arXiv subjects

Mia Liu

Publications and source records attributed to Mia Liu.

At least 19 recordsLinked to original sources

arXiv2026

HEPTv2: End-to-End Efficient Point Transformer for Charged Particle Reconstruction

Charged-particle tracking -- reconstructing trajectories from sparse detector measurements -- is a fundamental high-energy-physics inference problem and a canonical example of learning under extreme combinatorial ambiguity. At the High-Luminosity Large Hadron Collider (HL-LHC), tracking must remain accurate and efficient despite unprecedented collision densities. Graph neural networks perform strongly, but incur substantial costs from graph construction and processing, while transformer-based approaches rely on auxiliary stages that prevent end-to-end optimization. To address this, we present HEPTv2, an end-to-end point-transformer architecture that reconstructs tracks from detector hits in one trainable pipeline. HEPTv2 combines a locality-aware point encoder with a track decoder that predicts complete trajectories without graph-building, clustering, or filtering. The encoder uses locality-sensitive hashing in detector coordinate space to preserve tracking-relevant geometry while enabling efficient local attention. The decoder resolves ambiguities through sectorized decoding and direct hit-to-track prediction under joint encoder-decoder supervision, allowing the full pipeline to be optimized end-to-end. On TrackML, HEPTv2 achieves 98.6% double-majority tracking efficiency at a 0.8% fake rate, while requiring only $\sim$15~ms inference time and 0.4~GB peak memory per event on a NVIDIA A100 GPU. Latency and memory scale approximately linearly for events with up to $5\times10^5$ hits. HEPTv2 establishes a new state of the art in the accuracy-latency trade-off, improving efficiency by 4.5% over the strongest prior transformer and by 1.1--2.2% over optimized graph-based pipelines, while reducing latency by factors of 7 and 38--52, respectively. These results show end-to-end transformers can deliver the accuracy and efficiency required for real-time particle reconstruction at the HL-LHC.

hep-ex↗

arXiv2026

PQuantML: A Tool for End-to-End Hardware-aware Model Compression

PQuantML is a new open-source, hardware-aware neural network model compression library tailored to end-to-end workflows. Motivated by the need to deploy performant models to environments with strict latency constraints, PQuantML simplifies training of compressed models by providing a unified interface to apply pruning and quantization, either jointly or individually. The library implements multiple pruning methods with different granularities, as well as fixed-point quantization with support for High-Granularity Quantization. We evaluate PQuantML on representative tasks such as the jet substructure classification, so-called jet tagging, an on-edge problem related to real-time LHC data processing. Using various pruning methods with fixed-point quantization, PQuantML achieves substantial parameter and bit-width reductions while maintaining accuracy. The resulting compression is further compared against existing tools, such as QKeras and HGQ.

cs.LG↗

arXiv2026

On-chip probabilistic inference for charged-particle tracking at the sensor edge

Modern scientific instruments operate under increasingly extreme constraints on bandwidth, latency, and power. Inference at the sensor edge determines experimental data collection efficiency by deciding which information to save for further analysis. Particle tracking detectors at the Large Hadron Collider exemplify this challenge: pixelated silicon sensors generate rich spatiotemporal ionization patterns, yet most of this information is discarded due to data-rate limitations. Concurrently, advancements in co-design tools provide rapid turn-around for incorporating machine learning into application-specific integrated circuits, motivating designs for particle detectors with new integrated technologies. We demonstrate that neural networks embedded in the front-end electronics can infer charged-particle kinematic parameters from a single silicon layer. We regress hit positions and incident angles with calibrated uncertainties, while satisfying stringent constraints on numerical precision, latency, and silicon area. Our results establish a path toward probabilistic inference directly at the edge, opening new opportunities for intelligent sensing in high-rate scientific instruments.

physics.ins-det↗

arXiv2025

hls4ml: A Flexible, Open-Source Platform for Deep Learning Acceleration on Reconfigurable Hardware

We present hls4ml, a free and open-source platform that translates machine learning (ML) models from modern deep learning frameworks into high-level synthesis (HLS) code that can be integrated into full designs for field-programmable gate arrays (FPGAs) or application-specific integrated circuits (ASICs). With its flexible and modular design, hls4ml supports a large number of deep learning frameworks and can target HLS compilers from several vendors, including Vitis HLS, Intel oneAPI and Catapult HLS. Together with a wider eco-system for software-hardware co-design, hls4ml has enabled the acceleration of ML inference in a wide range of commercial and scientific applications where low latency, resource usage, and power consumption are critical. In this paper, we describe the structure and functionality of the hls4ml platform. The overarching design considerations for the generated HLS code are discussed, together with selected performance results.

