arXiv subjects

Meng Hua

Publications and source records attributed to Meng Hua.

At least 55 records · Page 3Linked to original sources

arXiv2024

Intelligent Reflecting Surface Aided Target Localization With Unknown Transceiver-IRS Channel State Information

Integrating wireless sensing capabilities into base stations (BSs) has become a widespread trend in the future beyond fifth-generation (B5G)/sixth-generation (6G) wireless networks. In this paper, we investigate intelligent reflecting surface (IRS) enabled wireless localization, in which an IRS is deployed to assist a BS in locating a target in its non-line-of-sight (NLoS) region. In particular, we consider the case where the BS-IRS channel state information (CSI) is unknown. Specifically, we first propose a separate BS-IRS channel estimation scheme in which the BS operates in full-duplex mode (FDM), i.e., a portion of the BS antennas send downlink pilot signals to the IRS, while the remaining BS antennas receive the uplink pilot signals reflected by the IRS. However, we can only obtain an incomplete BS-IRS channel matrix based on our developed iterative coordinate descent-based channel estimation algorithm due to the "sign ambiguity issue". Then, we employ the multiple hypotheses testing framework to perform target localization based on the incomplete estimated channel, in which the probability of each hypothesis is updated using Bayesian inference at each cycle. Moreover, we formulate a joint BS transmit waveform and IRS phase shifts optimization problem to improve the target localization performance by maximizing the weighted sum distance between each two hypotheses. However, the objective function is essentially a quartic function of the IRS phase shift vector, thus motivating us to resort to the penalty-based method to tackle this challenge. Simulation results validate the effectiveness of our proposed target localization scheme and show that the scheme's performance can be further improved by finely designing the BS transmit waveform and IRS phase shifts intending to maximize the weighted sum distance between different hypotheses.

cs.ET↗

arXiv2024

Joint Active and Passive Beamforming for IRS-Aided Wireless Energy Transfer Network Exploiting One-Bit Feedback

To reap the active and passive beamforming gain in an intelligent reflecting surface (IRS)-aided wireless network, a typical way is to first acquire the channel state information (CSI) relying on the pilot signal, and then perform the joint beamforming design. However, it is a great challenge when the receiver can neither send pilot signals nor have complex signal processing capabilities due to its hardware limitation. To tackle this problem, we study in this paper an IRS-aided wireless energy transfer (WET) network and propose two joint beamforming design methods, namely, the channel-estimationbased method and the distributed-beamforming-based method, that require only one-bit feedback from the energy receiver (ER) to the energy transmitter (ET). Specifically, for the channelestimation-based method, according to the feedback information, the ET is able to infer the cascaded ET-IRS-ER channel by continually adjusting its transmit beamformer while applying the analytic center cutting plane method (ACCPM). Then, based on the estimated cascaded CSI, the joint beamforming design can be performed by using the existing optimization techniques. While for the distributed-beamforming-based method, we first apply the distributed beamforming algorithm to optimize the IRS reflection coefficients, which is theoretically proven to converge to a local optimum almost surely. Then, the optimal ET's transmit covariance matrix is obtained based on the effective ET-ER channel learned by applying the ACCPM only once. Numerical results demonstrate the effectiveness of our proposed one-bitfeedback-based joint beamforming design schemes while greatly reducing the requirement on the hardware complexity of the ER. In particular, the high accuracy of our IRS-involved cascaded channel estimation method exploiting one-bit feedback is also validated.

eess.SY↗

arXiv2024

STAR-RIS Aided Secure MIMO Communication Systems

This paper investigates simultaneous transmission and reflection reconfigurable intelligent surface (STAR-RIS) aided physical layer security (PLS) in multiple-input multiple-output (MIMO) systems, where the base station (BS) transmits secrecy information with the aid of STAR-RIS against multiple eavesdroppers equipped with multiple antennas. We aim to maximize the secrecy rate by jointly optimizing the active beamforming at the BS and passive beamforming at the STAR-RIS, subject to the hardware constraint for STAR-RIS. To handle the coupling variables, a minimum mean-square error (MMSE) based alternating optimization (AO) algorithm is applied. In particular, the amplitudes and phases of STAR-RIS are divided into two blocks to simplify the algorithm design. Besides, by applying the Majorization-Minimization (MM) method, we derive a closed-form expression of the STAR-RIS's phase shifts. Numerical results show that the proposed scheme significantly outperforms various benchmark schemes, especially as the number of STAR-RIS elements increases.

