arXiv subjects

Meng Shi

Publications and source records attributed to Meng Shi.

At least 19 recordsLinked to original sources

arXiv2026

Enhanced Curie temperature and room-temperature 50-nm skyrmions achieved in hexagonal ferromagnet Mn5Ge3+x synthesized via a high-pressure method

The development of new high-temperature ultrasmall-size skyrmion materials holds immense significance for the promising applications of topological spintronic devices. In this study, we demonstrate that a high-pressure synthesis technique can significantly elevate the Curie temperature of Mn5Ge3+x crystals, from 294 K to 350 K. This enhancement is attributed to the combined effects of lattice contraction and increased Ge content, the conclusion supported by Density Functional Theory calculations. Additionally, our real-space magnetic imaging reveals the stability of dipolar skyrmions with diameters of approximately 50 nm at room temperature. Our micromagnetic simulations closely replicate the diverse experimental topological magnetic textures observed. Furthermore, magnetotransport measurements indicate the potential for the electrical distinction between various topological magnetic textures in skyrmion-based devices. We also report deterministic manipulations on single dipolar skyrmions in confined nanostructures by using in-plane currents. The observation, electrical manipulation, and electrical detection of room-temperature ultrasmall topological magnetic textures underscore the potential of Mn5Ge3+x as a promising platform for spintronic device applications.

cond-mat.mtrl-sci↗

arXiv2026

Current-induced creation and dynamics of embedded magnetic skyrmion bags

Magnetic skyrmion bags-vortex-like structures hosting multiple skyrmions with tunable topological charge (Q)-hold significant promise for next-generation spintronic computing. However, while their creation using magnetic fields has been demonstrated, their direct electrical generation remains an outstanding challenge. Here, we report the direct current-induced formation and manipulation of embedded skyrmion bags in a FeGe nanoplate under zero magnetic field. Using in-situ Lorentz transmission electron microscopy, we capture the transformation of a distorted helical ground state into embedded skyrmion bags with diverse configurations, driven by nanosecond current pulses. Theoretical analysis indicates that this process is driven by the spin-transfer-torque-induced fracture of the helical state. Furthermore, we demonstrate electrically-induced transitions between skyrmion bags of different Q, leading to the stabilization of complex three-dimensional topological structures, including experimental signatures of magnetic monopoles and bobbers. Our work establishes a foundation for all-electrical control of high-Q topological spin textures and topological defects, paving the way for their application in functional spintronic devices.

cond-mat.mes-hall↗

arXiv2026

Sensitivity Enhancement of S-Band Rydberg Atom Microwave Receiver Using Resonant Cavity

Rydberg atom-based microwave electric field sensing has attracted growing interest owing to its inherent advantages, such as absolute calibration, wideband operability, and compatibility with room-temperature devices. A critical bottleneck that limits sensitivity is the inefficient coupling between the Rydberg atoms and the incident microwave field, particularly when detecting weak signals propagating in free space. Here we propose and experimentally validate a scheme that integrates a horn antenna with a resonant microwave cavity to significantly improve this coupling for free-space signal reception in the S-band. Using a two-photon excitation scheme in a cesium vapor cell, we systematically characterize the sensing performance under three configurations: a bare cell, direct cavity injection, and a cavity coupled to a horn antenna that captures free-space microwave signals over a 1 m distance. In the antenna-coupled cavity configuration, we achieve an optimal sensitivity of 2.33 nV/cm/$\sqrt{\text{Hz}}$ at the receiving antenna, which corresponds to an enhancement of approximately 17.9 dB compared to the optimized bare vapor cell configuration. Our findings offer a practical and effective route to boost the sensitivity of Rydberg atomic sensors, facilitating their adoption in real-world microwave metrology and wireless communication applications where weak free-space electric fields must be reliably measured.

physics.atom-ph↗

arXiv2026

Optical Chopping Enhanced Rydberg-Atom-Based Ultra-Low-Frequency Electric Field Measurement

