arXiv subjects

Miaofang Chi

Publications and source records attributed to Miaofang Chi.

At least 19 recordsLinked to original sources

arXiv2026

Deterministic fabrication of large-area, high-crystallinity oxide moire superlattices

Oxide twistronics extends moire engineering beyond van der Waals materials, offering a promising platform for accessing emergent interfacial phenomena arising from the strong coupling of lattice, charge, and orbital degrees of freedom in complex oxides. However, deterministic fabrication of high-crystallinity oxide moire superlattices over large lateral dimensions remains challenging due to the three-dimensional bonding network of oxides. Here, we demonstrate a scalable, generalized fabrication strategy that enables the formation of high-crystallinity oxide moire superlattices with clean, chemically bonded interfaces and precisely controlled twist angles down to nominal values of 0.1 degree, achieving sub-degree twist-angle accuracy across large contiguous lateral dimensions approaching the millimeter scale. Using NaNbO3 as a model system, we show that the resulting interlayer coupling drives pronounced structural reconstruction that modifies both the phase structure and ferroelectric domain configuration. Synchrotron-based X-ray 3D reciprocal space mapping reveals the emergence of a single-phase state in twisted bilayers, in contrast to the mixed-phase structure observed in single-layer membranes prior to twist assembly. The structural signatures are further consistent with gradual lattice rotation distributed along the thickness direction that may accommodate interfacial shear strain, distinct from reconstruction observed in van der Waals moire systems, which primarily occurs through in-plane stacking rearrangement. This collective lattice response is correlated with twist-dependent nanoscale electromechanical modulations observed by piezoresponse force microscopy. These results establish a scalable materials platform for oxide twistronics and open new pathways towards integrating twist-engineered complex oxides into practical, macroscale device architectures.

cond-mat.mtrl-sci↗

arXiv2026

Inference-Sufficient Representations for High-Throughput Measurement: Lessons from Lossless Compression Benchmarks in 4D-STEM

Four-dimensional scanning transmission electron microscopy (4D-STEM) generates multi-gigabyte datasets, creating a growing mismatch between acquisition rates and practical storage, transfer, and interactive visualization capabilities. We systematically benchmark 13 lossless compression implementations across 5 representative datasets (8~MiB to 8~GiB, 49.5--92.8\% sparsity), with 10 independent runs per method. HDF5 provides built-in gzip compression, of which gzip-9 typically achieves the highest compression ratio but is slow. We therefore evaluate widely available alternatives (via hdf5plugin), including the Blosc family. As a representative comparison, blosc\_zstd achieves compression comparable to gzip-9 (mean 13.5$\times$ vs 12.3$\times$) while compressing 19--69$\times$ faster and reading 1.9--2.6$\times$ faster across datasets. Compression ratios are deterministic, and timing measurements are highly reproducible (CV $<$2\%). Compression performance follows a power law with sparsity ($R^2 = 0.99$), ranging from 5$\times$ for moderately sparse data to 35$\times$ for highly sparse data. We identify six top-performing implementations optimized for different use cases and demonstrate that 4D-STEM data can be routinely compressed by $>$10$\times$. While these results provide practical guidance for lossless compression selection, the broader conclusion is that lossless compression preserves measurements but does not by itself guarantee sustainable high-throughput workflows. As detector rates rise, data handling will increasingly require inference-driven representations -- i.e., deciding what must be preserved to support a scientific inference, rather than defaulting to storing fully dense raw measurements.

eess.SP↗

arXiv2026

Establishing Atomic Coherence in Twisted Oxide Membranes Containing Volatile Elements

