder to uplink offloading. The uplink phase considers both the time-division multiple access (TDMA) and non-orthogonal multiple access (NOMA), each examined under three levels of PA activation flexibility. For each configuration, we formulate a joint optimization problem to maximize the total computational bits and conduct a theoretical performance comparison between the TDMA and NOMA schemes. To address the resulting mixed-integer nonlinear problems, we develop a two-layer algorithm that combines closed-form solutions based on Karush-Kuhn-Tucker (KKT) conditions with a cross-entropy-based learning method. Numerical results validate the superiority of the proposed design in terms of the harvested energy and computation performance, revealing that TDMA and NOMA achieve comparable performance under coarser PA activation levels, whereas finer activation granularity enables TDMA to achieve superior computation performance over NOMA.

eess.SP↗

arXiv2025

Rate Optimization for Downlink URLLC via Pinching Antenna Arrays

This work studies an ultra-reliable and low-latency communications (uRLLC) downlink system using pinching antennas which are realized by activating small dielectric particles along a dielectric waveguide. Our goal is to maximize the data rate by optimizing the positions of the pinching antennas. By proposing a compact and cost-efficient antenna architecture and formulating a finite blocklength-based optimization model, we derive a closed-form solution for the optimal antenna placement under quality-of-service (QoS) and antenna spacing constraints. Meanwhile, a phase-alignment strategy is integrated into the design, enabling coherent signal superposition across the array. Simulation results confirm significant rate improvements over conventional antenna systems while satisfying uRLLC requirements, making the proposed design well-suited for compact and latency-critical future applications.

eess.SP↗

arXiv2025

Realizing Fully-Connected Layers Over the Air via Reconfigurable Intelligent Surfaces

By leveraging the waveform superposition property of the multiple access channel, over-the-air computation (AirComp) enables the execution of digital computations through analog means in the wireless domain, leading to faster processing and reduced latency. In this paper, we propose a novel approach to implement a neural network (NN) consisting of digital fully connected (FC) layers using physically reconfigurable hardware. Specifically, we investigate reconfigurable intelligent surfaces (RISs)-assisted multiple-input multiple-output (MIMO) systems to emulate the functionality of a NN for over-the-air inference. In this setup, both the RIS and the transceiver are jointly configured to manipulate the ambient wireless propagation environment, effectively reproducing the adjustable weights of a digital FC layer. We refer to this new computational paradigm as \textit{AirFC}. We formulate an imitation error minimization problem between the effective channel created by RIS and a target FC layer by jointly optimizing over-the-air parameters. To solve this non-convex optimization problem, an extremely low-complexity alternating optimization algorithm is proposed, where semi-closed-form/closed-form solutions for all optimization variables are derived. Simulation results show that the RIS-assisted MIMO-based AirFC can achieve competitive classification accuracy. Furthermore, it is also shown that a multi-RIS configuration significantly outperforms a single-RIS setup, particularly in line-of-sight (LoS)-dominated channels.

cs.IT↗

arXiv2025

Secure Transmission for Cell-Free Symbiotic Radio Communications with Movable Antenna: Continuous and Discrete Positioning Designs

In this paper, we study a movable antenna (MA) empowered secure transmission scheme for reconfigurable intelligent surface (RIS) aided cell-free symbiotic radio (SR) system. Specifically, the MAs deployed at distributed access points (APs) work collaboratively with the RIS to establish high-quality propagation links for both primary and secondary transmissions, as well as suppressing the risk of eavesdropping on confidential primary information. We consider both continuous and discrete MA position cases and maximize the secrecy rate of primary transmission under the secondary transmission constraints, respectively. For the continuous position case, we propose a two-layer iterative optimization method based on differential evolution with one-in-one representation (DEO), to find a high-quality solution with relatively moderate computational complexity. For the discrete position case, we first extend the DEO based iterative framework by introducing the mapping and determination operations to handle the characteristic of discrete MA positions. To further reduce the computational complexity, we then design an alternating optimization (AO) iterative framework to solve all variables within a single layer. In particular, we develop an efficient strategy to derive the sub-optimal solution for the discrete MA positions, superseding the DEO-based method. Numerical results validate the effectiveness of the proposed MA empowered secure transmission scheme along with its optimization algorithms.