cs.AR↗

arXiv2025

Sensor Co-design for $\textit{smartpixels}$

Pixel tracking detectors at upcoming collider experiments will see unprecedented charged-particle densities. Real-time data reduction on the detector will enable higher granularity and faster readout, possibly enabling the use of the pixel detector in the first level of the trigger for a hadron collider. This data reduction can be accomplished with a neural network (NN) in the readout chip bonded with the sensor that recognizes and rejects tracks with low transverse momentum (p$_T$) based on the geometrical shape of the charge deposition (``cluster''). To design a viable detector for deployment at an experiment, the dependence of the NN as a function of the sensor geometry, external magnetic field, and irradiation must be understood. In this paper, we present first studies of the efficiency and data reduction for planar pixel sensors exploring these parameters. A smaller sensor pitch in the bending direction improves the p$_T$ discrimination, but a larger pitch can be partially compensated with detector depth. An external magnetic field parallel to the sensor plane induces Lorentz drift of the electron-hole pairs produced by the charged particle, broadening the cluster and improving the network performance. The absence of the external field diminishes the background rejection compared to the baseline by $\mathcal{O}$(10%). Any accumulated radiation damage also changes the cluster shape, reducing the signal efficiency compared to the baseline by $\sim$ 30 - 60%, but nearly all of the performance can be recovered through retraining of the network and updating the weights. Finally, the impact of noise was investigated, and retraining the network on noise-injected datasets was found to maintain performance within 6% of the baseline network trained and evaluated on noiseless data.

physics.ins-det↗

arXiv2025

Characterization of a 28 nm $\textit{smartpixels}$ ASIC With On-Chip ML for Particle Tracking Detectors

We present a 28 nm CMOS pixel readout integrated circuit implementing in-pixel analog signal processing and on-chip machine learning data filtering for particle tracking detectors. Our ASIC comprises two $32 \times 8$ pixel matrices with a pixel pitch of $25 \times 25~\mu\mathrm{m}^2$, in which each pixel integrates a charge-sensitive amplifier with synchronous auto-zero offset cancellation and a 2-bit flash ADC with programmable thresholds. Two analog front-end architectures, single-ended and differential, are implemented and characterized. Digitized pixel data are combined into row-wise projections and processed by an on-chip, fully combinational neural network classifier for data reduction. Measurements at room temperature using charge injection demonstrate an equivalent noise charge of $54.6~\mathrm{e}^{-}$ and a threshold dispersion of $\sim$78.2~\unit{\electron} at nominal bias, linear response up to several~\unit{\kilo\electron}, and stable operation at a 10~MHz clock frequency. The neural network output is compared with offline RTL predictions and agrees for $99.06\%$ of $1.5 \times 10^{5}$ test inputs.

physics.ins-det↗

arXiv2025

Locality-Sensitive Hashing-Based Efficient Point Transformer for Charged Particle Reconstruction

Charged particle track reconstruction is a foundational task in collider experiments and the main computational bottleneck in particle reconstruction. Graph neural networks (GNNs) have shown strong performance for this problem, but costly graph construction, irregular computations, and random memory access patterns substantially limit their throughput. The recently proposed Hashing-based Efficient Point Transformer (HEPT) offers a theoretically guaranteed near-linear complexity for large point cloud processing via locality-sensitive hashing (LSH) in attention computations; however, its evaluations have largely focused on embedding quality, and the object condensation pipeline on which HEPT relies requires a post-hoc clustering step (e.g., DBScan) that can dominate runtime. In this work, we make two contributions. First, we present a unified, fair evaluation of physics tracking performance for HEPT and a representative GNN-based pipeline under the same dataset and metrics. Second, we introduce HEPTv2 by extending HEPT with a lightweight decoder that eliminates the clustering stage and directly predicts track assignments. This modification preserves HEPT's regular, hardware-friendly computations while enabling ultra-fast end-to-end inference. On the TrackML dataset, optimized HEPTv2 achieves approximately 28 ms per event on an A100 while maintaining competitive tracking efficiency. These results position HEPTv2 as a practical, scalable alternative to GNN-based pipelines for fast tracking.