Twisted oxide membranes represent a promising platform for exploring moire physics and emergent quantum phenomena. However, the presence of amorphous interfacial dead layers in conventional oxide heterostructures impedes coherent coupling and suppresses moire-induced interactions. While high-temperature thermal treatments can facilitate interfacial bonding, additional care is needed for materials containing volatile elements, where elevated temperatures may cause elemental loss. This study demonstrates the realization of atomically coherent, chemically bonded interface in twisted NaNbO3 heterostructures through controlled oxygen-annealing treatment. Atomic-resolution imaging and spectroscopy reveal ordered perovskite registry accompanied by systematic lattice contraction and modified electronic structure at the twisted interface, providing signatures of chemical reconstruction rather than physical adhesion. This reconstructed interface mediates highly asymmetric strain propagation in which the bottom membrane remains nearly relaxed while the top membrane accommodates substantial shear strain, thereby establishing a strain gradient that enables long-range electromechanical coupling throughout the twisted oxide membranes. By resolving the nature of the reconstructed interface, these findings establish a robust pathway for achieving coherent and strain-tunable oxide moire superlattices, opening pathways to engineer emergent ferroic and electronic functionalities.

cond-mat.mtrl-sci↗

arXiv2025

$\alpha$-RuCl$_3$ intercalated into graphite: a new three-dimensional platform for exotic quantum phases

Multilayer graphene with different stacking sequences has emerged as a powerful setting for correlated and topological phases. In parallel, progress in graphene heterostructures with magnetic or correlated materials-most notably the Kitaev candidate $\alpha$-RuCl$_3$-has demonstrated charge transfer, magnetic proximity effects, and interfacial reconstruction, creating new opportunities for engineered quantum systems. Motivated by these developments, we explore a three-dimensional analogue in which $\alpha$-RuCl$_3$ layers are inserted directly into the van der Waals gaps of graphite, forming an intercalated system. Here, we report the successful synthesis and comprehensive characterization of graphite intercalated with $\alpha$-RuCl$_3$. Using a combination of X-ray diffraction, quantum oscillation measurements, and first-principles electronic structure calculations, we study the structural and electronic properties of these intercalated crystals. Our results demonstrate that graphite intercalated with $\alpha$-RuCl$_3$ offers a robust route to develop three-dimensional materials with access to novel correlated and topological states.

cond-mat.str-el↗

arXiv2025

Ultralow-Temperature Cryogenic Transmission Electron Microscopy Using a New Helium Flow Cryostat Stage

Advances in cryogenic electron microscopy have opened new avenues for probing quantum phenomena in correlated materials. This study reports the installation and performance of a new side-entry condenZero cryogenic cooling system for JEOL (Scanning) Transmission Electron Microscopes (S/TEM), utilizing compressed liquid helium (LHe) and designed for imaging and spectroscopy at ultra-low temperatures. The system includes an external dewar mounted on a vibration-damping stage and a pressurized, low-noise helium transfer line with a remotely controllable needle valve, ensuring stable and efficient LHe flow with minimal thermal and mechanical noise. Performance evaluation demonstrates a stable base temperature of 6.58 K measured using a Cernox bare chip sensor on the holder with temperature fluctuations within 0.04 K. Complementary in-situ electron energy-loss spectroscopy (EELS) via aluminum bulk plasmon analysis was used to measure the local specimen temperature and validate cryogenic operation during experiments. The integration of cryogenic cooling with other microscopy techniques, including electron diffraction and Lorentz TEM, was demonstrated by resolving charge density wave (CDW) transitions in NbSe2 using electron diffraction, and imaging nanometric magnetic skyrmions in MnSi via Lorentz TEM. This platform provides reliable cryogenic operation below 7 K, establishing a low-drift route for direct visualization of electronic and magnetic phase transformations in quantum materials.

cond-mat.str-el↗

arXiv2025

Liquid Helium Cryogenic TEM below 1 Å

Next-generation cryogenic transmission electron microscopes (TEM) aim to achieve high-resolution imaging at ultracold sample temperatures (< 90 K) and over extended hold times. Lower temperatures enable atomic-scale characterization with improved beam and dose resilience for organic specimens and access to emergent electronic phases in quantum materials. Side-entry liquid helium cooling stages presently lack the mechanical and thermal stability required to support sub-Angstrom information transfer in modern TEM. Here we demonstrate sub-Angstrom atomic imaging TEM with a side-entry stage at specimen temperatures down to ~20K and with low stage drift and stable hold times.