eess.SP↗

arXiv2025

Implementing Neural Networks Over-the-Air via Reconfigurable Intelligent Surfaces

In this paper, we investigate reconfigurable intelligent surface (RIS)-aided multiple-input-multiple-output (MIMO) OAC systems designed to emulate the fully-connected (FC) layer of a neural network (NN) via analog OAC, where the RIS and the transceivers are jointly adjusted to engineer the ambient wireless propagation environment to emulate the weights of the target FC layer. We refer to this novel computational paradigm as AirFC. We first study the case in which the precoder, combiner, and RIS phase shift matrices are jointly optimized to minimize the mismatch between the OAC system and the target FC layer. To solve this non-convex optimization problem, we propose a low-complexity alternating optimization algorithm, where semi-closed-form/closed-form solutions for all optimization variables are derived. Next, we consider training of the system parameters using two distinct learning strategies, namely centralized training and distributed training. In the centralized training approach, training is performed at either the transmitter or the receiver, whichever possesses the channel state information (CSI), and the trained parameters are provided to the other terminal. In the distributed training approach, the transmitter and receiver iteratively update their parameters through back and forth transmissions by leveraging channel reciprocity, thereby avoiding CSI acquisition and significantly reducing computational complexity. Subsequently, we extend our analysis to a multi-RIS scenario by exploiting its spatial diversity gain to enhance the system performance. Simulation results show that the AirFC system realized by the RIS-aided MIMO configuration achieves satisfactory classification accuracy.

cs.IT↗

arXiv2025

Near-Field ISAC for THz Wireless Systems

Sixth-generation (6G) wireless networks are expected not only to provide high-speed connectivity but also to support reliable sensing capabilities, giving rise to the integrated sensing and communication (ISAC) paradigm. To enable higher data rates and more accurate sensing, terahertz (THz) systems empowered by extremely large multiple-input-multiple-output (XL-MIMO) technology are envisioned as key enablers for future ISAC systems. Owing to the substantial increase in both effective array aperture and carrier frequency, a considerable portion of future ISAC applications is anticipated to fall within the near-field coverage region, instead of the conventional far-field. However, most existing ISAC techniques are designed under the far-field planar wave assumption, struggling to accommodate the unique characteristics of THz near-field propagation. To motivate future research into near-field ISAC research, we systematically investigate the characteristics of THz near-field propagation and explore its potential to facilitate ISAC systems. Specifically, we analyze three fundamental characteristics of THz near-field propagation and review state-of-the-art techniques that exploit these features to boost both communication and sensing performance. To further harness the angular-range coupling effect, we zoom into a particularly interesting approach to near-field sensing based on wavenumber domain. Besides, to exploit the beam squint effect, an ISAC resource allocation framework is introduced to support integrated multi-angle sensing and multi-user communication. Finally, we outline promising directions for future research in this emerging area.

eess.SP↗

arXiv2025

Multi-IRS Aided ISAC System: Multi-Path Exploitation Versus Reduction

This paper investigates a multi-intelligent reflecting surface (IRS) aided integrated sensing and communication (ISAC) system, where multiple IRSs are strategically deployed not only to assist the communication from a multi-antenna base station (BS) to a multi-antenna communication user (CU), but also enable the sensing service for a point target in the non-line-of-sight (NLoS) region of the BS. First, we propose a hybrid multi-IRS architecture, which consists of several passive IRSs and one semi-passive IRS equipped with both active sensors and reflecting elements. To be specific, the active sensors are exploited to receive the echo signals for estimating the target's angle information, and the multiple reflecting paths provided by multi-IRS are employed to improve the degree of freedoms (DoFs) of communication. Under the given budget on the number of total IRSs elements, we theoretically show that increasing the number of deployed IRSs is beneficial for improving DoFs of spatial multiplexing for communication while increasing the Cramer-Rao bound (CRB) of target estimation, which unveils a fundamental tradeoff between the sensing and communication performance. To characterize the rate-CRB tradeoff, we study a rate maximization problem, by optimizing the BS transmit covariance matrix, IRSs phase-shifts, and the number of deployed IRSs, subject to a maximum CRB constraint. Analytical results reveal that the communication-oriented design becomes optimal when the total number of IRSs elements exceeds a certain threshold, wherein the relationships of the rate and CRB with the number of IRS elements/sensors, transmit power, and the number of deployed IRSs are theoretically derived and demystified. Simulation results validate our theoretical findings and also demonstrate the superiority of our proposed designs over the benchmark schemes.