This study demonstrates a significant enhancement in ultra-low-frequency (ULF) electric field sensitivity using Rydberg atoms via an optical chopping amplification (OCA) technique. Conventional Rydberg-based ULF measurements are fundamentally limited by 1/f noise, which severely degrades sensitivity. Our approach modulates the coupling laser with an optical chopper before the vapor cell, inducing periodic Rydberg excitation at the chopping frequency. The photodetector (PD) output signal is demodulated by a lock-in amplifier (LIA) using the optical chopper's signal as the reference. This process effectively improves the signal-to-noise ratio (SNR) by shifting the 1/f noise to a higher frequency band where it can be filtered out. The OCA technique enhanced sensitivity by 19.1 dB for the frequency 7 Hz, which is down to 49.1 uV/cm/rt(Hz). For the frequency range from 10Hz to 1kHz, it also enhanced nearly 7dB. This OCA method for enhancing the sensitivity of Rydberg atoms in ULF electric field measurements enables the Rydberg sensor's detection range to span the entire spectrum from low frequency (LF) to ULF, thereby significantly broadening its application potential.

quant-ph↗

arXiv2025

Fresnel Magnetic Imaging of Ultrasmall Skyrmion Lattices

Magnetic skyrmions with ultrasmall nanometric dimensions hold significant promise for next-generation high-density spintronic devices. Direct real-space imaging of these topological spin textures is critical for elucidating their emergent properties at the nanoscale. Here, we present Lorentz transmission electron microscopy studies of nanometric skyrmion lattices in B20-structured Mn0.5Fe0.5Ge crystals using Fresnel mode. According to conventional chiral discrimination methods relying on static bright-dark contrast, we demonstrate an abnormal periodic chiral-reversal phenomenon retrieved through the transport of intensity equation analysis of defocus-dependent Fresnel images. Through systematic off-axis electron holography experiments and numerical simulations, we attribute these chiral misinterpretations to the sinusoidal modulation mechanism of the contrast transfer functionthat correlates with both defocus values and skyrmion dimensions. Our findings establish quantitative limitations of conventional Fresnel contrast analysis for ultrasmall skyrmions while revealing fundamental insights into defocus-mediated phase-to-intensity conversion processes in nanoscale magnetic imaging.

cond-mat.mtrl-sci↗

arXiv2025

Stable skyrmion bundles at room temperature and zero magnetic field in a chiral magnet

Topological spin textures are characterized by topological magnetic charges, Q, which govern their electromagnetic properties. Recent studies have achieved skyrmion bundles with arbitrary integer values of Q, opening possibilities for exploring topological spintronics based on Q. However, the realization of stable skyrmion bundles in chiral magnets at room temperature and zero magnetic field - the prerequisite for realistic device applications - has remained elusive. Here, through the combination of pulsed currents and reversed magnetic fields, we experimentally achieve skyrmion bundles with different integer Q values - reaching a maximum of 24 at above room temperature and zero magnetic field - in the chiral magnet Co8Zn10Mn2. We demonstrate the field-driven annihilation of high-Q bundles and present a phase diagram as a function of temperature and field. Our experimental findings are consistently corroborated by micromagnetic simulations, which reveal the nature of the skyrmion bundle as that of skyrmion tubes encircled by a fractional Hopfion.

cond-mat.mes-hall↗

arXiv2025

Satellite Signal Detection via Rydberg-Atom Receiver

Rydberg-atom receivers aim for ultra-high sensitivity to microwave fields through various techniques, but receiving satellite signals has remained a significant challenge, due to the difficulty of capturing weak microwaves over long distances. In this work, we introduce a high-gain antenna to focus satellite signals, and then apply into an atomic cell via a microwave cavity. Using microwave-enhanced coupling, the minimum detectable power of incident microwave is down to -128 dBm, and the corresponding sensitivity is estimated as 21 nV/cm/Hz1/2 at frequency of 3.80 GHz. Furthermore, beacon signal from geostationary satellites is captured with Rydberg sensors for the first time, without the need for a low-noise amplifier. And C-band modulated signals are read out with a signal-to-noise ratio of 8 dB. Our results mark a significant breakthrough in facilitating satellite communications using Rydberg-atom receivers.