hep-ex↗

arXiv2025

SuperSONIC: Cloud-Native Infrastructure for ML Inferencing

The increasing computational demand from growing data rates and complex machine learning (ML) algorithms in large-scale scientific experiments has driven the adoption of the Services for Optimized Network Inference on Coprocessors (SONIC) approach. SONIC accelerates ML inference by offloading it to local or remote coprocessors to optimize resource utilization. Leveraging its portability to different types of coprocessors, SONIC enhances data processing and model deployment efficiency for cutting-edge research in high energy physics (HEP) and multi-messenger astrophysics (MMA). We developed the SuperSONIC project, a scalable server infrastructure for SONIC, enabling the deployment of computationally intensive tasks to Kubernetes clusters equipped with graphics processing units (GPUs). Using NVIDIA Triton Inference Server, SuperSONIC decouples client workflows from server infrastructure, standardizing communication, optimizing throughput, load balancing, and monitoring. SuperSONIC has been successfully deployed for the CMS and ATLAS experiments at the CERN Large Hadron Collider (LHC), the IceCube Neutrino Observatory (IceCube), and the Laser Interferometer Gravitational-Wave Observatory (LIGO) and tested on Kubernetes clusters at Purdue University, the National Research Platform (NRP), and the University of Chicago. SuperSONIC addresses the challenges of the Cloud-native era by providing a reusable, configurable framework that enhances the efficiency of accelerator-based inference deployment across diverse scientific domains and industries.

cs.DC↗

arXiv2025

Building Machine Learning Challenges for Anomaly Detection in Science

Scientific discoveries are often made by finding a pattern or object that was not predicted by the known rules of science. Oftentimes, these anomalous events or objects that do not conform to the norms are an indication that the rules of science governing the data are incomplete, and something new needs to be present to explain these unexpected outliers. The challenge of finding anomalies can be confounding since it requires codifying a complete knowledge of the known scientific behaviors and then projecting these known behaviors on the data to look for deviations. When utilizing machine learning, this presents a particular challenge since we require that the model not only understands scientific data perfectly but also recognizes when the data is inconsistent and out of the scope of its trained behavior. In this paper, we present three datasets aimed at developing machine learning-based anomaly detection for disparate scientific domains covering astrophysics, genomics, and polar science. We present the different datasets along with a scheme to make machine learning challenges around the three datasets findable, accessible, interoperable, and reusable (FAIR). Furthermore, we present an approach that generalizes to future machine learning challenges, enabling the possibility of large, more compute-intensive challenges that can ultimately lead to scientific discovery.

cs.LG↗

arXiv2025

Performance measurements of the electromagnetic calorimeter and readout electronics system for the DarkQuest experiment

This paper presents performance measurements of a new readout electronics system based on silicon photomultipliers for the PHENIX electromagnetic calorimeter. Installation of the lead-scintillator Shashlik style calorimeter into the SeaQuest/SpinQuest spectrometer has been proposed to broaden the experiment's dark sector search program, an upgrade known as DarkQuest. The calorimeter and electronics system were subjected to testing and calibration at the Fermilab Test Beam Facility. Detailed studies of the energy response and resolution, as well as particle identification capabilities, were performed. The background rate in the actual experimental environment was also examined. The system is found to be well-suited for a dark sector search program on the Fermilab 120 GeV proton beamline.

physics.ins-det↗

arXiv2024

Locality-Sensitive Hashing-Based Efficient Point Transformer with Applications in High-Energy Physics

This study introduces a novel transformer model optimized for large-scale point cloud processing in scientific domains such as high-energy physics (HEP) and astrophysics. Addressing the limitations of graph neural networks and standard transformers, our model integrates local inductive bias and achieves near-linear complexity with hardware-friendly regular operations. One contribution of this work is the quantitative analysis of the error-complexity tradeoff of various sparsification techniques for building efficient transformers. Our findings highlight the superiority of using locality-sensitive hashing (LSH), especially OR & AND-construction LSH, in kernel approximation for large-scale point cloud data with local inductive bias. Based on this finding, we propose LSH-based Efficient Point Transformer (HEPT), which combines E$^2$LSH with OR & AND constructions and is built upon regular computations. HEPT demonstrates remarkable performance on two critical yet time-consuming HEP tasks, significantly outperforming existing GNNs and transformers in accuracy and computational speed, marking a significant advancement in geometric deep learning and large-scale scientific data processing. Our code is available at https://github.com/Graph-COM/HEPT.

cs.LG↗

arXiv2023

The U.S. CMS HL-LHC R&D Strategic Plan

The HL-LHC run is anticipated to start at the end of this decade and will pose a significant challenge for the scale of the HEP software and computing infrastructure. The mission of the U.S. CMS Software & Computing Operations Program is to develop and operate the software and computing resources necessary to process CMS data expeditiously and to enable U.S. physicists to fully participate in the physics of CMS. We have developed a strategic plan to prioritize R&D efforts to reach this goal for the HL-LHC. This plan includes four grand challenges: modernizing physics software and improving algorithms, building infrastructure for exabyte-scale datasets, transforming the scientific data analysis process and transitioning from R&D to operations. We are involved in a variety of R&D projects that fall within these grand challenges. In this talk, we will introduce our four grand challenges and outline the R&D program of the U.S. CMS Software & Computing Operations Program.