cs.IT↗

arXiv2024

3D Multi-Target Localization Via Intelligent Reflecting Surface: Protocol and Analysis

With the emerging environment-aware applications, ubiquitous sensing is expected to play a key role in future networks. In this paper, we study a 3-dimensional (3D) multi-target localization system where multiple intelligent reflecting surfaces (IRSs) are applied to create virtual line-of-sight (LoS) links that bypass the base station (BS) and targets. To fully unveil the fundamental limit of IRS for sensing, we first study a single-target-single-IRS case and propose a novel \textit{two-stage localization protocol} by controlling the on/off state of IRS. To be specific, in the IRS-off stage, we derive the Cramér-Rao bound (CRB) of the azimuth/elevation direction-of-arrival (DoA) of the BS-target link and design a DoA estimator based on the MUSIC algorithm. In the IRS-on stage, the CRB of the azimuth/elevation DoA of the IRS-target link is derived and a simple DoA estimator based on the on-grid IRS beam scanning method is proposed. Particularly, the impact of echo signals reflected by IRS from different paths on sensing performance is analyzed. Moreover, we prove that the single-beam of the IRS is not capable of sensing, but it can be achieved with \textit{multi-beam}. Based on the two obtained DoAs, the 3D single-target location is constructed. We then extend to the multi-target-multi-IRS case and propose an \textit{IRS-adaptive sensing protocol} by controlling the on/off state of multiple IRSs, and a multi-target localization algorithm is developed. Simulation results demonstrate the effectiveness of our scheme and show that sub-meter-level positioning accuracy can be achieved.

cs.IT↗

arXiv2024

Integrated Sensing and Communication: Joint Pilot and Transmission Design

This paper studies a communication-centric integrated sensing and communication (ISAC) system, where a multi-antenna base station (BS) simultaneously performs downlink communication and target detection. A novel target detection and information transmission protocol is proposed, where the BS executes the channel estimation and beamforming successively and meanwhile jointly exploits the pilot sequences in the channel estimation stage and user information in the transmission stage to assist target detection. We investigate the joint design of pilot matrix, training duration, and transmit beamforming to maximize the probability of target detection, subject to the minimum achievable rate required by the user. However, designing the optimal pilot matrix is rather challenging since there is no closed-form expression of the detection probability with respect to the pilot matrix. To tackle this difficulty, we resort to designing the pilot matrix based on the information-theoretic criterion to maximize the mutual information (MI) between the received observations and BS-target channel coefficients for target detection. We first derive the optimal pilot matrix for both channel estimation and target detection, and then propose an unified pilot matrix structure to balance minimizing the channel estimation error (MSE) and maximizing MI. Based on the proposed structure, a low-complexity successive refinement algorithm is proposed. Simulation results demonstrate that the proposed pilot matrix structure can well balance the MSE-MI and the Rate-MI tradeoffs, and show the significant region improvement of our proposed design as compared to other benchmark schemes. Furthermore, it is unveiled that as the communication channel is more correlated, the Rate-MI region can be further enlarged.

cs.IT↗

arXiv2023

6G Enabled Advanced Transportation Systems

With the emergence of communication services with stringent requirements such as autonomous driving or on-flight Internet, the sixth-generation (6G) wireless network is envisaged to become an enabling technology for future transportation systems. In this paper, two ways of interactions between 6G networks and transportation are extensively investigated. On one hand, the new usage scenarios and capabilities of 6G over existing cellular networks are firstly highlighted. Then, its potential in seamless and ubiquitous connectivity across the heterogeneous space-air-ground transportation systems is demonstrated, where railways, airplanes, high-altitude platforms and satellites are investigated. On the other hand, we reveal that the introduction of 6G guarantees a more intelligent, efficient and secure transportation system. Specifically, technical analysis on how 6G can empower future transportation is provided, based on the latest research and standardization progresses in localization, integrated sensing and communications, and security. The technical challenges and insights for a road ahead are also summarized for possible inspirations on 6G enabled advanced transportation.