quant-ph↗

arXiv2025

Quantum Weak Measurement Amplifies Dispersion Signal of Rydberg Atomic System

Rydberg atoms, with their long coherence time and large electric dipole moment, are pivotal in quantum precision measurement. In the process of approaching the standard quantum limit, higher demands are placed on detection schemes. This paper presents a scheme to amplify dispersion signal of Rydberg atomic microwave detection system, using a quantum weak measurement technique together with improved dimensionless pointer. The scheme effectively mitigates the impact of technical noise and can be used to achieve a measurement precision close to the limit set by atomic shot noise in theory. Compared with the superheterodyne method based on transmission detection, our scheme has been experimentally proved to have a sensitivity increase of 5$\sim$6 dB. In this work, the Rydberg dispersion signal amplification mechanism offers a approach to enhance microwave detection sensitivity, which also facilitates deeper investigations into its dynamic processes and further applications of this mechanism in quantum communication and quantum control.

quant-ph↗

arXiv2025

ACE, Action and Control via Explanations: A Proposal for LLMs to Provide Human-Centered Explainability for Multimodal AI Assistants

In this short paper we address issues related to building multimodal AI systems for human performance support in manufacturing domains. We make two contributions: we first identify challenges of participatory design and training of such systems, and secondly, to address such challenges, we propose the ACE paradigm: "Action and Control via Explanations". Specifically, we suggest that LLMs can be used to produce explanations in the form of human interpretable "semantic frames", which in turn enable end users to provide data the AI system needs to align its multimodal models and representations, including computer vision, automatic speech recognition, and document inputs. ACE, by using LLMs to "explain" using semantic frames, will help the human and the AI system to collaborate, together building a more accurate model of humans activities and behaviors, and ultimately more accurate predictive outputs for better task support, and better outcomes for human users performing manual tasks.

cs.HC↗

arXiv2024

Effects of pristine and photoaged tire wear particles and their leachable additives on key nitrogen removal processes and nitrous oxide accumulation in estuarine sediments

Global estuaries and coastal regions, acting as critical interfaces for mitigating nitrogen flux to marine, concurrently contend with contamination from tire wear particles (TWPs). However, the effects of pristine and photoaged TWP (P-TWP and A-TWP) and their leachates (P-TWPL and A-TWPL) on key nitrogen removal processes in estuarine sediments remain unclear. This study explored the responses of denitrification rate, anammox rate, and nitrous oxide (N2O) accumulation to P-TWP, A-TWP, P-TWPL, and A-TWPL exposures in estuarine sediments, and assessed the potential biotoxic substances in TWPL. Results indicate that P-TWP inhibited the denitrification rate and increased N2O accumulation without significantly impacting the anammox rate. A-TWP intensified the denitrification rate inhibition by further reducing narG gene abundance and NAR activity, and also decreased the hzo gene abundance, HZO activity, and Candidatus Kuenenia abundance, thereby slowing the anammox rate. N2O accumulation was lower after A-TWP exposure than P-TWP, with the NIR/NOS and NOR/NOS activity ratios closely associated with N2O accumulation. Batch experiments indicated that photoaging promoted Zn release from TWPL, significantly contributing to the inhibited denitrification rate and increased N2O accumulation by TWP. In addition, TWP drives changes in microbial community structure through released additives, with the abundance of DNB and AnAOB closely linked to the Zn, Mn, and As concentrations in TWPL. This study offers insights into assessing the environmental risks of TWPs in estuarine ecosystems.

q-bio.PE↗

arXiv2024

Low frequency communication based on Rydberg-atom receiver

Low frequency communication has a wide range of applications in the fields of satellite detection, underground mining, disaster relief. Rydberg atom sensor has rapidly developed in recent years, capitalizing on its calibration-free SI-traceability, large polarizabilities and transition dipole moments. A Rydberg atom sensor is capable of sensitively detecting electric field signals from DC to THz. In this work, we demonstrate low frequency communication using Rydberg atoms in a vapor cell with two parallel electrode plates inside. Three modulations, BPSK, OOK, and 2FSK, are used for the communication by Rydberg atom receiver near 100kHz. We have measured the SNR of the modulated low frequency signal received by Rydberg atoms at various emission voltages. Meanwhile, we have demonstrated IQ constellation diagram, EVM and eye diagram of the demodulated signal at different symbol rate. The EVM is measured to be 8.8% when the symbol rate is 2Kbps, 9.4% when the symbol rate is 4Kbps, and 13.7% when the symbol rate is 8Kbps. The high-fidelity digital color image transmission resulted in a peak signal-to-noise ratio of 70dB. This study proves that Rydberg-atom receiver can finely work in low frequency communication.