physics.ins-det↗

arXiv2025

Antiferroelectric Hafnia Down to the 2D Limit

Antiferroelectricity is a material property characterized by alternating electric dipoles spontaneously ordered in antiparallel directions. Antiferroelectrics are promising for energy storage, solid-state cooling, and memory technologies; however, these materials are scarce, and their scalability remains largely unexplored. In this work, we demonstrate that single-crystalline hafnia, a lead-free CMOS-compatible material, exhibits antiferroelectricity under compressive-strain conditions. We observe antiparallel sublattice polarization and stable double-hysteresis in single-crystalline (111)-oriented epitaxial La-doped hafnia films grown on yttrium-stabilized zirconia and show that the antipolar orthorhombic phase of hafnia adheres to the Kittel model of antiferroelectricity. Notably, compressive strain strengthens the antiferroelectric order in thinner La-doped hafnia films, achieving an unprecedented 850 C ordering temperature in the two-dimensional limit, highlighting hafnia's potential for advanced antiferroelectric devices.

cond-mat.mtrl-sci↗

arXiv2025

Towards Atomic-Scale Control over Structural Modulations in Quasi-1D Chalcogenides for Colossal Optical Anisotropy

Optically anisotropic materials are sought after for tailoring the polarization of light. Recently, colossal optical anisotropy was reported in a quasi-one-dimensional chalcogenide, Sr1.125TiS3. Compared to SrTiS3, the excess Sr in Sr1.125TiS3 leads to periodic structural modulations and introduces additional electrons that undergo charge ordering on select Ti atoms to form a highly polarizable cloud oriented along the c-axis, hence, resulting in the colossolal optical anisotropy. Here, further enhancement of the colossal optical anisotropy to 2.5 in Sr1.143TiS3 is reported through control over the periodicity of the atomic-scale modulations. The role of structural modulations in tuning the optical properties in a series of SrxTiS3 compounds has been investigated using DFT calculations. The structural modulations arise from various stacking sequences of face-sharing TiS6 octahedra and twist-distorted trigonal prisms, and are found to be thermodynamically stable for x larger than 1 but smaller than 1.5. As x increases, an indirect-to-direct band gap transition is predicted for x equal to and larger than 1.143 along with an increased occupancy of Ti-dz2 states. Together, these two factors result in a theoretically predicted maximum birefriengence of 2.5 for Sr1.143TiS3. Single crystals of Sr1.143TiS3 were grown using a molten-salt flux method. Atomic-scale observations using scanning transmission electron microscopy confirm the feasibility of synthesizing SrxTiS3 with varied modulation periodicities. Overall, these findings demonstrate compositonal tunability of optical properties in SrxTiS3 compounds, and potentially in other hexagonal perovskites having structural modulations.

cond-mat.mtrl-sci↗

arXiv2025

Three-dimensional imaging of individual carbon atoms

Carbon is fundamental to science and technology due to its diverse bonding configurations, structural versatility, and essential role in defining the mechanical, chemical, electronic, and quantum properties of materials. However, direct three-dimensional (3D) imaging of individual carbon atoms remains a long-standing challenge. Here, we use twisted bilayer graphene (TBG) as a model system and demonstrate ptychographic atomic electron tomography (pAET) for determining the 3D atomic coordinates of individual carbon atoms with a precision of 0.11 angstrom. The resulting 3D atomic model uncovers chiral lattice distortions driven by van der Waals interactions that exhibit meron-like and skyrmion-like structural textures. These findings provide direct insight into the interplay between 3D chiral lattice deformation and electronic properties in moire-engineered carbon systems. Beyond TBG, pAET offers a versatile approach for 3D atomic-scale imaging of carbon-based and other light-element materials that are central to advances in physics, chemistry, materials science, and nanotechnology.

cond-mat.mtrl-sci↗

arXiv2025

Revealing Local Structures through Machine-Learning- Fused Multimodal Spectroscopy