cs.IT↗

arXiv2023

Intelligent Reflecting Surface Assisted Localization: Performance Analysis and Algorithm Design

The target sensing/localization performance is fundamentally limited by the line-of-sight link and severe signal attenuation over long distances. This paper considers a challenging scenario where the direct link between the base station (BS) and the target is blocked due to the surrounding blockages and leverages the intelligent reflecting surface (IRS) with some active sensors, termed as \textit{semi-passive IRS}, for localization. To be specific, the active sensors receive echo signals reflected by the target and apply signal processing techniques to estimate the target location. We consider the joint time-of-arrival (ToA) and direction-of-arrival (DoA) estimation for localization and derive the corresponding Cramér-Rao bound (CRB), and then a simple ToA/DoA estimator without iteration is proposed. In particular, the relationships of the CRB for ToA/DoA with the number of frames for IRS beam adjustments, number of IRS reflecting elements, and number of sensors are theoretically analyzed and demystified. Simulation results show that the proposed semi-passive IRS architecture provides sub-meter level positioning accuracy even over a long localization range from the BS to the target and also demonstrate a significant localization accuracy improvement compared to the fully passive IRS architecture.

cs.IT↗

arXiv2023

Intelligent Reflecting Surface Empowered Self-Interference Cancellation in Full-Duplex Systems

Compared with traditional half-duplex wireless systems, the application of emerging full-duplex (FD) technology can potentially double the system capacity theoretically. However, conventional techniques for suppressing self-interference (SI) adopted in FD systems require exceedingly high power consumption and expensive hardware. In this paper, we consider employing an intelligent reflecting surface (IRS) in the proximity of an FD base station (BS) to mitigate SI for simultaneously receiving data from uplink users and transmitting information to downlink users. The objective considered is to maximize the weighted sum-rate of the system by jointly optimizing the IRS phase shifts, the BS transmit beamformers, and the transmit power of the uplink users. To visualize the role of the IRS in SI cancellation by isolating other interference, we first study a simple scenario with one downlink user and one uplink user. To address the formulated non-convex problem, a low-complexity algorithm based on successive convex approximation is proposed. For the more general case considering multiple downlink and uplink users, an efficient alternating optimization algorithm based on element-wise optimization is proposed. Numerical results demonstrate that the FD system with the proposed schemes can achieve a larger gain over the half-duplex system, and the IRS is able to achieve a balance between suppressing SI and providing beamforming gain.

cs.IT↗

arXiv2022

Secure Intelligent Reflecting Surface Aided Integrated Sensing and Communication

In this paper, an intelligent reflecting surface (IRS) is leveraged to enhance the physical layer security of an integrated sensing and communication (ISAC) system in which the IRS is deployed to not only assist the downlink communication for multiple users, but also create a virtual line-of-sight (LoS) link for target sensing. In particular, we consider a challenging scenario where the target may be a suspicious eavesdropper that potentially intercepts the communication-user information transmitted by the base station (BS). We investigate the joint design of the phase shifts at the IRS and the communication as well as radar beamformers at the BS to maximize the sensing beampattern gain towards the target, subject to the maximum information leakage to the eavesdropping target and the minimum signal-to-interference-plus-noise ratio (SINR) required by users. Based on the availability of perfect channel state information (CSI) of all involved user links and the accurate target location at the BS, two scenarios are considered and two different optimization algorithms are proposed. For the ideal scenario where the CSI of the user links and the target location are perfectly known at the BS, a penalty-based algorithm is proposed to obtain a high-quality solution. In particular, the beamformers are obtained with a semi-closed-form solution using Lagrange duality and the IRS phase shifts are solved for in closed form by applying the majorization-minimization (MM) method. On the other hand, for the more practical scenario where the CSI is imperfect and the target location is uncertain, a robust algorithm based on the $\cal S$-procedure and sign-definiteness approaches is proposed. Simulation results demonstrate the effectiveness of the proposed scheme in achieving a trade-off between the communication quality and the sensing quality.

cs.IT↗

arXiv2022

Achieving Multi-beam Gain in Intelligent Reflecting Surface Assisted Wireless Energy Transfer