physics.atom-ph↗

arXiv2024

High efficient 120W 1018nm single-frequency narrow linewidth amplification based on wide-tunable DBR fiber seed source

This paper reports the achievement of 120W single-frequency narrow linewidth 1018nm laser based on wide-tunable DBR fiber seed source. The DBR structure seed source uses 8mm long doped optical fibers with a line width of 3.25k. The wavelength tuning range of this seed source exceeds 1.5 nm with the temperature range from 1{\deg}C to 95{\deg}C. The tuning wavelength and temperature show extremely high linearity, and there is no mode hopping during the tuning process. By adopting a multi-level fiber amplification structure, selecting appropriate doped fibers and optimizing their length, an output power exceeding 120W of 1018nm laser has been achieved. Measurement results indicate that the slope efficiency of the main amplification 77.3%, with an amplified spontaneous emission (ASE) suppression ratio greater than 60 dB. he output linewidth is 10.3 kHz, and the beam quality factor M2 is less than 1.3.

physics.optics↗

arXiv2024

High sensitivity measurement of ULF, VLF and LF fields with Rydberg-atom sensor

Fields with frequencies below megahertz are challenging for Rydberg-atom-based measurements, due to the low-frequency electric field screening effect that is caused by the alkali-metal atoms adsorbed on the inner surface of the container. In this paper, we investigate on electric fields measurements in the ULF, VLF and LF bands in a Cs vapor cell with built-in parallel electrodes. With optimization of the applied DC field, we achieve high-sensitive detection of the electric field at frequencies of 1kHz, 10kHz and 100kHz based on Rydberg-atom sensor, with the minimum electric field strength down to 18.0{\mu}V/cm, 6.9{\mu}V/cm and 3.0{\mu}V/cm, respectively. The corresponding sensitivity is 5.7 {\mu}V/cm/{\sqrt{Hz}}, 2.2{\mu}V/cm/{\sqrt{Hz}} and 0.95{\mu}V/cm/{\sqrt{Hz}} for ULF, VLF and LF fields, which is better than 1-cm dipole antenna. Besides, the linear dynamic range of Rydberg-atom sensor is over 50 dB. This work presents the potential to enable more applications that utilize atomic sensing technology in ULF, VLF and LF fields.

physics.atom-ph↗

arXiv2024

Magnetism measurements of two-dimensional van der Waals antiferromagnet CrPS4 using dynamic cantilever magnetometry

Recent experimental and theoretical work has focused on two-dimensional van der Waals (2D vdW) magnets due to their potential applications in sensing and spintronics devises. In measurements of these emerging materials, conventional magnetometry often encounters challenges in characterizing the magnetic properties of small-sized vdW materials, especially for antiferromagnets with nearly compensated magnetic moments. Here, we investigate the magnetism of 2D antiferromagnet CrPS4 with a thickness of 8nm by using dynamic cantilever magnetometry (DCM). Through a combination of DCM experiment and the calculation based on a Stoner--Wohlfarth-type model, we unravel the magnetization states in 2D CrPS4 antiferromagnet. In the case of H parallel with c, a two-stage phase transition is observed. For H perpendicular to c, a hump in the effective magnetic restoring force is noted, which implies the presence of spin reorientation as temperature increases. These results demonstrate the benefits of DCM for studying magnetism of 2D magnets.

cond-mat.mes-hall↗

arXiv2022

Human in the loop approaches in multi-modal conversational task guidance system development