Atomistic structures of materials offer valuable insights into their functionality. Determining these structures remains a fundamental challenge in materials science, especially for systems with defects. While both experimental and computational methods exist, each has limitations in resolving nanoscale structures. Core-level spectroscopies, such as x-ray absorption (XAS) or electron energy-loss spectroscopies (EELS), have been used to determine the local bonding environment and structure of materials. Recently, machine learning (ML) methods have been applied to extract structural and bonding information from XAS/EELS, but most of these frameworks rely on a single data stream, which is often insufficient. In this work, we address this challenge by integrating multimodal ab initio simulations, experimental data acquisition, and ML techniques for structure characterization. Our goal is to determine local structures and properties using EELS and XAS data from multiple elements and edges. To showcase our approach, we use various lithium nickel manganese cobalt (NMC) oxide compounds which are used for lithium ion batteries, including those with oxygen vacancies and antisite defects, as the sample material system. We successfully inferred local element content, ranging from lithium to transition metals, with quantitative agreement with experimental data. Beyond improving prediction accuracy, we find that ML model based on multimodal spectroscopic data is able to determine whether local defects such as oxygen vacancy and antisites are present, a task which is impossible for single mode spectra or other experimental techniques. Furthermore, our framework is able to provide physical interpretability, bridging spectroscopy with the local atomic and electronic structures.

cond-mat.mtrl-sci↗

arXiv2024

Quantitative Phase Retrieval and Characterization of Magnetic Nanostructures via Lorentz (Scanning) Transmission Electron Microscopy

Magnetic materials phase reconstruction from Lorentz transmission electron microscopy (LTEM) measurements has traditionally been achieved using longstanding methods such as off-axis holography (OAH) and the transport-of-intensity equation (TIE). Amidst the increase in access to processing power and the development of advanced algorithms, phase retrieval of nanoscale magnetic materials with higher fidelity and resolution, potentially down to the few nanometer limit, becomes possible. Specifically, reverse-mode automatic differentiation (RMAD) and the extended electron ptychography iterative engine (ePIE) are two methods that have been utilized for high confidence phase reconstructions using LTEM through-focal series imaging and Lorentz scanning TEM (Ltz-4D-STEM), respectively. This work evaluates phase retrieval using TIE, RMAD, and ePIE in simulations consisting of an array of Permalloy (Ni80Fe20) nanoscale islands. Extending beyond simulations, we demonstrate total phase reconstructions of a NiFe nanowire using OAH and RMAD in LTEM and ePIE in Ltz-4D-STEM experiments and determine the magnetization saturation through corroborations with micromagnetic simulations. Finally, we show how the total phase shift gradient can be utilized to observe and characterize the proximity effects emanating from neighboring magnetic island interactions and an isolated NiFe nanowire.

cond-mat.mtrl-sci↗

arXiv2024

Strain-driven stabilization of a room-temperature chiral multiferroic with coupled ferroaxial and ferroelectric order

Noncollinear ferroic materials are sought after as testbeds to explore the intimate connections between topology and symmetry, which result in electronic, optical and magnetic functionalities not observed in collinear ferroic materials. For example, ferroaxial materials have ordered rotational structural distortions that break mirror symmetry and induce chirality. When ferroaxial order is coupled with ferroelectricity arising from a broken inversion symmetry, it offers the prospect of electric-field-control of the ferroaxial distortions and opens up new tunable functionalities. However, chiral multiferroics, especially ones stable at room temperature, are rare. We report the discovery of a strain-stabilized, room-temperature chiral multiferroic phase in single crystals of BaTiS$_3$, a quasi-one-dimensional (1D) hexagonal chalcogenide. Using first-principles calculations, we predict the stabilization of this multiferroic phase having $P6_3$ space group for biaxial tensile strains exceeding 1.5% applied on the basal ab-plane of the room temperature $P6_3cm$ phase of BaTiS$_3$. The chiral multiferroic phase is characterized by rotational distortions of select TiS$_6$ octahedra around the long $c$-axis and polar displacement of Ti atoms along the $c$-axis. We used an innovative approach using focused ion beam milling to make appropriately strained samples of BaTiS$_3$. The ferroaxial and ferroelectric distortions, and their domains in $P6_3$-BaTiS$_3$ were directly resolved using atomic resolution scanning transmission electron microscopy. Landau-based phenomenological modeling predicts a strong coupling between the ferroelectric and the ferroaxial order making $P6_3$-BaTiS$_3$ an attractive test bed for achieving electric-field control of chirality-related phenomena such as circular photo-galvanic current and the Rashba effect.