hep-ex↗

arXiv2023

Applications of Deep Learning to physics workflows

Modern large-scale physics experiments create datasets with sizes and streaming rates that can exceed those from industry leaders such as Google Cloud and Netflix. Fully processing these datasets requires both sufficient compute power and efficient workflows. Recent advances in Machine Learning (ML) and Artificial Intelligence (AI) can either improve or replace existing domain-specific algorithms to increase workflow efficiency. Not only can these algorithms improve the physics performance of current algorithms, but they can often be executed more quickly, especially when run on coprocessors such as GPUs or FPGAs. In the winter of 2023, MIT hosted the Accelerating Physics with ML at MIT workshop, which brought together researchers from gravitational-wave physics, multi-messenger astrophysics, and particle physics to discuss and share current efforts to integrate ML tools into their workflows. The following white paper highlights examples of algorithms and computing frameworks discussed during this workshop and summarizes the expected computing needs for the immediate future of the involved fields.

hep-ex↗

arXiv2023

Interpretable Geometric Deep Learning via Learnable Randomness Injection

Point cloud data is ubiquitous in scientific fields. Recently, geometric deep learning (GDL) has been widely applied to solve prediction tasks with such data. However, GDL models are often complicated and hardly interpretable, which poses concerns to scientists who are to deploy these models in scientific analysis and experiments. This work proposes a general mechanism, learnable randomness injection (LRI), which allows building inherently interpretable models based on general GDL backbones. LRI-induced models, once trained, can detect the points in the point cloud data that carry information indicative of the prediction label. We also propose four datasets from real scientific applications that cover the domains of high-energy physics and biochemistry to evaluate the LRI mechanism. Compared with previous post-hoc interpretation methods, the points detected by LRI align much better and stabler with the ground-truth patterns that have actual scientific meanings. LRI is grounded by the information bottleneck principle, and thus LRI-induced models are also more robust to distribution shifts between training and test scenarios. Our code and datasets are available at \url{https://github.com/Graph-COM/LRI}.

cs.LG↗

arXiv2022

Data Science and Machine Learning in Education

The growing role of data science (DS) and machine learning (ML) in high-energy physics (HEP) is well established and pertinent given the complex detectors, large data, sets and sophisticated analyses at the heart of HEP research. Moreover, exploiting symmetries inherent in physics data have inspired physics-informed ML as a vibrant sub-field of computer science research. HEP researchers benefit greatly from materials widely available materials for use in education, training and workforce development. They are also contributing to these materials and providing software to DS/ML-related fields. Increasingly, physics departments are offering courses at the intersection of DS, ML and physics, often using curricula developed by HEP researchers and involving open software and data used in HEP. In this white paper, we explore synergies between HEP research and DS/ML education, discuss opportunities and challenges at this intersection, and propose community activities that will be mutually beneficial.

physics.ed-ph↗

arXiv2022

Physics Community Needs, Tools, and Resources for Machine Learning

Machine learning (ML) is becoming an increasingly important component of cutting-edge physics research, but its computational requirements present significant challenges. In this white paper, we discuss the needs of the physics community regarding ML across latency and throughput regimes, the tools and resources that offer the possibility of addressing these needs, and how these can be best utilized and accessed in the coming years.

cs.LG↗

arXiv2021

Applications and Techniques for Fast Machine Learning in Science

In this community review report, we discuss applications and techniques for fast machine learning (ML) in science -- the concept of integrating power ML methods into the real-time experimental data processing loop to accelerate scientific discovery. The material for the report builds on two workshops held by the Fast ML for Science community and covers three main areas: applications for fast ML across a number of scientific domains; techniques for training and implementing performant and resource-efficient ML algorithms; and computing architectures, platforms, and technologies for deploying these algorithms. We also present overlapping challenges across the multiple scientific domains where common solutions can be found. This community report is intended to give plenty of examples and inspiration for scientific discovery through integrated and accelerated ML solutions. This is followed by a high-level overview and organization of technical advances, including an abundance of pointers to source material, which can enable these breakthroughs.

cs.LG↗

arXiv2021

Fast convolutional neural networks on FPGAs with hls4ml

We introduce an automated tool for deploying ultra low-latency, low-power deep neural networks with convolutional layers on FPGAs. By extending the hls4ml library, we demonstrate an inference latency of $5\,μ$s using convolutional architectures, targeting microsecond latency applications like those at the CERN Large Hadron Collider. Considering benchmark models trained on the Street View House Numbers Dataset, we demonstrate various methods for model compression in order to fit the computational constraints of a typical FPGA device used in trigger and data acquisition systems of particle detectors. In particular, we discuss pruning and quantization-aware training, and demonstrate how resource utilization can be significantly reduced with little to no loss in model accuracy. We show that the FPGA critical resource consumption can be reduced by 97% with zero loss in model accuracy, and by 99% when tolerating a 6% accuracy degradation.

cs.LG↗