Development of task guidance systems for aiding humans in a situated task remains a challenging problem. The role of search (information retrieval) and conversational systems for task guidance has immense potential to help the task performers achieve various goals. However, there are several technical challenges that need to be addressed to deliver such conversational systems, where common supervised approaches fail to deliver the expected results in terms of overall performance, user experience and adaptation to realistic conditions. In this preliminary work we first highlight some of the challenges involved during the development of such systems. We then provide an overview of existing datasets available and highlight their limitations. We finally develop a model-in-the-loop wizard-of-oz based data collection tool and perform a pilot experiment.

cs.CL↗

arXiv2022

Direct imaging of polymer filaments pulled from rebounding drops

Polymer filaments form the foundation of biology from cell scaffolding to DNA. Their study and fabrication play an important role in a wide range of processes from tissue engineering to molecular machines. We present a simple method to deposit stretched polymer fibers between micro-pillars. This occurs when a polymeric drop impacts on and rebounds from an inclined superhydrophobic substrate. It wets the top of the pillars and pulls out liquid filaments which are stretched and can attach to adjacent pillars leaving minuscule threads, with the solvent evaporating to leave the exposed polymers. We use high-speed video at the microscale to characterize the most robust filament-forming configurations, by varying the impact velocity, substrate structure and inclination angle, as well as the PEO-polymer concentration. Impacts onto plant leaves or randomized nano-structured surface leads to the formation of a branched structure, through filament mergers at the free surface of the drop. SEM shows the deposition of filament bundles which are thinner than those formed by evaporation or rolling drops. Raman spectroscopy identifies mode B stretched DNA filaments from aqueous-solution droplets.

physics.flu-dyn↗

arXiv2021

Machine Learning Optimized Search for the $Z'$ from $U(1)_{L_\mu-L_\tau}$ at the LHC

Extending the Standard Model (SM) by a $U(1)_{L_\mu-L_\tau}$ group gives potentially significant new contributions to $g_\mu-2$, allows the construction of realistic neutrino mass matrices, incorporates lepton universality violation, and offers an anomaly-free mediator for a Dark Matter (DM) sector. In a recent analysis we showed that published LHC searches are not very sensitive to this model. Here we apply several Machine Learning (ML) algorithms in order to distinguish this model from the SM using simulated LHC data. In particular, we optimize the $3\mu$-signal, which has a considerably larger cross section than the $4\mu$-signal. Furthermore, since the $2$-muon plus missing $E_T$ final state gets contributions from diagrams involving DM particles, we optimize it as well. We find greatly improved sensitivity, which already for $36$ fb$^{-1}$ of data exceeds the combination of published LHC and non-LHC results. We also emphasize the usefulness of Boosted Decision Trees which, unlike Neural Networks, easily allow to extract additional information from the data which directly connect to the theoretical model through feature importance. The same scheme could be used to analyze other models.

hep-ph↗

arXiv2021

Unexpected Suppression of Leidenfrost Phenomenon on Superhydrophobic Surfaces

The Leidenfrost phenomenon entails the levitation of a liquid droplet over a superheated surface, cushioned by its vapor layer. For water, superhydrophobic surfaces are believed to suppress the Leidenfrost point ($\it{T}$$_{\rm L}$)-the temperature at which this phenomenon occurs. The vapor film obstructs boiling heat transfer in heat exchangers, thereby compromising energy efficiency and safety. Thus, it is desirable to realize superhydrophobicity without suppressing $\it{T}$$_{\rm L}$. Here we demonstrate that the $\it{T}$$_{\rm L}$ of water on microtextured superhydrophobic surfaces comprising doubly reentrant pillars (DRPs) can exceed those on hydrophilic and even superhydrophilic surfaces. We disentangle the contributions of microtexture, heat transfer, and surface chemistry on $\it{T}$$_{\rm L}$ and reveal how superhydrophobicity can be realized without suppressing $\it{T}$$_{\rm L}$. For instance, silica surfaces with DRPs facilitate ~300% greater heat transfer to water droplets at 200$^{\circ}$C in comparison with silica surfaces coated with perfluorinated-nanoparticles. Thus, superhydrophobic surfaces could be harnessed for energy efficient thermal machinery.

physics.flu-dyn↗