cond-mat.mtrl-sci↗

arXiv2024

Giant Modulation of Refractive Index from Picoscale Atomic Displacements

Structural disorder has been shown to enhance and modulate magnetic, electrical, dipolar, electrochemical, and mechanical properties of materials. However, the possibility of obtaining novel optical and optoelectronic properties from structural disorder remains an open question. Here, we show unambiguous evidence of disorder in the form of anisotropic, picoscale atomic displacements modulating the refractive index tensor and resulting in the giant optical anisotropy observed in BaTiS$_3$, a quasi-one-dimensional hexagonal chalcogenide. Single crystal X-ray diffraction studies reveal the presence of antipolar displacements of Ti atoms within adjacent TiS$_6$ chains along the c-axis, and three-fold degenerate Ti displacements in the a-b plane. $^{47/49}$Ti solid-state NMR provides additional evidence for those Ti displacements in the form of a three-horned NMR lineshape resulting from a low symmetry local environment around Ti atoms. We used scanning transmission electron microscopy to directly observe the globally disordered Ti a-b plane displacements and find them to be ordered locally over a few unit cells. First-principles calculations show that the Ti a-b plane displacements selectively reduce the refractive index along the ab-plane, while having minimal impact on the refractive index along the chain direction, thus resulting in a giant enhancement in the optical anisotropy. By showing a strong connection between structural disorder with picoscale displacements and the optical response in BaTiS$_3$, this study opens a pathway for designing optical materials with high refractive index and functionalities such as large optical anisotropy and nonlinearity.

cond-mat.mtrl-sci↗

arXiv2024

Orbital degree of freedom in high entropy oxides

The spin, charge, and lattice degrees of freedom and their interplay in high entropy oxides were intensively investigated in recent years. However, how the orbital degree of freedom is affected by the extreme disorder in high entropy oxides hasn't been studied. In this work, using perovskite structured \textit{R}VO$_3$ as a materials playground, we report how the disorder arising from mixing different rare earth ions at the rare earth site affects the orbital ordering of V$^{3+}$ t$_{2g}$-electrons. Since each member of \textit{R}VO$_3$ crystallizes into the same orthorhombic \textit{Pbnm} structure, the configurational entropy should not be critical for the success synthesis of (\textit{R}$_1$,...,\textit{R}$_n$)VO$_3$. The spin and orbital ordering was studied by measuring magnetic properties and specific heat of single crystals. Rather than the number and type of rare earth ions, the average ionic radius and size variance are the key factors determining the spin and orbital order in (\textit{R}$_1$,...,\textit{R}$_n$)VO$_3$. When the size variance is small, the average ionic radius takes precedence in dictating spin and orbital order. Increasing size variance suppresses the G-type orbital order and C-type magnetic order but favors the C-OO/G-AF state and the spin-orbital entanglement. These findings suggest that the extreme disorder introduced by mixing multiple rare earth ions in high entropy perovskites might be employed to preserve the orbital degree of freedom to near the magnetic ordering temperature, which is necessary for the electronic driven orbital ordering in a Kugel-Khomskii compound.

cond-mat.mtrl-sci↗

arXiv2023

Simultaneous High-Speed and Low-Dose 4-D STEM Using Compressive Sensing Techniques

Here we show that compressive sensing allow 4-dimensional (4-D) STEM data to be obtained and accurately reconstructed with both high-speed and low fluence. The methodology needed to achieve these results compared to conventional 4-D approaches requires only that a random subset of probe locations is acquired from the typical regular scanning grid, which immediately generates both higher speed and the lower fluence experimentally. We also consider downsampling of the detector, showing that oversampling is inherent within convergent beam electron diffraction (CBED) patterns, and that detector downsampling does not reduce precision but allows faster experimental data acquisition. Analysis of an experimental atomic resolution yttrium silicide data-set shows that it is possible to recover over 25dB peak signal-to-noise in the recovered phase using 0.3% of the total data.