cs.IT↗

arXiv2025

Active RIS Enabled NLoS LEO Satellite Communications: A Three-timescale Optimization Framework

In this letter, we study an active reconfigurable intelligent surfaces (RIS) assisted Low Earth orbit (LEO) satellite communications under non-line-of-sight (NLoS) scenarios, where the active RIS is deployed to create visual line-of-sight links for reliable communication. To address the challenges of high energy consumption caused by frequent beamforming updates in active RIS, we propose a three-timescale optimization framework that jointly designs the transmit beamforming, RIS beamforming, and RIS direction vectors based on their characteristics. The goal is to maximize the system achievable rate while reducing energy consumption by controlling the RIS beamforming switching frequency. Then, a two-layer solution framework is developed, incorporating fractional programming (FP), alternating optimization (AO), successive approximation (SCA), and penalty-based methods, to obtain the optimized solution. Simulation results demonstrate that the proposed scheme can effectively improve system performance and reduce the energy consumption of the active RIS.

eess.SP↗

arXiv2025

Computation Capacity Maximization for Pinching Antennas-Assisted Wireless Powered MEC Systems

In this paper,we investigate a novel wireless powered mobile edge computing (MEC) system assisted by pinching antennas (PAs), where devices first harvest energy from a base station and then offload computation-intensive tasks to an MEC server. As an emerging technology, PAs utilize long dielectric waveguides embedded with multiple localized dielectric particles, which can be spatially configured through a pinching mechanism to effectively reduce large-scale propagation loss. This capability facilitates both efficient downlink energy transfer and uplink task offloading. To fully exploit these advantages, we adopt a non-orthogonal multiple access (NOMA) framework and formulate a joint optimization problem to maximize the system's computational capacity by jointly optimizing device transmit power, time allocation, PA positions in both uplink and downlink, and radiation control. To address the resulting non-convexity caused by variable coupling, we develop an alternating optimization algorithm that integrates particle swarm optimization (PSO) with successive convex approximation. Simulation results demonstrate that the proposed PA-assisted design substantially improves both energy harvesting efficiency and computational performance compared to conventional antenna systems.

eess.SP↗

arXiv2025

Beamforming Design for Intelligent Reffecting Surface Aided Near-Field THz Communications

Intelligent reflecting surface (IRS) operating in the terahertz (THz) band has recently gained considerable interest due to its high spectrum bandwidth. Due to the exploitation of large scale of IRS, there is a high probability that the transceivers will be situated within the near-field region of the IRS. Thus, the near-field beam split effect poses a major challenge for the design of wideband IRS beamforming, which causes the radiation beam to deviate from its intended location, leading to significant gain losses and limiting the efficient use of available bandwidths. While delay-based IRS has emerged as a potential solution, current beamforming schemes generally assume unbounded range time delays (TDs). In this letter, we first investigate the near-field beam split issue at the IRS. Then, we extend the piece-wise far-field model to the IRS, based on which, a double-layer delta-delay (DLDD) IRS beamforming scheme is proposed. Specifically, we employ an element-grouping strategy and the TD imposed on each sub-surface of IRS is achieved by a series of TD modules. This method significantly reduces the required range of TDs. Numerical results show that the proposed DLDD IRS beamforming scheme can effectively mitigate the near-field beam split and achieve near-optimal performance.

eess.SP↗

arXiv2025

Over-the-Air Inference over Multi-hop MIMO Networks

A novel over-the-air machine learning framework over multi-hop multiple-input and multiple-output (MIMO) networks is proposed. The core idea is to imitate fully connected (FC) neural network layers using multiple MIMO channels by carefully designing the precoding matrices at the transmitting nodes. A neural network dubbed PrototypeNet is employed consisting of multiple FC layers, with the number of neurons of each layer equal to the number of antennas of the corresponding terminal. To achieve satisfactory performance, we train PrototypeNet based on a customized loss function consisting of classification error and the power of latent vectors to satisfy transmit power constraints, with noise injection during training. Precoding matrices for each hop are then obtained by solving an optimization problem. We also propose a multiple-block extension when the number of antennas is limited. Numerical results verify that the proposed over-the-air transmission scheme can achieve satisfactory classification accuracy under a power constraint. The results also show that higher classification accuracy can be achieved with an increasing number of hops at a modest signal-to-noise ratio (SNR).