Intelligent reflecting surface (IRS) is a promising technology to boost the efficiency of wireless energy transfer (WET) systems. However, for a multiuser WET system, simultaneous multi-beam energy transmission is generally required to achieve the maximum performance, which may not be implemented by using the IRS having only a single set of coefficients. As a result, it remains unknowns how to exploit the IRS to approach such a performance upper bound. To answer this question, we aim to maximize the total harvested energy of a multiuser WET system subject to the user fairness constraints and the non-linear energy harvesting model. We first consider the static IRS beamforming scheme, which shows that the optimal IRS reflection matrix obtained by applying semidefinite relaxation is indeed of high rank in general as the number of energy receivers (ERs) increases, due to which the resulting rank-one solution by applying Gaussian Randomization may lead to significant loss. To achieve the multi-beam gain, we then propose a general time-division based novel framework by exploiting the IRS's dynamic passive beamforming. Moreover, it is able to achieve a good balance between the system performance and complexity by controlling the number of IRS shift patterns. Finally, we also propose a time-division multiple access (TDMA) based passive beamforming design for performance comparison. Simulation results demonstrate the necessity of multi-beam transmission and the superiority of the proposed dynamic IRS beamforming scheme over existing schemes.

cs.IT↗

arXiv2022

Joint Active and Passive Beamforming Design for IRS-Aided Radar-Communication

In this paper, we study an intelligent reflecting surface (IRS)-aided radar-communication (Radcom) system, where the IRS is leveraged to help Radcom base station (BS) transmit the joint of communication signals and radar signals for serving communication users and tracking targets simultaneously. The objective of this paper is to minimize the total transmit power at the Radcom BS by jointly optimizing the active beamformers, including communication beamformers and radar beamformers, at the Radcom BS and the phase shifts at the IRS, subject to the minimum signal-to-interference-plus-noise ratio (SINR) required by communication users, the minimum SINR required by the radar, and the cross-correlation pattern design. In particular, we consider two cases, namely, case I and case II, based on the presence or absence of the radar cross-correlation design and the interference introduced by the IRS on the Radcom BS. For case I where the cross correlation design and the interference are not considered, we prove that the dedicated radar signals are not needed, which significantly reduces implementation complexity and simplifies algorithm design. Then, a penalty-based algorithm is proposed to solve the resulting non-convex optimization problem. Whereas for case II considering the cross-correlation design and the interference, we unveil that the dedicated radar signals are needed in general to enhance the system performance. Since the resulting optimization problem is more challenging to solve as compared with the case I, the semidefinite relaxation (SDR) based alternating optimization (AO) algorithm is proposed. Simulation results demonstrate the effectiveness of proposed algorithms and also show the superiority of the proposed scheme over various benchmark schemes.

cs.IT↗

arXiv2021

Throughput Maximization for IRS-Aided MIMO FD-WPCN with Non-Linear EH Model

This paper studies an intelligent reflecting surface (IRS)-aided multiple-input-multiple-output (MIMO) full-duplex (FD) wireless-powered communication network (WPCN), where a hybrid access point (HAP) operating in FD broadcasts energy signals to multiple devices for their energy harvesting (EH) in the downlink (DL) and meanwhile receives information signals from devices in the uplink (UL) with the help of an IRS. Taking into account the practical finite self-interference (SI) and the non-linear EH model, we formulate the weighted sum throughput maximization optimization problem by jointly optimizing DL/UL time allocation, precoding matrices at devices, transmit covariance matrices at the HAP, and phase shifts at the IRS. Since the resulting optimization problem is non-convex, there are no standard methods to solve it optimally in general. To tackle this challenge, we first propose an element-wise (EW) based algorithm, where each IRS phase shift is alternately optimized in an iterative manner. To reduce the computational complexity, a minimum mean-square error (MMSE) based algorithm is proposed, where we transform the original problem into an equivalent form based on the MMSE method, which facilities the design of an efficient iterative algorithm. In particular, the IRS phase shift optimization problem is recast as an second-order cone program (SOCP), where all the IRS phase shifts are simultaneously optimized. For comparison, we also study two suboptimal IRS beamforming configurations in simulations, namely partially dynamic IRS beamforming (PDBF) and static IRS beamforming (SBF), which strike a balance between the system performance and practical complexity.