cond-mat.mtrl-sci↗

arXiv2023

Probing Lithium Ion Transport at Individual Interfaces

Ion transport across solid solid interfaces is often slower than through the bulk of a material, impeding the charge and discharge rate of batteries. Designing highly conductive interfaces is challenging due to the need to probe ion conduction at individual interfaces and correlate it with the local structure. In this study, we address this challenge by enabling the simultaneous measurements of local Li-dominated optical phonons and ion distributions, using high-energy and high-spatial-resolution spectroscopy in a scanning transmission electron microscope (STEM). Further, this method allows for a direct correlation of ion conduction with interfacial structures identified by STEM imaging. By examining diverse individual interfaces of LiCoO2, we reveal the sensitivity of ion conduction to interface atomic-scale structure and chemistry. Our method enables correlative analysis of ion transport behavior, and atomic and band structures, and can serve as a robust experimental approach for identifying interface structures that offer high conductivity and cyclability for batteries.

cond-mat.mtrl-sci↗

arXiv2023

Stacking disorder and thermal transport properties of $α$-RuCl$_3$

$α$-RuCl$_3$, a well-known candidate material for Kitaev quantum spin liquid, is prone to stacking disorder due to the weak van der Waals bonding between the honeycomb layers. After a decade of intensive experimental and theoretical studies, the detailed correlation between stacking degree of freedom, structure transition, magnetic and thermal transport properties remains unresolved. In this work, we reveal the effects of a small amount of stacking disorder inherent even in high quality $α$-RuCl$_3$ crystals. This small amount of stacking disorder results in the variation of the magnetic ordering temperature, suppresses the structure transition and thermal conductivity. Crystals with minimal amount of stacking disorder have a T$_N>$7.4\,K and exhibit a well-defined structure transition around 140\,K upon cooling. For those with more stacking faults and a T$_N$ below 7\,K, the structure transition occurs well below 140\,K upon cooling and is incomplete, manifested by the diffuse streaks and the coexistence of both high temperature and low temperature phases down to the lowest measurement temperature. Both types of crystals exhibit oscillatory field dependent thermal conductivity and a plateau-like feature in thermal Hall resistivity in the field-induced quantum spin liquid state. However, $α$-RuCl$_3$ crystals with minimal amount of stacking disorder have a higher thermal conductivity that pushes the thermal Hall conductivity to be closer to the half-integer quantized value. These findings demonstrate a strong correlation between layer stacking, structure transition, magnetic and thermal transport properties, underscoring the importance of interlayer coupling in $α$-RuCl$_3$ despite the weak van der Waals bonding.

cond-mat.mtrl-sci↗

arXiv2023

Real-space Visualization of Charge Density Wave Induced Local Inversion-Symmetry Breaking in a Skyrmion Magnet

Intertwining charge density wave (CDW) with spin and pairing order parameters is a major focus of contemporary condensed matter physics. Lattice distortions and local symmetry breaking resulted from CDWs are crucial for the emergence of correlated and topological states in quantum materials in general. While the presence of CDWs can be detected by diffraction or spectroscopic techniques, atomic visualization of the CDW induced lattice distortions remains limited to CDW with short wavelengths. In this letter, we realized the imaging of incommensurate long-wavelength CDWs based on cryogenic four-dimensional scanning transmission electron microscopy (cryo-4DSTEM). By visualizing the incommensurate CDW induced lattice modulations in a skyrmion magnet EuAl4, we discover two out-of-phase intra-unit cell shear modulations that specifically break the local inversion-symmetry. Our results provide direct evidence for the intertwined spin and charge orders in EuAl4 and key information about local symmetry. Furthermore, we establish cryo-4DSTEM as an indispensable approach to understand CDW induced new quantum states of matter.

cond-mat.mtrl-sci↗