eess.SP↗

arXiv2025

Robust Transmission Design for Reconfigurable Intelligent Surface and Movable Antenna Enabled Symbiotic Radio Communications

This paper explores the application of movable antenna (MA), a cutting-edge technology with the capability of altering antenna positions, in a symbiotic radio (SR) system enabled by reconfigurable intelligent surface (RIS). The goal is to fully exploit the capabilities of both MA and RIS, constructing a better transmission environment for the co-existing primary and secondary transmission systems. For both parasitic SR (PSR) and commensal SR (CSR) scenarios with the channel uncertainties experienced by all transmission links, we design a robust transmission scheme with the goal of maximizing the primary rate while ensuring the secondary transmission quality. To address the maximization problem with thorny non-convex characteristics, we propose an alternating optimization framework that utilizes the General S-Procedure, General Sign-Definiteness Principle, successive convex approximation (SCA), and simulated annealing (SA) improved particle swarm optimization (SA-PSO) algorithms. Numerical results validate that the CSR scenario significantly outperforms the PSR scenario in terms of primary rate, and also show that compared to the fixed-position antenna scheme, the proposed MA scheme can increase the primary rate by 1.62 bps/Hz and 2.37 bps/Hz for the PSR and CSR scenarios, respectively.

eess.SP↗

arXiv2025

Element-Grouping Strategy for Intelligent Reflecting Surface: Performance Analysis and Algorithm Optimization

As a revolutionary paradigm for intelligently controlling wireless channels, intelligent reflecting surface (IRS) has emerged as a promising technology for future sixth-generation (6G) wireless communications. While IRS-aided communication systems can achieve attractive high channel gains, existing schemes require plenty of IRS elements to mitigate the ``multiplicative fading'' effect in cascaded channels, leading to high complexity for real-time beamforming and high signaling overhead for channel estimation. In this paper, the concept of sustainable intelligent element-grouping IRS (IEG-IRS) is proposed to overcome those fundamental bottlenecks. Specifically, based on the statistical channel state information (S-CSI), the proposed grouping strategy intelligently pre-divide the IEG-IRS elements into multiple groups based on the beam-domain grouping method, with each group sharing the common reflection coefficient and being optimized in real time using the instantaneous channel state information (I-CSI). Then, we further analyze the asymptotic performance of the IEG-IRS to reveal the substantial capacity gain in an extremely large-scale IRS (XL-IRS) aided single-user single-input single-output (SU-SISO) system. In particular, when a line-of-sight (LoS) component exists, it demonstrates that the combined cascaded link can be considered as a ``deterministic virtual LoS'' channel, resulting in a sustainable squared array gain achieved by the IEG-IRS. Finally, we formulate a weighted-sum-rate (WSR) maximization problem for an IEG-IRS-aided multiuser multiple-input single-output (MU-MISO) system and a two-stage algorithm for optimizing the beam-domain grouping strategy and the multi-user active-passive beamforming is proposed.