cs.IT↗

arXiv2021

Micro-supervised Disturbance Learning: A Perspective of Representation Probability Distribution

The instability is shown in the existing methods of representation learning based on Euclidean distance under a broad set of conditions. Furthermore, the scarcity and high cost of labels prompt us to explore more expressive representation learning methods which depends on the labels as few as possible. To address these issues, the small-perturbation ideology is firstly introduced on the representation learning model based on the representation probability distribution. The positive small-perturbation information (SPI) which only depend on two labels of each cluster is used to stimulate the representation probability distribution and then two variant models are proposed to fine-tune the expected representation distribution of RBM, namely, Micro-supervised Disturbance GRBM (Micro-DGRBM) and Micro-supervised Disturbance RBM (Micro-DRBM) models. The Kullback-Leibler (KL) divergence of SPI is minimized in the same cluster to promote the representation probability distributions to become more similar in Contrastive Divergence(CD) learning. In contrast, the KL divergence of SPI is maximized in the different clusters to enforce the representation probability distributions to become more dissimilar in CD learning. To explore the representation learning capability under the continuous stimulation of the SPI, we present a deep Micro-supervised Disturbance Learning (Micro-DL) framework based on the Micro-DGRBM and Micro-DRBM models and compare it with a similar deep structure which has not any external stimulation. Experimental results demonstrate that the proposed deep Micro-DL architecture shows better performance in comparison to the baseline method, the most related shallow models and deep frameworks for clustering.

cs.LG↗

arXiv2021

Joint Dynamic Passive Beamforming and Resource Allocation for IRS-Aided Full-Duplex WPCN

This paper studies intelligent reflecting surface (IRS)-aided full-duplex (FD) wireless-powered communication network (WPCN), where a hybrid access point (HAP) broadcasts energy signals to multiple devices for their energy harvesting in the downlink (DL) and meanwhile receives information signals in the uplink (UL) with the help of IRS. Particularly, we propose three types of IRS beamforming configurations to strike a balance between the system performance and signaling overhead as well as implementation complexity. We first propose the fully dynamic IRS beamforming, where the IRS phase-shift vectors vary with each time slot for both DL wireless energy transfer (WET) and UL wireless information transmission (WIT). To further reduce signaling overhead and implementation complexity, we then study two special cases, namely, partially dynamic IRS beamforming and static IRS beamforming. For the former case, two different phase-shift vectors can be exploited for the DL WET and the UL WIT, respectively, whereas for the latter case, the same phase-shift vector needs to be applied for both DL and UL transmissions. We aim to maximize the system throughput by jointly optimizing the time allocation, HAP transmit power, and IRS phase shifts for the above three cases. Two efficient algorithms based on alternating optimization and penalty-based algorithms are respectively proposed for both perfect self-interference cancellation (SIC) case and imperfect SIC case by applying successive convex approximation and difference-of-convex optimization techniques. Simulation results demonstrate the benefits of IRS for enhancing the performance of FD-WPCN, and also show that the IRS-aided FD-WPCN is able to achieve significantly performance gain compared to its counterpart with half-duplex when the self-interference (SI) is properly suppressed.

cs.IT↗

arXiv2021

A Novel Wireless Communication Paradigm for Intelligent Reflecting Surface Based Symbiotic Radio Systems

This paper investigates a novel intelligent reflecting surface (IRS)-based symbiotic radio (SR) system architecture consisting of a transmitter, an IRS, and an information receiver (IR). The primary transmitter communicates with the IR and at the same time assists the IRS in forwarding information to the IR. Based on the IRS's symbol period, we distinguish two scenarios, namely, commensal SR (CSR) and parasitic SR (PSR), where two different techniques for decoding the IRS signals at the IR are employed. We formulate bit error rate (BER) minimization problems for both scenarios by jointly optimizing the active beamformer at the base station and the phase shifts at the IRS, subject to a minimum primary rate requirement. Specifically, for the CSR scenario, a penalty-based algorithm is proposed to obtain a high-quality solution, where semi-closed-form solutions for the active beamformer and the IRS phase shifts are derived based on Lagrange duality and Majorization-Minimization methods, respectively. For the PSR scenario, we apply a bisection search-based method, successive convex approximation, and difference of convex programming to develop a computationally efficient algorithm, which converges to a locally optimal solution. Simulation results demonstrate the effectiveness of the proposed algorithms and show that the proposed SR techniques are able to achieve a lower BER than benchmark schemes.