eess.SP↗

arXiv2025

IRS Aided Federated Learning: Multiple Access and Fundamental Tradeoff

This paper investigates an intelligent reflecting surface (IRS) aided wireless federated learning (FL) system, where an access point (AP) coordinates multiple edge devices to train a machine leaning model without sharing their own raw data. During the training process, we exploit the joint channel reconfiguration via IRS and resource allocation design to reduce the latency of a FL task. Particularly, we propose three transmission protocols for assisting the local model uploading from multiple devices to an AP, namely IRS aided time division multiple access (I-TDMA), IRS aided frequency division multiple access (I-FDMA), and IRS aided non-orthogonal multiple access (INOMA), to investigate the impact of IRS on the multiple access for FL. Under the three protocols, we minimize the per-round latency subject to a given training loss by jointly optimizing the device scheduling, IRS phase-shifts, and communicationcomputation resource allocation. For the associated problem under I-TDMA, an efficient algorithm is proposed to solve it optimally by exploiting its intrinsic structure, whereas the highquality solutions of the problems under I-FDMA and I-NOMA are obtained by invoking a successive convex approximation (SCA) based approach. Then, we further develop a theoretical framework for the performance comparison of the proposed three transmission protocols. Sufficient conditions for ensuring that I-TDMA outperforms I-NOMA and those of its opposite are unveiled, which is fundamentally different from that NOMA always outperforms TDMA in the system without IRS. Simulation results validate our theoretical findings and also demonstrate the usefulness of IRS for enhancing the fundamental tradeoff between the learning latency and learning accuracy.

eess.SP↗

arXiv2024

Intelligent Angle Map-based Beam Alignment for RIS-aided mmWave Communication Networks

Recently, reconfigurable intelligent surface (RIS) has been widely used to enhance the performance of millimeter wave (mmWave) communication systems, making beam alignment more challenging. To ensure efficient communication, this paper proposes a novel intelligent angle map-based beam alignment scheme for both general user equipments (UEs) and RIS-aided UEs simultaneously in a fast and effective way. Specifically, we construct a beam alignment architecture that utilizes only angular information. To obtain the angle information, the currently hottest seq2seq model - the Transformer - is introduced to offline learn the relationship between UE geographic location and the corresponding optimal beam direction. Based on the powerful machine learning model, the location-angle mapping function, i.e., the angle map, can be built. As long as the location information of UEs is available, the angle map can make the acquisition of beam alignment angles effortless. In the simulation, we utilize a ray-tracing-based dataset to verify the performance of the proposed scheme. It is demonstrated that the proposed scheme can achieve high-precision beam alignment and remarkable system performance without any beam scanning.

cs.IT↗

arXiv2024

The Career Interests of Large Language Models

Recent advancements in Large Language Models (LLMs) have significantly extended their capabilities, evolving from basic text generation to complex, human-like interactions. In light of the possibilities that LLMs could assume significant workplace responsibilities, it becomes imminently necessary to explore LLMs' capacities as professional assistants. This study focuses on the aspect of career interests by applying the Occupation Network's Interest Profiler short form to LLMs as if they were human participants and investigates their hypothetical career interests and competence, examining how these vary with language changes and model advancements. We analyzed the answers using a general linear mixed model approach and found distinct career interest inclinations among LLMs, particularly towards the social and artistic domains. Interestingly, these preferences did not align with the occupations where LLMs exhibited higher competence. This novel approach of using psychometric instruments and sophisticated statistical tools on LLMs unveils fresh perspectives on their integration into professional environments, highlighting human-like tendencies and promoting a reevaluation of LLMs' self-perception and competency alignment in the workforce.

cs.AI↗

arXiv2024

Intelligent Reflecting Surface Aided AirComp: Multi-Timescale Design and Performance Analysis

The integration of intelligent reflecting surface (IRS) into over-the-air computation (AirComp) is an effective solution for reducing the computational mean squared error (MSE) via its high passive beamforming gain. Prior works on IRS aided AirComp generally rely on the full instantaneous channel state information (I-CSI), which is not applicable to large-scale systems due to its heavy signalling overhead. To address this issue, we propose a novel multi-timescale transmission protocol. In particular, the receive beamforming at the access point (AP) is pre-determined based on the static angle information and the IRS phase-shifts are optimized relying on the long-term statistical CSI. With the obtained AP receive beamforming and IRS phase-shifts, the effective low-dimensional I-CSI is exploited to determine devices' transmit power in each coherence block, thus substantially reducing the signalling overhead. Theoretical analysis unveils that the achievable MSE scales on the order of ${\cal O}\left( {K/\left( {{N^2}M} \right)} \right)$, where $M$, $N$, and $K$ are the number of AP antennas, IRS elements, and devices, respectively. We also prove that the channel-inversion power control is asymptotically optimal for large $N$, which reveals that the full power transmission policy is not needed for lowering the power consumption of energy-limited devices.

cs.IT↗