cs.IT↗

arXiv2021

UAV-Assisted Intelligent Reflecting Surface Symbiotic Radio System

This paper investigates a symbiotic unmanned aerial vehicle (UAV)-assisted intelligent reflecting surface (IRS) radio system, where the UAV is leveraged to help the IRS reflect its own signals to the base station, and meanwhile enhance the UAV transmission by passive beamforming at the IRS. First, we consider the weighted sum bit error rate (BER) minimization problem among all IRSs by jointly optimizing the UAV trajectory, IRS phase shift matrix, and IRS scheduling, subject to the minimum primary rate requirements. To tackle this complicated problem, a relaxation-based algorithm is proposed. We prove that the converged relaxation scheduling variables are binary, which means that no reconstruct strategy is needed, and thus the UAV rate constraints are automatically satisfied. Second, we consider the fairness BER optimization problem. We find that the relaxation-based method cannot solve this fairness BER problem since the minimum primary rate requirements may not be satisfied by the binary reconstruction operation. To address this issue, we first transform the binary constraints into a series of equivalent equality constraints. Then, a penalty-based algorithm is proposed to obtain a suboptimal solution. Numerical results are provided to evaluate the performance of the proposed designs under different setups, as compared with benchmarks.

eess.SP↗

arXiv2020

Intelligent Reflecting Surface-Aided Joint Processing Coordinated Multipoint Transmission

This paper investigates intelligent reflecting surface (IRS)-aided multicell wireless networks, where an IRS is deployed to assist the joint processing coordinated multipoint (JP-CoMP) transmission from multiple base stations (BSs) to multiple cell-edge users. By taking into account the fairness among cell-edge users, we aim at maximizing the minimum achievable rate of cell-edge users by jointly optimizing the transmit beamforming at the BSs and the phase shifts at the IRS. As a compromise approach, we transform the non-convex max-min problem into an equivalent form based on the mean-square error method, which facilities the design of an efficient suboptimal iterative algorithm. In addition, we investigate two scenarios, namely the single-user system and the multiuser system. For the former scenario, the optimal transmit beamforming is obtained based on the dual subgradient method, while the phase shift matrix is optimized based on the Majorization-Minimization method. For the latter scenario, the transmit beamforming matrix and phase shift matrix are obtained by the second-order cone programming and semidefinite relaxation techniques, respectively. Numerical results demonstrate the significant performance improvement achieved by deploying an IRS. Furthermore, the proposed JP-CoMP design significantly outperforms the conventional coordinated scheduling/coordinated beamforming coordinated multipoint (CS/CB-CoMP) design in terms of max-min rate.

cs.IT↗

arXiv2020

3D UAV Trajectory and Communication Design for Simultaneous Uplink and Downlink Transmission

In this paper, we investigate the unmanned aerial vehicle (UAV)-aided simultaneous uplink and downlink transmission networks, where one UAV acting as a disseminator is connected to multiple access points, and the other UAV acting as a base station (BS) collects data from numerous sensor nodes. The goal of this paper is to maximize the sum of the UAV-BS and UAV-AP system throughput by jointly optimizing the 3D UAV trajectory, communication scheduling, and UAV-AP/SN transmit power. We first consider a special case where the UAV-BS and UAV-AP trajectories are pre-determined. Although the resulting problem is an integer and non-convex optimization problem, a globally optimal solution is obtained by applying the polyblock outer approximation (POA) method based on the problem's hidden monotonic structure. Subsequently, for the general case considering the 3D UAV trajectory optimization, an efficient iterative algorithm is proposed to alternately optimize the divided sub-problem based on the successive convex approximation (SCA) technique. Numerical results demonstrate that the proposed design is able to achieve significant system throughput gain over the benchmarks. In addition, the SCA-based method can achieve nearly the same performance as the POA based method with much lower computational complexity.

cs.IT↗